Use kernel types consistently by replacing the remaining __uXX types.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add a read-port-command helper analogous to the send-port-command
helper to take care of the UART module id instead of open coding.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Add a send-port-command helper which takes care of determining the UART
module id when sending commands instead of doing so at every call site.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the vendor-request helpers by using kernel-types consistently
and using void pointers for the data arguments, which allows removing
a cast from one caller.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Unlike the TUSB5052, the TUSB3410 has an LSR TEMT bit to tell if both
the transmitter data and shift registers are empty.
Make sure to check also the shift register on TUSB3410 when waiting for
the transmit buffer to drain during close and drop the time-based
one-char delay which is otherwise needed (e.g. 90 ms at 110 bps).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The three-character drain delay was added by commit f1175daa53 ("USB:
ti_usb_3410_5052: kill custom closing_wait") when removing the custom
closing-wait implementation, which used a fixed 20 ms poll period and
drain delay.
This was likely a bit too conservative as a one-character timeout (e.g.
33 ms at 300 bps) should be enough to compensate for the lack of a
transmitter empty bit in the TUSB5052 line-status register.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Document that the device line-status register doesn't tell when the
transmitter shift register has emptied and that this is why the
one-character drain delay is needed.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The f81232 driver now waits for the transmit FIFO to drain during close
so there is no need to keep the time-based drain delay, which would add
up to two seconds on every close for low line speeds.
Fixes: 98405f8103 ("USB: serial: f81232: add tx_empty function")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
As a flush operation is implemented inside destroy_workqueue(), there is
no need to do flush operation before.
Fixes: bfcc681bd0 ("IB/hns: Fix the bug when free mr")
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Link: https://lore.kernel.org/r/1618305087-30799-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In case of error, the function devm_kasprintf() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409094901.1903622-1-weiyongjun1@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The only way to get out of io_iopoll_getevents() and continue iterating
is to have empty iopoll_list, otherwise the main loop would just exit.
So, instead of the unlock on 8th time heuristic, do that based on
iopoll_list.
Also, as no one can add new requests to iopoll_list while
io_iopoll_check() hold uring_lock, it's useless to spin with the list
empty, return in that case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5b8ebe84f5fff7ffa1f708952dfef7fc78b668e2.1618278933.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As CQE overflows are now untied from requests and so don't hold any
ref, we don't need to handle exiting/exec'ing cases there anymore.
Moreover, it's much nicer in regards to userspace to save overflowed
CQEs whenever possible, so remove failing on in_idle.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d873b7dab75c7f3039ead9628a745bea01f2cfd2.1618278933.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't save return values of hrtimer_try_to_cancel() in a variable, but
use right away. It's in general safer to not have an intermediate
variable, which may be reused and passed out wrongly, but it be
contracted out. Also clean io_timeout_extract().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d2566ef7ce632e6882dc13e022a26249b3fd30b5.1618278933.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io_sqe_files_unregister() faults on io_rsrc_ref_quiesce(), it will
fail to do unregister leaving files referenced. And that may well happen
because of a strayed signal or just because it does allocations inside.
In io_ring_ctx_free() do an unsafe version of unregister, as it's
guaranteed to not have requests by that point and so quiesce is useless.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e696e9eade571b51997d0dc1d01f144c6d685c05.1618278933.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sparse tool complains as follows:
drivers/hwtracing/coresight/coresight-core.c:26:1: warning:
symbol '__pcpu_scope_csdev_sink' was not declared. Should it be static?
As csdev_sink is not used outside of coresight-core.c after the
introduction of coresight_[set|get]_percpu_sink() helpers, this
change marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409094900.1902783-1-weiyongjun1@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Lightnvm was an innovative idea to expose more low-level control over SSDs.
But it failed to get properly standardized and remains a non-standarized
extension to NVMe that requires vendor specific quirks for a few now mostly
obsolete SSD devices. The standardized ZNS command set for NVMe has take
over a lot of the approaches and allows for fully standardized operation.
Remove the Linux code to support open channel SSDs as the few production
deployments of the above mentioned SSDs are using userspace driver stacks
instead of the fairly limited Linux support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Link: https://lore.kernel.org/r/20210413105257.159260-5-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'linux/blkdev.h' and 'uapi/linux/lightnvm.h' included in 'lightnvm.h'
is duplicated.It is also included in the 5th and 7th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Link: https://lore.kernel.org/r/20210413105257.159260-4-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When memdup_user returns an error, memdup_user has two different return
values, use PTR_ERR to get the correct return value.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Matias Bjørling <matias.bjorling@wdc.com>
Link: https://lore.kernel.org/r/20210413105257.159260-3-matias.bjorling@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally, If the smi-larb HW need work, we should enable the smi-common
HW power and clock firstly.
This patch adds device-link between the smi-larb dev and the smi-common
dev. then If pm_runtime_get_sync(smi-larb-dev), the pm_runtime_get_sync
(smi-common-dev) will be called automatically.
Also, Add DL_FLAG_STATELESS to avoid the smi-common clocks be gated when
probe.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210410091128.31823-5-yong.wu@mediatek.com
clk_set_parent() can fail and ignoring such case could lead to invalid
clock setup for given frequency.
Addresses-Coverity: Unchecked return value
Fixes: 6e7674c3c6 ("memory: Add DMC driver for Exynos5422")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210407154535.70756-1-krzysztof.kozlowski@canonical.com
The platform_get_resource_byname() can return NULL which would be
immediately dereferenced by resource_size(). Instead dereference it
after validating the resource.
Addresses-Coverity: Dereference null return value
Fixes: ca7d8b980b ("memory: add Renesas RPC-IF driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210407154357.70200-1-krzysztof.kozlowski@canonical.com
When mmaping an extra device region verify that the region index
derived from the mmap offset is valid.
Fixes: a15b1883fe ("vfio_pci: Allow mapping extra regions")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20210412214124.GA241759@lisa.in-ulm.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When reading the base address of the a REDIST region
through KVM_VGIC_V3_ADDR_TYPE_REDIST we expect the
redistributor region list to be populated with a single
element.
However list_first_entry() expects the list to be non empty.
Instead we should use list_first_entry_or_null which effectively
returns NULL if the list is empty.
Fixes: dbd9733ab6 ("KVM: arm/arm64: Replace the single rdist region by a list")
Cc: <Stable@vger.kernel.org> # v4.18+
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210412150034.29185-1-eric.auger@redhat.com
If we're trying to update the inode because a previous update left the
cache in a partially unrevalidated state, then allow the update if the
change attrs match.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the NFSv4.2 server supports the 'change_attr_type' attribute, then
allow the client to optimise its attribute cache update strategy.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The change_attr_type allows the server to provide a description of how
the change attribute will behave. This again will allow the client to
optimise its behaviour w.r.t. attribute revalidation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When the client is caching data and a write delegation is held, then the
server may send a CB_GETATTR to query the attributes. When this happens,
the client is supposed to bump the change attribute value that it
returns if it holds cached data.
However that process uses a value that is stored in the delegation. We
do not want to bump the change attribute held in the inode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We should not be invalidating the access or acl caches in
nfs_check_inode_attributes(), since the point is we're unsure about
whether the contents of the struct nfs_fattr are fully up to date.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Commit 0b467264d0 ("NFS: Fix attribute revalidation") changed the way
we populate the 'invalid' attribute, and made the line that strips away
the NFS_INO_INVALID_ATTR bits redundant.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If there is an outstanding layoutcommit, then the list of attributes
whose values are expected to change is not the full set. So let's
be explicit about the full list.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>