Commit graph

1,014,740 commits

Author SHA1 Message Date
Pali Rohár
d118ac2062 cpufreq: armada-37xx: Fix the AVS value for load L1
The original CPU voltage value for load L1 is too low for Armada 37xx SoC
when base CPU frequency is 1000 or 1200 MHz. It leads to instabilities
where CPU gets stuck soon after dynamic voltage scaling from load L1 to L0.

Update the CPU voltage value for load L1 accordingly when base frequency is
1000 or 1200 MHz. The minimal L1 value for base CPU frequency 1000 MHz is
updated from the original 1.05V to 1.108V and for 1200 MHz is updated to
1.155V. This minimal L1 value is used only in the case when it is lower
than value for L0.

This change fixes CPU instability issues on 1 GHz and 1.2 GHz variants of
Espressobin and 1 GHz Turris Mox.

Marvell previously for 1 GHz variant of Espressobin provided a patch [1]
suitable only for their Marvell Linux kernel 4.4 fork which workarounded
this issue. Patch forced CPU voltage value to 1.108V in all loads. But
such change does not fix CPU instability issues on 1.2 GHz variants of
Armada 3720 SoC.

During testing we come to the conclusion that using 1.108V as minimal
value for L1 load makes 1 GHz variants of Espressobin and Turris Mox boards
stable. And similarly 1.155V for 1.2 GHz variant of Espressobin.

These two values 1.108V and 1.155V are documented in Armada 3700 Hardware
Specifications as typical initial CPU voltage values.

Discussion about this issue is also at the Armbian forum [2].

[1] - dc33b62c90
[2] - https://forum.armbian.com/topic/10429-how-to-make-espressobin-v7-stable/

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 1c3528232f ("cpufreq: armada-37xx: Add AVS support")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-04-09 15:17:32 +05:30
Marek Behún
4e435a9dd2 clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
Remove the .set_parent method in clk_pm_cpu_ops.

This method was supposed to be needed by the armada-37xx-cpufreq driver,
but was never actually called due to wrong assumptions in the cpufreq
driver. After this was fixed in the cpufreq driver, this method is not
needed anymore.

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 2089dc33ea ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-04-09 15:17:32 +05:30
Marek Behún
22592df194 cpufreq: armada-37xx: Fix setting TBG parent for load levels
With CPU frequency determining software [1] we have discovered that
after this driver does one CPU frequency change, the base frequency of
the CPU is set to the frequency of TBG-A-P clock, instead of the TBG
that is parent to the CPU.

This can be reproduced on EspressoBIN and Turris MOX:
  cd /sys/devices/system/cpu/cpufreq/policy0
  echo powersave >scaling_governor
  echo performance >scaling_governor

Running the mhz tool before this driver is loaded reports 1000 MHz, and
after loading the driver and executing commands above the tool reports
800 MHz.

The change of TBG clock selector is supposed to happen in function
armada37xx_cpufreq_dvfs_setup. Before the function returns, it does
this:
  parent = clk_get_parent(clk);
  clk_set_parent(clk, parent);

The armada-37xx-periph clock driver has the .set_parent method
implemented correctly for this, so if the method was actually called,
this would work. But since the introduction of the common clock
framework in commit b2476490ef ("clk: introduce the common clock..."),
the clk_set_parent function checks whether the parent is actually
changing, and if the requested new parent is same as the old parent
(which is obviously the case for the code above), the .set_parent method
is not called at all.

This patch fixes this issue by filling the correct TBG clock selector
directly in the armada37xx_cpufreq_dvfs_setup during the filling of
other registers at the same address. But the determination of CPU TBG
index cannot be done via the common clock framework, therefore we need
to access the North Bridge Peripheral Clock registers directly in this
driver.

[1] https://github.com/wtarreau/mhz

Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 92ce45fb87 ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-04-09 15:17:32 +05:30
Thomas Bogendoerfer
e86e755966 MIPS: octeon: Add __raw_copy_[from|to|in]_user symbols
Cavium Octeon has its own memcpy implementation and also need the change
done in commit 04324f44cb ("MIPS: Remove get_fs/set_fs").

Fixes: 04324f44cb ("MIPS: Remove get_fs/set_fs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-04-09 11:43:52 +02:00
Mika Westerberg
6f3badead6 thunderbolt: Hide authorized attribute if router does not support PCIe tunnels
With USB4 devices PCIe tunneling is optional so for device routers
without PCIe upstream adapter it does not make much sense to expose the
authorized attribute. For this reason hide it if PCIe tunneling is not
supported by the device router.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09 12:26:24 +03:00
Mika Westerberg
2f608ba196 thunderbolt: Add details to router uevent
Expose two environment variables for routers as part of the initial
uevent:

  USB4_VERSION=1.0
  USB4_TYPE=host|device|hub

Userspace can use this information to expose more details about each
connected device. Only USB4 devices have USB4_VERSION but all devices
have USB4_TYPE.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09 12:26:10 +03:00
Takashi Iwai
64f40f9be1 ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX
ToneLab EX guitar pedal device requires the same quirk like ToneLab ST
for supporting the MIDI.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212593
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407144549.1530-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-04-09 09:58:13 +02:00
Takashi Iwai
d763145312 ALSA: usb-audio: Skip probe of UA-101 devices
UA-101 device and co are supported by another driver, snd-ua101, but
the USB audio class driver (snd-usb-audio) catches all and this
resulted in the lack of functionality like missing MIDI devices.

This patch introduces a sort of deny-listing for those devices to just
return -ENODEV at probe in snd-usb-audio driver, so that it falls back
to the probe by snd-ua101.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212477
Link: https://lore.kernel.org/r/20210408075656.30184-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-04-09 09:57:30 +02:00
Takashi Iwai
473d5ae82d Merge branch 'for-linus' into for-next
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-04-09 09:57:03 +02:00
Lv Yunlong
f7cae626ca crypto: qat - Fix a double free in adf_create_ring
In adf_create_ring, if the callee adf_init_ring() failed, the callee will
free the ring->base_addr by dma_free_coherent() and return -EFAULT. Then
adf_create_ring will goto err and the ring->base_addr will be freed again
in adf_cleanup_ring().

My patch sets ring->base_addr to NULL after the first freed to avoid the
double free.

Fixes: a672a9dc87 ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:45:14 +10:00
Kai Ye
556b64b9f3 crypto: hisilicon/qm - delete redundant code
The "qdma" is a structure variable instead of actual data. This
structure doesn't need to be zerod, The memset is useless and redundant.
So delete it.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:45:13 +10:00
Kai Ye
ae6ce7b17e crypto: hisilicon/sec - fixup checking the 3DES weak key
skcipher: Add a verifying to check whether the triple DES key
is weak.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:45:13 +10:00
Colin Ian King
854b773719 crypto: sa2ul - Fix memory leak of rxd
There are two error return paths that are not freeing rxd and causing
memory leaks.  Fix these.

Addresses-Coverity: ("Resource leak")
Fixes: 00c9211f60 ("crypto: sa2ul - Fix DMA mapping API usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:45:13 +10:00
Colin Ian King
50274b01ac crypto: sun8i-ss - Fix memory leak of pad
It appears there are several failure return paths that don't seem
to be free'ing pad. Fix these.

Addresses-Coverity: ("Resource leak")
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:45:13 +10:00
Kai Ye
3d8c5f5a08 crypto: rockchip - delete unneeded variable initialization
Delete unneeded variable initialization

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:45:13 +10:00
Tang Yizhou
63655b62f5 crypto: ccp - Use DEFINE_SPINLOCK() for spinlock
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:41:06 +10:00
Ruiqi Gong
fd4317b7b2 crypto: hisilicon/hpre - fix a typo in hpre_crypto.c
Do a trivial typo fix.
s/discribed/described

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:41:06 +10:00
Jiapeng Chong
a52c7b16dd crypto: ccp - A value assigned to a variable is never used
Fix the following whitescan warning:

Assigning value "64" to "dst.address" here, but that stored value is
overwritten before it can be used.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:41:06 +10:00
Longfang Liu
da6503f52b crypto: hisilicon/sec - Fix a module parameter error
ctx_q_num is a module parameter set by the user to specify the
number of qp queues required to create a ctx.

When the number of qp queues allocated by PF or VF is less than
the ctx_q_num, an error will be reported when ctx is initialized
in kernel mode, which leads to the problem that the registered
algorithms cannot be used.

Therefore, when PF or VF is initialized, if the number of qp queues
is not enough to create a ctx, the kernel mode cannot be used,
and there is no need to register the kernel mode algorithms.

Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:41:06 +10:00
Corentin Labbe
ac1af1a788 crypto: allwinner - add missing CRYPTO_ prefix
Some CONFIG select miss CRYPTO_.

Reported-by: Chen-Yu Tsai <wens@csie.org>
Fixes: 56f6d5aee8 ("crypto: sun8i-ce - support hash algorithms")
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09 17:41:05 +10:00
Arnd Bergmann
be0f990acf ARM: dts: clps711x: fix missing interrupt parent
The kernelci.org bot reports a build time regression:

arch/arm/boot/dts/ep7209.dtsi:187.17-192.4: Warning (interrupts_property): /keypad: Missing interrupt-parent

There is only one interrupt controller in this SoC, so I assume this
is the parent.

Fixes: 2bd86203ac ("ARM: dts: clps711x: Add keypad node")
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09 09:35:08 +02:00
Arnd Bergmann
420c4c4619 ARM: dts: mvebu: fix SPI device node
dtc warns about a mismatched address:

arch/arm/boot/dts/armada-385-atl-x530.dts:171.14-199.4: Warning (spi_bus_reg): /soc/spi@10680/spi-flash@0: SPI bus unit address format error, expected "1"

I assume the "reg" property is correct here, so adjust the unit address
accordingly.

Fixes: c6dfc019c2 ("ARM: dts: mvebu: Add device tree for ATL-x530 Board")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernelci.org bot <bot@kernelci.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09 09:31:19 +02:00
Krzysztof Kozlowski
3684100805 clk: socfpga: fix iomem pointer cast on 64-bit
Pointers should be cast with uintptr_t instead of integer.  This fixes
warning when compile testing on ARM64:

  drivers/clk/socfpga/clk-gate.c: In function ‘socfpga_clk_recalc_rate’:
  drivers/clk/socfpga/clk-gate.c:102:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]

Fixes: b7cec13f08 ("clk: socfpga: Look for the GPIO_DB_CLK by its offset")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09 09:24:30 +02:00
Arnd Bergmann
39b95079f6 Nuvoton WPCM450 BMC SoC
This adds basic support for the Nuvoton WPCM450 BMC SoC. It's an older
 SoC but still commonly found on eBay, mostly in Supermicro X9 server
 boards.
 
 Third-party documentation is available at: https://github.com/neuschaefer/wpcm450/wiki
 
 The code has been contributed by Jonathan Neuschäfer who has also
 stepped forward to maintain the soc.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmBv9pIACgkQa3ZZB4FH
 cJ6BBg/6A9wja9TgAfvTgWLmIRFu93mYcaDc3EoMOoqivxRFptFWxIUaSrD8AeiG
 a2upDS3P0nvoBmhh9nTRdnahCOWYDPAjabkCVUUEwqwDVCuI6hBNMjCTsOoq2Mk+
 1x1cP+Pe7sgq7UCKUJEOgWWFRZPP5utpwMHcMBj0lwwVllT0c5V56tICyEqufIow
 JVDJPY5DYbuCoLZZ92eB+maWxet7AmVTUwH07ym60a4hG7qgd9N6oBxL+z/Ps8RK
 dNBGn4LO7yFccA0WRCP/aYWMAQ8SHmz5M8LVbi4oc52kq1Ab15v8jkJZrXoIE/kP
 7qv1gsdD6FfplcMrcpOrjkIP2RU6n4yajnz2tFNNsgL17crqoAdZLW8Lr0bOCJDq
 diTxVbW3sdRTLGLwRF5jLdm464iUnnVbuqaPGQOHnjh3j2pk6q/8FGSwlIa1ArwS
 jEkydAJXpBcs+3fOG+JNcOd6aaemmwWCcjRp4G7rYNvev1PaJO7pNcW+Y47Uiq9d
 uvfGnlGUBx/eRb9bFte2l/TFiSYJ3QVUQrn1mIRArCkJK2mzqHLglBH+RJhtK096
 N0kyxd6hMpcqBsRm2W6wSdCTbtRMY9QjePOE6zHpZlOIbekD/lMCNi2z2xmgRzkD
 l1CuqTRUCNNMbIR9Ugd7Nqf2aFQ7wE3ayMctv0pkRWkDlAaahLc=
 =xF/1
 -----END PGP SIGNATURE-----

Merge tag 'bmc-5.13-wpcm450' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/newsoc

Nuvoton WPCM450 BMC SoC

This adds basic support for the Nuvoton WPCM450 BMC SoC. It's an older
SoC but still commonly found on eBay, mostly in Supermicro X9 server
boards.

Third-party documentation is available at: https://github.com/neuschaefer/wpcm450/wiki

The code has been contributed by Jonathan Neuschäfer who has also
stepped forward to maintain the soc.

* tag 'bmc-5.13-wpcm450' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: config: Add WPCM to multi v5
  MAINTAINERS: Add entry for Nuvoton WPCM450
  ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450
  ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chip
  watchdog: npcm: Add support for WPCM450
  ARM: npcm: Introduce Nuvoton WPCM450 SoC
  dt-bindings: watchdog: npcm: Add nuvoton,wpcm450-wdt
  dt-bindings: arm: npcm: Add nuvoton,wpcm450 compatible string
  dt-bindings: vendor-prefixes: Add Supermicro
  ARM: dts: Add board-specific compatible string to npcm750-evb devicetree
  dt-bindings: arm: Convert nuvoton,npcm750 binding to YAML

Link: https://lore.kernel.org/r/CACPK8Xdj20TcJckH8fx757ACa4hT4j3bZEctT0Przjv8XJd7KA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09 09:02:55 +02:00
Arnd Bergmann
d60f314b93 ASPEED LPC updates for 5.13
These patches fix the ASPEED LPC bindings and LPC-related device drivers
 so in the future the KCS driver can properly use the hardware.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmBv7HAACgkQa3ZZB4FH
 cJ68Gg/+KQns6SXdsCxu1sXctZmaSzmOXgGNnwLqCDu6TRFjtsUQ2CaIOFOhuUjJ
 A75StHMPFqHmcciWBL5eYHH+1CwBqs3b6ZXRbXFvVq0PE709epGA1n0egzoXiVEF
 nNjUM/74JY/4r2iEZu2cFRaGJKYJYPzn8cfTMvxdDZhmflgWtXxV7MejBr0r+JpF
 3GevztzscuI8gmxH2VVs9BvvNZxp748oG3WNfHpyWUDG6kEK2/r4Y7BEmB+q6E0a
 CpbMINHOT6e/Mc55EpK3+eby+OGs9BN8yzJaU9oBSPxUirDRPVIeu1NShpjukQ7F
 wfO9OY7RR0mySmZp6u4Qj4FKnkUYoE0pzxslVoVAS68AiPy2Z6UB2nLpu+UlRQhf
 zlycloD5Tywn3hkA5uaT0FPu2zV/Kbla4MJaOT8BIGfTC+/X2andYIUQN9dbjRhC
 OyWpzYWRJar/nOLx6ergXtcPft2dn9g0KqPNRF4s414JFmrHLIjmdCXQiPePDFGQ
 pI+8bTv614wGPeTE1zAD7sMrFSv+FEU8a6ZdXwMUHKrV8E8jgKqT40+eyZ6SHGOZ
 u+ATncxGcOQTLk9/JiMFOLVlj0oUIGf4E6n+zldASwTPuFyzKlNFRSsmPxHkKF3/
 FwE/cSXCtU83Vrr3e3zhV39Pz7hkMPbeQpqLmFiMCMbs3N+Oq0o=
 =U2zj
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/drivers

ASPEED LPC updates for 5.13

These patches fix the ASPEED LPC bindings and LPC-related device drivers
so in the future the KCS driver can properly use the hardware.

* tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning

Link: https://lore.kernel.org/r/CACPK8Xcb12LsVr7CUaXXjQskKbVjb7x+jgueG1Hik-kBPWtDSg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09 09:00:59 +02:00
Arnd Bergmann
e3bbc53ac8 BMC device tree updates for 5.13
The ASPEED and Nuvoton pull request now comes as a combined BMC pull
 request.
 
  - New machines
 
   * ASRock E3C246D4I, an AST2500 BMC for an Xeon E-2100/E-2200 mini-ITX
     system
   * Quanta GBS, an NPCM730 BMC for an x86 server
 
  - Power10 BMC updates for Everest and Rainier
 
  - GPIO line names for Mihawk
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmBv7eEACgkQa3ZZB4FH
 cJ54xQ/8CdngV0E3yqrE26PjtNUkGBso1WGkA0UekM3TuehhGpI4gyeUqg/b3Y/c
 OBZ+AVvc56mKDfqlZh8ChHbHS7S4Zq3dXPNCrIF3wJyESJmfsvZ24XnAOYNq9dAc
 OVJtUNTgUGkDqHaUu5JOuxg0DGau/FuDf7ExRejTXqum0EpCuWfxdcuhEZE2liUF
 reZhMbnnkKMDJlEySdPx406MZrPmqnWQ7UP14mfDkaB2e3rwlDa+5r2+blqaZ3hx
 R0Uz41wT8iIewH9Y7wZiCZdO4VgzUjZ6bYam5gnaaN6kOx6fhFMigJ5xYSwHyTBe
 Djcb/yYCwSPZ6xmYswm56+7Me97ij3IXMlUcN75cRhgPih2ED+y0z58k4dcK1y0M
 KvPQzUmep5Uh8aM2Ypnip8H5bOn8JZHhGtCMrPLXgDua86Y34LVvlL1gJtk8QZY1
 kMWKVoJdjmDQwIXKFkF0LhAui79h+kJUc43ecCkxWWp0ucwaApAkyer0KfPTjqmy
 IvjDaJvW1+QY0tp0ccP+3wb02dgBHibADUwdFUnGIhTCDJLcXI9uvHsBCcZVP871
 Zqp0uQmY0aMhgJU+U5dWaxOvpVOHlUlEyaVUCvHLoCn9Mh/ZkN2WubDCA9a8T1wp
 jMVeN0T+g5Adb+9mivhv+ACIUp9UkHnx+SQn7wSQyWWnfKt9cX8=
 =bOLL
 -----END PGP SIGNATURE-----

Merge tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

BMC device tree updates for 5.13

The ASPEED and Nuvoton pull request now comes as a combined BMC pull
request.

 - New machines

  * ASRock E3C246D4I, an AST2500 BMC for an Xeon E-2100/E-2200 mini-ITX
    system
  * Quanta GBS, an NPCM730 BMC for an x86 server

 - Power10 BMC updates for Everest and Rainier

 - GPIO line names for Mihawk

* tag 'bmc-5.13-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (21 commits)
  ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree
  ARM: dts: aspeed: mihawk: Add GPIO line names
  ARM: dts: aspeed: Add Rainier 1S4U machine
  ARM: dts: aspeed: everest: Add size/address cells
  ARM: dts: aspeed: everest: Enable fan watchdog
  ARM: dts: aspeed: everest: Add RTC
  ARM: dts: aspeed: everest: GPIOs support
  ARM: dts: aspeed: everest: Add UCD90320 power sequencer
  ARM: dts: aspeed: everest: Add power supply i2c devices
  ARM: dts: aspeed: everest: Add pca9552 fan presence
  ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines
  ARM: dts: aspeed: everest: Add max31785 fan controller device
  ARM: dts: aspeed: everest: Add I2C components
  ARM: dts: aspeed: rainier 4U: Fix fan configuration
  ARM: dts: aspeed: rainier: Add missing fan nodes
  ARM: dts: aspeed: rainier: Enable fan watchdog
  ARM: dts: aspeed: rainier: Add presence GPIOs
  ARM: dts: aspeed: rainier: Add additional processor CFAMs
  ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans
  ARM: dts: aspeed: rainier: Add directly controlled LEDs
  ...

Link: https://lore.kernel.org/r/CACPK8Xe-KV5BeQwOH6NKC1++FCVqwwNCGBh7hEbBORfrmxfTtQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09 08:57:49 +02:00
Andrii Nakryiko
92d3bff28a Merge branch 'bpf/selftests: page size fixes'
Yauheni Kaliuta says:

====================

A set of fixes for selftests to make them working on systems with PAGE_SIZE > 4K
+ cleanup (version) and ringbuf_multi extention.
---
v3->v4:
- zero initialize BPF programs' static variables;
- add bpf_map__inner_map to libbpf.map in alphabetical order;
- add bpf_map__set_inner_map_fd test to ringbuf_multi;

v2->v3:
 - reorder: move version removing patch first to keep main patches in
   one group;
 - rename "selftests/bpf: pass page size from userspace in sockopt_sk"
   as suggested;
 - convert sockopt_sk test to use ASSERT macros;
 - set page size from userspace
 - split patches to pairs userspace/bpf. It's easier to check that
   every conversion works as expected;

v1->v2:

- add missed 'selftests/bpf: test_progs/sockopt_sk: Convert to use BPF skeleton'
====================

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta
cfc0889ceb selftests/bpf: ringbuf_multi: Test bpf_map__set_inner_map_fd
Test map__set_inner_map_fd() interaction with map-in-map
initialization. Use hashmap of maps just to make it different to
existing array of maps.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-9-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta
f3f4c23e12 selftests/bpf: ringbuf_multi: Use runtime page size
Set bpf table sizes dynamically according to the runtime page size
value.

Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-8-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Andrii Nakryiko
b3278099b2 libbpf: Add bpf_map__inner_map API
The API gives access to inner map for map in map types (array or
hash of map). It will be used to dynamically set max_entries in it.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-7-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta
23a6576606 selftests/bpf: ringbuf: Use runtime page size
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.

Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-6-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta
34090aaf25 selftests/bpf: mmap: Use runtime page size
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.

Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-5-yauheni.kaliuta@redhat.com
2021-04-08 23:54:48 -07:00
Yauheni Kaliuta
7a85e4dfa7 selftests/bpf: Pass page size from userspace in map_ptr
Use ASSERT to check result but keep CHECK where format was used to
report error.

Use bpf_map__set_max_entries() to set map size dynamically from
userspace according to page size.

Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-4-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Yauheni Kaliuta
361d32028c selftests/bpf: Pass page size from userspace in sockopt_sk
Since there is no convenient way for bpf program to get PAGE_SIZE
from inside of the kernel, pass the value from userspace.

Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-3-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Yauheni Kaliuta
cad99cce13 selftests/bpf: test_progs/sockopt_sk: Convert to use BPF skeleton
Switch the test to use BPF skeleton to save some boilerplate and
make it easy to access bpf program bss segment.

The latter will be used to pass PAGE_SIZE from userspace since there
is no convenient way for bpf program to get it from inside of the
kernel.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-2-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Yauheni Kaliuta
ff182bc572 selftests/bpf: test_progs/sockopt_sk: Remove version
As pointed by Andrii Nakryiko, _version is useless now, remove it.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-1-yauheni.kaliuta@redhat.com
2021-04-08 23:54:47 -07:00
Hector Martin
ea96292838 asm-generic/io.h: Unbork ioremap_np() declaration
It accidentally slipped into the #ifdef for ioremap_uc().

Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20210409052038.58925-1-marcan@marcan.st'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-09 08:48:27 +02:00
Joel Stanley
09e6d2b71a ARM: config: Add WPCM to multi v5
This is a newly added ARM926 platform that is not covered by any other
defconfigs.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210409054511.1534181-1-joel@jms.id.au
2021-04-09 15:18:40 +09:30
Dan Williams
2361db89aa libnvdimm: Notify disk drivers to revalidate region read-only
Previous kernels allowed the BLKROSET to override the disk's read-only
status. With that situation fixed the pmem driver needs to rely on
notification events to reevaluate the disk read-only status after the
host region has been marked read-write.

Recall that when libnvdimm determines that the persistent memory has
lost persistence (for example lack of energy to flush from DRAM to FLASH
on an NVDIMM-N device) it marks the region read-only, but that state can
be overridden by the user via:

   echo 0 > /sys/bus/nd/devices/regionX/read_only

...to date there is no notification that the region has restored
persistence, so the user override is the only recovery.

Fixes: 52f019d43c ("block: add a hard-readonly flag to struct gendisk")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/161534060720.528671.2341213328968989192.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-04-08 22:18:36 -07:00
Jonathan Neuschäfer
ef9c51b45c MAINTAINERS: Add entry for Nuvoton WPCM450
I am adding myself as the maintainer of WPCM450-related code.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-11-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:27 +09:30
Jonathan Neuschäfer
37e9f9fa71 ARM: dts: Add devicetree for Supermicro X9SCi-LN4F based on WPCM450
The Supermicro X9SCi-LN4F is a server mainboard featuring the WPCM450
BMC. This patch adds a minimal devicetree for Linux running on the BMC.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-10-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:26 +09:30
Jonathan Neuschäfer
ed09d269b9 ARM: dts: Add devicetree for Nuvoton WPCM450 BMC chip
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally
marketed as Winbond WPCM450.

This patch adds a devicetree with basic functionality.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-9-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:25 +09:30
Jonathan Neuschäfer
328d1c1a92 watchdog: npcm: Add support for WPCM450
Add a compatible string for WPCM450, which has essentially the same
watchdog mechanism as NPCM750.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-8-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:24 +09:30
Jonathan Neuschäfer
ece3fe93e8 ARM: npcm: Introduce Nuvoton WPCM450 SoC
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally
marketed as Winbond WPCM450.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-6-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:22 +09:30
Jonathan Neuschäfer
9b39efacd6 dt-bindings: watchdog: npcm: Add nuvoton,wpcm450-wdt
Add a compatible string for the WPCM450 SoC, which has the same watchdog
timer.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-5-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:21 +09:30
Jonathan Neuschäfer
f31fc98b63 dt-bindings: arm: npcm: Add nuvoton,wpcm450 compatible string
The WPCM450 is an older BMC SoC in the Nuvoton NPCM family, originally
marketed as Winbond WPCM450.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-3-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:17 +09:30
Jonathan Neuschäfer
9f6f071692 dt-bindings: vendor-prefixes: Add Supermicro
Super Micro Computer, Inc. (https://www.supermicro.com/en/), commonly
known as Supermicro, is a manufacturer of server hardware.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210406120921.2484986-2-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 14:11:16 +09:30
Manivannan Sadhasivam
683e77cadc bus: mhi: core: Fix shadow declarations
This commit fixes below sparse warnings with W=2 about shadow
declarations:

drivers/bus/mhi/core/main.c: In function ‘parse_xfer_event’:
drivers/bus/mhi/core/main.c:667:17: warning: declaration of ‘flags’ shadows a previous local [-Wshadow]
  667 |   unsigned long flags;
      |                 ^~~~~
drivers/bus/mhi/core/main.c:565:16: note: shadowed declaration is here
  565 |  unsigned long flags = 0;
      |                ^~~~~
drivers/bus/mhi/core/main.c: In function ‘mhi_process_ctrl_ev_ring’:
drivers/bus/mhi/core/main.c:856:23: warning: declaration of ‘new_state’ shadows a previous local [-Wshadow]
  856 |     enum mhi_pm_state new_state;
      |                       ^~~~~~~~~
drivers/bus/mhi/core/main.c:837:19: note: shadowed declaration is here
  837 |    enum mhi_state new_state;
      |                   ^~~~~~~~~

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-09 10:11:05 +05:30
Chia-Wei, Wang
489774ff5d soc: aspeed: Adapt to new LPC device tree layout
Add check against LPC device v2 compatible string to
ensure that the fixed device tree layout is adopted.
The LPC register offsets are also fixed accordingly.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210319062752.145730-5-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 13:39:22 +09:30
Chia-Wei, Wang
eaffd32bea pinctrl: aspeed-g5: Adapt to new LPC device tree layout
Add check against LPC device v2 compatible string to
ensure that the fixed device tree layout is adopted.
The LPC register offsets are also fixed accordingly.

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210319062752.145730-4-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-09 13:39:21 +09:30