This currently supports:
* SMP (via spin-tables)
* AIC IRQs
* Serial (with earlycon)
* Framebuffer
A number of properties are dynamic, and based on system firmware
decisions that vary from version to version. These are expected
to be filled in by the loader.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Apple SoCs run firmware that sets up a simplefb-compatible framebuffer
for us. Add a compatible for it, and two missing supported formats.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds a Kconfig option to toggle support for Apple ARM SoCs.
At this time this targets the M1 and later "Apple Silicon" Mac SoCs.
Signed-off-by: Hector Martin <marcan@marcan.st>
This is the root interrupt controller used on Apple ARM SoCs such as the
M1. This irqchip driver performs multiple functions:
* Handles both IRQs and FIQs
* Drives the AIC peripheral itself (which handles IRQs)
* Dispatches FIQs to downstream hard-wired clients (currently the ARM
timer).
* Implements a virtual IPI multiplexer to funnel multiple Linux IPIs
into a single hardware IPI
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
AIC is the Apple Interrupt Controller found on Apple ARM SoCs, such as
the M1.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
These definitions are in arm-gic-v3.h for historical reasons which no
longer apply. Move them to sysreg.h so the AIC driver can use them, as
it needs to peek into vGIC registers to deal with the GIC maintentance
interrupt.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This implements the 'nonposted-mmio' boolean property. Placing this
property in a bus marks all direct child devices as requiring
non-posted MMIO mappings. If no such property is found, the default
is posted MMIO.
of_mmio_is_nonposted() performs this check to determine if a given
device has requested non-posted MMIO.
of_address_to_resource() uses this to set the IORESOURCE_MEM_NONPOSTED
flag on resources that require non-posted MMIO.
of_iomap() and of_io_request_and_map() then use this flag to pick the
correct ioremap() variant.
This mechanism is currently restricted to builds that support Apple ARM
platforms, as an optimization.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Now that we have ioremap_np(), we can make pci_remap_cfgspace() default
to it, falling back to ioremap() on platforms where it is not available.
Remove the arm64 implementation, since that is now redundant. Future
cleanups should be able to do the same for other arches, and eventually
make the generic pci_remap_cfgspace() unconditional.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is used on Apple ARM platforms, which require most MMIO
(except PCI devices) to be mapped as nGnRnE.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This documents the newly introduced ioremap_np() along with all the
other common ioremap() variants, and some higher-level abstractions
available.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds more detailed descriptions of the various read/write
primitives available for use with I/O memory/ports.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hector Martin <marcan@marcan.st>
ARM64 currently defaults to posted MMIO (nGnRE), but some devices
require the use of non-posted MMIO (nGnRnE). Introduce a new ioremap()
variant to handle this case. ioremap_np() returns NULL on arches that
do not implement this variant.
sparc64 is the only architecture that needs to be touched directly,
because it includes neither of the generic io.h or iomap.h headers.
This adds the IORESOURCE_MEM_NONPOSTED flag, which maps to this
variant and marks a given resource as requiring non-posted mappings.
This is implemented in the resource system because it is a SoC-level
requirement, so existing drivers do not need special-case code to pick
this ioremap variant.
Then this is implemented in devres by introducing devm_ioremap_np(),
and making devm_ioremap_resource() automatically select this variant
when the resource has the IORESOURCE_MEM_NONPOSTED flag set.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This allows the devicetree to correctly represent the available set of
timers, which varies from device to device, without the need for fake
dummy interrupts for unavailable slots.
Also add the hyp-virt timer/PPI, which is not currently used, but worth
representing.
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Not all platforms provide the same set of timers/interrupts, and Linux
only needs one (plus kvm/guest ones); some platforms are working around
this by using dummy fake interrupts. Implementing interrupt-names allows
the devicetree to specify an arbitrary set of available interrupts, so
the timer code can pick the right one.
This also adds the hyp-virt timer/interrupt, which was previously not
expressed in the fixed 4-interrupt form.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
The implementor will be used to condition the FIQ support quirk.
The specific CPU types are not used at the moment, but let's add them
for documentation purposes.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This introduces bindings for all three 2020 Apple M1 devices:
* apple,j274 - Mac mini (M1, 2020)
* apple,j293 - MacBook Pro (13-inch, M1, 2020)
* apple,j313 - MacBook Air (M1, 2020)
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This is different from the legacy AAPL prefix used on PPC, but
consensus is that we prefer `apple` for these new platforms.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
For unknown reason, old commit d27dfd388715 ("Import pre2.0.8")
changed 'ptrdiff_t' from 'int' to 'long'.
GCC expects it as 'int' really, and this leads to the following
warning when building KFENCE:
CC mm/kfence/report.o
In file included from ./include/linux/printk.h:7,
from ./include/linux/kernel.h:16,
from mm/kfence/report.c:10:
mm/kfence/report.c: In function 'kfence_report_error':
./include/linux/kern_levels.h:5:18: warning: format '%td' expects argument of type 'ptrdiff_t', but argument 6 has type 'long int' [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
./include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH'
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
| ^~~~~~~~
./include/linux/printk.h:343:9: note: in expansion of macro 'KERN_ERR'
343 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~
mm/kfence/report.c:213:3: note: in expansion of macro 'pr_err'
213 | pr_err("Out-of-bounds %s at 0x%p (%luB %s of kfence-#%td):\n",
| ^~~~~~
<asm-generic/uapi/posix-types.h> defines it as 'int', and
defines 'size_t' and 'ssize_t' exactly as powerpc do, so
remove the powerpc specific definitions and fallback on
generic ones.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e43d133bf52fa19e577f64f3a3a38cedc570377d.1617616601.git.christophe.leroy@csgroup.eu
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes: d6b9a81b2a ("powerpc: IOMMU fault injection")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617672785-81372-1-git-send-email-yang.lee@linux.alibaba.com
There is no need for this to be in asm, use the new intrrupt entry wrapper.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210406025508.821718-1-npiggin@gmail.com
The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.
Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.
[35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
at 10004a18 nip 10004a18 lr 100049f8 code 1 in
cpu_event_pinned_vs_ebb_test[10000000+10000]
Test results after the patch:
$ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
test: cpu_event_pinned_vs_ebb
tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
Binding to cpu 8
EBB Handler is at 0x100050c8
read error on event 0x7fffe6bd4040!
PM_RUN_INST_CMPL: result 9872 running/enabled 37930432
success: cpu_event_pinned_vs_ebb
This bug was hidden by other logic until commit 1908dc9117 (perf:
Tweak perf_event_attr::exclusive semantics).
Fixes: 4df4899911 ("powerpc/perf: Add power8 EBB support")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit 1908dc9117]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com
The suggested alternative for getting cache-inhibited memory with 'mem='
and /dev/mem is pretty hacky. Also, PAPR guests do not allow system
memory to be mapped cache-inhibited so despite /dev/mem being available
this will not work which can cause confusion. Instead recommend using
the memtrace buffers. memtrace is only available on powernv so there
will not be any chance of trying to do this in a guest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-2-jniethe5@gmail.com
Let the memory removed from the linear mapping to be used for the trace
buffers be mmaped. This is a useful way of providing cache-inhibited
memory for the alignment_handler selftest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: make memtrace_mmap() static as noticed by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-1-jniethe5@gmail.com
As best as I can tell the ".machine" directive in trampoline_64.S is no
longer, or never was, necessary.
It was added in commit 0d97631392 ("powerpc: Add purgatory for
kexec_file_load() implementation."), which created the file based on
the kexec-tools purgatory. It may be/have-been necessary in the
kexec-tools version, but we have a completely different build system,
and we already pass the desired CPU flags, eg:
gcc ... -m64 -Wl,-a64 -mabi=elfv2 -Wa,-maltivec -Wa,-mpower4 -Wa,-many
... arch/powerpc/purgatory/trampoline_64.S
So drop the ".machine" directive and rely on the assembler flags.
Reported-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20210315034159.315675-1-mpe@ellerman.id.au
When the original spectre/meltdown mitigations were merged we put them
in setup_64.c for lack of a better place.
Since then we created security.c for some of the other mitigation
related code. But it should all be in there.
This sort of code movement can cause trouble for backports, but
hopefully this code is relatively stable these days (famous last words).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326101201.1973552-1-mpe@ellerman.id.au
We have now fixed the known bugs in STRICT_KERNEL_RWX for Book3S
64-bit Hash and Radix MMUs, see preceding commits, so allow the
option to be selected again.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-6-mpe@ellerman.id.au
When we enabled STRICT_KERNEL_RWX we received some reports of boot
failures when using the Hash MMU and running under phyp. The crashes
are intermittent, and often exhibit as a completely unresponsive
system, or possibly an oops.
One example, which was caught in xmon:
[ 14.068327][ T1] devtmpfs: mounted
[ 14.069302][ T1] Freeing unused kernel memory: 5568K
[ 14.142060][ T347] BUG: Unable to handle kernel instruction fetch
[ 14.142063][ T1] Run /sbin/init as init process
[ 14.142074][ T347] Faulting instruction address: 0xc000000000004400
cpu 0x2: Vector: 400 (Instruction Access) at [c00000000c7475e0]
pc: c000000000004400: exc_virt_0x4400_instruction_access+0x0/0x80
lr: c0000000001862d4: update_rq_clock+0x44/0x110
sp: c00000000c747880
msr: 8000000040001031
current = 0xc00000000c60d380
paca = 0xc00000001ec9de80 irqmask: 0x03 irq_happened: 0x01
pid = 347, comm = kworker/2:1
...
enter ? for help
[c00000000c747880] c0000000001862d4 update_rq_clock+0x44/0x110 (unreliable)
[c00000000c7478f0] c000000000198794 update_blocked_averages+0xb4/0x6d0
[c00000000c7479f0] c000000000198e40 update_nohz_stats+0x90/0xd0
[c00000000c747a20] c0000000001a13b4 _nohz_idle_balance+0x164/0x390
[c00000000c747b10] c0000000001a1af8 newidle_balance+0x478/0x610
[c00000000c747be0] c0000000001a1d48 pick_next_task_fair+0x58/0x480
[c00000000c747c40] c000000000eaab5c __schedule+0x12c/0x950
[c00000000c747cd0] c000000000eab3e8 schedule+0x68/0x120
[c00000000c747d00] c00000000016b730 worker_thread+0x130/0x640
[c00000000c747da0] c000000000174d50 kthread+0x1a0/0x1b0
[c00000000c747e10] c00000000000e0f0 ret_from_kernel_thread+0x5c/0x6c
This shows that CPU 2, which was idle, woke up and then appears to
randomly take an instruction fault on a completely valid area of
kernel text.
The cause turns out to be the call to hash__mark_rodata_ro(), late in
boot. Due to the way we layout text and rodata, that function actually
changes the permissions for all of text and rodata to read-only plus
execute.
To do the permission change we use a hypervisor call, H_PROTECT. On
phyp that appears to be implemented by briefly removing the mapping of
the kernel text, before putting it back with the updated permissions.
If any other CPU is executing during that window, it will see spurious
faults on the kernel text and/or data, leading to crashes.
To fix it we use stop machine to collect all other CPUs, and then have
them drop into real mode (MMU off), while we change the mapping. That
way they are unaffected by the mapping temporarily disappearing.
We don't see this bug on KVM because KVM always use VPM=1, where
faults are directed to the hypervisor, and the fault will be
serialised vs the h_protect() by HPTE_V_HVLOCK.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-5-mpe@ellerman.id.au
Pull the loop calling hpte_updateboltedpp() out of
hash__change_memory_range() into a helper function. We need it to be a
separate function for the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-4-mpe@ellerman.id.au
In hash__mark_rodata_ro() we pass the raw PP_RXXX value to
hash__change_memory_range(). That has the effect of setting the key to
zero, because PP_RXXX contains no key value.
Fix it by using htab_convert_pte_flags(), which knows how to convert a
pgprot into a pp value, including the key.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210331003845.216246-3-mpe@ellerman.id.au
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit d94b827e89 ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
In the past we had a fallback definition for _PAGE_KERNEL_ROX, but we
removed that in commit d82fd29c5a ("powerpc/mm: Distribute platform
specific PAGE and PMD flags and definitions") and added definitions
for each MMU family.
However we missed adding a definition for 64s, which was not really a
bug because it's currently not used.
But we'd like to use PAGE_KERNEL_ROX in a future patch so add a
definition now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-1-mpe@ellerman.id.au
Previously when mapping kernel memory on radix, no ptesync was
included which would periodically lead to unhandled spurious faults.
Mapping kernel memory is used when code patching with Strict RWX
enabled. As suggested by Chris Riedl, turning ftrace on and off does a
large amount of code patching so is a convenient way to see this kind
of fault.
Add a selftest to try and trigger this kind of a spurious fault. It
tests for 30 seconds which is usually long enough for the issue to
show up.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Rename it to better reflect what it does, rather than the symptom]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-2-jniethe5@gmail.com
When adding a PTE a ptesync is needed to order the update of the PTE
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults
are not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the
vmalloc region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix.
In do_patch_instruction() the page frame that contains the instruction
to be patched is mapped and then immediately patched. With no ordering
or synchronization between setting up the PTE and writing to the page
it is possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
BUG: Unable to handle kernel data access on write at 0xc008000008f24a3c
Faulting instruction address: 0xc00000000008bd74
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: nop_module(PO+) [last unloaded: nop_module]
CPU: 4 PID: 757 Comm: sh Tainted: P O 5.10.0-rc5-01361-ge3c1b78c8440-dirty #43
NIP: c00000000008bd74 LR: c00000000008bd50 CTR: c000000000025810
REGS: c000000016f634a0 TRAP: 0300 Tainted: P O (5.10.0-rc5-01361-ge3c1b78c8440-dirty)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44002884 XER: 00000000
CFAR: c00000000007c68c DAR: c008000008f24a3c DSISR: 42000000 IRQMASK: 1
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) &
Turning ftrace on and off does a large amount of code patching which
in usually less then 5min will crash giving a trace like:
ftrace-powerpc: (____ptrval____): replaced (4b473b11) != old (60000000)
------------[ ftrace bug ]------------
ftrace failed to modify
[<c000000000bf8e5c>] napi_busy_loop+0xc/0x390
actual: 11:3b:47:4b
Setting ftrace call site to call ftrace function
ftrace record flags: 80000001
(1)
expected tramp: c00000000006c96c
------------[ cut here ]------------
WARNING: CPU: 4 PID: 809 at kernel/trace/ftrace.c:2065 ftrace_bug+0x28c/0x2e8
Modules linked in: nop_module(PO-) [last unloaded: nop_module]
CPU: 4 PID: 809 Comm: sh Tainted: P O 5.10.0-rc5-01360-gf878ccaf250a #1
NIP: c00000000024f334 LR: c00000000024f330 CTR: c0000000001a5af0
REGS: c000000004c8b760 TRAP: 0700 Tainted: P O (5.10.0-rc5-01360-gf878ccaf250a)
MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28008848 XER: 20040000
CFAR: c0000000001a9c98 IRQMASK: 0
GPR00: c00000000024f330 c000000004c8b9f0 c000000002770600 0000000000000022
GPR04: 00000000ffff7fff c000000004c8b6d0 0000000000000027 c0000007fe9bcdd8
GPR08: 0000000000000023 ffffffffffffffd8 0000000000000027 c000000002613118
GPR12: 0000000000008000 c0000007fffdca00 0000000000000000 0000000000000000
GPR16: 0000000023ec37c5 0000000000000000 0000000000000000 0000000000000008
GPR20: c000000004c8bc90 c0000000027a2d20 c000000004c8bcd0 c000000002612fe8
GPR24: 0000000000000038 0000000000000030 0000000000000028 0000000000000020
GPR28: c000000000ff1b68 c000000000bf8e5c c00000000312f700 c000000000fbb9b0
NIP ftrace_bug+0x28c/0x2e8
LR ftrace_bug+0x288/0x2e8
Call Trace:
ftrace_bug+0x288/0x2e8 (unreliable)
ftrace_modify_all_code+0x168/0x210
arch_ftrace_update_code+0x18/0x30
ftrace_run_update_code+0x44/0xc0
ftrace_startup+0xf8/0x1c0
register_ftrace_function+0x4c/0xc0
function_trace_init+0x80/0xb0
tracing_set_tracer+0x2a4/0x4f0
tracing_set_trace_write+0xd4/0x130
vfs_write+0xf0/0x330
ksys_write+0x84/0x140
system_call_exception+0x14c/0x230
system_call_common+0xf0/0x27c
To fix this when updating kernel memory PTEs using ptesync.
Fixes: f1cb8f9beb ("powerpc/64s/radix: avoid ptesync after set_pte and ptep_set_access_flags")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Tidy up change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-1-jniethe5@gmail.com
Various spelling/typo fixes.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Enhance enum nl80211_tdls_peer_capability to configure TDLS peer's
support for HE mode. Userspace decodes the TDLS setup response frame
and confugures the HE mode support to driver if the peer has advertized
HE mode support in TDLS setup response frame. The driver uses this
information to decide whether to include HE operation IE in TDLS setup
confirmation frame.
Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org>
Link: https://lore.kernel.org/r/1614696636-30144-1-git-send-email-vamsin@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rfkill now allows to report a reason for the hw_rfkill state.
Allow cfg80211 drivers to specify this reason.
Keep the current API to use the default reason
(RFKILL_HARD_BLOCK_SIGNAL).
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210322204633.102581-4-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The dp->train_set[] for this driver is only two characters, not four so
this memsets too much. Fortunately, this ends up corrupting a struct
hole and not anything important.
Fixes: d76271d226 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda
This driver is (for now) ARM specific, and currently doesn't
build with a variety of architectures (ia64, RISC-V, x86_64
at the very least).
Drop COMPILE_TEST from Kconfig until it gets sorted out.
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Some controllers don't support the Simple Pairing Options feature that
can indicate the support for P-192 and P-256 public key validation.
However they might support the Microsoft vendor extension that can
indicate the validiation capability as well.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The le_scan_{int,window}_adv_monitor settings have not been set with a
sensible default.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The DISCOV_LE_FAST_ADV_INT_{MIN,MAX} contants are in msec, but then used
later on directly while it is suppose to be N * 0.625 ms according to
the Bluetooth Core specification.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for Bluetooth HCI transport over virtio.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The FIQ support series, already merged into arm64, is a dependency
of the M1 bring-up series and was split off after the first few
versions.
Signed-off-by: Hector Martin <marcan@marcan.st>
If tbo.mem.bus.caching is cached, buffer is intended to be mapped
as cached from CPU. Map it with ioremap_cache.
This wasn't necessary before as device memory was never mapped
as cached from CPU side. It becomes necessary for aldebaran as
device memory is mapped cached from CPU.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Allocate a new private stub fence in drm_syncobj_assign_null_handle,
instead of using a static stub fence.
When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when
userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp
obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO
should match when the fence's status was changed from the perspective of
userspace, which is during the respective ioctl.
When a static stub fence started being used in by these ioctls, this
behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO
became the first time anything used the static stub fence, which has no
meaning to userspace.
Signed-off-by: David Stevens <stevensd@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>