Commit graph

1,014,740 commits

Author SHA1 Message Date
Takashi Sakamoto
1b6604896e ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26
Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.

This commit fixes hardcoded stream formats.

Cc: <stable@vger.kernel.org>
Fixes: 28b208f600 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-05-14 09:40:15 +02:00
Nicholas Piggin
c6ac667b07 powerpc/64e/interrupt: Fix nvgprs being clobbered
Some interrupt handlers have an "extra" that saves 1 or 2
registers (r14, r15) in the paca save area and makes them available to
use by the handler.

The change to always save nvgprs in exception handlers lead to some
interrupt handlers saving those scratch r14 / r15 registers into the
interrupt frame's GPR saves, which get restored on interrupt exit.

Fix this by always reloading those scratch registers from paca before
the EXCEPTION_COMMON that saves nvgprs.

Fixes: 4228b2c3d2 ("powerpc/64e/interrupt: always save nvgprs on interrupt")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514044008.1955783-1-npiggin@gmail.com
2021-05-14 17:28:54 +10:00
Nicholas Piggin
4ec5feec1a powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
scv support introduced the notion of code that implicitly soft-masks
irqs due to the instruction addresses. This is required because scv
enters the kernel with MSR[EE]=1.

If a NMI (including soft-NMI) interrupt hits when we are implicitly
soft-masked then its regs->softe does not reflect this because it is
derived from the explicit soft mask state (paca->irq_soft_mask). This
makes arch_irq_disabled_regs(regs) return false.

This can trigger a warning in the soft-NMI watchdog code (shown below).
Fix it by having NMI interrupts set regs->softe to disabled in case of
interrupting an implicit soft-masked region.

  ------------[ cut here ]------------
  WARNING: CPU: 41 PID: 1103 at arch/powerpc/kernel/watchdog.c:259 soft_nmi_interrupt+0x3e4/0x5f0
  CPU: 41 PID: 1103 Comm: (spawn) Not tainted
  NIP:  c000000000039534 LR: c000000000039234 CTR: c000000000009a00
  REGS: c000007fffbcf940 TRAP: 0700   Not tainted
  MSR:  9000000000021033 <SF,HV,ME,IR,DR,RI,LE>  CR: 22042482  XER: 200400ad
  CFAR: c000000000039260 IRQMASK: 3
  GPR00: c000000000039204 c000007fffbcfbe0 c000000001d6c300 0000000000000003
  GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020
  GPR08: 0000007ffd4e0000 0000000000000000 c000007ffffceb00 7265677368657265
  GPR12: 9000000000009033 c000007ffffceb00 00000f7075bf4480 000000000000002a
  GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000
  GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040
  GPR24: 0000000000000000 0000000000000029 c000000001dae058 0000000000000029
  GPR28: 0000000000000000 0000000000000800 0000000000000009 c000007fffbcfd60
  NIP [c000000000039534] soft_nmi_interrupt+0x3e4/0x5f0
  LR [c000000000039234] soft_nmi_interrupt+0xe4/0x5f0
  Call Trace:
  [c000007fffbcfbe0] [c000000000039204] soft_nmi_interrupt+0xb4/0x5f0 (unreliable)
  [c000007fffbcfcf0] [c00000000000c0e8] soft_nmi_common+0x138/0x1c4
  --- interrupt: 900 at end_real_trampolines+0x0/0x1000
  NIP:  c000000000003000 LR: 00007ca426adb03c CTR: 900000000280f033
  REGS: c000007fffbcfd60 TRAP: 0900
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 44042482  XER: 200400ad
  CFAR: 00007ca426946020 IRQMASK: 0
  GPR00: 00000000000000ad 00007ffffa45d050 00007ca426b07f00 0000000000000035
  GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020
  GPR08: 0000000000000000 0000000000100000 0000000010000000 00007ffffa45d110
  GPR12: 0000000000000001 00007ca426d4e680 00000f7075bf4480 000000000000002a
  GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000
  GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040
  GPR24: 0000000000000000 00000f7057473f68 0000000000000003 000000000000041b
  GPR28: 00007ffffa45d4c4 0000000000000035 0000000000000000 00000f7057473f68
  NIP [c000000000003000] end_real_trampolines+0x0/0x1000
  LR [00007ca426adb03c] 0x7ca426adb03c
  --- interrupt: 900
  Instruction dump:
  60000000 60000000 60420000 38600001 482b3ae5 60000000 e93f0138 a36d0008
  7daa6b78 71290001 7f7907b4 4082fd34 <0fe00000> 4bfffd2c 60420000 ea6100a8
  ---[ end trace dc75f67d819779da ]---

Fixes: 118178e62e ("powerpc: move NMI entry/exit code into wrapper")
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210503111708.758261-1-npiggin@gmail.com
2021-05-14 17:28:52 +10:00
Michael Ellerman
5b48ba2fbd powerpc/64s: Fix stf mitigation patching w/strict RWX & hash
The stf entry barrier fallback is unsafe to execute in a semi-patched
state, which can happen when enabling/disabling the mitigation with
strict kernel RWX enabled and using the hash MMU.

See the previous commit for more details.

Fix it by changing the order in which we patch the instructions.

Note the stf barrier fallback is only used on Power6 or earlier.

Fixes: bd573a8131 ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513140800.1391706-2-mpe@ellerman.id.au
2021-05-14 17:27:37 +10:00
Michael Ellerman
49b39ec248 powerpc/64s: Fix entry flush patching w/strict RWX & hash
The entry flush mitigation can be enabled/disabled at runtime. When this
happens it results in the kernel patching its own instructions to
enable/disable the mitigation sequence.

With strict kernel RWX enabled instruction patching happens via a
secondary mapping of the kernel text, so that we don't have to make the
primary mapping writable. With the hash MMU this leads to a hash fault,
which causes us to execute the exception entry which contains the entry
flush mitigation.

This means we end up executing the entry flush in a semi-patched state,
ie. after we have patched the first instruction but before we patch the
second or third instruction of the sequence.

On machines with updated firmware the entry flush is a series of special
nops, and it's safe to to execute in a semi-patched state.

However when using the fallback flush the sequence is mflr/branch/mtlr,
and so it's not safe to execute if we have patched out the mflr but not
the other two instructions. Doing so leads to us corrputing LR, leading
to an oops, for example:

  # echo 0 > /sys/kernel/debug/powerpc/entry_flush
  kernel tried to execute exec-protected page (c000000002971000) - exploit attempt? (uid: 0)
  BUG: Unable to handle kernel instruction fetch
  Faulting instruction address: 0xc000000002971000
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  CPU: 0 PID: 2215 Comm: bash Not tainted 5.13.0-rc1-00010-gda3bb206c9ce #1
  NIP:  c000000002971000 LR: c000000002971000 CTR: c000000000120c40
  REGS: c000000013243840 TRAP: 0400   Not tainted  (5.13.0-rc1-00010-gda3bb206c9ce)
  MSR:  8000000010009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 48428482  XER: 00000000
  ...
  NIP  0xc000000002971000
  LR   0xc000000002971000
  Call Trace:
    do_patch_instruction+0xc4/0x340 (unreliable)
    do_entry_flush_fixups+0x100/0x3b0
    entry_flush_set+0x50/0xe0
    simple_attr_write+0x160/0x1a0
    full_proxy_write+0x8c/0x110
    vfs_write+0xf0/0x340
    ksys_write+0x84/0x140
    system_call_exception+0x164/0x2d0
    system_call_common+0xec/0x278

The simplest fix is to change the order in which we patch the
instructions, so that the sequence is always safe to execute. For the
non-fallback flushes it doesn't matter what order we patch in.

Fixes: bd573a8131 ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513140800.1391706-1-mpe@ellerman.id.au
2021-05-14 17:27:36 +10:00
Michael Ellerman
aec86b052d powerpc/64s: Fix crashes when toggling entry flush barrier
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.

However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:

  sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20

Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).

Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.

Fixes: f79643787e ("powerpc/64s: flush L1D on kernel entry")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210506044959.1298123-2-mpe@ellerman.id.au
2021-05-14 17:27:36 +10:00
Michael Ellerman
8ec7791bae powerpc/64s: Fix crashes when toggling stf barrier
The STF (store-to-load forwarding) barrier mitigation can be
enabled/disabled at runtime via a debugfs file (stf_barrier), which
causes the kernel to patch itself to enable/disable the relevant
mitigations.

However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:

  User access of kernel address (c00000003fff5af0) - exploit attempt? (uid: 0)
  segfault (11) at c00000003fff5af0 nip 7fff8ad12198 lr 7fff8ad121f8 code 1
  code: 40820128 e93c00d0 e9290058 7c292840 40810058 38600000 4bfd9a81 e8410018
  code: 2c030006 41810154 3860ffb6 e9210098 <e94d8ff0> 7d295279 39400000 40820a3c

Shows that we returned to userspace without restoring the user r13
value, due to executing the partially patched STF exit code.

Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.

Fixes: a048a07d7f ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210506044959.1298123-1-mpe@ellerman.id.au
2021-05-14 17:27:36 +10:00
Andrii Nakryiko
c1cccec9c6 libbpf: Reject static maps
Static maps never really worked with libbpf, because all such maps were always
silently resolved to the very first map. Detect static maps (both legacy and
BTF-defined) and report user-friendly error.

Tested locally by switching few maps (legacy and BTF-defined) in selftests to
static ones and verifying that now libbpf rejects them loudly.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210513233643.194711-2-andrii@kernel.org
2021-05-13 17:23:58 -07:00
Andrii Nakryiko
9e9b451593 selftests/bpf: Validate skeleton gen handles skipped fields
Adjust static_linked selftests to test a mix of global and static variables
and their handling of bpftool's skeleton generation code.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210513233643.194711-1-andrii@kernel.org
2021-05-13 17:23:57 -07:00
Stefano Brivio
f0b3d33806 netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version
Arturo reported this backtrace:

[709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0
[709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod
[709732.358941]  pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common
[709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1
[709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020
[709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0
[709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb
[709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202
[709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001
[709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003
[709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462
[709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960
[709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660
[709732.358990] FS:  0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000
[709732.358993] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0
[709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[709732.359003] PKRU: 55555554
[709732.359005] Call Trace:
[709732.359009]  <IRQ>
[709732.359035]  nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables]
[709732.359046]  ? sched_clock+0x5/0x10
[709732.359054]  ? sched_clock_cpu+0xc/0xb0
[709732.359061]  ? record_times+0x16/0x80
[709732.359068]  ? plist_add+0xc1/0x100
[709732.359073]  ? psi_group_change+0x47/0x230
[709732.359079]  ? skb_clone+0x4d/0xb0
[709732.359085]  ? enqueue_task_rt+0x22b/0x310
[709732.359098]  ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en]
[709732.359102]  ? packet_rcv+0x40/0x4a0
[709732.359121]  nft_lookup_eval+0x59/0x160 [nf_tables]
[709732.359133]  nft_do_chain+0x350/0x500 [nf_tables]
[709732.359152]  ? nft_lookup_eval+0x59/0x160 [nf_tables]
[709732.359163]  ? nft_do_chain+0x364/0x500 [nf_tables]
[709732.359172]  ? fib4_rule_action+0x6d/0x80
[709732.359178]  ? fib_rules_lookup+0x107/0x250
[709732.359184]  nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat]
[709732.359193]  nf_nat_inet_fn+0xea/0x210 [nf_nat]
[709732.359202]  nf_nat_ipv4_out+0x14/0xa0 [nf_nat]
[709732.359207]  nf_hook_slow+0x44/0xc0
[709732.359214]  ip_output+0xd2/0x100
[709732.359221]  ? __ip_finish_output+0x210/0x210
[709732.359226]  ip_forward+0x37d/0x4a0
[709732.359232]  ? ip4_key_hashfn+0xb0/0xb0
[709732.359238]  ip_sublist_rcv_finish+0x4f/0x60
[709732.359243]  ip_sublist_rcv+0x196/0x220
[709732.359250]  ? ip_rcv_finish_core.isra.22+0x400/0x400
[709732.359255]  ip_list_rcv+0x137/0x160
[709732.359264]  __netif_receive_skb_list_core+0x29b/0x2c0
[709732.359272]  netif_receive_skb_list_internal+0x1a6/0x2d0
[709732.359280]  gro_normal_list.part.156+0x19/0x40
[709732.359286]  napi_complete_done+0x67/0x170
[709732.359298]  bnxt_poll+0x105/0x190 [bnxt_en]
[709732.359304]  ? irqentry_exit+0x29/0x30
[709732.359309]  ? asm_common_interrupt+0x1e/0x40
[709732.359315]  net_rx_action+0x144/0x3c0
[709732.359322]  __do_softirq+0xd5/0x29c
[709732.359329]  asm_call_irq_on_stack+0xf/0x20
[709732.359332]  </IRQ>
[709732.359339]  do_softirq_own_stack+0x37/0x40
[709732.359346]  irq_exit_rcu+0x9d/0xa0
[709732.359353]  common_interrupt+0x78/0x130
[709732.359358]  asm_common_interrupt+0x1e/0x40
[709732.359366] RIP: 0010:crc_41+0x0/0x1e [crc32c_intel]
[709732.359370] Code: ff ff f2 4d 0f 38 f1 93 a8 fe ff ff f2 4c 0f 38 f1 81 b0 fe ff ff f2 4c 0f 38 f1 8a b0 fe ff ff f2 4d 0f 38 f1 93 b0 fe ff ff <f2> 4c 0f 38 f1 81 b8 fe ff ff f2 4c 0f 38 f1 8a b8 fe ff ff f2 4d
[709732.359373] RSP: 0018:ffffbb97008dfcd0 EFLAGS: 00000246
[709732.359377] RAX: 000000000000002a RBX: 0000000000000400 RCX: ffff922fc591dd50
[709732.359379] RDX: ffff922fc591dea0 RSI: 0000000000000a14 RDI: ffffffffc00dddc0
[709732.359382] RBP: 0000000000001000 R08: 000000000342d8c3 R09: 0000000000000000
[709732.359384] R10: 0000000000000000 R11: ffff922fc591dff0 R12: ffffbb97008dfe58
[709732.359386] R13: 000000000000000a R14: ffff922fd2b91e80 R15: ffff922fef83fe38
[709732.359395]  ? crc_43+0x1e/0x1e [crc32c_intel]
[709732.359403]  ? crc32c_pcl_intel_update+0x97/0xb0 [crc32c_intel]
[709732.359419]  ? jbd2_journal_commit_transaction+0xaec/0x1a30 [jbd2]
[709732.359425]  ? irq_exit_rcu+0x3e/0xa0
[709732.359447]  ? kjournald2+0xbd/0x270 [jbd2]
[709732.359454]  ? finish_wait+0x80/0x80
[709732.359470]  ? commit_timeout+0x10/0x10 [jbd2]
[709732.359476]  ? kthread+0x116/0x130
[709732.359481]  ? kthread_park+0x80/0x80
[709732.359488]  ? ret_from_fork+0x1f/0x30
[709732.359494] ---[ end trace 081a19978e5f09f5 ]---

that is, nft_pipapo_avx2_lookup() uses the FPU running from a softirq
that interrupted a kthread, also using the FPU.

That's exactly the reason why irq_fpu_usable() is there: use it, and
if we can't use the FPU, fall back to the non-AVX2 version of the
lookup operation, i.e. nft_pipapo_lookup().

Reported-by: Arturo Borrero Gonzalez <arturo@netfilter.org>
Cc: <stable@vger.kernel.org> # 5.6.x
Fixes: 7400b06396 ("nft_set_pipapo: Introduce AVX2-based lookup implementation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-05-14 01:42:52 +02:00
Roi Dayan
c07531c01d netfilter: flowtable: Remove redundant hw refresh bit
Offloading conns could fail for multiple reasons and a hw refresh bit is
set to try to reoffload it in next sw packet.
But it could be in some cases and future points that the hw refresh bit
is not set but a refresh could succeed.
Remove the hw refresh bit and do offload refresh if requested.
There won't be a new work entry if a work is already pending
anyway as there is the hw pending bit.

Fixes: 8b3646d6e0 ("net/sched: act_ct: Support refreshing the flow table entries")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-05-14 01:34:26 +02:00
Filipe Manana
54a40fc3a1 btrfs: fix removed dentries still existing after log is synced
When we move one inode from one directory to another and both the inode
and its previous parent directory were logged before, we are not supposed
to have the dentry for the old parent if we have a power failure after the
log is synced. Only the new dentry is supposed to exist.

Generally this works correctly, however there is a scenario where this is
not currently working, because the old parent of the file/directory that
was moved is not authoritative for a range that includes the dir index and
dir item keys of the old dentry. This case is better explained with the
following example and reproducer:

  # The test requires a very specific layout of keys and items in the
  # fs/subvolume btree to trigger the bug. So we want to make sure that
  # on whatever platform we are, we have the same leaf/node size.
  #
  # Currently in btrfs the node/leaf size can not be smaller than the page
  # size (but it can be greater than the page size). So use the largest
  # supported node/leaf size (64K).

  $ mkfs.btrfs -f -n 65536 /dev/sdc
  $ mount /dev/sdc /mnt

  # "testdir" is inode 257.
  $ mkdir /mnt/testdir
  $ chmod 755 /mnt/testdir

  # Create several empty files to have the directory "testdir" with its
  # items spread over several leaves (7 in this case).
  $ for ((i = 1; i <= 1200; i++)); do
       echo -n > /mnt/testdir/file$i
    done

  # Create our test directory "dira", inode number 1458, which gets all
  # its items in leaf 7.
  #
  # The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to
  # the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY
  # item that points to that entry is in leaf 3.
  #
  # For this particular filesystem node size (64K), file count and file
  # names, we endup with the directory entry items from inode 257 in
  # leaves 2 and 3, as previously mentioned - what matters for triggering
  # the bug exercised by this test case is that those items are not placed
  # in leaf 1, they must be placed in a leaf different from the one
  # containing the inode item for inode 257.
  #
  # The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for
  # the parent inode (257) are the following:
  #
  #    item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34
  #         location key (1458 INODE_ITEM 0) type DIR
  #         transid 6 data_len 0 name_len 4
  #         name: dira
  #
  # and:
  #
  #    item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34
  #         location key (1458 INODE_ITEM 0) type DIR
  #         transid 6 data_len 0 name_len 4
  #         name: dira

  $ mkdir /mnt/testdir/dira

  # Make sure everything done so far is durably persisted.
  $ sync

  # Now do a change to inode 257 ("testdir") that does not result in
  # COWing leaves 2 and 3 - the leaves that contain the directory items
  # pointing to inode 1458 (directory "dira").
  #
  # Changing permissions, the owner/group, updating or adding a xattr,
  # etc, will not change (COW) leaves 2 and 3. So for the sake of
  # simplicity change the permissions of inode 257, which results in
  # updating its inode item and therefore change (COW) only leaf 1.

  $ chmod 700 /mnt/testdir

  # Now fsync directory inode 257.
  #
  # Since only the first leaf was changed/COWed, we log the inode item of
  # inode 257 and only the dentries found in the first leaf, all have a
  # key type of BTRFS_DIR_ITEM_KEY, and no keys of type
  # BTRFS_DIR_INDEX_KEY, because they sort after the former type and none
  # exist in the first leaf.
  #
  # We also log 3 items that represent ranges for dir items and dir
  # indexes for which the log is authoritative:
  #
  # 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
  #    authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
  #    in the range [0, 2285968570] (the offset here is the crc32c of the
  #    dentry's name). The value 2285968570 corresponds to the offset of
  #    the first key of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY);
  #
  # 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
  #    authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
  #    in the range [4293818216, (u64)-1] (the offset here is the crc32c
  #    of the dentry's name). The value 4293818216 corresponds to the
  #    offset of the highest key of type BTRFS_DIR_ITEM_KEY plus 1
  #    (4293818215 + 1), which is located in leaf 2;
  #
  # 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203,
  #    which indicates the log is authoritative for all keys of type
  #    BTRFS_DIR_INDEX_KEY that have an offset in the range
  #    [1203, (u64)-1]. The value 1203 corresponds to the offset of the
  #    last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1), which is
  #    located in leaf 3;
  #
  # Also, because "testdir" is a directory and inode 1458 ("dira") is a
  # child directory, we log inode 1458 too.

  $ xfs_io -c "fsync" /mnt/testdir

  # Now move "dira", inode 1458, to be a child of the root directory
  # (inode 256).
  #
  # Because this inode was previously logged, when "testdir" was fsynced,
  # the log is updated so that the old inode reference, referring to inode
  # 257 as the parent, is deleted and the new inode reference, referring
  # to inode 256 as the parent, is added to the log.

  $ mv /mnt/testdir/dira /mnt

  # Now change some file and fsync it. This guarantees the log changes
  # made by the previous move/rename operation are persisted. We do not
  # need to do any special modification to the file, just any change to
  # any file and sync the log.

  $ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/testdir/file1

  # Simulate a power failure and then mount again the filesystem to
  # replay the log tree. We want to verify that we are able to mount the
  # filesystem, meaning log replay was successful, and that directory
  # inode 1458 ("dira") only has inode 256 (the filesystem's root) as
  # its parent (and no longer a child of inode 257).
  #
  # It used to happen that during log replay we would end up having
  # inode 1458 (directory "dira") with 2 hard links, being a child of
  # inode 257 ("testdir") and inode 256 (the filesystem's root). This
  # resulted in the tree checker detecting the issue and causing the
  # mount operation to fail (with -EIO).
  #
  # This happened because in the log we have the new name/parent for
  # inode 1458, which results in adding the new dentry with inode 256
  # as the parent, but the previous dentry, under inode 257 was never
  # removed - this is because the ranges for dir items and dir indexes
  # of inode 257 for which the log is authoritative do not include the
  # old dir item and dir index for the dentry of inode 257 referring to
  # inode 1458:
  #
  # - for dir items, the log is authoritative for the ranges
  #   [0, 2285968570] and [4293818216, (u64)-1]. The dir item at inode 257
  #   pointing to inode 1458 has a key of (257 DIR_ITEM 3724298081), as
  #   previously mentioned, so the dir item is not deleted when the log
  #   replay procedure processes the authoritative ranges, as 3724298081
  #   is outside both ranges;
  #
  # - for dir indexes, the log is authoritative for the range
  #   [1203, (u64)-1], and the dir index item of inode 257 pointing to
  #   inode 1458 has a key of (257 DIR_INDEX 1202), as previously
  #   mentioned, so the dir index item is not deleted when the log
  #   replay procedure processes the authoritative range.

  <power failure>

  $ mount /dev/sdc /mnt
  mount: /mnt: can't read superblock on /dev/sdc.

  $ dmesg
  (...)
  [87849.840509] BTRFS info (device sdc): start tree-log replay
  [87849.875719] BTRFS critical (device sdc): corrupt leaf: root=5 block=30539776 slot=554 ino=1458, invalid nlink: has 2 expect no more than 1 for dir
  [87849.878084] BTRFS info (device sdc): leaf 30539776 gen 7 total ptrs 557 free space 2092 owner 5
  [87849.879516] BTRFS info (device sdc): refs 1 lock_owner 0 current 2099108
  [87849.880613] 	item 0 key (1181 1 0) itemoff 65275 itemsize 160
  [87849.881544] 		inode generation 6 size 0 mode 100644
  [87849.882692] 	item 1 key (1181 12 257) itemoff 65258 itemsize 17
  (...)
  [87850.562549] 	item 556 key (1458 12 257) itemoff 16017 itemsize 14
  [87850.563349] BTRFS error (device dm-0): block=30539776 write time tree block corruption detected
  [87850.564386] ------------[ cut here ]------------
  [87850.564920] WARNING: CPU: 3 PID: 2099108 at fs/btrfs/disk-io.c:465 csum_one_extent_buffer+0xed/0x100 [btrfs]
  [87850.566129] Modules linked in: btrfs dm_zero dm_snapshot (...)
  [87850.573789] CPU: 3 PID: 2099108 Comm: mount Not tainted 5.12.0-rc8-btrfs-next-86 #1
  (...)
  [87850.587481] Call Trace:
  [87850.587768]  btree_csum_one_bio+0x244/0x2b0 [btrfs]
  [87850.588354]  ? btrfs_bio_fits_in_stripe+0xd8/0x110 [btrfs]
  [87850.589003]  btrfs_submit_metadata_bio+0xb7/0x100 [btrfs]
  [87850.589654]  submit_one_bio+0x61/0x70 [btrfs]
  [87850.590248]  submit_extent_page+0x91/0x2f0 [btrfs]
  [87850.590842]  write_one_eb+0x175/0x440 [btrfs]
  [87850.591370]  ? find_extent_buffer_nolock+0x1c0/0x1c0 [btrfs]
  [87850.592036]  btree_write_cache_pages+0x1e6/0x610 [btrfs]
  [87850.592665]  ? free_debug_processing+0x1d5/0x240
  [87850.593209]  do_writepages+0x43/0xf0
  [87850.593798]  ? __filemap_fdatawrite_range+0xa4/0x100
  [87850.594391]  __filemap_fdatawrite_range+0xc5/0x100
  [87850.595196]  btrfs_write_marked_extents+0x68/0x160 [btrfs]
  [87850.596202]  btrfs_write_and_wait_transaction.isra.0+0x4d/0xd0 [btrfs]
  [87850.597377]  btrfs_commit_transaction+0x794/0xca0 [btrfs]
  [87850.598455]  ? _raw_spin_unlock_irqrestore+0x32/0x60
  [87850.599305]  ? kmem_cache_free+0x15a/0x3d0
  [87850.600029]  btrfs_recover_log_trees+0x346/0x380 [btrfs]
  [87850.601021]  ? replay_one_extent+0x7d0/0x7d0 [btrfs]
  [87850.601988]  open_ctree+0x13c9/0x1698 [btrfs]
  [87850.602846]  btrfs_mount_root.cold+0x13/0xed [btrfs]
  [87850.603771]  ? kmem_cache_alloc_trace+0x7c9/0x930
  [87850.604576]  ? vfs_parse_fs_string+0x5d/0xb0
  [87850.605293]  ? kfree+0x276/0x3f0
  [87850.605857]  legacy_get_tree+0x30/0x50
  [87850.606540]  vfs_get_tree+0x28/0xc0
  [87850.607163]  fc_mount+0xe/0x40
  [87850.607695]  vfs_kern_mount.part.0+0x71/0x90
  [87850.608440]  btrfs_mount+0x13b/0x3e0 [btrfs]
  (...)
  [87850.629477] ---[ end trace 68802022b99a1ea0 ]---
  [87850.630849] BTRFS: error (device sdc) in btrfs_commit_transaction:2381: errno=-5 IO failure (Error while writing out transaction)
  [87850.632422] BTRFS warning (device sdc): Skipping commit of aborted transaction.
  [87850.633416] BTRFS: error (device sdc) in cleanup_transaction:1978: errno=-5 IO failure
  [87850.634553] BTRFS: error (device sdc) in btrfs_replay_log:2431: errno=-5 IO failure (Failed to recover log tree)
  [87850.637529] BTRFS error (device sdc): open_ctree failed

In this example the inode we moved was a directory, so it was easy to
detect the problem because directories can only have one hard link and
the tree checker immediately detects that. If the moved inode was a file,
then the log replay would succeed and we would end up having both the
new hard link (/mnt/foo) and the old hard link (/mnt/testdir/foo) present,
but only the new one should be present.

Fix this by forcing re-logging of the old parent directory when logging
the new name during a rename operation. This ensures we end up with a log
that is authoritative for a range covering the keys for the old dentry,
therefore causing the old dentry do be deleted when replaying the log.

A test case for fstests will follow up soon.

Fixes: 64d6b281ba ("btrfs: remove unnecessary check_parent_dirs_for_sync()")
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-05-14 01:23:04 +02:00
Boris Burkov
15c7745c9a btrfs: return whole extents in fiemap
`xfs_io -c 'fiemap <off> <len>' <file>`

can give surprising results on btrfs that differ from xfs.

btrfs prints out extents trimmed to fit the user input. If the user's
fiemap request has an offset, then rather than returning each whole
extent which intersects that range, we also trim the start extent to not
have start < off.

Documentation in filesystems/fiemap.txt and the xfs_io man page suggests
that returning the whole extent is expected.

Some cases which all yield the same fiemap in xfs, but not btrfs:
  dd if=/dev/zero of=$f bs=4k count=1
  sudo xfs_io -c 'fiemap 0 1024' $f
    0: [0..7]: 26624..26631
  sudo xfs_io -c 'fiemap 2048 1024' $f
    0: [4..7]: 26628..26631
  sudo xfs_io -c 'fiemap 2048 4096' $f
    0: [4..7]: 26628..26631
  sudo xfs_io -c 'fiemap 3584 512' $f
    0: [7..7]: 26631..26631
  sudo xfs_io -c 'fiemap 4091 5' $f
    0: [7..6]: 26631..26630

I believe this is a consequence of the logic for merging contiguous
extents represented by separate extent items. That logic needs to track
the last offset as it loops through the extent items, which happens to
pick up the start offset on the first iteration, and trim off the
beginning of the full extent. To fix it, start `off` at 0 rather than
`start` so that we keep the iteration/merging intact without cutting off
the start of the extent.

after the fix, all the above commands give:

  0: [0..7]: 26624..26631

The merging logic is exercised by fstest generic/483, and I have written
a new fstest for checking we don't have backwards or zero-length fiemaps
for cases like those above.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-05-14 01:23:00 +02:00
Josef Bacik
71795ee590 btrfs: avoid RCU stalls while running delayed iputs
Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally.  However there's no guarantee of this, especially for small
files.  In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:

  host count: 5
  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208
   	(t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1
  CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1
  Call Trace:
    <IRQ> dump_stack+0x50/0x70
    nmi_cpu_backtrace.cold.6+0x30/0x65
    ? lapic_can_unplug_cpu.cold.30+0x40/0x40
    nmi_trigger_cpumask_backtrace+0xba/0xca
    rcu_dump_cpu_stacks+0x99/0xc7
    rcu_sched_clock_irq.cold.90+0x1b2/0x3a3
    ? trigger_load_balance+0x5c/0x200
    ? tick_sched_do_timer+0x60/0x60
    ? tick_sched_do_timer+0x60/0x60
    update_process_times+0x24/0x50
    tick_sched_timer+0x37/0x70
    __hrtimer_run_queues+0xfe/0x270
    hrtimer_interrupt+0xf4/0x210
    smp_apic_timer_interrupt+0x5e/0x120
    apic_timer_interrupt+0xf/0x20 </IRQ>
   RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0
   RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
   RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029
   RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200
   RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000
   R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200
   R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870
   ? kzalloc.constprop.57+0x30/0x30
   list_lru_add+0x5a/0x100
   inode_lru_list_add+0x20/0x40
   iput+0x1c1/0x1f0
   run_delayed_iput_locked+0x46/0x90
   btrfs_run_delayed_iputs+0x3f/0x60
   cleaner_kthread+0xf2/0x120
   kthread+0x10b/0x130

Fix this by adding a cond_resched_lock() to the loop processing delayed
iputs so we can avoid these sort of stalls.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-05-14 01:22:53 +02:00
Johannes Thumshirn
d6f67afbdf btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
Commit 7000babdda ("btrfs: assign proper values to a bool variable in
dev_extent_hole_check_zoned") assigned false to the hole_start parameter
of dev_extent_hole_check_zoned().

The hole_start parameter is not boolean and returns the start location of
the found hole.

Fixes: 7000babdda ("btrfs: assign proper values to a bool variable in dev_extent_hole_check_zoned")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-05-14 01:22:48 +02:00
Dave Airlie
08f0cfbf73 Merge tag 'amd-drm-fixes-5.13-2021-05-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.13-2021-05-13:

amdgpu:
- Fixes for flexible array conversions
- Fix sysfs attribute init
- Harvesting fixes
- VCN CG/PG fixes for Picasso

radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513163228.3963-1-alexander.deucher@amd.com
2021-05-14 09:20:04 +10:00
Dave Airlie
1db7aa269a A BO list maintainance fix for TTM, removing an unused function and a
MAINTAINERS update.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYJ0rMAAKCRDj7w1vZxhR
 xXy7AQCoRykDurhX833kRT3RuMZpxNdxVybC/P8buYVGtHwC3QD8D7yXL+DY8/mt
 iJGaVnb+ZBp8XsO034ROlVux/pB1DA8=
 =3uhR
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2021-05-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Remove an unused function and a MAINTAINERS update.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513133617.xq77wwrehpuh7yn2@hendrix
2021-05-14 09:19:38 +10:00
Gustavo A. R. Silva
ea89c862f0 net: mana: Use struct_size() in kzalloc()
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows
that, in the worst scenario, could lead to heap overflows.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:58:46 -07:00
Gustavo A. R. Silva
fe0bdaec8d bpf: Use struct_size() in kzalloc()
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows
that, in the worst scenario, could lead to heap overflows.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:58:00 -07:00
Guenter Roeck
0f3ee28033 net: caif: Drop unnecessary NULL check after container_of
The first parameter passed to chnl_recv_cb() can never be NULL since all
callers dereferenced it. Consequently, container_of() on it is also never
NULL, even though the reference into the structure points to the first
element of the structure. The NULL check is therefore unnecessary.
On top of that, it is misleading to perform a NULL check on the result of
container_of() because the position of the contained element could change,
which would make the test invalid. Remove the unnecessary NULL check.

This change was made automatically with the following Coccinelle script.

@@
type t;
identifier v;
statement s;
@@

<+...
(
  t v = container_of(...);
|
  v = container_of(...);
)
  ...
  when != v
- if (\( !v \| v == NULL \) ) s
...+>

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:55:50 -07:00
Tao Liu
e4df1b0c24 openvswitch: meter: fix race when getting now_ms.
We have observed meters working unexpected if traffic is 3+Gbit/s
with multiple connections.

now_ms is not pretected by meter->lock, we may get a negative
long_delta_ms when another cpu updated meter->used, then:
    delta_ms = (u32)long_delta_ms;
which will be a large value.

    band->bucket += delta_ms * band->rate;
then we get a wrong band->bucket.

OpenVswitch userspace datapath has fixed the same issue[1] some
time ago, and we port the implementation to kernel datapath.

[1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1-i.maximets@ovn.org/

Fixes: 96fbc13d7e ("openvswitch: Add meter infrastructure")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:54:59 -07:00
Wei Yongjun
c7d8302478 net: korina: Fix return value check in korina_probe()
In case of error, the function devm_platform_ioremap_resource_byname()
returns ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().

Fixes: b4cd249a8c ("net: korina: Use devres functions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:54:08 -07:00
Colin Ian King
5efe257531 net: qed: remove redundant initialization of variable rc
The variable rc is being initialized with a value that is never read,
it is being updated later on.  The assignment is redundant and can be
removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:52:22 -07:00
David S. Miller
25e248a2bc Merge branch 'virtio_net-fixes'
Xuan Zhuo says:

====================
virtio-net: fix for build_skb()

The logic of this piece is really messy. Fortunately, my refactored patch can be
completed with a small amount of testing.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:51:14 -07:00
Xuan Zhuo
7bf64460e3 virtio-net: get build_skb() buf by data ptr
In the case of merge, the page passed into page_to_skb() may be a head
page, not the page where the current data is located. So when trying to
get the buf where the data is located, you should directly use the
pointer(p) to get the address corresponding to the page.

At the same time, the offset of the data in the page should also be
obtained using offset_in_page().

This patch solves this problem. But if you don’t use this patch, the
original code can also run, because if the page is not the page of the
current data, the calculated tailroom will be less than 0, and will not
enter the logic of build_skb() . The significance of this patch is to
modify this logical problem, allowing more situations to use
build_skb().

Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:51:14 -07:00
Xuan Zhuo
6c66c147b9 virtio-net: fix for unable to handle page fault for address
In merge mode, when xdp is enabled, if the headroom of buf is smaller
than virtnet_get_headroom(), xdp_linearize_page() will be called but the
variable of "headroom" is still 0, which leads to wrong logic after
entering page_to_skb().

[   16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[   16.602175] #PF: supervisor read access in kernel mode
[   16.603350] #PF: error_code(0x0000) - not-present page
[   16.604200] PGD 0 P4D 0
[   16.604686] Oops: 0000 [#1] SMP PTI
[   16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G    B             5.12.0+ #312
[   16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04
[   16.608217] RIP: 0010:unmap_page_range+0x947/0xde0
[   16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[   16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[   16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[   16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[   16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[   16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[   16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[   16.618423] FS:  0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[   16.619738] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[   16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.624047] Call Trace:
[   16.624525]  ? release_pages+0x24d/0x730
[   16.625209]  unmap_single_vma+0xa9/0x130
[   16.625885]  unmap_vmas+0x76/0xf0
[   16.626480]  exit_mmap+0xa0/0x210
[   16.627129]  mmput+0x67/0x180
[   16.627673]  do_exit+0x3d1/0xf10
[   16.628259]  ? do_user_addr_fault+0x231/0x840
[   16.629000]  do_group_exit+0x53/0xd0
[   16.629631]  __x64_sys_exit_group+0x1d/0x20
[   16.630354]  do_syscall_64+0x3c/0x80
[   16.630988]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   16.631828] RIP: 0033:0x7f1a043d0191
[   16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167.
[   16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[   16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191
[   16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[   16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001
[   16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490
[   16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000
[   16.640408] Modules linked in:
[   16.640958] CR2: ffffecbfff7b43c8
[   16.641557] ---[ end trace bc4891c6ce46354c ]---
[   16.642335] RIP: 0010:unmap_page_range+0x947/0xde0
[   16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[   16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[   16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[   16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[   16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[   16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[   16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[   16.652529] FS:  0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[   16.653887] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[   16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.658290] Kernel panic - not syncing: Fatal exception
[   16.659613] Kernel Offset: disabled
[   16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]---

Fixes: fb32856b16 ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:51:14 -07:00
David S. Miller
33b3142656 Merge branch 'atl1c-support-for-Mikrotik-10-25G-NIC-features'
Gatis Peisenieks says:

====================
atl1c: support for Mikrotik 10/25G NIC features

The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c
driver. However it does have new features.

This patch set adds support for reporting cards higher link speed, max-mtu,
enables rx csum offload and improves tx performance.

v2:
    - fixed xmit_more handling as pointed out by Eric Dumazet
    - added a more reliable link detection on Mikrotik 10/25G NIC
      since MDIO op emulation can occasionally fail
Guangbin Huang says:
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:48:11 -07:00
Gatis Peisenieks
ea0fbd05d7 atl1c: improve link detection reliability on Mikrotik 10/25G NIC
Mikrotik 10/25G NIC emulates the MDIO accesses, but the emulation is
not 100% reliable - the MDIO ops occasionally can timeout.

This adds a reliable way of detecting link on Mikrotik 10/25G NIC.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:48:10 -07:00
Gatis Peisenieks
b039000950 atl1c: enable rx csum offload on Mikrotik 10/25G NIC
Mikrotik 10/25G NIC supports hw checksum verification on rx for
IP/IPv6 + TCP/UDP packets. HW checksum offload helps reduce host
cpu load.

This enables the csum offload specifically for Mikrotik 10/25G NIC
as other HW supported by the driver is known to have problems with it.

TCP iperf3 to Threadripper 3960X with NIC improved 16.5 -> 20.0 Gbps
with mtu=1500.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:48:10 -07:00
Gatis Peisenieks
545fa3fb1e atl1c: adjust max mtu according to Mikrotik 10/25G NIC ability
The new Mikrotik 10/25G NIC supports jumbo frames. Jumbo frames are
supported for TSO as well.

This enables the support for mtu up to 9500 bytes.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:48:10 -07:00
Gatis Peisenieks
d7ab6419bd atl1c: improve performance by avoiding unnecessary pcie writes on xmit
The kernel has xmit_more facility that hints the networking driver xmit
path about whether more packets are coming soon. This information can be
used to avoid unnecessary expensive PCIe transaction per tx packet.

Max TX pps on Mikrotik 10/25G NIC in a Threadripper 3960X system
improved from 1150Kpps to 1700Kpps.

Testing L2 forwarding on AR8151 hardware did not reveal a measurable
increase in latency.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:48:10 -07:00
Gatis Peisenieks
f19d4997fd atl1c: show correct link speed on Mikrotik 10/25G NIC
The new Mikrotik 10/25G NIC maintains compatibility with existing atl1c
driver. However it does have new features.

This defines some new register offsets, code for identifying the new type
of NIC and correct speed detection for the NIC.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:48:10 -07:00
Ayush Sawal
65e302a9bd cxgb4/ch_ktls: Clear resources when pf4 device is removed
This patch maintain the list of active tids and clear all the active
connection resources when DETACH notification comes.

Fixes: a8c16e8ed6 ("crypto/chcr: move nic TLS functionality to drivers/net")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:44:54 -07:00
Christophe JAILLET
e1d027dd97 net: mdio: octeon: Fix some double free issues
'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.

Remove the incorrect 'mdiobus_free' in the error handling path of the
probe function and in remove function.

Suggested-By: Andrew Lunn <andrew@lunn.ch>
Fixes: 35d2aeac98 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:43:52 -07:00
David S. Miller
0d59c95ea3 Merge branch 'hinic-cleanups'
Guangbin Huang says:

====================
net: hinic: some cleanups

This patchset adds some cleanups for the hinic ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:39:10 -07:00
Guangbin Huang
5db8c86e89 net: hinic: fix misspelled "acessing"
The word "acessing" is misspelled, so fix it.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:39:10 -07:00
Guangbin Huang
c8ad5df615 net: hinic: remove unnecessary parentheses
There are some unnecessary parentheses, this patch deletes them.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:39:10 -07:00
Guangbin Huang
3402ab54a8 net: hinic: add blank line after function declaration
There should be a blank line after function declaration, so add two
missed blank lines.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:39:10 -07:00
Guangbin Huang
9afcb59597 net: hinic: remove unnecessary blank line
There are two blank lines are unnecessary, this patch removes them.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 15:39:10 -07:00
David S. Miller
d38717af2c Merge branch 'bridge-split-ipv4-ipv6-mc-router-state'
Linus Lüssing says:

====================
net: bridge: split IPv4/v6 mc router state and export for batman-adv

The following patches are splitting the so far combined multicast router
state in the Linux bridge into two ones, one for IPv4 and one for IPv6,
for a more fine-grained detection of multicast routers. This avoids
sending IPv4 multicast packets to an IPv6-only multicast router and
avoids sending IPv6 multicast packets to an IPv4-only multicast router.
This also allows batman-adv to make use of the now split information in
the final patch.

The first eight patches prepare the bridge code to avoid duplicate
code or IPv6-#ifdef clutter for the multicast router state split. And
contain no functional changes yet.

The ninth patch then implements the IPv4+IPv6 multicast router state
split.

Patch number ten adds IPv4+IPv6 specific timers to the mdb netlink
router port dump, so that the timers validity can be checked individually
from userspace.

The final, eleventh patch exports this now per protocol family multicast
router state so that batman-adv can then later make full use of the
Multicast Router Discovery (MRD) support in the Linux bridge. The
batman-adv protocol format currently expects separate multicast router
states for IPv4 and IPv6, therefore it depends on the first patch.
batman-adv will then make use of this newly exported functions like
this[0].

Regards, Linus

[0]: https://git.open-mesh.org/batman-adv.git/shortlog/refs/heads/linus/multicast-routeable-mrd
     -> d4bed3a924

Changelog v3:

* Patch 01/11:
  * fixed/added missing rename of br->router_list to
    br->ip4_mc_router_list in br_multicast_flood()
* Patch 02/11:
  * moved inline functions from br_forward.c to br_private.h
* Patch 03/11:
  * removed inline attribute from functions added to br_mdb.c
* Patch 04/11:
  * unchanged
* Patch 05/11:
  * converted if()'s into switch-case in br_multicast_is_router()
* Patch 06/11:
  * removed inline attribute from function added to br_multicast.c
* Patch 07/11:
  * added missing static attribute to function
    br_ip4_multicast_get_rport_slot() added to br_multicast.c
* Patch 08/11:
  * removed inline attribute from function added to br_multicast.c
* Patch 09/11:
  * added missing static attribute to function
    br_ip6_multicast_get_rport_slot() added to br_multicast.c
  * removed inline attribute from function added to br_multicast.c
* Patch 10/11:
  * unchanged
* Patch 11/11:
  * simplified bridge check in br_multicast_has_router_adjacent()
    by using br_port_get_check_rcu()
  * added missing declaration for br_multicast_has_router_adjacent()
    in include/linux/if_bridge.h

Changelog v2:

* split into multiple patches as suggested by Nikolay
* added helper functions to br_multicast_flood(), avoiding
  IPv6 #ifdef clutter
* fixed reverse xmas tree ordering in br_rports_fill_info() and
  added helper functions to avoid IPv6 #ifdef clutter
* Added a common br_multicast_add_router() and a helper function
  to retrieve the correct slot to avoid duplicate code for an
  ip4 and ip6 variant
* replaced the "1" and "2" constants in br_multicast_is_router()
  with the appropriate enums
* added br_{ip4,ip6}_multicast_rport_del() wrappers to reduce
  IPv6 #ifdef clutter
* added return values to br_*multicast_rport_del() to only notify
  if the port was actually removed and did not race with a readdition
  somewhere else
* added empty, void br_ip6_multicast_mark_router() if compiled
  without IPv6, to reduce IPv6 #ifdef clutter
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
3b85f9ba34 net: bridge: mcast: export multicast router presence adjacent to a port
To properly support routable multicast addresses in batman-adv in a
group-aware way, a batman-adv node needs to know if it serves multicast
routers.

This adds a function to the bridge to export this so that batman-adv
can then make full use of the Multicast Router Discovery capability of
the bridge.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
b7fb091654 net: bridge: mcast: add ip4+ip6 mcast router timers to mdb netlink
Now that we have split the multicast router state into two, one for IPv4
and one for IPv6, also add individual timers to the mdb netlink router
port dump. Leaving the old timer attribute for backwards compatibility.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
a3c02e769e net: bridge: mcast: split multicast router state for IPv4 and IPv6
A multicast router for IPv4 does not imply that the same host also is a
multicast router for IPv6 and vice versa.

To reduce multicast traffic when a host is only a multicast router for
one of these two protocol families, keep router state for IPv4 and IPv6
separately. Similar to how querier state is kept separately.

For backwards compatibility for netlink and switchdev notifications
these two will still only notify if a port switched from either no
IPv4/IPv6 multicast router to any IPv4/IPv6 multicast router or the
other way round. However a full netlink MDB router dump will now also
include a multicast router timeout for both IPv4 and IPv6.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
ed2d35971a net: bridge: mcast: split router port del+notify for mcast router split
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants split router port deletion and notification
into two functions. When we disable a port for instance later we want to
only send one notification to switchdev and netlink for compatibility
and want to avoid sending one for IPv4 and one for IPv6. For that the
split is needed.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
d9b8c4d8d9 net: bridge: mcast: prepare add-router function for mcast router split
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants move the protocol specific router list
and timer access to ip4 wrapper functions.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
ee5fb2223e net: bridge: mcast: prepare expiry functions for mcast router split
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants move the protocol specific timer access to
an ip4 wrapper function.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
1a3065a268 net: bridge: mcast: prepare is-router function for mcast router split
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants make br_multicast_is_router() protocol
family aware.

Note that for now br_ip6_multicast_is_router() uses the currently still
common ip4_mc_router_timer for now. It will be renamed to
ip6_mc_router_timer later when the split is performed.

While at it also renames the "1" and "2" constants in
br_multicast_is_router() to the MDB_RTR_TYPE_TEMP_QUERY and
MDB_RTR_TYPE_PERM enums.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
b19232effd net: bridge: mcast: prepare query reception for mcast router split
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants and as the br_multicast_mark_router() will
be split for that remove the select querier wrapper and instead add
ip4 and ip6 variants for br_multicast_query_received().

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
ff391c5d98 net: bridge: mcast: prepare mdb netlink for mcast router split
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants and to avoid IPv6 #ifdef clutter later add
some inline functions for the protocol specific parts in the mdb router
netlink code. Also the we need iterate over the port instead of router
list to be able put one router port entry with both the IPv4 and IPv6
multicast router info later.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00
Linus Lüssing
44ebb081dc net: bridge: mcast: add wrappers for router node retrieval
In preparation for the upcoming split of multicast router state into
their IPv4 and IPv6 variants and to avoid IPv6 #ifdef clutter later add
two wrapper functions for router node retrieval in the payload
forwarding code.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-13 14:04:31 -07:00