Pull fs fixes from Al Viro:
"Fairly old hostfs bug (in setups that are not used by anyone,
apparently) + fix for this cycle regression: extra dput/mntput in
LOOKUP_CACHED failure handling"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Make sure nd->path.mnt and nd->path.dentry are always valid pointers
hostfs: fix memory handling in follow_link()
Typically the mem_commands[] array is in sync with 'enum { CXL_CMDS }'.
Current code works well.
However, the array size of mem_commands[] may not strictly be the same
as CXL_MEM_COMMAND_ID_MAX. E.g. if a new CXL_CMD() is added that is
guarded by #ifdefs, the array could be shorter. This could lead then
further to an out-of-bounds array access in cxl_validate_cmd_from_user().
Fix this by forcing the array size to CXL_MEM_COMMAND_ID_MAX. This
also adds range checks for array items in mem_commands[] at compile
time.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210324141635.22335-1-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There is no power management of cxl virtual devices, disable
device-power-management and runtime-power-management to prevent
userspace from growing expectations of those attributes appearing. They
can be added back in the future if needed.
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/161728761025.2474381.808344500111924819.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While device_add() will happen to catch dev_set_name() failures it is a
broken pattern to follow given that the core may try to fall back to a
different name.
Add explicit checking for dev_set_name() failures to be cleaned up by
put_device(). Skip cdev_device_add() and proceed directly to
put_device() if the name set fails.
This type of bug is easier to see if 'alloc' is split from 'add'
operations that require put_device() on failure. So cxl_memdev_alloc()
is split out as a result.
Fixes: b39cb1052a ("cxl/mem: Register CXL memX devices")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/161728760514.2474381.1163928273337158134.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The percpu_ref to gate whether cxl_memdev_ioctl() is free to use the
driver context (@cxlm) to issue I/O is overkill, implemented incorrectly
(missing a device reference before accessing the percpu_ref), and the
complexities of shutting down a percpu_ref contributed to a bug in the
error unwind in cxl_mem_add_memdev() (missing put_device() to be fixed
separately).
Use an rwsem to explicitly synchronize the usage of cxlmd->cxlm, and add
the missing reference counting for cxlmd in cxl_memdev_open() and
cxl_memdev_release_file().
Fixes: b39cb1052a ("cxl/mem: Register CXL memX devices")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/161728759948.2474381.17481500816783671817.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While none the CXL sysfs attributes are threatening to overrun a
PAGE_SIZE of output, it is good form to use the recommended helpers.
Fixes: b39cb1052a ("cxl/mem: Register CXL memX devices")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/161728759424.2474381.11231441014951343463.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There are no longer any users, so it can go away. Everything is using
container_of now.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <14-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This tidies a few confused places that think they can have a refcount on
the vfio_device but the device_data could be NULL, that isn't possible by
design.
Most of the change falls out when struct vfio_devices is updated to just
store the struct vfio_pci_device itself. This wasn't possible before
because there was no easy way to get from the 'struct vfio_pci_device' to
the 'struct vfio_device' to put back the refcount.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <13-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is the standard kernel pattern, the ops associated with a struct get
the struct pointer in for typesafety. The expected design is to use
container_of to cleanly go from the subsystem level type to the driver
level type without having any type erasure in a void *.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <12-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The macro wrongly uses 'dev' as both the macro argument and the member
name, which means it fails compilation if any caller uses a word other
than 'dev' as the single argument. Fix this defect by making it into
proper static inline, which is more clear and typesafe anyhow.
Fixes: 99e3123e3d ("vfio-mdev: Make mdev_device private and abstract interfaces")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <11-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mdev gets little benefit because it doesn't actually do anything, however
it is the last user, so move the vfio_init/register/unregister_group_dev()
code here for now.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <10-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
pci already allocates a struct vfio_pci_device with exactly the same
lifetime as vfio_device, switch to the new API and embed vfio_device in
vfio_pci_device.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <9-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_add_group_dev() must be called only after all of the private data in
vdev is fully setup and ready, otherwise there could be races with user
space instantiating a device file descriptor and starting to call ops.
For instance vfio_pci_reflck_attach() sets vdev->reflck and
vfio_pci_open(), called by fops open, unconditionally derefs it, which
will crash if things get out of order.
Fixes: cc20d79990 ("vfio/pci: Introduce VF token")
Fixes: e309df5b0c ("vfio/pci: Parallelize device open and release")
Fixes: 6eb7018705 ("vfio-pci: Move idle devices to D3hot power state")
Fixes: ecaa1f6a01 ("vfio-pci: Add VGA arbiter client")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <8-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_pci_probe() is quite complicated, with optional VF and VGA sub
components. Move these into clear init/uninit functions and have a linear
flow in probe/remove.
This fixes a few little buglets:
- vfio_pci_remove() is in the wrong order, vga_client_register() removes
a notifier and is after kfree(vdev), but the notifier refers to vdev,
so it can use after free in a race.
- vga_client_register() can fail but was ignored
Organize things so destruction order is the reverse of creation order.
Fixes: ecaa1f6a01 ("vfio-pci: Add VGA arbiter client")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <7-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
fsl-mc already allocates a struct vfio_fsl_mc_device with exactly the same
lifetime as vfio_device, switch to the new API and embed vfio_device in
vfio_fsl_mc_device. While here remove the devm usage for the vdev, this
code is clean and doesn't need devm.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <6-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_add_group_dev() must be called only after all of the private data in
vdev is fully setup and ready, otherwise there could be races with user
space instantiating a device file descriptor and starting to call ops.
For instance vfio_fsl_mc_reflck_attach() sets vdev->reflck and
vfio_fsl_mc_open(), called by fops open, unconditionally derefs it, which
will crash if things get out of order.
This driver started life with the right sequence, but two commits added
stuff after vfio_add_group_dev().
Fixes: 2e0d29561f ("vfio/fsl-mc: Add irq infrastructure for fsl-mc devices")
Fixes: f2ba7e8c94 ("vfio/fsl-mc: Added lock support in preparation for interrupt handling")
Co-developed-by: Diana Craciun OSS <diana.craciun@oss.nxp.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <5-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
platform already allocates a struct vfio_platform_device with exactly
the same lifetime as vfio_device, switch to the new API and embed
vfio_device in vfio_platform_device.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <4-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This makes the struct vfio_device part of the public interface so it
can be used with container_of and so forth, as is typical for a Linux
subystem.
This is the first step to bring some type-safety to the vfio interface by
allowing the replacement of 'void *' and 'struct device *' inputs with a
simple and clear 'struct vfio_device *'
For now the self-allocating vfio_add_group_dev() interface is kept so each
user can be updated as a separate patch.
The expected usage pattern is
driver core probe() function:
my_device = kzalloc(sizeof(*mydevice));
vfio_init_group_dev(&my_device->vdev, dev, ops, mydevice);
/* other driver specific prep */
vfio_register_group_dev(&my_device->vdev);
dev_set_drvdata(dev, my_device);
driver core remove() function:
my_device = dev_get_drvdata(dev);
vfio_unregister_group_dev(&my_device->vdev);
/* other driver specific tear down */
kfree(my_device);
Allowing the driver to be able to use the drvdata and vfio_device to go
to/from its own data.
The pattern also makes it clear that vfio_register_group_dev() must be
last in the sequence, as once it is called the core code can immediately
start calling ops. The init/register gap is provided to allow for the
driver to do setup before ops can be called and thus avoid races.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <3-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_device is using a 'sleep until all refs go to zero' pattern for
its lifetime, but it is indirectly coded by repeatedly scanning the group
list waiting for the device to be removed on its own.
Switch this around to be a direct representation, use a refcount to count
the number of places that are blocking destruction and sleep directly on a
completion until that counter goes to zero. kfree the device after other
accesses have been excluded in vfio_del_group_dev(). This is a fairly
common Linux idiom.
Due to this we can now remove kref_put_mutex(), which is very rarely used
in the kernel. Here it is being used to prevent a zero ref device from
being seen in the group list. Instead allow the zero ref device to
continue to exist in the device_list and use refcount_inc_not_zero() to
exclude it once refs go to zero.
This patch is organized so the next patch will be able to alter the API to
allow drivers to provide the kfree.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <2-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_device->group value has a get obtained during
vfio_add_group_dev() which gets moved from the stack to vfio_device->group
in vfio_group_create_device().
The reference remains until we reach the end of vfio_del_group_dev() when
it is put back.
Thus anything that already has a kref on the vfio_device is guaranteed a
valid group pointer. Remove all the extra reference traffic.
It is tricky to see, but the get at the start of vfio_del_group_dev() is
actually pairing with the put hidden inside vfio_device_put() a few lines
below.
A later patch merges vfio_group_create_device() into vfio_add_group_dev()
which makes the ownership and error flow on the create side easier to
follow.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <1-v3-225de1400dfc+4e074-vfio1_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This driver never had any open userspace (which for VFIO would include
VM kernel drivers) that use it, and thus should never have been added
by our normal userspace ABI rules.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20210326061311.1497642-2-hch@lst.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The check i > npage at the end of vfio_iommu_type1_unpin_pages is unused
unless npage < 0, but if npage < 0, this function will return npage, which
should return -EINVAL instead. So let's just check the parameter npage at
the start of the function. By the way, replace unpin_exit with break.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Message-Id: <20210406135009.1707-1-lushenming@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There is a spelling mistake in a comment, fix it.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210326083528.1329-5-thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are several spelling mistakes, as follows:
thru ==> through
presense ==> presence
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210326083528.1329-4-thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There is a spelling mistake in a comment, fix it.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210326083528.1329-3-thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are several spelling mistakes, as follows:
userpsace ==> userspace
Accouting ==> Accounting
exlude ==> exclude
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210326083528.1329-2-thunder.leizhen@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Before opregion version 2.0 VBT data is stored in opregion mailbox #4,
but when VBT data exceeds 6KB size and cannot be within mailbox #4
then from opregion v2.0+, Extended VBT region, next to opregion is
used to hold the VBT data, so the total size will be opregion size plus
extended VBT region size.
Since opregion v2.0 with physical host VBT address would not be
practically available for end user and guest can not directly access
host physical address, so it is not supported.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Swee Yee Fonn <swee.yee.fonn@intel.com>
Signed-off-by: Fred Gao <fred.gao@intel.com>
Message-Id: <20210325170953.24549-1-fred.gao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This blank line is unnecessary, so remove it.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Message-Id: <1615808073-178604-1-git-send-email-wangzhou1@hisilicon.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fixes scripts/kernel-doc warnings:
s5p_mfc_common.h:343: warning: Function parameter or member 'fw_buf' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_size' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_base' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_bitmap' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'mem_virt' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'dma_base' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'watchdog_timer' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'fw_get_done' not described in 's5p_mfc_dev'
s5p_mfc_common.h:343: warning: Function parameter or member 'risc_on' not described in 's5p_mfc_dev'
s5p_mfc_common.h:714: warning: Function parameter or member 'src_bufs_cnt' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'dst_bufs_cnt' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'pb_count' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'force_frame_type' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'slice_mode' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'slice_size' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'frame_tag' not described in 's5p_mfc_ctx'
s5p_mfc_common.h:714: warning: Function parameter or member 'scratch_buf_size' not described in 's5p_mfc_ctx'
Reported-by: Hans verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes scripts/kernel-doc warnings:
fimc-is.h:286: warning: Function parameter or member 'fw' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'memory' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'f_w' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'isp' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'sensor' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'setfile' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'ctrl_handler' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'irq' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'sensor_index' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'i2h_cmd' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'h2i_cmd' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'fd_header' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'config' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'config_index' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'is_p_region' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'is_dma_p_region' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'is_shared_region' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'af' not described in 'fimc_is'
fimc-is.h:286: warning: Function parameter or member 'debugfs_entry' not described in 'fimc_is'
The f_w field is unused so remove it.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the EDID has an odd number of blocks (usually just 1, but the
same problem occurs with 3 blocks), then VIDIOC_G_EDID reported 2
(or 4) blocks. Fix this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While the adv7604/11/12 hardware supported EDIDs up to 4 blocks, the
driver didn't. This patch adds support for this. It also improves support
for EDIDs that do not have a Source Physical Address: in that case the
spa location is set to the first byte of the second block, and the
'physical address' is just the two bytes at that location. This is per
the suggestion in the adv76xx documentation for such EDIDs.
Tested with an adv7604 and adv7612.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For the adv7604 the hotplug detect pin is controlled through gpio pins from
the SoC, but the adv7611 and adv7612 control the hotplug detect pin
themselves.
But the driver had no support for this, so the HPD was always high, even
when changing the EDID. Add proper support for this to the driver.
Tested with an adv7612.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.corp-partner.google.com>:
From: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.corp-partner.google.com>
Hi all,
This patch series about creating dailink for Wake on voice functionality
and also adding MST route changes.
changes in v3:
-Remove DP from widgets
-Add MST support in other routing table for kbl_rt5663_max98927.c
v2 is here:
https://patchwork.kernel.org/project/alsa-devel/cover/20210325174325.31802-1-vamshi.krishna.gopal@intel.com/
v1 is here:
https://patchwork.kernel.org/project/alsa-devel/cover/20210324175200.44922-1-vamshi.krishna.gopal@intel.com/
Mac Chiang (1):
ASoc: Intel: board: add BE DAI link for WoV
Vamshi Krishna Gopal (1):
ASoC: Intel: kbl: Add MST route change to kbl machine drivers
sound/soc/intel/boards/kbl_da7219_max98357a.c | 58 +++++++++++++++++--
sound/soc/intel/boards/kbl_da7219_max98927.c | 10 ++--
sound/soc/intel/boards/kbl_rt5663_max98927.c | 14 +++--
3 files changed, 70 insertions(+), 12 deletions(-)
--
2.17.1
According to the v4l2 api, it is allowed to skip
setting a control if its contents haven't changed for performance
reasons: userspace should only update the controls that changed from
last frame rather then updating them all. Still some ancient code
that checks for mandatory controls has been left in this driver.
Remove it.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
And extract sgx_set_attribute() out of sgx_ioc_enclave_provision() and
export it as symbol for KVM to use.
The provisioning key is sensitive. The SGX driver only allows to create
an enclave which can access the provisioning key when the enclave
creator has permission to open /dev/sgx_provision. It should apply to
a VM as well, as the provisioning key is platform-specific, thus an
unrestricted VM can also potentially compromise the provisioning key.
Move the provisioning device creation out of sgx_drv_init() to
sgx_init() as a preparation for adding SGX virtualization support,
so that even if the SGX driver is not enabled due to flexible launch
control not being available, SGX virtualization can still be enabled,
and use it to restrict a VM's capability of being able to access the
provisioning key.
[ bp: Massage commit message. ]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/0f4d044d621561f26d5f4ef73e8dc6cd18cc7e79.1616136308.git.kai.huang@intel.com
The host kernel must intercept ECREATE to impose policies on guests, and
intercept EINIT to be able to write guest's virtual SGX_LEPUBKEYHASH MSR
values to hardware before running guest's EINIT so it can run correctly
according to hardware behavior.
Provide wrappers around __ecreate() and __einit() to hide the ugliness
of overloading the ENCLS return value to encode multiple error formats
in a single int. KVM will trap-and-execute ECREATE and EINIT as part
of SGX virtualization, and reflect ENCLS execution result to guest by
setting up guest's GPRs, or on an exception, injecting the correct fault
based on return value of __ecreate() and __einit().
Use host userspace addresses (provided by KVM based on guest physical
address of ENCLS parameters) to execute ENCLS/EINIT when possible.
Accesses to both EPC and memory originating from ENCLS are subject to
segmentation and paging mechanisms. It's also possible to generate
kernel mappings for ENCLS parameters by resolving PFN but using
__uaccess_xx() is simpler.
[ bp: Return early if the __user memory accesses fail, use
cpu_feature_enabled(). ]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20e09daf559aa5e9e680a0b4b5fba940f1bad86e.1616136308.git.kai.huang@intel.com
Initialize them in set_nameidata() and make sure that terminate_walk() clears them
once the pointers become potentially invalid (i.e. we leave RCU mode or drop them
in non-RCU one). Currently we have "path_init() always initializes them and nobody
accesses them outside of path_init()/terminate_walk() segments", which is asking
for trouble.
With that change we would have nd->path.{mnt,dentry}
1) always valid - NULL or pointing to currently allocated objects.
2) non-NULL while we are successfully walking
3) NULL when we are not walking at all
4) contributing to refcounts whenever non-NULL outside of RCU mode.
Fixes: 6c6ec2b0a3 ("fs: add support for LOOKUP_CACHED")
Reported-by: syzbot+c88a7030da47945a3cc3@syzkaller.appspotmail.com
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
'struct mem_info' is defined at 22nd line.
The declaration here is unnecessary. Remove it.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210406105104.675879-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure that the QBMan device cleanup routines are executed
when the device was previously initialized. This is needed for
kexec since the device will keep it's state from the previous
kernel that was executing.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
create dai link in kbl_da7219_max98357a driver for wake on voice
functionality.
changes picked from broonie's tree
commit 0c7941a63a
("ASoC: Intel: Skylake: Use refcap device for mono recording")
commit 2154be362c
("ASoc: Intel: boards: Add WOV as sink for nau88l25_ssm4567 machine")
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Tested-by: Kaiyen Chang <kaiyen.chang@intel.corp-partner.google.com>
Tested-by: luke yang <luke_yang@compal.corp-partner.google.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Tested-by: Kaiyen Chang <kaiyen.chang@intel.com>
Reviewed-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210405124835.71247-3-vamshi.krishna.gopal@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support MST hdmi audio, modify the current routes to be
based on port in kbl_da7219_max98357a, kbl_da7219_max98927 &
kbl_rt5663_max98927.
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210405124835.71247-2-vamshi.krishna.gopal@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clock registration must be performed before the component is
registered. aic32x4_component_probe attempts to get all the
clocks right off the bat. If the component is registered before
the clocks there is a race condition where the clocks may not
be registered by the time aic32x4_componet_probe actually runs.
Fixes: d1c859d314 ("ASoC: codec: tlv3204: Increased maximum supported channels")
Cc: stable@vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Link: https://lore.kernel.org/r/0101017889850206-dcac4cce-8cc8-4a21-80e9-4e4bef44b981-000000@us-west-2.amazonses.com
Signed-off-by: Mark Brown <broonie@kernel.org>