Since we now call iwl_notification_wait_notify() from the
NAPI poll in soft-IRQ, we get a (valid) lockdep complaint
that we could get a deadlock by taking the spinlock from
sleeping context and then getting the soft-IRQ that also
tries to take it (in NAPI polling).
Fix this by disabling soft-IRQs for this lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 25edc8f259 ("iwlwifi: pcie: properly implement NAPI")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.c3b2e3d6b58b.Ic56f351d04674df70567bab0269cba91bdbc853c@changeid
As the context info gen3 code is only called for >=AX210 devices
(from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR
on 22000 devices cannot actually do anything (22000 < AX210).
Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw()
where it can handle both devices. This then requires that we kick
the firmware only after that rather than doing it from the context
info code.
Note that this again had a dead branch in gen3 code, which I've
removed here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: ed0022da8b ("iwlwifi: pcie: set LTR on more devices")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid
When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1. This was
never changed in the driver, so we were checking for the wrong bit in
newer devices. Fix it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a98 ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid
An error message in the forward scan code incorrectly prints the ID of
the source entity instead of the XU entity being scanned. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CSI-2 receiver requires both its sink pad and its source pad to be
connected through enabled links in order to be started. Ensure this by
setting the MEDIA_PAD_FL_MUST_CONNECT flag on both pads.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
struct task_struct is declared twice. One has been declared
at 154th line. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The .link_setup() handler uses state->lock to protect the src_sd field.
This is only used in mipi_csis_s_stream(), which can't race
.link_setup() as the MC core prevents link setup when the pipeline is
streaming. Drop the lock.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the .s_stream() handler fails after calling pm_runtime_get_sync(),
call pm_runtime_put() in the error path.
While at it add a few blank lines to make the code more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Expand the description of the binding itself and of individual
properties to include additional information that may not be immediately
appartent from reading the reference manual. Drop the last sentence of
the phy-supply description that refers to the driver's implementation.
While at it, fix the capitalization of MIPI CSI-2 in the title.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If count is 16 then this will put the NUL terminator one element beyond
the end of the array.
Fixes: cb17fe0045 ("ALSA: control - add sysfs support to the LED trigger module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/YGcDOtrimR46vr0k@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The same values are parsed several times from transfer and event
TRBs by different functions in the same call path, all while processing
one transfer event.
As the TRBs are in DMA memory and can be accessed by the xHC host we want
to avoid this to prevent double-fetch issues.
To resolve this pass the already parsed values to the different functions
in the path of parsing a transfer event
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Max Interrupters supported by the controller is given in a 10bit
wide bitfield, but the driver uses a fixed 128 size array to index these
interrupters.
Klockwork reports a possible array out of bounds case which in theory
is possible. In practice this hasn't been hit as a common number of Max
Interrupters for new controllers is 8, not even close to 128.
This needs to be fixed anyway
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fsl,csis-hs-settle property isn't used by the driver anymore. Drop
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The reset-names property is incorrect, as it references the reset of the
MIPI D-PHY master, which is used by the DSI controller. Fixing the
property name would create backward-compatibility issues. As the device
has a single reset, we can instead drop reset-names completely, which
also simplifies the binding.
Fix the example accordingly to use the correct reset.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
own_address_type has to changed to 0x02 and 0x03 only when
HCI_ENABLE_LL_PRIVACY flag is set.
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We set hdev->cur_adv_instance in the adv param MGMT request to allow the
callback to the hci param request to set the tx power to the correct
instance. Now that the callbacks use the advertising handle from the hci
request (as they should), this workaround is no longer necessary.
Furthermore, this change resolves a race condition that is more
prevalent when using the extended advertising MGMT calls - if
hdev->cur_adv_instance is set in the params request, then when the data
request is called, we believe our new instance is already active. This
treats it as an update and immediately schedules the instance with the
controller, which has a potential race with the software rotation adv
update. By not setting hdev->cur_adv_instance too early, the new
instance is queued as it should be, to be used when the rotation comes
around again.
This change is tested on harrison peak to confirm that it resolves the
race condition on registration, and that there is no regression in
single- and multi-advertising automated tests.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Some extended advertising hci command complete events are still using
hdev->cur_adv_instance to map the request to the correct advertisement
handle. However, with extended advertising, "current instance" doesn't
make sense as we can have multiple concurrent advertisements. This
change switches these command complete handlers to use the advertising
handle from the request/event, to ensure we will always use the correct
advertising handle regardless of the state of hdev->cur_adv_instance.
This change is tested on hatch and kefka chromebooks and run through
single- and multi-advertising automated tests to confirm callbacks
report tx power to the correct advertising handle, etc.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use the correct print format. Printing an unsigned int value should use %u
instead of %d. For details, please read document:
Documentation/core-api/printk-formats.rst
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The EDID had a few mistakes as reported by edid-decode:
Block 1, CTA-861 Extension Block:
Video Data Block: For improved preferred timing interoperability, set 'Native detailed modes' to 1.
Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.
Fixed those.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If some error occurs, URB buffers should also be freed. If they aren't
freed with the dvb here, the em28xx_dvb_fini call doesn't frees the URB
buffers as dvb is set to NULL. The function in which error occurs should
do all the cleanup for the allocations it had done.
Tested the patch with the reproducer provided by syzbot. This patch
fixes the memleak.
Reported-by: syzbot+889397c820fa56adf25d@syzkaller.appspotmail.com
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
change 'vodeo' to 'video'
change 'nevery' to 'never'
change 'is' to 'it'
change 'connevted' to 'connected'
change 'swichers' to 'switchers'
change 'strucure' to 'structure'
change 'unblanced' to 'unbalanced'
change 'fonctionality' to 'functionality'
Signed-off-by: Xiaofeng Cao <caoxiaofeng@yulong.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The EDID failed with two edid-decode warnings:
Block 1, CTA-861 Extension Block:
Video Data Block: VIC 16 is the preferred timing, overriding the first detailed timings. Is this intended?
Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.
In addition, the first DTD had a wrong vsync value (6 instead of 5).
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Trivial fixes for many kernel-doc warnings. Most of the comments before
enums or struct can just be that: regular comments.
So just change /** to /*.
In one remaining case it was just a wrong construct: @mem_dev[] -> @mem_dev
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the header argument is being passed by value, so a copy of 256
byte structure on the stack is potentially occurring. Fix this by passing
by reference to avoid any large stack copies.
Addresses-Coverity: ("Big parameter passed by value")
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a description for enum values in hantro_enc_fmt,
in order to fix these warnings:
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420P' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420SP' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUYV422' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_UYVY422' not described in enum 'hantro_enc_fmt'
While here, improve the kernel-doc style, adding an empty
line before the fields of the structs.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In case of error, the function device_link_add() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix to return negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modify the documentation to point out which flags and structs are
used to configure the statistics.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes these kernel-doc warnings:
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 've' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buf_count' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buf_mask' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'streaming' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'buffers' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:139: warning: Function parameter or member 'pixfmt' not described in 'fimc_is_video'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'src_fmt' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'sink_fmt' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-isp.h:176: warning: Function parameter or member 'subdev_lock' not described in 'fimc_isp'
drivers/media/platform/exynos4-is/fimc-lite.h:178: warning: Function parameter or member 'events' not described in 'fimc_lite'
drivers/media/platform/exynos4-is/fimc-lite.h:178: warning: Function parameter or member 'streaming' not described in 'fimc_lite'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'wbclk' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'fimc_lite' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'clk_provider' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'subdev_notifier' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'pipelines' not described in 'fimc_md'
drivers/media/platform/exynos4-is/media-dev.h:143: warning: Function parameter or member 'link_setup_graph' not described in 'fimc_md'
drivers/media/platform/exynos4-is/fimc-core.h:261: warning: Function parameter or member 'alpha' not described in 'fimc_frame'
drivers/media/platform/exynos4-is/fimc-core.h:321: warning: Function parameter or member 'streaming' not described in 'fimc_vid_cap'
drivers/media/platform/exynos4-is/fimc-core.h:429: warning: Function parameter or member 'drv_data' not described in 'fimc_dev'
drivers/media/platform/exynos4-is/fimc-core.h:495: warning: Function parameter or member 'in_order_1p' not described in 'fimc_ctx'
drivers/media/platform/exynos4-is/fimc-core.h:673: warning: Function parameter or member 'vid_cap' not described in 'fimc_active_queue_add'
drivers/media/platform/exynos4-is/fimc-core.h:685: warning: Function parameter or member 'vid_cap' not described in 'fimc_active_queue_pop'
drivers/media/platform/exynos4-is/fimc-core.h:700: warning: Function parameter or member 'vid_cap' not described in 'fimc_pending_queue_add'
drivers/media/platform/exynos4-is/fimc-core.h:711: warning: Function parameter or member 'vid_cap' not described in 'fimc_pending_queue_pop'
drivers/media/platform/exynos4-is/fimc-reg.h:333: warning: Function parameter or member 'dev' not described in 'fimc_hw_set_dma_seq'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes these kernel-doc warnings:
drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Enum value 'GSC_MIXER' not described in enum 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Enum value 'GSC_FIMD' not described in enum 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:76: warning: Excess enum value 'GSC_LOCAL' description in 'gsc_datapath'
drivers/media/platform/exynos-gsc/gsc-core.h:124: warning: Function parameter or member 'color' not described in 'gsc_fmt'
drivers/media/platform/exynos-gsc/gsc-core.h:124: warning: Function parameter or member 'num_comp' not described in 'gsc_fmt'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_min' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pix_align' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'in_buf_cnt' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'out_buf_cnt' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'sc_up_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'poly_sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'pre_sc_down_max' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:297: warning: Function parameter or member 'local_sc_down' not described in 'gsc_variant'
drivers/media/platform/exynos-gsc/gsc-core.h:310: warning: Function parameter or member 'clk_names' not described in 'gsc_driverdata'
drivers/media/platform/exynos-gsc/gsc-core.h:310: warning: Function parameter or member 'num_clocks' not described in 'gsc_driverdata'
drivers/media/platform/exynos-gsc/gsc-core.h:340: warning: Function parameter or member 'num_clocks' not described in 'gsc_dev'
drivers/media/platform/exynos-gsc/gsc-core.h:340: warning: Function parameter or member 'v4l2_dev' not described in 'gsc_dev'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'rotation' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'hflip' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'vflip' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'gsc_ctrls' not described in 'gsc_ctx'
drivers/media/platform/exynos-gsc/gsc-core.h:376: warning: Function parameter or member 'out_colorspace' not described in 'gsc_ctx'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes these warnings:
drivers/media/platform/s5p-jpeg/jpeg-core.h:136: warning: Function parameter or member 'irq_ret' not described in 's5p_jpeg'
drivers/media/platform/s5p-jpeg/jpeg-core.h:136: warning: Function parameter or member 'irq_status' not described in 's5p_jpeg'
drivers/media/platform/s5p-jpeg/jpeg-core.h:168: warning: Function parameter or member 'memplanes' not described in 's5p_jpeg_fmt'
drivers/media/platform/s5p-jpeg/jpeg-core.h:168: warning: Function parameter or member 'subsampling' not described in 's5p_jpeg_fmt'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes these warnings:
drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'pix_limits' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'has_img_effect' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:156: warning: Function parameter or member 'vp_offset' not described in 's3c_camif_variant'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'vdev' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'vb_queue' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:232: warning: Function parameter or member 'offset' not described in 'camif_vp'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_test_pattern' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_colorfx' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'ctrl_colorfx_cbcr' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx_cb' not described in 'camif_dev'
drivers/media/platform/s3c-camif/camif-core.h:297: warning: Function parameter or member 'colorfx_cr' not described in 'camif_dev'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Give typo in kernel-doc documentation: hdr -> hrd
Fixes this warning:
drivers/media/platform/allegro-dvt/nal-h264.h:33: warning: expecting prototype for struct nal_h264_hdr_parameters. Prototype was for struct
nal_h264_hrd_parameters instead
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a helper to update SGX_LEPUBKEYHASHn MSRs. SGX virtualization also
needs to update those MSRs based on guest's "virtual" SGX_LEPUBKEYHASHn
before EINIT from guest.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/dfb7cd39d4dd62ea27703b64afdd8bccb579f623.1616136308.git.kai.huang@intel.com
Add a helper to extract the fault indicator from an encoded ENCLS return
value. SGX virtualization will also need to detect ENCLS faults.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/c1f955898110de2f669da536fc6cf62e003dff88.1616136308.git.kai.huang@intel.com
Define the ENCLS leafs that are available with SGX2, also referred to as
Enclave Dynamic Memory Management (EDMM). The leafs will be used by KVM
to conditionally expose SGX2 capabilities to guests.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/5f0970c251ebcc6d5add132f0d750cc753b7060f.1616136308.git.kai.huang@intel.com
Move the ENCLS leaf definitions to sgx.h so that they can be used by
KVM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/2e6cd7c5c1ced620cfcd292c3c6c382827fde6b2.1616136308.git.kai.huang@intel.com
Expose SGX architectural structures, as KVM will use many of the
architectural constants and structs to virtualize SGX.
Name the new header file as asm/sgx.h, rather than asm/sgx_arch.h, to
have single header to provide SGX facilities to share with other kernel
componments. Also update MAINTAINERS to include asm/sgx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/6bf47acd91ab4d709e66ad1692c7803e4c9063a0.1616136308.git.kai.huang@intel.com
Modify sgx_init() to always try to initialize the virtual EPC driver,
even if the SGX driver is disabled. The SGX driver might be disabled
if SGX Launch Control is in locked mode, or not supported in the
hardware at all. This allows (non-Linux) guests that support non-LC
configurations to use SGX.
[ bp: De-silli-fy the test. ]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/d35d17a02bbf8feef83a536cec8b43746d4ea557.1616136308.git.kai.huang@intel.com