This patch simply fixes a bunch of function parameter comments
in dir.c that were reported by the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The only glock that uses go_xmote_bh glops function is the freeze glock
which uses freeze_go_xmote_bh. It does not use its gh parameter, so
this patch eliminates the unneeded parameter.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_getbuf would create empty buffers when
it was given the NO_CREATE directive from gfs2_journal_wipe. This is a
waste of time: the buffer_head is only used by gfs2_remove_from_journal
to determine if the buffer is pinned (which it won't be if it's newly
created) and if there's an associated bd element (same story).
This patch removes the useless buffer assignment.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
I have a handful of fixes for 5.12:
* A fix for a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
* A fix to put_user() that ensures the value to be written is evaluated
before enabling access to userspace memory..
* A fix to align the exception vector table correctly, so we don't rely
on the firmware's handling of unaligned accesses.
* A build fix to make NUMA depend on MMU, which triggers some
randconfigs.
-----BEGIN PGP SIGNATURE-----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=DUBG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:
- fix a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
- ensure the value to be written by put_user() is evaluated before
enabling access to userspace memory..
- align the exception vector table correctly, so we don't rely on the
firmware's handling of unaligned accesses.
- build fix to make NUMA depend on MMU, which triggered on some
randconfigs"
* tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Make NUMA depend on MMU
riscv: remove unneeded semicolon
riscv,entry: fix misaligned base for excp_vect_table
riscv: evaluate put_user() arg before enabling user access
riscv: Drop const annotation for sp
Since 4f16d25c68 ("netfilter: nftables: add nft_parse_register_load()
and use it") and 345023b0db ("netfilter: nftables: add
nft_parse_register_store() and use it"), the following functions are not
exported symbols anymore:
- nft_parse_register()
- nft_validate_register_load()
- nft_validate_register_store()
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The first argument of a WARN_ONCE() is a condition. This WARN_ONCE()
will only print the table name, and is potentially problematic if the
table name has a %s in it.
Fixes: c520292f29 ("audit: log nftables configuration change events once per table")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This causes dmesg spew during normal operation, so remove this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Julian Anastasov <ja@ssi.bg>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix a bug on pseries where spurious wakeups from H_PROD would prevent partition migration
from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the percpu mapping causing
us to corrupt the protection key used for the mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, Nathan Lynch.
-----BEGIN PGP SIGNATURE-----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=booR
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a bug on pseries where spurious wakeups from H_PROD would prevent
partition migration from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the
percpu mapping causing us to corrupt the protection key used for the
mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch"
* tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT
powerpc/pseries/mobility: handle premature return from H_JOIN
powerpc/pseries/mobility: use struct for shared state
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmBnkEUTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXv4YCADaSmGXyyLdoZQ5dH0oiWdt76aLNnuK
ckBDoiLWYkwOHQndqeQhsIxKBO+wEASSpua0fv1idewAk8zhw553IjCh2KZbtvzA
Mev5WwotBZnY2Hl1jdByqkZ/PS/Kms58qlvW4rcgg831DNLYGvc3soRiQy81GdIv
MVFJFFrZB4QsWcsjEGoN7ZUprG66dRixIBl5r/f426zRcpA/OlIEEKp0zRwYgyJL
rSfpxDAquEUsLgWC01y8g3ZBlpto63ZS28UPPC9McgEW+SK4+OOmMZu7t/ob2wyt
RopbX/meoPitMeruZy3z/jbUezW7Celz3dG2diL3WCX20HHjOmTjm6CM
=rax+
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
"One fix from Lu Yunlong for a double free in hvfb_probe"
* tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
video: hyperv_fb: Fix a double free in hvfb_probe
Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymgSACeJYD1EfjFSCB0gEmdjU261rWOcT0AoLTRkJW1
vywQNi5XNrbbmsWpxLsF
=wG2r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: clear deferred probe reason on probe retry
Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhGNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylNFgCfRDpMVRjtAhrrdlTJaQRSXqd2vKAAn3Z08ggH
pvXxXEAF4NfSfuWcRehT
=kJts
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
mei: allow map and unmap of client dma buffer only for disconnected client
MAINTAINERS: Add linux-phy list and patchwork
interconnect: Fix kerneldoc warning
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
extcon: Fix error handling in extcon_dev_register
extcon: Add stubs for extcon_register_notifier_all() functions
interconnect: core: fix error return code of icc_link_destroy()
interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
Here are 2 rtl8192e staging driver fixes for reported problems. Both of
these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhHAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymeSQCg17KEmaRb10fxsb0GU/HxDbj3X2AAoIfLAeus
IDAfiYM/r8I1MXK3M0eI
=as4K
-----END PGP SIGNATURE-----
Merge tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two rtl8192e staging driver fixes for reported problems.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: Change state information from u16 to u8
staging: rtl8192e: Fix incorrect source in memcpy()
Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhHew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOQCgwM7aKSHU9MuRiyU8jVk1qEEwfHgAn3YcQ6bY
2IWKKJ4MUo2Iks/+2HS7
=oGYE
-----END PGP SIGNATURE-----
Merge tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues"
* tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
soc: qcom-geni-se: Cleanup the code to remove proxy votes
Here are a few small USB driver fixes for 5.12-rc6 to resolve reported
problems.
They include:
- a number of cdc-acm fixes for reported problems. It seems
more people are using this driver lately...
- dwc3 driver fixes for reported problems, and fixes for the
fixes :)
- dwc2 driver fixes for reported issues.
- musb driver fix.
- new USB quirk additions.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhIJQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykdtgCg2cYTu8JGffixl0trMkqRI23AC5wAnAz7Sm+k
jcQbXq0ErUypFqZQrMLb
=UyXV
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few small USB driver fixes for 5.12-rc6 to resolve reported
problems.
They include:
- a number of cdc-acm fixes for reported problems. It seems more
people are using this driver lately...
- dwc3 driver fixes for reported problems, and fixes for the fixes :)
- dwc2 driver fixes for reported issues.
- musb driver fix.
- new USB quirk additions.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (23 commits)
usb: dwc2: Prevent core suspend when port connection flag is 0
usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.
usb: musb: Fix suspend with devices connected for a64
usb: xhci-mtk: fix broken streams issue on 0.96 xHCI
usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable
usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()
USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem
USB: cdc-acm: do not log successful probe on later errors
USB: cdc-acm: always claim data interface
USB: cdc-acm: use negation for NULL checks
USB: cdc-acm: clean up probe error labels
USB: cdc-acm: drop redundant driver-data reset
USB: cdc-acm: drop redundant driver-data assignment
USB: cdc-acm: fix use-after-free after probe failure
USB: cdc-acm: fix double free on probe failure
USB: cdc-acm: downgrade message to debug
USB: cdc-acm: untangle a circular dependency between callback and softint
cdc-acm: fix BREAK rx code path adding necessary calls
usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference
usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield
...
The tracing test and the recent kfunc call test require
CONFIG_DYNAMIC_FTRACE. This patch adds it to the config file.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210403002921.3419721-1-kafai@fb.com
Single fix to iscsi for a rare race condition which can cause a kernel
panic.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYGe3ZCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaxZAQDt/zcv
xvK+2qWNsqVse32hknc3RpdMWUh4JE1pKfSvgwD/X7c3goqQ8dEyEK0cpXLNpw9D
kOOQxTVVCxFImwActdg=
=VlUo
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix to iscsi for a rare race condition which can cause a
kernel panic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix race condition between login and sync thread
Convert powerpc to relative jump labels.
Before the patch, pseries_defconfig vmlinux.o has:
9074 __jump_table 0003f2a0 0000000000000000 0000000000000000 01321fa8 2**0
With the patch, the same config gets:
9074 __jump_table 0002a0e0 0000000000000000 0000000000000000 01321fb4 2**0
Size is 258720 without the patch, 172256 with the patch.
That's a 33% size reduction.
Largely copied from commit c296146c05 ("arm64/kernel: jump_label:
Switch to relative references")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/828348da7868eda953ce023994404dfc49603b64.1616514473.git.christophe.leroy@csgroup.eu
Implement Extended Berkeley Packet Filter on Powerpc 32
Test result with test_bpf module:
test_bpf: Summary: 378 PASSED, 0 FAILED, [354/366 JIT'ed]
Registers mapping:
[BPF_REG_0] = r11-r12
/* function arguments */
[BPF_REG_1] = r3-r4
[BPF_REG_2] = r5-r6
[BPF_REG_3] = r7-r8
[BPF_REG_4] = r9-r10
[BPF_REG_5] = r21-r22 (Args 9 and 10 come in via the stack)
/* non volatile registers */
[BPF_REG_6] = r23-r24
[BPF_REG_7] = r25-r26
[BPF_REG_8] = r27-r28
[BPF_REG_9] = r29-r30
/* frame pointer aka BPF_REG_10 */
[BPF_REG_FP] = r17-r18
/* eBPF jit internal registers */
[BPF_REG_AX] = r19-r20
[TMP_REG] = r31
As PPC32 doesn't have a redzone in the stack, a stack frame must always
be set in order to host at least the tail count counter.
The stack frame remains for tail calls, it is set by the first callee
and freed by the last callee.
r0 is used as temporary register as much as possible. It is referenced
directly in the code in order to avoid misusing it, because some
instructions interpret it as value 0 instead of register r0
(ex: addi, addis, stw, lwz, ...)
The following operations are not implemented:
case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
case BPF_STX | BPF_XADD | BPF_DW: /* *(u64 *)(dst + off) += src */
The following operations are only implemented for power of two constants:
case BPF_ALU64 | BPF_MOD | BPF_K: /* dst %= imm */
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/61d8b149176ddf99e7d5cef0b6dc1598583ca202.1616430991.git.christophe.leroy@csgroup.eu
The following opcodes will be needed for the implementation
of eBPF for PPC32. Add them in asm/ppc-opcode.h
PPC_RAW_ADDE
PPC_RAW_ADDZE
PPC_RAW_ADDME
PPC_RAW_MFLR
PPC_RAW_ADDIC
PPC_RAW_ADDIC_DOT
PPC_RAW_SUBFC
PPC_RAW_SUBFE
PPC_RAW_SUBFIC
PPC_RAW_SUBFZE
PPC_RAW_ANDIS
PPC_RAW_NOR
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7bd573a368edd78006f8a5af508c726e7ce1ed2.1616430991.git.christophe.leroy@csgroup.eu
In preparation of using user_access_begin/end in restore_user_regs(),
move the access_ok() inside the function.
It makes no difference as the behaviour on a failed access_ok() is
the same as on failed restore_user_regs().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c106eb2f37c3040f1fd38b40e50c670feb7cb835.1616151715.git.christophe.leroy@csgroup.eu
In the same spirit as commit f1cf4f93de ("powerpc/signal32: Remove
ifdefery in middle of if/else")
MSR_TM_ACTIVE() is always defined and returns always 0 when
CONFIG_PPC_TRANSACTIONAL_MEM is not selected, so the awful
ifdefery in the middle of an if/else can be removed.
Make 'msr_hi' a 'long long' to avoid build failure on PPC32
due to the 32 bits left shift.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a4b48b2f0be1ef13fc8e57452b7f8350da28d521.1616151715.git.christophe.leroy@csgroup.eu
Convention is to prefix functions with __unsafe_ instead of
suffixing it with _unsafe.
Rename save_user_regs_unsafe() and save_general_regs_unsafe()
accordingly, that is respectively __unsafe_save_general_regs() and
__unsafe_save_user_regs().
Suggested-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8cef43607e5b35a7fd0829dec812d88beb570df2.1616151715.git.christophe.leroy@csgroup.eu
Similarly to commit 5cf773fc8f37 ("powerpc/uaccess: Also perform
64 bits copies in unsafe_copy_to_user() on ppc32")
ppc32 has an efficiant 64 bits unsafe_get_user(), so also use it in
order to unroll loops more.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/308e65d9237a14e8c0e3b22919fcf0b5e5592608.1616151715.git.christophe.leroy@csgroup.eu
In the same way as commit 14026b94cc ("signal: Add
unsafe_put_compat_sigset()"), this time add
unsafe_get_compat_sigset() macro which is the 'unsafe'
version of get_compat_sigset()
For the bigendian, use unsafe_get_user() directly
to avoid intermediate copy through the stack.
For the littleendian, use a straight unsafe_copy_from_user().
This commit adds the generic fallback for unsafe_copy_from_user().
Architectures wanting to use unsafe_get_compat_sigset() have to
make sure they have their own unsafe_copy_from_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b05bf434ee13c76bc9df5f02653a10db5e7b54e5.1616151715.git.christophe.leroy@csgroup.eu
clang 11 and future GCC are supporting asm goto with outputs.
Use it to implement get_user in order to get better generated code.
Note that clang requires to set x in the default branch of
__get_user_size_goto() otherwise is compliant about x not being
initialised :puzzled:
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/403745b5aaa1b315bb4e8e46c1ba949e77eecec0.1615398265.git.christophe.leroy@csgroup.eu
Make get_user() do the access_ok() check then call __get_user().
Make put_user() do the access_ok() check then call __put_user().
Then embed __get_user_size() and __put_user_size() in
__get_user() and __put_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eebc554f6a81f570c46ea3551000ff5b886e4faa.1615398265.git.christophe.leroy@csgroup.eu
__get_user_bad() and __put_user_bad() are functions that are
declared but not defined, in order to make the link fail in
case they are called.
Nowadays, we have BUILD_BUG() and BUILD_BUG_ON() for that, and
they have the advantage to break the build earlier as it breaks
it at compile time instead of link time.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d7d839e994f49fae4ff7b70fac72bd951272436b.1615398265.git.christophe.leroy@csgroup.eu
Commit d02f6b7dab ("powerpc/uaccess: Evaluate macro arguments once,
before user access is allowed") changed the __chk_user_ptr()
argument from the passed ptr pointer to the locally
declared __gu_addr. But __gu_addr is locally defined as __user
so the check is pointless.
During kernel build __chk_user_ptr() voids and is only evaluated
during sparse checks so it should have been armless to leave the
original pointer check there.
Nevertheless, this check is indeed redundant with the assignment
above which casts the ptr pointer to the local __user __gu_addr.
In case of mismatch, sparse will detect it there, so the
__check_user_ptr() is not needed anywhere else than in access_ok().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/69f17d75046733b891ab2e668dbf464787cdf598.1615398265.git.christophe.leroy@csgroup.eu
__unsafe_put_user_goto() is just an intermediate layer to
__put_user_size_goto() without added value other than doing
the __user pointer type checking.
Do the __user pointer type checking in __put_user_size_goto()
and remove __unsafe_put_user_goto().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b6552149209aebd887a6977272b06a41256bdb9f.1615398265.git.christophe.leroy@csgroup.eu
Commit 6bfd93c32a ("powerpc: Fix incorrect might_sleep in
__get_user/__put_user on kernel addresses") added a check to not call
might_sleep() on kernel addresses. This was to enable the use of
__get_user() in the alignment exception handler for any address.
Then commit 95156f0051 ("lockdep, mm: fix might_fault() annotation")
added a check of the address space in might_fault(), based on
set_fs() logic. But this didn't solve the powerpc alignment exception
case as it didn't call set_fs(KERNEL_DS).
Nowadays, set_fs() is gone, previous patch fixed the alignment
exception handler and __get_user/__put_user are not supposed to be
used anymore to read kernel memory.
Therefore the is_kernel_addr() check has become useless and can be
removed.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e0a980a4dc7a2551183dd5cb30f46eafdbee390c.1615398265.git.christophe.leroy@csgroup.eu
In the old days, when we didn't have kernel userspace access
protection and had set_fs(), it was wise to use __get_user()
and friends to read kernel memory.
Nowadays, get_user() is granting userspace access and is exclusively
for userspace access.
In alignment exception handler, use probe_kernel_read_inst()
instead of __get_user_instr() for reading instructions in kernel.
This will allow to remove the is_kernel_addr() check in
__get/put_user() in a following patch.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d9ecbce00178484e66ca7adec2ff210058037704.1615398265.git.christophe.leroy@csgroup.eu
Powerpc is the only architecture having _inatomic variants of
__get_user() and __put_user() accessors. They were introduced
by commit e68c825bb0 ("[POWERPC] Add inatomic versions of __get_user
and __put_user").
Those variants expand to the _nosleep macros instead of expanding
to the _nocheck macros. The only difference between the _nocheck
and the _nosleep macros is the call to might_fault().
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), __get/put_user() can be used in atomic parts
of the code, therefore __get/put_user_inatomic() have become useless.
Remove __get_user_inatomic() and __put_user_inatomic().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e5c895669e8d54a7810b62dc61eb111f33c2c37.1615398265.git.christophe.leroy@csgroup.eu
This patch converts emulate_spe() to using user_access_begin
logic.
Since commit 662bbcb274 ("mm, sched: Allow uaccess in atomic with
pagefault_disable()"), might_fault() doesn't fire when called from
sections where pagefaults are disabled, which must be the case
when using _inatomic variants of __get_user and __put_user. So
the might_fault() in user_access_begin() is not a problem.
There was a verification of user_mode() together with the access_ok(),
but there is a second verification of user_mode() just after, that
leads to immediate return. The access_ok() is now part of the
user_access_begin which is called after that other user_mode()
verification, so no need to check user_mode() again.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c95a648fdf75992c9d88f3c73cc23e7537fcf2ad.1615555354.git.christophe.leroy@csgroup.eu