Test that two sampling rules cannot be configured on the same port with
the same trigger.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The per-port sampling triggers (i.e., ingress / egress) cannot be
enabled twice. Meaning, the below configuration will not result in
packets being sampled twice:
# tc filter add dev swp1 ingress matchall skip_sw action sample rate 100 group 1
# tc filter add dev swp1 ingress matchall skip_sw action sample rate 100 group 1
Therefore, reject such configurations.
Fixes: 90f53c53ec ("mlxsw: spectrum: Start using sampling triggers hash table")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can only offload matchall rules that do not match on a
protocol. Test that matchall rules that match on a protocol are vetoed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perform the priority check earlier in the function instead of repeating
it for every action. This fixes a bug that allowed matchall rules with
sample action to be added in front of flower rules on egress.
Fixes: 54d0e963f6 ("mlxsw: spectrum_matchall: Add support for egress sampling")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous patch moved the protocol check out of the action check, so
these if statements can now be converted to a switch statement. Perform
the conversion.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Perform the protocol check earlier in the function instead of repeating
it for every action. Example:
# tc filter add dev swp1 ingress proto ip matchall skip_sw action sample group 1 rate 100
Error: matchall rules only supported with 'all' protocol.
We have an error talking to the kernel
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmBhh4cTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqT0uCACG3TrFXLFVo3VB+EaMKttdjD+KlfnA
zABhon47XEHuNaxfYRy9BUjwbz3ig6e0qYd3I23G02dQaLTFyoQmx5msquVS1LoW
3H4D+VtWNdOspJn3N/cG+JJmPeZRON40EzFRFgKElg+IhanuxOox5IVtt68azNaj
Kpx9+dlLla26P1xIFnrppfs0V19fHcr9nM1c+u5s2c1kuQyHgI2gNqZL6Ot+uGVv
YyqQKQCQagXpTIM7Z1DC8ehclhpJABkwzQxWb8C6O6fldV3PVaJ8G9QXdjtCX/Jh
4ZJR7LDFMQBIcUrQycyxw9rpIlyLGbIdgCSShcCDZMJE0xYsV19RbgUs
=Ru5R
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.12-20210329' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-03-29
this is a pull request of 3 patches for net/master.
The two patch are by Oliver Hartkopp. He fixes length check in the
proto_ops::getname callback for the CAN RAW, BCM and ISOTP protocols,
which were broken by the introduction of the J1939 protocol.
The last patch is by me and fixes the a BUILD_BUG_ON() check which
triggers on ARCH=arm with CONFIG_AEABI unset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: spectrum: Fix ECN marking in tunnel decapsulation
Patch #1 fixes a discrepancy between the software and hardware data
paths with regards to ECN marking after decapsulation. See the changelog
for a detailed description.
Patch #2 extends the ECN decap test to cover all possible combinations
of inner and outer ECN markings. The test passes over both data paths.
v2:
* Only set ECT(1) if inner is ECT(0)
* Introduce a new helper to determine inner ECN. Share it between NVE
and IP-in-IP tunnels
* Extend the selftest
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that all possible combinations of inner and outer ECN bits result
in the correct inner ECN marking according to RFC 6040 4.2.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit changed the behavior of the software data path with regards
to the ECN marking of decapsulated packets. However, the commit did not
change other callers of __INET_ECN_decapsulate(), namely mlxsw. The
driver is using the function in order to ensure that the hardware and
software data paths act the same with regards to the ECN marking of
decapsulated packets.
The discrepancy was uncovered by commit 5aa3c334a4 ("selftests:
forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value") that
aligned the selftest to the new behavior. Without this patch the
selftest passes when used with veth pairs, but fails when used with
mlxsw netdevs.
Fix this by instructing the device to propagate the ECT(1) mark from the
outer header to the inner header when the inner header is ECT(0), for
both NVE and IP-in-IP tunnels.
A helper is added in order not to duplicate the code between both tunnel
types.
Fixes: b723748750 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Weihang Li says:
====================
net: marvell: fix some coding style
Do some cleanups according to the coding style of kernel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use tab instead of space to align the code.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just delete three extra spaces.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a trailing */ on a separate line for block comments.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Delete duplicate word in two comments.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: misc updates for -next
This series include some updates for the HNS3 ethernet driver.
flow director configuration").
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_put_padto() may fails because of memory failure, sw_err_cnt
is already used to log memory failure in hns3_skb_linearize(),
so use it to log the memory failure for skb_put_padto() too.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device HNAE3_DEVICE_VERSION_V3 supports up to 1280 queues
and qsets for one function, so the bitwidth of tc_offset, meaning
the tqps index, needs to expand from 10 bits to 11 bits.
The device HNAE3_DEVICE_VERSION_V3 supports up to 512 queues on
one TC. The tc_size, meaning the exponent with base 2 of queues
supported on TC, which needs to expand from 3 bits to 4 bits.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The actual size on wire for tso skb should be (gso_segs - 1) *
hdr + skb->len instead of skb->len, which can be seen by user using
'ethtool -S ethX' cmd, and 'Byte Queue Limit' also use the send size
stat to do the queue limiting, so add send_bytes in the desc_cb to
record the actual send size for a skb. And send_bytes is only for tx
desc_cb and page_offset is only for rx desc, so reuse the same space
for both of them.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently hns3 driver only handle the xmit skb with one level of
fraglist skb, add handling for multi level by calling hns3_tx_bd_num()
recursively when calculating bd num and calling hns3_fill_skb_to_desc()
recursively when filling tx desc.
When the skb has a fraglist level of 24, the skb is simply dropped and
stats.max_recursion_level is added to record the error. Move the stat
handling from hns3_nic_net_xmit() to hns3_nic_maybe_stop_tx() in order
to handle different error stat and add the 'max_recursion_level' and
'hw_limitation' stat.
Note that the max recursive level as 24 is chose according to below:
commit 48a1df6533 ("skbuff: return -EMSGSIZE in skb_to_sgvec to
prevent overflow").
And that we are not able to find a testcase to verify the recursive
fraglist case, so Fixes tag is not provided.
Reported-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the queue reset process needs to be performed one by
one, which is inefficient. However, the queue reset of the same
function is always performed at the same time. Therefore, according
to the UM, command HCLGE_OPC_CFG_RST_TRIGGER can be used to reset
all queues of the same function at a time, in order to optimize
the queue reset process.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if user hasn't change channel number, the rss_size
is limited to be no more than the vector number, in order to
keep one vector only being mapped to one queue. But the queue
number of each tc can be different, and one vector also can
be mapped by multiple queues. So remove this limitation.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The array size of bd_num_list is a fixed value, it may have potential
overflow risk when array size of hclge_dfx_bd_offset_list is greater
than that fixed value. So modify bd_num_list as a pointer and allocate
memory for it according to array size of hclge_dfx_bd_offset_list.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When new rule state is TO_ADD or ACTIVE, and there is already a
rule with same location in the fd_rule_list, the new rule will
be freed after modifying the old rule. It may cause user-after-free
issue when access rule again in hclge_add_fd_entry_common().
Fixes: fc4243b8de ("net: hns3: refactor flow director configuration")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when adding flow director rule, it missed to set
rule state. Which may cause the rule state in software is
unconsistent with hardware.
Fixes: fc4243b8de ("net: hns3: refactor flow director configuration")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.
The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.
v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com
Always use the modified copy of the intel_remapped_plane_info variables.
An upcoming patch updates the dst_stride field in these copies after
which we can't use the original versions.
v2: Init view in igt_vma_rotate_remap() when declaring it. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-22-imre.deak@intel.com
Save some place in the GTT VMAs by using a u16 instead of unsigned int
to store the view dimensions. The maximum FB stride is 256kB which is
4096 tiles in the worst case (yf-tiles), the maximum FB height is 16k
pixels, which is 16384 tiles in the worst case (linear 4x1 tiled FB).
v2:
- Fix worst case tile height formula in commit log. (Ville)
- Add an assign_chk_ovf helper to simplify the related assignments.
v3:
- Enclose params of the assign_chk_ovf macro in parentheses.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-21-imre.deak@intel.com
Factor out to a new function the logic to calculate the FB remapping
parameters both during creating the FB and when flipping to it.
v2:
- Keep stride next to offset calculation. (Ville)
- Enclose check_array_bounds macro arguments in parentheses.
v3:
- Rebase on top of the struct intel_fb_view refactoring.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-20-imre.deak@intel.com
Instead of copying separately the GTT remapped and color plane view info
from the FB to the plane state, do this by copying the whole
intel_fb_view struct. For this we make sure the FB view state is fully
inited (that is also including the view type) already during FB
creation, so this init is not required during atomic check time. This
also means the we don't need to reset the unused color plane info during
atomic check, as these are already reset during FB creation.
I noticed that initial FBs will only work atm if they are page aligned
(which BIOS most probably always ensures), but add a comment to sanitize
this part once. Also we won't disable the plane if
get_initial_plane_config() failed for some reason (for instance due to
unsupported rotation), add a TODO: comment for this too.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-19-imre.deak@intel.com
Instead of special casing getting the pitch for the normal view, store
it during FB creation to the FB normal view struct and retrieve it from
there during atomic check, as it's done for the rotated view. A
follow-up patch does the same for a new FB remapped view.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-18-imre.deak@intel.com
To allow the simplification of FB/plane view computation in the
follow-up patches, unify the corresponding state in the
intel_framebuffer and intel_plane_state structs into a new intel_fb_view
struct.
This adds some overhead to intel_framebuffer as the rotated view will
have now space for 4 color planes instead of the required 2 and it'll
also contain the unused offset for each color_plane info. Imo this is an
acceptable trade-off to get a simplified way of the remap computation.
Use the new intel_fb_view struct for the FB normal view as well, so (in
the follow-up patches) we can remove the special casing for normal view
calculation wrt. the calculation of remapped/rotated views. This also
adds an overhead to the intel_framebuffer struct, as the gtt remap info
and per-color plane offset/pitch is not required for the normal view,
but imo this is an acceptable trade-off as above. The per-color plane
pitch filed will be used by a follow-up patch, so we can retrieve the
pitch for each view in the same way.
No functional changes in this patch.
v2:
- Make the patch have _no functional change_.
(fix skl_check_nv12_aux_surface() and skl_check_main_surface()).
- s/i915_color_plane_view::pitch/stride/ (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-17-imre.deak@intel.com
Factor out to a new function the logic to calculate an FB plane's
normal-view size.
Instead of using intel_remapped_plane_info, which is related only to
remapping, add a helper to get the tile pitch and rows for an FB plane,
so these helpers can be used both by the normal size calculation and the
remapping code.
Also add a new fb_plane_view_dims struct in which we can pass around the
view (either FB plane or plane source) and tile dimensions conveniently
to functions calculating further view parameters.
v2:
- Add back the +1 tile adjustment for x!=0 in calc_plane_normal_size(). (Ville)
- s/pages/tiles/ in calc_plane_normal_size(). (Ville)
- Add a helper for the plane view width calculation. (Ville)
- Return tiles as unsigned int from calc_plane_normal_size().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-16-imre.deak@intel.com
Factor out to a new function the logic to convert the FB plane x/y
values to a tile size based offset and new x/y relative to this offset.
This makes intel_fill_fb_info() and intel_plane_remap_gtt() somewhat
more readable.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-15-imre.deak@intel.com
Factor out to a new function the logic to convert the FB plane offset to
x/y and check the validity of x/y, with the goal to make
intel_fill_fb_info() more readable.
v2: Use &fb->base instead of a drm_fb alias. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-14-imre.deak@intel.com
Move the FB plane specific functions from intel_display.c to intel_fb.c.
There's more functions like this, but I leave moving those as well for a
follow up, and for now moving only the ones needed by the end of this
patchset (adding support for padding tile-rows in an FB GGTT view).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-11-imre.deak@intel.com
This probably doesn't cause an issue, since the code checks the view
type dependent size of the views before comparing them, but let's follow
the practice to bzero the whole struct when initializing it.
v2: Use {} instead of { } struct intializer. (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-6-imre.deak@intel.com
This probably doesn't cause an issue, since the code checks the view
type dependent size of the views before comparing them, but let's follow
the practice to bzero the whole struct when initializing it.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-5-imre.deak@intel.com