amd-drm-next-5.13-2021-03-23:
amdgpu:
- Debugfs cleanup
- Various cleanups and spelling fixes
- Flexible array cleanups
- Initial AMD Freesync HDMI
- Display fixes
- 10bpc dithering improvements
- Display ASSR support
- Clean up and unify powerplay and swsmu interfaces
- Vangogh fixes
- Add SMU gfx busy queues for RV/PCO
- PCIE DPM fixes
- S0ix fixes
- GPU metrics data fixes
- DCN secure display support
- Backlight type override
- Add initial support for Aldebaran
- RAS fixes
- Prime fixes for A+A systems
- Reset fixes
- Initial resource cursor support
- Drop legacy IO BAR requirements
- Various power fixes
amdkfd:
- MMU notifier fixes
- APU fixes
radeon:
- Debugfs cleanups
- Flexible array cleanups
UAPI:
- amdgpu: Add a new INFO ioctl interface to query video capabilities
rather than hardcoding them in userspace. This allows us to provide
fine grained asic capabilities (e.g., if a particular part is
bandwidth limited, we can limit the capabilities). Proposed userspace:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_capshttps://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
- amdkfd: bump the driver version. There was a problem with reporting
some RAS features on older versions of the driver. Proposed userspace:
7cdd63475c
Danvet: A bunch of conflicts all over, but it seems to compile ... I
did put the call to dc_allow_idle_optimizations() on a single line
since it looked a bit too jarring to be left alone.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com
Initial drop action support missed that drop action can be added to egress
flow tables as well. Add the missing support.
This requires making sure that dest_type isn't set to PORT which in turn
exposes a possibility of passing dst while indicating number of dsts as
zero. Explicitly check for number of dsts and pass the appropriate
pointer.
Fixes: f29de9eee7 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20210318135123.680759-1-leon@kernel.org
Reviewed-by: Mark Bloch <markb@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Success is returned in the following flows:
* New mode is the same as the current one.
* Switched to new mode and there are no bound counters yet.
Link: https://lore.kernel.org/r/20210318110502.673676-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The commit 6d0c5de2fd
("power: supply: Clean-up few drivers by using managed work init")
Re-introduced wrong order of initializing work-queue and requesting
the IRQs which was originally fixed by the commit b5e8642ed9
("power: supply: axp20x_usb_power: Init work before enabling IRQs")
In addition this caused the work queue to be initialized twice.
Fix it again.
Fixes: 6d0c5de2fd ("power: supply: Clean-up few drivers by using managed work init")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reported-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/a774ca25010b7c932c07f22ce8a548466705c023.1616574973.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a UART driver for the new Broadcom 8250 based STB UART. The new
UART is backward compatible with the standard 8250, but has some
additional features. The new features include a high accuracy baud
rate clock system and DMA support.
The driver will use the new optional BAUD MUX clock to select the best
one of the four master clocks (81MHz, 108MHz, 64MHz and 48MHz) to feed
the baud rate selection logic for any requested baud rate. This allows
for more accurate BAUD rates when high speed baud rates are selected.
The driver will use the new UART DMA hardware if the UART DMA registers
are specified in Device Tree "reg" property.
The driver also sets the UPSTAT_AUTOCTS flag when hardware flow control
is enabled. This flag is needed for UARTs that don't assert a CTS
changed interrupt when CTS changes and AFE (Hardware Flow Control) is
enabled.
The driver also contains a workaround for a bug in the Synopsis 8250
core. The problem is that at high baud rates, the RX partial FIFO
timeout interrupt can occur but there is no RX data (DR not set in
the LSR register). In this case the driver will not read the Receive
Buffer Register, which clears the interrupt, and the system will get
continuous UART interrupts until the next RX character arrives. The
fix originally suggested by Synopsis was to read the Receive Buffer
Register and discard the character when the DR bit in the LSR was
not set, to clear the interrupt. The problem was that occasionally
a character would arrive just after the DR bit check and a valid
character would be discarded. The fix that was added will clear
receive interrupts to stop the interrupt, deassert RTS to insure
that no new data can arrive, wait for 1.5 character times for the
sender to react to RTS and then check for data and either do a dummy
read or a valid read. Debugfs error counters were also added and were
used to help create test software that would cause the error condition.
The counters can be found at:
/sys/kernel/debug/bcm7271-uart/<device-name>/stats
This also includes a few fixes for build warnings reported by
the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20210325185256.16156-3-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add DT bindings for the Broadcom 8250 based UART driver. This
UART is based on an 8250 but adds additional functionality. The
additional features include the ability to use DMA for transfers and
a baud rate clock system that is more accurate at high baud rates.
This UART is backward compatible with the standard 8250 UART.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20210325185256.16156-2-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 048eb908a1 ("soc: qcom-geni-se: Add interconnect
support to fix earlycon crash")
ICC core and platforms drivers supports sync_state feature, which
ensures that the default ICC BW votes from the bootloader is not
removed until all it's consumers are probes.
The proxy votes were needed in case other QUP child drivers
I2C, SPI probes before UART, they can turn off the QUP-CORE clock
which is shared resources for all QUP driver, this causes unclocked
access to HW from earlycon.
Given above support from ICC there is no longer need to maintain
proxy votes on QUP-CORE ICC node from QUP wrapper driver for early
console usecase, the default votes won't be removed until real
console is probed.
Cc: stable@vger.kernel.org
Fixes: 266cd33b59 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced")
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210324101836.25272-2-rojay@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When NETLOGIC_XLR_NET is enabled, and NETDEVICES is
disabled, Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for PHYLIB
Depends on [n]: NETDEVICES [=n]
Selected by [y]:
- NETLOGIC_XLR_NET [=y] && STAGING [=y] && CPU_XLR [=y]
This is because NETLOGIC_XLR_NET selects PHYLIB
without selecting or depending on NETDEVICES,
despite PHYLIB depending on NETDEVICES.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20210326054533.48751-1-julianbraha@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix the following checkpatch warning:
ERROR: do not use assignment in if condition
2607: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:2607:
+ if (0 != (ret = rtw_change_ifname(padapter, new_ifname)))
--
ERROR: do not use assignment in if condition
4239: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:4239:
+ if (!(ext = vmalloc(len)))
--
ERROR: do not use assignment in if condition
4253: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c:4253:
+ if (!(ext_dbg = vmalloc(len))) {
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/98b58790ae7c791d091b301bccf67a70c41ec599.1616600897.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix the following checkpatch warning:
ERROR: do not use assignment in if condition
1440: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:1440:
+ if ((wps_ie = rtw_get_wps_ie(buf, len, NULL, &wps_ielen)))
--
ERROR: do not use assignment in if condition
2465: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2465:
+ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL)
--
ERROR: do not use assignment in if condition
2937: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2937:
+ if ((pmgntframe = alloc_mgtxmitframe(pxmitpriv)) == NULL) {
--
ERROR: do not use assignment in if condition
3335: FILE: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:3335:
+ if (!(ndev = wdev_to_ndev(wdev)))
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/cc687c2ff614da3e110addd1c5cd610e3356cbd7.1616600897.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix the following checkpatch warning:
ERROR: do not use assignment in if condition
1118: FILE: drivers/staging/rtl8723bs/core/rtw_ieee80211.c:1118:
+ if ((addr = of_get_property(np, "local-mac-address", &len)) &&
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Link: https://lore.kernel.org/r/8e784a7e1407924724c97398af8e5aeb23460612.1616600897.git.fabioaiuto83@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the following unnecessary enum name in
include/HalPwrSeqCmd.h:
enum pwrseq_cmd_delay_unit
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210324124456.25221-23-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the following unnecessary enum definition in
include/rtw_wifi_regd.h:
enum country_code_type_t
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210324124456.25221-16-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the following unnecessary enum definition in
include/hal_com.h:
enum firmware_source
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210324124456.25221-5-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>