s/sequencially/sequentially/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/beggining/beginning/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A test with the command below gives this error:
/arch/arm/boot/dts/rv1108-evb.dt.yaml: watchdog@10360000:
clock-names:0: 'tclk' was expected
Comment from the dw_wdt.c file:
Try to request the watchdog dedicated timer clock source. It must
be supplied if asynchronous mode is enabled. Otherwise fallback
to the common timer/bus clocks configuration, in which the very
first found clock supply both timer and APB signals.
Like in the other Rockchip watchdog nodes the property "clock-names"
is not needed, so remove it.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201218120534.13788-8-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip rk322x.dtsi file only
the fallback string "snps,dw-wdt" is used, so add the new
compatible string:
"rockchip,rk3228-wdt", "snps,dw-wdt"
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201218120534.13788-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip rv1108.dtsi file only
the fallback string "snps,dw-wdt" is used, so add the new
compatible string:
"rockchip,rv1108-wdt", "snps,dw-wdt"
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201218120534.13788-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip rk3399.dtsi file only
the fallback string "snps,dw-wdt" is used, so add the new
compatible string:
"rockchip,rk3399-wdt", "snps,dw-wdt"
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201218120534.13788-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip rk3328.dtsi file only
the fallback string "snps,dw-wdt" is used, so add the new
compatible string:
"rockchip,rk3328-wdt", "snps,dw-wdt"
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201218120534.13788-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip rk3308.dtsi file only
the fallback string "snps,dw-wdt" is used, so add the new
compatible string:
"rockchip,rk3308-wdt", "snps,dw-wdt"
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201218120534.13788-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The watchdog compatible strings are suppose to be SoC orientated.
In the more recently added Rockchip px30.dtsi file only
the fallback string "snps,dw-wdt" is used, so add the new
compatible string:
"rockchip,px30-wdt", "snps,dw-wdt"
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20201218120534.13788-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit causes rcutorture to test the new start_poll_synchronize_rcu()
and poll_state_synchronize_rcu() functions. Because of the difficulty of
determining the nature of a synchronous RCU grace (expedited or not),
the test that insisted that poll_state_synchronize_rcu() detect an
intervening synchronize_rcu() had to be dropped.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a need for a non-blocking polling interface for RCU grace
periods, so this commit supplies start_poll_synchronize_rcu() and
poll_state_synchronize_rcu() for this purpose. Note that the existing
get_state_synchronize_rcu() may be used if future grace periods are
inevitable (perhaps due to a later call_rcu() invocation). The new
start_poll_synchronize_rcu() is to be used if future grace periods
might not otherwise happen. Finally, poll_state_synchronize_rcu()
provides a lockless check for a grace period having elapsed since
the corresponding call to either of the get_state_synchronize_rcu()
or start_poll_synchronize_rcu().
As with get_state_synchronize_rcu(), the return value from either
get_state_synchronize_rcu() or start_poll_synchronize_rcu() is passed in
to a later call to either poll_state_synchronize_rcu() or the existing
(might_sleep) cond_synchronize_rcu().
[ paulmck: Revert cond_synchronize_rcu() to might_sleep() per Frederic Weisbecker feedback. ]
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
While Kepler does technically support 256x256 cursors, it turns out that
Kepler actually has some additional requirements for scanout surfaces that
we're not enforcing correctly, which aren't present on Maxwell and later.
Cursor surfaces must always use small pages (4K), and overlay surfaces must
always use large pages (128K).
Fixing this correctly though will take a bit more work: as we'll need to
add some code in prepare_fb() to move cursor FBs in large pages to small
pages, and vice-versa for overlay FBs. So until we have the time to do
that, just limit cursor surfaces to 128x128 - a size small enough to always
default to small pages.
This means small ovlys are still broken on Kepler, but it is extremely
unlikely anyone cares about those anyway :).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d3b2f0f792 ("drm/nouveau/kms/nv50-: Report max cursor size to userspace")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alex Elder says:
====================
net: ipa: versions and registers
Version 2 of this series adds kernel-doc descriptions for all
members of the ipa_version enumerated type in patch 2.
The original description of the series is below.
-Alex
This series is sort of a mix of things, generally related to
updating IPA versions and register definitions.
The first patch fixes some version-related tests throughout the code
so the conditions are valid for IPA versions other than the two that
are currently supported. Support for additional versions is
forthcoming, and this is a preparatory step.
The second patch adds to the set of defined IPA versions, to include
all versions between 3.0 and 4.11.
The next defines an endpoint initialization register that was
previously not being configured. We now initialize that register
(so that NAT is explicitly disabled) on all AP endpoints.
The fourth adds support for an extra bit in a field in a register,
which is present starting at IPA v4.5.
The last two are sort of standalone. One just moves a function
definition and makes it private. The other increases the number of
GSI channels and events supported by the driver, sufficient for IPA
v4.5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Increase the maximum number of channels and event rings supported by
the driver, to allow the maximum available on the SDX55.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We only use ipa_aggr_granularity_val() inside "ipa_main.c", so it
doesn't really need to be defined in a header file. It makes some
sense to be grouped with the register definitions, but it is unlike
the other inline functions now defined in "ipa_reg.h". So move it
into "ipa_main.c" where it's used. TIMER_FREQUENCY is used only
by that function, so move that definition as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all of the bits of the LOCAL_PKT_PROC_CNTXT register are valid.
Until IPA v4.5, there are 17 valid bits (though the bottom three
must be zero). Starting with IPA v4.5, 18 bits are valid.
Introduce proc_cntxt_base_addr_encoded() to encode the base address
for use in the register using only the valid bits.
Shorten the name of the register (omit "_BASE") to avoid the need to
wrap the line in the one place it's used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the ENDP_INIT_NAT register for setting up the NAT
configuration for an endpoint. We aren't using NAT at this
time, so explicitly set the type to BYPASS for all endpoints.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPA version definitions for all IPA v3.x and v4.x. Fix the GSI
version associated with IPA version 4.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify conditional tests throughout the IPA code so they do not
assume that IPA v3.5.1 is the oldest version supported. Also remove
assumptions that IPA v4.5 is the newest version of IPA supported.
Augment versions in comments with "+", to be clearer that the
comment applies to a version and subsequent versions. (E.g.,
"present for IPA v4.2+" instead of just "present for v4.2".)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 098a697b49 ("tcp_metrics: Use a single hash table
for all network namespaces."), tcpm_hash_bucket is local to
net/ipv4/tcp_metrics.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 73f156a6e8 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.
Switch to a dynamic sizing, depending on RAM size.
Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.
As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.
Fixes: 73f156a6e8 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit added a new attribute before the existing group reference
count attribute, thereby changing its value and breaking existing
applications on new kernels.
Before:
# psample -l
libpsample ERROR psample_group_foreach: failed to recv message: Operation not supported
After:
# psample -l
Group Num Refcount Group Seq
1 1 0
Fix by restoring the value of the old attribute and remove the
misleading comments from the enumerator to avoid future bugs.
Cc: stable@vger.kernel.org
Fixes: d8bed686ab ("net: psample: Add tunnel support")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Adiel Bidani <adielb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Add support for resilient nexthop groups
This patchset adds support for resilient nexthop groups in mlxsw. As far
as the hardware is concerned, resilient groups are the same as regular
groups. The differences lie in how mlxsw manages the individual
adjacency entries (nexthop buckets) that make up the group.
The first difference is that unlike regular groups the driver needs to
periodically update the kernel about activity of nexthop buckets so that
the kernel will not treat the buckets as idle, given traffic is
offloaded from the CPU to the ASIC. This is similar to what mlxsw is
already doing with respect to neighbour entries. The update interval is
set to 1 second to allow for short idle timers.
The second difference is that nexthop buckets that correspond to an
unresolved neighbour must be programmed to the device, as the size of
the group must remain fixed. This is achieved by programming such
entries with trap action, in order to trigger neighbour resolution by
the kernel.
The third difference is atomic replacement of individual nexthop
buckets. While the driver periodically updates the kernel about activity
of nexthop buckets, it is possible for a bucket to become active just
before the kernel decides to replace it with a different nexthop. To
avoid such situations and connections being reset, the driver instructs
the device to only replace an adjacency entry if it is inactive.
Failures are propagated back to the nexthop code.
Patchset overview:
Patches #1-#7 gradually add support for resilient nexthop groups
Patch #8 finally enables such groups to be programmed to the device
Patches #9-#10 add mlxsw-specific selftests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that unsupported resilient nexthop group configurations are
rejected and that offload / trap indication is correctly set on nexthop
buckets in a resilient group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of nexthop buckets in a resilient nexthop group never
changes, so when the gateway address of a nexthop cannot be resolved,
the nexthop buckets are programmed to trap packets to the CPU in order
to trigger resolution. For example:
# ip nexthop add id 1 via 198.51.100.1 dev swp3
# ip nexthop add id 10 group 1 type resilient buckets 32
# ip nexthop bucket get id 10 index 0
id 10 index 0 idle_time 1.44 nhid 1 trap
Where 198.51.100.1 is a made-up IP.
Test that in this case packets are indeed trapped to the CPU via the
unresolved neigh trap.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that mlxsw supports resilient nexthop groups, allow them to be
programmed after validating that their configuration conforms to the
device's limitations (e.g., number of buckets is within predefined
range).
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel periodically checks the idle time of nexthop buckets to
determine if they are idle and can be re-populated with a new nexthop.
When the resilient nexthop group is offloaded to hardware, the kernel
will not see activity on nexthop buckets unless it is reported from
hardware.
Therefore, periodically (every 1 second) query the hardware for activity
of adjacency entries used as part of a resilient nexthop group and
report it to the nexthop code.
The activity is only queried if resilient nexthop groups are in use. The
delayed work is canceled otherwise.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RATRAD register is used to dump and optionally clear activity bits
of router adjacency table entries. Will be used by the next patch to
query and clear the activity of nexthop buckets in a resilient nexthop
group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So far, mlxsw only updated hardware flags ('offload' / 'trap') on
nexthop objects. For resilient nexthop groups, these flags need to be
updated on individual nexthop buckets as well.
Update these flags whenever updating the flags of the encapsulating
nexthop object and whenever a nexthop bucket is replaced.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace a single nexthop bucket upon receiving a
'NEXTHOP_EVENT_BUCKET_REPLACE' notification.
When the 'force' parameter is not set, instruct the device to only
overwrite an adjacency entry if its activity is cleared, so as not to
break existing flows using the adjacency entry. The device does not
provide feedback if the replacement was successful in this case, so the
contents of the adjacency entry after the replacement are compared with
the replacement request.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Have the caller pass a pointer to the payload of the RATR register to
the function updating a single nexthop / adjacency entry.
In a subsequent patch, this will allow the caller to make sure
replacement was successful by querying the state of the adjacency entry
after replacement and comparing with the initial request.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the driver to instruct the device to only overwrite an adjacency
entry if its activity is cleared. Currently, adjacency entry is always
overwritten, regardless of activity.
This will be used by subsequent patches to prevent replacement of active
nexthop buckets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parse the configuration of resilient nexthop groups to existing mlxsw
data structures. Unlike non-resilient groups, nexthops without a valid
MAC or router interface (RIF) are programmed with a trap action instead
of not being programmed at all.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This partially reverts commit 882213990d ("xen: fix p2m size in dom0
for disabled memory hotplug case")
There's no need to special case XEN_UNPOPULATED_ALLOC anymore in order
to correctly size the p2m. The generic memory hotplug option has
already been tied together with the Xen hotplug limit, so enabling
memory hotplug should already trigger a properly sized p2m on Xen PV.
Note that XEN_UNPOPULATED_ALLOC depends on ZONE_DEVICE which pulls in
MEMORY_HOTPLUG.
Leave the check added to __set_phys_to_machine and the adjusted
comment about EXTRA_MEM_RATIO.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210324122424.58685-3-roger.pau@citrix.com
[boris: fixed formatting issues]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The Xen memory hotplug limit should depend on the memory hotplug
generic option, rather than the Xen balloon configuration. It's
possible to have a kernel with generic memory hotplug enabled, but
without Xen balloon enabled, at which point memory hotplug won't work
correctly due to the size limitation of the p2m.
Rename the option to XEN_MEMORY_HOTPLUG_LIMIT since it's no longer
tied to ballooning.
Fixes: 9e2369c06c ("xen: add helpers to allocate unpopulated memory")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210324122424.58685-2-roger.pau@citrix.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- The Open Routing (Open/R) network protocol netlink handler uses ID 99
- Will also add to `/etc/iproute2/rt_protos` once this is accepted
- For more information: https://github.com/facebook/openr
Signed-off-by: From: Cooper Lees <me@cooperlees.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hi All,
Here is v4 of my series to rework the arizona codec jack-detect support
to use the snd_soc_jack helpers instead of direct extcon reporting.
As discussed before here is a resend rebased on 5.12-rc2, making sure that
all patches this depends on are in place.
Lee, can you pick-up patches 1-6 through the MFD tree and then send a
pull-req to Mark so that Mark can merge the Asoc parts throught the ASoC
tree ?
Patches 2-6 touch drivers/extcon, these all have an Ack from Chanwoo Choi
for merging these through the MFD tree.
Here is some more generic info on this series from the previous
cover-letter:
This is done by reworking the extcon driver into an arizona-jackdet
library and then modifying the codec drivers to use that directly,
replacing the old separate extcon child-devices and extcon-driver.
This brings the arizona-codec jack-detect handling inline with how
all other ASoC codec driver do this. This was developed and tested on
a Lenovo Yoga Tablet 1051L with a WM5102 codec.
This was also tested by Charles Keepax, one of the Cirrus Codec folks.
Regards,
Hans
Hans de Goede (13):
mfd: arizona: Drop arizona-extcon cells
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack
has been unplugged
extcon: arizona: Fix various races on driver unbind
extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol")
call
extcon: arizona: Always use pm_runtime_get_sync() when we need the
device to be awake
ASoC/extcon: arizona: Move arizona jack code to
sound/soc/codecs/arizona-jack.c
ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv
ASoC: arizona-jack: Use arizona->dev for runtime-pm
ASoC: arizona-jack: convert into a helper library for codec drivers
ASoC: arizona-jack: Use snd_soc_jack to report jack events
ASoC: arizona-jack: Cleanup logging
ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use
the new jack library
ASoC: Intel: bytcr_wm5102: Add jack detect support
MAINTAINERS | 3 +-
drivers/extcon/Kconfig | 8 -
drivers/extcon/Makefile | 1 -
drivers/mfd/arizona-core.c | 20 -
sound/soc/codecs/Makefile | 2 +-
.../soc/codecs/arizona-jack.c | 577 +++++++-----------
sound/soc/codecs/arizona.h | 44 ++
sound/soc/codecs/wm5102.c | 12 +-
sound/soc/codecs/wm5110.c | 12 +-
sound/soc/codecs/wm8997.c | 14 +-
sound/soc/codecs/wm8998.c | 9 +
sound/soc/intel/boards/bytcr_wm5102.c | 28 +-
12 files changed, 325 insertions(+), 405 deletions(-)
rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (76%)
--
2.30.1
Reading /proc/mdstat with a read buffer size that would not
fit the unused status line in the first read will skip this
line from the output.
So 'dd if=/proc/mdstat bs=64 2>/dev/null' will not print something
like: unused devices: <none>
Don't return NULL immediately in start() for v=2 but call
show() once to print the status line also for multiple reads.
Cc: stable@vger.kernel.org
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: Jan Glauber <jglauber@digitalocean.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
For far layout, the discard region is not continuous on disks. So it needs
far copies r10bio to cover all regions. It needs a way to know all r10bios
have finish or not. Similar with raid10_sync_request, only the first r10bio
master_bio records the discard bio. Other r10bios master_bio record the
first r10bio. The first r10bio can finish after other r10bios finish and
then return the discard bio.
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Now the discard request is split by chunk size. So it takes a long time
to finish mkfs on disks which support discard function. This patch improve
handling raid10 discard request. It uses the similar way with patch
29efc390b (md/md0: optimize raid0 discard handling).
But it's a little complex than raid0. Because raid10 has different layout.
If raid10 is offset layout and the discard request is smaller than stripe
size. There are some holes when we submit discard bio to underlayer disks.
For example: five disks (disk1 - disk5)
D01 D02 D03 D04 D05
D05 D01 D02 D03 D04
D06 D07 D08 D09 D10
D10 D06 D07 D08 D09
The discard bio just wants to discard from D03 to D10. For disk3, there is
a hole between D03 and D08. For disk4, there is a hole between D04 and D09.
D03 is a chunk, raid10_write_request can handle one chunk perfectly. So
the part that is not aligned with stripe size is still handled by
raid10_write_request.
If reshape is running when discard bio comes and the discard bio spans the
reshape position, raid10_write_request is responsible to handle this
discard bio.
I did a test with this patch set.
Without patch:
time mkfs.xfs /dev/md0
real4m39.775s
user0m0.000s
sys0m0.298s
With patch:
time mkfs.xfs /dev/md0
real0m0.105s
user0m0.000s
sys0m0.007s
nvme3n1 259:1 0 477G 0 disk
└─nvme3n1p1 259:10 0 50G 0 part
nvme4n1 259:2 0 477G 0 disk
└─nvme4n1p1 259:11 0 50G 0 part
nvme5n1 259:6 0 477G 0 disk
└─nvme5n1p1 259:12 0 50G 0 part
nvme2n1 259:9 0 477G 0 disk
└─nvme2n1p1 259:15 0 50G 0 part
nvme0n1 259:13 0 477G 0 disk
└─nvme0n1p1 259:14 0 50G 0 part
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The following patch will reuse these logics, so pull the same codes into
one function.
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Now it allocs r10bio->devs[conf->copies]. Discard bio needs to submit
to all member disks and it needs to use r10bio. So extend to
r10bio->devs[geo.raid_disks].
Reviewed-by: Coly Li <colyli@suse.de>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Move these logic from raid0.c to md.c, so that we can also use it in
raid10.c.
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
When enetc runs out of exact match entries for unicast address
filtering, it switches to an approach based on hash tables, where
multiple MAC addresses might end up in the same bucket.
However, the enetc_set_mac_ht_flt function currently depends on the
system endianness, because it interprets the 64-bit hash value as an
array of two u32 elements. Modify this to use lower_32_bits and
upper_32_bits.
Tested by forcing enetc to go into hash table mode by creating two
macvlan upper interfaces:
ip link add link eno0 address 00:01:02:03:00:00 eno0.0 type macvlan && ip link set eno0.0 up
ip link add link eno0 address 00:01:02:03:00:01 eno0.1 type macvlan && ip link set eno0.1 up
and verified that the same bit values are written to the registers
before and after:
enetc_sync_mac_filters: addr 00:00:80:00:40:10 exact match 0
enetc_sync_mac_filters: addr 00:00:00:00:80:00 exact match 0
enetc_set_mac_ht_flt: hash 0x80008000000000 UMHFR0 0x0 UMHFR1 0x800080
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ENETC has a 64-entry hash table for VLAN RX filtering per Station
Interface, which is accessed through two 32-bit registers: VHFR0 holding
the low portion, and VHFR1 holding the high portion.
The enetc_set_vlan_ht_filter function looks at the pf->vlan_ht_filter
bitmap, which is fundamentally an unsigned long variable, and casts it
to a u32 array of two elements. It puts the first u32 element into VHFR0
and the second u32 element into VHFR1.
It is easy to imagine that this will not work on big endian systems
(although, yes, we have bigger problems, because currently enetc assumes
that the CPU endianness is equal to the controller endianness, aka
little endian - but let's assume that we could add a cpu_to_le32 in
enetc_wd_reg and a le32_to_cpu in enetc_rd_reg).
Let's use lower_32_bits and upper_32_bits which are designed to work
regardless of endianness.
Tested that both the old and the new method produce the same results:
$ ethtool -K eth1 rx-vlan-filter on
$ ip link add link eth1 name eth1.100 type vlan id 100
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x20
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x20
$ ip link add link eth1 name eth1.101 type vlan id 101
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x30
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x30
$ ip link add link eth1 name eth1.34 type vlan id 34
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x0 VHFR1 0x34
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x0 VHFR1 0x34
$ ip link add link eth1 name eth1.1024 type vlan id 1024
enetc_set_vlan_ht_filter: method 1: si_idx 0 VHFR0 0x1 VHFR1 0x34
enetc_set_vlan_ht_filter: method 2: si_idx 0 VHFR0 0x1 VHFR1 0x34
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use memdup_user_nul() helper instead of open-coding to
simplify the code.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Made changes to coding style as suggested by checkpatch.pl
changes are of the type:
space required before the open parenthesis '('
space required after that ','
Signed-off-by: Sai Kalyaan Palla <saikalyaan63@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>