RK3328 SoCs have one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210209192350.7130-7-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit 9c698bff66 ("ARM: ensure the signal page contains defined contents")
poisoned the unused portions of the signal page for 32-bit Arm.
Implement the same poisoning for the compat signal page on arm64 rather
than using __GFP_ZERO.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210318170738.7756-6-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We can avoid the expensive ISB instruction after reading the counter in
the vDSO gettime functions by creating a fake address hazard against a
dummy stack read, just like we do inside the kernel.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210318170738.7756-5-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For compatability with 32-bit Arm, allow the compat signal page to be
remapped via mremap().
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210318170738.7756-4-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
flush_dcache_page() ensures that the 'PG_dcache_clean' flag for its
'page' argument is clear so that cache maintenance will be performed
if the page is mapped into userspace with execute permissions.
Newly allocated pages have this flag clear, so there is no need to call
flush_dcache_page() for the compat vdso or signal pages. Remove the
redundant calls.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210318170738.7756-3-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There's no need to allocate the compat vDSO and signal pages using
GFP_ATOMIC allocations, so use GFP_KERNEL instead.
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210318170738.7756-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Instead of force unbinding and rebinding every time, we try to check
if our notifier seqcount is still correct when pages are bound. This
way we only rebind userptr when we need to, and prevent stalls.
Changes since v1:
- Missing mutex_unlock, reported by kbuild.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-63-maarten.lankhorst@linux.intel.com
We need to lock the global gtt dma_resv, use i915_vm_lock_objects
to handle this correctly. Add ww handling for this where required.
Add the object lock around unpin/put pages, and use the unlocked
versions of pin_pages and pin_map where required.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-61-maarten.lankhorst@linux.intel.com
igt_emit_store_dw needs to use the unlocked version, as it's not
holding a lock. This fixes igt_gpu_fill_dw() which is used by
some other selftests.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-51-maarten.lankhorst@linux.intel.com
gcc -Wextra wants type modifiers in the normal order:
kernel/bpf/bpf_lsm.c:70:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
70 | const static struct bpf_func_proto bpf_bprm_opts_set_proto = {
| ^~~~~
kernel/bpf/bpf_lsm.c:91:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
91 | const static struct bpf_func_proto bpf_ima_inode_hash_proto = {
| ^~~~~
Fixes: 3f6719c7b6 ("bpf: Add bpf_bprm_opts_set helper")
Fixes: 27672f0d28 ("bpf: Add a BPF helper for getting the IMA hash of an inode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210322215201.1097281-1-arnd@kernel.org
'<&gpio1 parameters &gpio2 parameters>' and '<&gpio1 parameters>,
<&gpio2 parameters>' result in the same DTB, but second format has
better source code readability. Also 'dtbs_check' currently uses
this format to determine the amount of items specified, so using
this syntax is needed to successfully verify the devicetree source
against a DT schema format.
Cc: linux-omap@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Based on linux-gpio discussion [1], it is best practice to make the
gpio-line-names unique. Generic names like "[ethernet]" are replaced
with the name of the unique signal on the AM3358 SoC ball corresponding
to the gpio line. "[NC]" is also renamed to the standard "NC" name to
represent "not connected".
[1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We may create page table objects on the fly, but we may need to
wait with the ww lock held. Instead of waiting on a freed obj
lock, ensure we have the same lock for each object to keep
-EDEADLK working. This ensures that i915_vma_pin_ww can lock
the page tables when required.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-41-maarten.lankhorst@linux.intel.com
Because of the long lifetime of the mapping, we cannot wrap this in a
simple limited ww lock. Just use the unlocked version of pin_map,
because we'll likely release the mapping a lot later, in a different
thread.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-39-maarten.lankhorst@linux.intel.com
vmap is using pin_pages, but needs to use ww locking,
add pin_pages_unlocked to correctly lock the mapping.
Also add ww locking to begin/end cpu access.
Changes since v1:
- Fix i915_gem_map_dma_buf by using pin_pages_unlocked().
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-38-maarten.lankhorst@linux.intel.com
In the ucode functions, the calls are done before userspace runs,
when debugging using debugfs, or when creating semi-permanent mappings;
we can safely use the unlocked versions that does the ww dance for us.
Because there is no pin_pages_unlocked yet, add it as convenience function.
This removes possible lockdep splats about missing resv lock for ucode.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-37-maarten.lankhorst@linux.intel.com
By default, we assume that it's called inside igt_create_request
to keep existing selftests working, but allow for manual pinning
when passing a ww context.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-34-maarten.lankhorst@linux.intel.com
Stolen objects need to lock, and we may call put_pages when
refcount drops to 0, ensure all calls are handled correctly.
Changes since v1:
- Rebase on top of upstream changes.
Idea-from: Thomas Hellström <thomas.hellstrom@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-33-maarten.lankhorst@linux.intel.com
We need to take the obj lock to pin pages, so wait until the callers
have done so, before making the object unshrinkable.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-30-maarten.lankhorst@linux.intel.com
Take the ww lock around engine_unpark. Because of the
many many places where rpm is used, I chose the safest option
and used a trylock to opportunistically take this lock for
__engine_unpark.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-28-maarten.lankhorst@linux.intel.com
Make creation separate from pinning, in order to take the lock only
once, and pin the mapping with the lock held.
Changes since v1:
- Rebase on top of upstream changes.
Changes since v2:
- Fully clear wa_ctx on error.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-27-maarten.lankhorst@linux.intel.com