Name the probe error labels after what they do rather than using
sequence numbers which is harder to review and maintain (e.g. may
require renaming unrelated labels when a label is added or removed).
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to clear the interface driver data on failed probe (and
driver core will clear it anyway).
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interface driver data has already been set by
usb_driver_claim_interface() so drop the redundant subsequent
assignment.
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If tty-device registration fails the driver would fail to release the
data interface. When the device is later disconnected, the disconnect
callback would still be called for the data interface and would go about
releasing already freed resources.
Fixes: c93d819550 ("usb: cdc-acm: fix error handling in acm_probe()")
Cc: stable@vger.kernel.org # 3.9
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If tty-device registration fails the driver copy of any Country
Selection functional descriptor would end up being freed twice; first
explicitly in the error path and then again in the tty-port destructor.
Drop the first erroneous free that was left when fixing a tty-port
resource leak.
Fixes: cae2bc768d ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the correct DSS CTL registers for ICL DSI transcoders.
As a side effect, this also brings back the sanity check for trying to
use pipe DSC registers on pipe A on ICL.
Fixes: 8a029c113b ("drm/i915/dp: Modify VDSC helpers to configure DSC for Bigjoiner slave")
References: http://lore.kernel.org/r/87eegxq2lq.fsf@intel.com
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210319115333.8330-1-jani.nikula@intel.com
(cherry picked from commit 5706d02871)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The enabled_planes bitmask was supposed to track logically enabled
planes (ie. fb!=NULL and crtc!=NULL), but instead we end up putting
even disabled planes into the bitmask since
intel_plane_atomic_check_with_state() only takes the early exit
if the plane was disabled and stays disabled. I think I misread
the early said codepath to exit whenever the plane is logically
disabled, which is not true.
So let's fix this up properly and set the bit only when the plane
actually is logically enabled.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: ee42ec19ca ("drm/i915: Track logically enabled planes for hw state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit 97bc7ffa1b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
By the specification the 0xF0000 - 0xF02FF range is only valid if the
LTTPR revision at 0xF0000 is at least 1.4. Disable the LTTPR support
otherwise.
Fixes: 7b2a4ab8b0 ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-4-imre.deak@intel.com
(cherry picked from commit 1663ad4936)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
By the specification the 0xF0000-0xF02FF range is only valid when the
DPCD revision is 1.4 or higher. Disable LTTPR support if this isn't so.
Trying to detect LTTPRs returned corrupted values for the above DPCD
range at least on a Skylake host with an LG 43UD79-B monitor with a DPCD
revision 1.2 connected.
v2: Add the actual version check.
v3: Fix s/DRPX/DPRX/ typo.
Fixes: 7b2a4ab8b0 ("drm/i915: Switch to LTTPR transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317190149.4032966-1-imre.deak@intel.com
(cherry picked from commit 264613b406)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The spec requires to use at least 3.2ms for the AUX timeout period if
there are LT-tunable PHY Repeaters on the link (2.11.2). An upcoming
spec update makes this more specific, by requiring a 3.2ms minimum
timeout period for the LTTPR detection reading the 0xF0000-0xF0007
range (3.6.5.1).
Accordingly disable LTTPR detection until GLK, where the maximum timeout
we can set is only 1.6ms.
Link training in the non-transparent mode is known to fail at least on
some SKL systems with a WD19 dock on the link, which exposes an LTTPR
(see the References below). While this could have different reasons
besides the too short AUX timeout used, not detecting LTTPRs (and so not
using the non-transparent LT mode) fixes link training on these systems.
While at it add a code comment about the platform specific maximum
timeout values.
v2: Add a comment about the g4x maximum timeout as well. (Ville)
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Santiago Zarate <santiago.zarate@suse.com>
Reported-and-tested-by: Bodo Graumann <mail@bodograumann.de>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3166
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: <stable@vger.kernel.org> # v5.11
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317184901.4029798-2-imre.deak@intel.com
(cherry picked from commit 984982f3ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This failure is so common that logging an error here amounts
to spamming log files.
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Counting break events is nice but we should actually report them to
the tty layer.
Fixes: 5a6a62bdb9 ("cdc-acm: add TIOCMIWAIT")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool.
however, dev->dev is actually set after calling init_dma_pools(), which
effectively makes dma_pool_create(..NULL) and cause crash.
To fix this issue, init dma only after dev->dev is set.
[ 1.317993] RIP: 0010:dma_pool_create+0x83/0x290
[ 1.323257] Call Trace:
[ 1.323390] ? pci_write_config_word+0x27/0x30
[ 1.323626] init_dma_pools+0x41/0x1a0 [snps_udc_core]
[ 1.323899] udc_pci_probe+0x202/0x2b1 [amd5536udc_pci]
Fixes: 7c51247a1f (usb: gadget: udc: Provide correct arguments for 'dma_pool_create')
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems that on Intel Merrifield platform the USB PHY shouldn't be suspended.
Otherwise it can't be enabled by simply change the cable in the connector.
Enable corresponding quirk for the platform in question.
Fixes: e5f4ca3fce ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210322125244.79407-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the gadget driver doesn't specify a max_speed, then use the
controller's maximum supported speed as default. For DWC_usb32 IP, the
gadget's speed maybe limited to gen2x1 rate only if the driver's
max_speed is unknown. This scenario should not occur with the current
implementation since the default gadget driver's max_speed should always
be specified. However, to make the driver more robust and help with
readability, let's cover all the scenarios in __dwc3_gadget_set_speed().
Fixes: 450b9e9fab ("usb: dwc3: gadget: Set speed only up to the max supported")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/55ac7001af73bfe9bc750c6446ef4ac8cf6f9313.1615254129.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the dwc->gadget_max_speed to SuperSpeed Plus if the user sets the
ssp_rate. The udc_set_ssp_rate() is intended for setting the gadget's
speed to SuperSpeed Plus at the specified rate.
Fixes: 072cab8a0f ("usb: dwc3: gadget: Implement setting of SSP rate")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/0b2732e2f380d9912ee87f39dc82c2139223bad9.1615254129.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ACPI probe starts failing since commit bea46b9815 ("usb: dwc3:
qcom: Add interconnect support in dwc3 driver"), because there is no
interconnect support for ACPI, and of_icc_get() call in
dwc3_qcom_interconnect_init() will just return -EINVAL.
Fix the problem by skipping interconnect init for ACPI probe, and then
the NULL icc_path_ddr will simply just scheild all ICC calls.
Fixes: bea46b9815 ("usb: dwc3: qcom: Add interconnect support in dwc3 driver")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311060318.25418-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current dwc3_gadget_reset_interrupt() will stop any active
transfers, but only addresses blocking of EP queuing for while we are
coming from a disconnected scenario, i.e. after receiving the disconnect
event. If the host decides to issue a bus reset on the device, the
connected parameter will still be set to true, allowing for EP queuing
to continue while we are disabling the functions. To avoid this, set the
connected flag to false until the stop active transfers is complete.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add checks similar to dwc3_gadget_ep_queue() before kicking off
transfers after getting an endpoint completion event. Since cleaning
up completed requests will momentarily unlock dwc->lock, there is a
chance for a sequence like pullup disable to be executed. This can
lead to preparing a TRB, which will be removed by the pullup disable
routine.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1616146285-19149-2-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Force-threaded interrupt handlers used to run with interrupts enabled,
something which could lead to deadlocks in case a threaded handler
shared a lock with code running in hard interrupt context (e.g. timer
callbacks) and did not explicitly disable interrupts.
Since commit 81e2073c17 ("genirq: Disable interrupts for force
threaded handlers") interrupt handlers always run with interrupts
disabled on non-RT so that drivers no longer need to do handle forced
threading ("threadirqs").
Drop the now obsolete workaround added by commit 63aea0dbab ("USB:
xhci: fix lock-inversion problem").
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322111140.32056-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These were added in commit 780cc0f370 ("usb: gadget: add '__ref' for
rndis_config_register() and cdc_config_register()") to silence
modpost, but they didn't fix the real problem - that was fixed later
by removing wrong __init annotations in commit c94e289f19 ("usb:
gadget: remove incorrect __init/__exit annotations").
It really never makes sense for a function to be marked __ref unless
it (1) has some conditional that chooses whether to call an __init
function (or access __initdata) or not and (2) has a comment
explaining why the __ref is there and why it is safe.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20210323081607.405904-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The file has been replaced by power-supply.yaml and all links
have been updated to the new file.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Existing in-tree users make use of '"ti,bq20z45", "sbs,sbs-battery"', so
add it to the list of known compatible strings.
Also add missing support for the generic 'power-supplies' property by
importing power-supply.yaml and setting unevaluatedProperties instead
of additionalProperties.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert the binding to DT schema format.
Note: The battery node does not have a compatible value and needs
to be described from the binding file for the PMIC. That has not
yet been converted, so I kept the information in plaintext for now.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert the binding to DT schema format.
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Convert the binding to DT schema format.
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
User can configure f_uac1 function via p_chmask/c_chmask
whether uac1 shall support playback and/or capture,
but it has only effect on the created ALSA device,
but not on the USB descriptor.
This patch adds playback/capture descriptors
dependent on that parameter. It is similar to
the same conversion done earlier for f_uac2
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-6-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently user can configure UAC1 function with
parameters that violate UAC1 spec or are not supported
by UAC1 gadget implementation.
This can lead to incorrect behavior if such gadget
is connected to the host - like enumeration failure
or other issues depending on host's UAC1 driver
implementation, bringing user to a long hours
of debugging the issue.
Instead of silently accept these parameters, throw
an error if they are not valid.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-5-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently user can configure UAC2 function with
parameters that violate UAC2 spec or are not supported
by UAC2 gadget implementation.
This can lead to incorrect behavior if such gadget
is connected to the host - like enumeration failure
or other issues depending on host's UAC2 driver
implementation, bringing user to a long hours
of debugging the issue.
Instead of silently accept these parameters, throw
an error if they are not valid.
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-4-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>