Commit graph

1,014,740 commits

Author SHA1 Message Date
Uwe Kleine-König
965ebe39c9 pwm: atmel-hlcdc: Use pwmchip_add() instead of pwmchip_add_with_polarity()
The only side effect of this change is that pwm->state.polarity is
initialized to PWM_POLARITY_NORMAL instead of PWM_POLARITY_INVERSED.
However all other members of pwm->state are uninitialized and consumers
are expected to provide the right polarity (either by setting it explicitly
or by using a helper like pwm_init_state() that overwrites .polarity
anyhow with a value independent of the initial value).

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 12:19:08 +01:00
Uwe Kleine-König
fc423f29f7 pwm: bcm-kona: Use pwmchip_add() instead of pwmchip_add_with_polarity()
The only side effect of this change is that pwm->state.polarity is
initialized to PWM_POLARITY_NORMAL instead of PWM_POLARITY_INVERSED.
However all other members of pwm->state are uninitialized and consumers
are expected to provide the right polarity (either by setting it explicitly
or by using a helper like pwm_init_state() that overwrites .polarity
anyhow with a value independent of the initial value).

The eventual goal is to remove pwmchip_add_with_polarity() and so simplify
the data flow in the PWM core.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 12:18:54 +01:00
Robert Foss
96387cffeb media: camss: Add CAMSS_845 camss version
Add enum representing the SDM845 SOC, which incorporates version
170 of the Titan architecture ISP.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 12:16:00 +01:00
Robert Foss
c3177cb018 media: camss: Replace trace_printk() with dev_dbg()
trace_printk() should not be used in production code,
since extra memory is used for special buffers whenever
trace_puts() is used.

Replace it with dev_dbg() which provides all of the desired
debugging functionality.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Suggested-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 12:15:29 +01:00
Robert Foss
ad46e1a8d8 media: camss: Fix vfe_isr comment typo
Comment refers to ISPIF, but this is incorrect. Only
the VFE interrupts are handled by this function.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 12:14:52 +01:00
Robert Foss
d8bdc3e456 media: camss: Fix vfe_isr_comp_done() documentation
Function name in comment is wrong, and was changed to be
the same as the actual function name.

The comment was changed to kerneldoc format.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 12:14:27 +01:00
Uwe Kleine-König
9f0f6107e0 pwm: cros-ec: Refuse requests with unsupported polarity
The driver only supports normal polarity and so should refuse requests
for inversed polarity.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 12:08:06 +01:00
Uwe Kleine-König
09081c9ba6 pwm: sprd: Refuse requests with unsupported polarity
The driver only supports normal polarity and so should refuse requests
for inversed polarity.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 12:07:26 +01:00
Uwe Kleine-König
c77e99f434 pwm: atmel-tcb: Only free resources after pwm_chip_remove() returned
Otherwise the PWM stops working before the PWM core and its consumers
are aware the device is going away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 12:06:45 +01:00
Uwe Kleine-König
30882cf130 pwm: atmel-tcb: Implement .apply callback
This is just pushing down the core's compat code down into the driver using
the legacy callback nearly unchanged. The call to .enable() was just
dropped from .config() because .apply() calls it unconditionally.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 12:06:26 +01:00
Xiaofeng Cao
30bcc51037 media: radio-si476x: rectify spelling and grammar
Change 'inaccesable' to 'inaccessible'
Change 'detrmine' to 'determine'
Delete 'in' grammatically

Signed-off-by: Xiaofeng Cao <caoxiaofeng@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:58:42 +01:00
Fabio Estevam
3f5b610b45 media: camera-mx3: Remove unused header file
The imx3 camera driver has been removed a long time ago, so get
rid of this unused header file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:58:22 +01:00
Fabio Estevam
60250052a1 media: camera-mx2: Remove unused header file
The imx27/imx25 camera driver has been removed a long time ago,
so get rid of this unused header file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:58:05 +01:00
Bhaskar Chowdhury
4b19f9716a media: pci: saa7164: Rudimentary spelling fixes in the file saa7164-types.h
s/structues/structures/
s/decies/decides/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:57:37 +01:00
Hans Verkuil
8d1f2c37fc media: ext-ctrls-codec.rst: fix typos
The _FRAME_SKIP_ enums were missing the _VIDEO prefix.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:56:53 +01:00
Hans Verkuil
ea1611ba3a media: v4l2-ctrls.c: initialize flags field of p_fwht_params
The V4L2_CID_STATELESS_FWHT_PARAMS compound control was missing a
proper initialization of the flags field, so after loading the vicodec
module for the first time, running v4l2-compliance for the stateless
decoder would fail on this control because the initial control value
was considered invalid by the vicodec driver.

Initializing the flags field to sane values fixes this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:56:09 +01:00
Hans Verkuil
eaaea46819 media: gspca/sq905.c: fix uninitialized variable
act_len can be uninitialized if usb_bulk_msg() returns an error.
Set it to 0 to avoid a KMSAN error.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+a4e309017a5f3a24c7b3@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:55:48 +01:00
Hans Verkuil
48e15418e4 media: v4l2-ioctl.c: fix timestamp format
The timestamp uses microseconds, not nanoseconds, so use %06ld instead
of %09ld.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:55:32 +01:00
Uwe Kleine-König
d58cb0ee51 pwm: Return -EINVAL for old-style drivers without .set_polarity callback
Since commit 2b1c1a5d51 ("pwm: Use -EINVAL for unsupported polarity")
all drivers implementing the apply callback are unified to return
-EINVAL if an unsupported polarity is requested. Do the same in the
compat code for old-style drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 11:55:20 +01:00
Vasanth
05e48d894a drivers: hv: Fix EXPORT_SYMBOL and tab spaces issue
1.Fixed EXPORT_SYMBOL should be follow immediately function/variable.
2.Fixed code tab spaces issue.

Signed-off-by: Vasanth M <vasanth3g@gmail.com>
Link: https://lore.kernel.org/r/20210310052155.39460-1-vasanth3g@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-22 10:55:03 +00:00
Hans Verkuil
bea7515df5 media: v4l2-dev.c: show which events are requested by poll()
This helps debugging poll problems.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:54:31 +01:00
Hans Verkuil
c10a3718d9 media: media/usb/gspca/w996Xcf.c: /** -> /*
The copyright text is just a comment, not kernel-doc documentation.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:54:09 +01:00
Andrea Parri (Microsoft)
0c85c54bf7 Drivers: hv: vmbus: Drop error message when 'No request id available'
Running out of request IDs on a channel essentially produces the same
effect as running out of space in the ring buffer, in that -EAGAIN is
returned.  The error message in hv_ringbuffer_write() should either be
dropped (since we don't output a message when the ring buffer is full)
or be made conditional/debug-only.

Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Fixes: e8b7db3844 ("Drivers: hv: vmbus: Add vmbus_requestor data structure for VMBus hardening")
Link: https://lore.kernel.org/r/20210301191348.196485-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-22 10:53:48 +00:00
Liu Ying
c451ee146d media: docs: Fix data organization of MEDIA_BUS_FMT_RGB101010_1X30
The media bus bit width of MEDIA_BUS_FMT_RGB101010_1X30 is 30.
So, 'Bit31' and 'Bit30' cells for the 'MEDIA_BUS_FMT_RGB101010_1X30'
row should be spaces instead of '0's.

Fixes: 54f38fcae5 ("media: docs: move uAPI book to userspace-api/media")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:53:28 +01:00
Daniel Niv
c759b2970c media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
Add a fix for the memory leak bugs that can occur when the
saa7164_encoder_register() function fails.
The function allocates memory without explicitly freeing
it when errors occur.
Add a better error handling that deallocate the unused buffers before the
function exits during a fail.

Signed-off-by: Daniel Niv <danielniv3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:53:03 +01:00
Uwe Kleine-König
f9a8ee8c8b pwm: Always allocate PWM chip base ID dynamically
Since commit 5e5da1e9fb ("pwm: ab8500: Explicitly allocate pwm chip
base dynamically") all drivers use dynamic ID allocation explicitly. New
drivers are supposed to do the same, so remove support for driver
specified base IDs and drop all assignments in the low-level drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 11:53:00 +01:00
Xiaofeng Cao
aa966274d6 media: Correct 'so'
In Kconfig it should be 'to'
In c8sectpfe-core.c it should be 'do'

Signed-off-by: Xiaofeng Cao <cxfcosmos@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:52:09 +01:00
Ricardo Ribalda
2f65fcee30 media: videobuf2: Explicitly state max size of planes
The plane size needs to be PAGE_ALIGNED, so it is not possible to have
sizes bigger than MAX_INT - PAGE_SIZE.

We already check for overflows when that happen:
 if (size < vb->planes[plane].length)
	goto free;

But it is good to explicitly state our max allowed value, in order to
align with the driver expectations.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 11:51:44 +01:00
Fabio Estevam
5a43c201c9 pwm: imx-tpm: Use a single line for error message
There is no need to split the dev_err() call in three lines.

Use a single line to improve readability.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 11:49:46 +01:00
Uwe Kleine-König
acf3402d83 pwm: ab8500: Implement .apply instead of .config, .enable and .disable
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 11:48:49 +01:00
Uwe Kleine-König
ca0d2fb790 pwm: bcm2835: Improve period and duty cycle calculation
With an input clk rate bigger than 2000000000, scaler would have been
zero which then would have resulted in a division by zero.

Also the originally implemented algorithm divided by the result of a
division. This nearly always looses precision. Consider a requested period
of 1000000 ns. With an input clock frequency of 32786885 Hz the hardware
was configured with an actual period of 983869.007 ns (PERIOD = 32258)
while the hardware can provide 1000003.508 ns (PERIOD = 32787).
And note if the input clock frequency was 32786886 Hz instead, the hardware
was configured to 1016656.477 ns (PERIOD = 33333) while the optimal
setting results in 1000003.477 ns (PERIOD = 32787).

This patch implements proper range checking and only divides once for
the calculation of period (and similar for duty_cycle).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 11:48:07 +01:00
Bhaskar Chowdhury
5671d9718f s390/kernel: fix a typo
s/struture/structure/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210322062500.3109603-1-unixbhaskar@gmail.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:05 +01:00
Julian Wiedmann
396c100472 s390/qdio: let driver manage the QAOB
We are spending way too much effort on qdio-internal bookkeeping for
QAOB management & caching, and it's still not robust. Once qdio's
TX path has detached the QAOB from a PENDING buffer, we lost all
track of it until it shows up in a CQ notification again. So if the
device is torn down before that notification arrives, we leak the QAOB.

Just have the driver take care of it, and simply pass down a QAOB if
they want a TX with async-completion capability. For a buffer in PENDING
state that requires the QAOB for final completion, qeth can now also try
to recycle the buffer's QAOB rather than unconditionally freeing it.

This also eliminates the qdio_outbuf_state array, which was only needed
to transfer the aob->user1 tag from the driver to the qdio layer.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:05 +01:00
Niklas Schnelle
95b3a8b401 s390/pci: move zpci_remove_device() to bus code
The zpci_remove_device() function removes the device from the PCI common
code core which is an operation dealing primarily with the zbus and PCI
bus code. With that and to match an upcoming refactoring of the
symmetric scanning part move it to the bus code.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:04 +01:00
Niklas Schnelle
2631f6b6f2 s390/pci: unify de-/configure for slots and events
A zPCI event with PEC 0x0301 for an existing zPCI device goes through
the same actions as enable_slot(). Similarly a zPCI event with PEC
0x0303 does the same steps as disable_slot().
We can thus unify both actions as zpci_configure_device() respectively
zpci_deconfigure_device().

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:04 +01:00
Vineeth Vijayan
a4f17cc726 s390/cio: add CRW inject functionality
This patch introduces the mechanism to inject artificial events to the
CIO layer.

One of the main-event type which triggers the CommonIO operations are
Channel Report events. When a malfunction or other condition affecting
channel-subsystem operation is recognized, a Channel Report Word
(consisting of one or more CRWs) describing the condition is made
pending for retrieval and analysis by the program. The CRW contains
information concerning the identity and state of a facility following
the detection of the malfunction or other condition.

The patch introduces two debugfs interfaces which can be used to inject
'artificial' events from the userspace. It is intended to provide an easy
means to increase the test coverage for CIO code. And this functionality
can be enabled via a new configuration option CONFIG_CIO_INJECT.

The newly introduces debugfs interfaces can be used as mentioned below
to generate different fake-events. To use the crw_inject, first we should
enable it by using enable_inject interface.
i.e

echo 1 > /sys/kernel/debug/s390/cio/enable_inject

After the first step, user can simulate CRW as follows:

echo <solicited> <overflow> <chaining> <rsc> <ancillary> <erc> <rsid> \
                               > /sys/kernel/debug/s390/cio/crw_inject

Example:
A permanent error ERC on CHPID 0x60 would look like this:

  echo 0 0 0 4 0 6 0x60 > /sys/kernel/debug/s390/cio/crw_inject

and an initialized ERC on the same CHPID:

  echo 0 0 0 4 0 2 0x60 > /sys/kernel/debug/s390/cio/crw_inject

Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:04 +01:00
Vineeth Vijayan
64a715ab4e s390/cio: introduce CIO debugfs directory
This patch introduces an s390 Common I/O layer debugfs directory that is
intended to provide access to debugging-related CIO functions and data.
The directory is created as /sys/kernel/debug/s390/cio

Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:04 +01:00
Niklas Schnelle
dee60c0dbc s390/pci: add zpci_event_hard_deconfigured()
Extract the handling of PEC 0x0304 into a function and make sure we only
attempt to disable the function if it is enabled. Also check for errors
returned by zpci_disable_device() and leave the function alone if there
are any.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:04 +01:00
Niklas Schnelle
a9045c2210 s390/pci: deconfigure device on release
When zpci_release_device() is called on a zPCI function that is still
configured it would not be deconfigured. Until now this hasn't caused
any problems because zpci_zdev_put() is only ever called for devices
in Standby or Reserved. Fix it by adding sclp_pci_deconfigure() to the
switch when in Configured state.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:04 +01:00
Niklas Schnelle
f6576a1b48 s390/pci: refactor zpci function states
The current zdev->state mixes the configuration states supported by CLP
with an additional Online state which is used inconsistently to include
enabled zPCI functions which are not yet visible to the common PCI
subsytem. In preparation for a clean separation between architected
configuration states and fine grained function states remove the Online
function state.

Where we previously checked for Online it is more accurate to check if
the function is enabled to avoid an edge case where a disabled device
was still treated as Online. This also simplifies checks whether
a function is configured as this is now directly reflected by its
function state.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:03 +01:00
Peter Oberparleiter
98ce70b769 s390/sclp: increase sclp console line length
Kernel and console/TTY messages written to the SCLP line mode console
are wrapped at 80 characters per line by the associated SCLP driver.
This makes long lines of output difficult to read, and requires editing
of wrapped lines copied from the output device.

Neither the firmware interface used to access the SCLP console, nor the
HMC "Operating System Messages" web interface that displays these
messages require such a length limit. Also other operating systems such
as z/VM do not impose similar limits on messages they emit to the same
console device.

This patch therefore increases the limit to 320 characters per line to
make SCLP line mode console output more readable. As a result 99% of
lines written during a typical boot will not be wrapped, compared to
about 50% wrapped lines at 80 characters per line. Another positive
side-effect of this change is that the HMC console interface is able to
keep more messages in its history buffer due to fewer line-breaks being
generated.

In a worst case scenario this means that a 4k console buffer is emitted
with the last ~400 bytes empty (320 text + 78 headers). This is more
than offset by the fact that each line that is not truncated saves 78
header bytes in the buffer. As a result the actual number of emitted
buffers should be about the same as with the 80 character limit.

This patch also removes the differentiation between line lengths of
SCLP line mode output on z/VM and non-z/VM systems. While the z/VM
hypervisor adds a prefix in front of each line ('xx: ' where xx is the
number of the CPU issuing the message), adjusting Linux line lengths did
not significantly increase readability of console output, and makes even
less of a difference with longer lines.

Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:03 +01:00
Janosch Frank
37564ed834 s390/uv: add prot virt guest/host indication files
Let's export the prot_virt_guest and prot_virt_host variables into the
UV sysfs firmware interface to make them easily consumable by
administrators.

prot_virt_host being 1 indicates that we did the UV
initialization (opt-in)

prot_virt_guest being 1 indicates that the UV indicates the share and
unshare ultravisor calls which is an indication that we are running as
a protected guest.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:03 +01:00
Mirela Rabulea
be157db0a3 media: Add maintainer for IMX jpeg v4l2 driver
The driver is located in drivers/media/platform/imx-jpeg,
and it applies to the JPEG decoder from i.MX QXP and QM.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:50:21 +01:00
Mirela Rabulea
2db16c6ed7 media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder
V4L2 driver for the JPEG encoder/decoder from i.MX8QXP/i.MX8QM application
processors.
The multi-planar buffers API is used.

Baseline and extended sequential jpeg decoding is supported.
Progressive jpeg decoding is not supported by the IP.
Supports encode and decode of various formats:
     YUV444, YUV422, YUV420, RGB, ARGB, Gray
YUV420 is the only multi-planar format supported.
Minimum resolution is 64 x 64, maximum 8192 x 8192.
The alignment requirements for the resolution depend on the format,
multiple of 16 resolutions should work for all formats.

v4l2-compliance tests are passing, including the
streaming tests, "v4l2-compliance -s"

[hverkuil: fix kernel-doc typos]

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:47:21 +01:00
Mirela Rabulea
819f3ea51d media: Avoid parsing quantization and huffman tables
These are optional in struct v4l2_jpeg_header, so skip DHT/DQT segment
parsing if huffman_tables/quantization_tables were not requested by user,
to save time.
However, do count them (num_dht/num_dqt).

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:40:13 +01:00
Mirela Rabulea
ccbea178db media: Quit parsing stream if doesn't start with SOI
In the case we get an invalid stream, such as from v4l2-compliance
streaming test, jpeg_next_marker will end up parsing the entire
stream. The standard describes the high level syntax of a jpeg
as starting with SOI, ending with EOI, so return error if the very
first 2 bytes are not SOI.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:39:30 +01:00
Mirela Rabulea
b8035f7988 media: Add parsing for APP14 data segment in jpeg helpers
According to Rec. ITU-T T.872 (06/2012) 6.5.3
APP14 segment is for color encoding, it contains a transform flag, which
may have values of 0, 1 and 2 and are interpreted as follows:
0 - CMYK for images that are encoded with four components
  - RGB for images that are encoded with three components
1 - An image encoded with three components using YCbCr colour encoding.
2 - An image encoded with four components using YCCK colour encoding.

This is used in imx-jpeg decoder, to distinguish between
YUV444 and RGB24.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:35:36 +01:00
Mirela Rabulea
b16ed1e660 media: dt-bindings: Add bindings for i.MX8QXP/QM JPEG driver
Add bindings documentation for i.MX8QXP/QM JPEG decoder & encoder driver.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:34:50 +01:00
Mirela Rabulea
0376a51fbe media: v4l: Add packed YUV444 24bpp pixel format
The added format is V4L2_PIX_FMT_YUV24, this is a packed
YUV 4:4:4 format, with 8 bits for each component, 24 bits
per sample.

This format is used by the i.MX 8QuadMax and i.MX 8DualXPlus/8QuadXPlus
JPEG encoder/decoder.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:34:16 +01:00
Hans Verkuil
7432376a3f media: cec/core/cec-notifier: use IS_REACHABLE(CONFIG_I2C)
If CONFIG_I2C=m and CONFIG_CEC_CORE=y then of_find_i2c_device_by_node()
is not reachable. So use IS_REACHABLE instead of IS_ENABLED.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: a62943c145c1 ("media: cec-notifier: also search for HDMI devices on I2C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-22 10:24:44 +01:00