The function e1000e_pm_prepare() may have no callers depending
on configuration, so it must be marked __maybe_unused to avoid
harmless warning:
drivers/net/ethernet/intel/e1000e/netdev.c:6926:12:
warning: 'e1000e_pm_prepare' defined but not used [-Wunused-function]
6926 | static int e1000e_pm_prepare(struct device *dev)
| ^~~~~~~~~~~~~~~~~
Fixes: ccf8b940e5 ("e1000e: Leverage direct_complete to speed up s2ram")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the following coccicheck warnings:
./drivers/net/ethernet/intel/igc/igc_main.c:4961:2-14: WARNING:
Assignment of 0/1 to bool variable.
./drivers/net/ethernet/intel/igc/igc_main.c:4955:2-14: WARNING:
Assignment of 0/1 to bool variable.
./drivers/net/ethernet/intel/igc/igc_main.c:4933:1-13: WARNING:
Assignment of 0/1 to bool variable.
./drivers/net/ethernet/intel/igc/igc_main.c:4592:1-24: WARNING:
Assignment of 0/1 to bool variable.
./drivers/net/ethernet/intel/igc/igc_main.c:4438:2-25: WARNING:
Assignment of 0/1 to bool variable.
./drivers/net/ethernet/intel/igc/igc_main.c:4396:2-25: WARNING:
Assignment of 0/1 to bool variable.
./drivers/net/ethernet/intel/igc/igc_main.c:4018:2-25: WARNING:
Assignment of 0/1 to bool variable.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
MII_CR_LOOPBACK masks not in use in i225 device and can be removed.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The mailing list for MPTCP maintenance has moved to the
kernel.org-supported mptcp@lists.linux.dev address.
Complete, combined archives for both lists are now hosted at
https://lore.kernel.org/mptcp
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-03-19
This series contains updates to e1000e and igb drivers.
Tom Seewald fixes duplicate guard issues by including the driver name in
the guard for e1000e and igb.
Jesse adds checks that timestamping is on and valid to avoid possible
issues with a misinterpreted time stamp for igb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Force PHY speed not supported for i225 devices.
MII_CR_SPEED masks not in use in i225 device and can be removed.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
For AF_VSOCK, accept() currently returns sockets that are unlabelled.
Other socket families derive the child's SID from the SID of the parent
and the SID of the incoming packet. This is typically done as the
connected socket is placed in the queue that accept() removes from.
Reuse the existing 'security_sk_clone' hook to copy the SID from the
parent (server) socket to the child. There is no packet SID in this
case.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL)
This is due to tx_fifo_size being 0, since this value is used to compute valid
MTU range.
Like dwmac-sunxi (with commit 806fd188ce ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes"))
dwmac-sun8i need to have tx and rx fifo sizes set.
I have used values from datasheets.
After this patch, setting a non-default MTU (like 1000) value works and network is still useable.
Tested-on: sun8i-h3-orangepi-pc
Tested-on: sun8i-r40-bananapi-m2-ultra
Tested-on: sun50i-a64-bananapi-m64
Tested-on: sun50i-h5-nanopi-neo-plus2
Tested-on: sun50i-h6-pine-h64
Fixes: 9f93ac8d40 ("net-next: stmmac: Add dwmac-sun8i")
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I was working on a syzbot issue, claiming one device could not be
dismantled because its refcount was -1
unregister_netdevice: waiting for sit0 to become free. Usage count = -1
It would be nice if syzbot could trigger a warning at the time
this reference count became negative.
This patch adds CONFIG_PCPU_DEV_REFCNT options which defaults
to per cpu variables (as before this patch) on SMP builds.
v2: free_dev label in alloc_netdev_mqs() is moved to avoid
a compiler warning (-Wunused-label), as reported
by kernel test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: update configuration data
Each IPA version has a "data" file defining how various things are
configured. This series gathers a few updates to this information:
- The first patch makes all configuration data constant
- The second fixes an incorrect (but seemingly harmless) value
- The third simplifies things a bit by using implicit zero
initialization for memory regions that are empty
- The fourth adds definitions for memory regions that exist but
are not yet used
- The fifth use configuration data rather than conditional code to
set some bus parameters
====================
Define the maximum number of reads and writes to configure for the
QSB masters used for IPA in configuration data.
We don't use these values yet; the next commit takes care of that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are several memory regions that are defined starting with IPA
v4.0, but which were not used for the SC7180 SoC (IPA v4.2). Even
though they're not used (yet), define them so they are ready to be
used for SoCs when they become supported.
There are two QUOTA statistics memory regions, one for the modem and
one for the AP. Define distinct names for these regions, and get
rid of the definition of IPA_MEM_STATS_QUOTA.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The AP_HEADER memory region for both the SDM845 and SC7180 SoCs has
zero size, and has no canaries. Defining an offset for such a
zero-length region is not meaningful, so it's better not to define
it at all. The size of this region is used in the code, but its
value will still be zero because the memory regions are defined in
statically initialized memory.
For the SC7180, the STATS_DROP memory region has a zero size and no
canaries as well.
These regions are the only place where a zero-sized region is
defined despite having no canaries. Remove them.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There should be no canary values written before the beginning of the
UC_INFO memory region. This was correct for SDM845, but somehow was
committed with the wrong value for SC7180.
This bug seems to cause no harm, so we'll just correct it without
back-porting.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All of the platform configuration data should be constant, but
that isn't the case for the memory regions, interconnects, and
clocks. Fix this.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
MII_CR_RESET mask not in use in i225 device and can be removed
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Bjarni Jonasson says:
====================
Fixes applied to VCS8584 family
Three different fixes applied to VSC8584 family:
1. LCPLL reset
2. Serdes calibration
3. Coma mode disabled
The same fixes has already been applied to VSC8514
and most of the functionality can be reused for the VSC8584.
v1 -> v2:
Preserved reversed christmas tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch releases coma mode for VSC8584 as done for VSC8514 in
commit ca0d7fd0a5 ("net: phy: mscc: coma mode disabled for VSC8514")
Fixes: a5afc16780 ("net: phy: mscc: add support for VSC8584 PHY.")
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduced 'FOJI' serdes calibration in commit 85e97f0b98
("net: phy: mscc: improved serdes calibration applied to VSC8514")
Now including the VSC8584 family.
Fixes: a5afc16780 ("net: phy: mscc: add support for VSC8584 PHY.")
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduced LCPLL reset in
commit d15e08d9fb82 ("net: phy: mscc: adding LCPLL reset to VSC8514").
Now applying this reset to the VSC8584 phy familiy.
Fixes: a5afc16780 ("net: phy: mscc: add support for VSC8584 PHY.")
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no mmu notifier or anything like that, releasing this pin is
entirely up to userspace. Hence FOLL_LONGTERM.
No cc: stable for this patch since a lot of the infrastructure around
FOLL_LONGETRM (like not allowing it for pages currently sitting in
ZONE_MOVEABLE before they're migrated) is still being worked on. So
not big benefits yet.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210301095254.1946084-2-daniel.vetter@ffwll.ch
Nothing checks userptr.ro except this call to pup_fast, which means
there's nothing actually preventing userspace from writing to this.
Which means you can just read-only mmap any file you want, userptr it
and then write to it with the gpu. Not good.
The right way to handle this is FOLL_WRITE | FOLL_FORCE, which will
break any COW mappings and update tracking for MAY_WRITE mappings so
there's no exploit and the vm isn't confused about what's going on.
For any legit use case there's no difference from what userspace can
observe and do.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: stable@vger.kernel.org
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210301095254.1946084-1-daniel.vetter@ffwll.ch
Michael reports that after the blamed patch, unbinding a VF would cause
these transactions to remain pending, and trigger some warnings with the
DMA API debug:
$ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs
pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001
fsl_enetc_vf 0000:00:01.0: Adding to iommu group 19
fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002)
fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0
$ echo 0 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs
DMA-API: pci 0000:00:01.0: device driver has pending DMA allocations while released from device [count=1]
One of leaked entries details: [size=2048 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]
WARNING: CPU: 0 PID: 2547 at kernel/dma/debug.c:853 dma_debug_device_change+0x174/0x1c8
(...)
Call trace:
dma_debug_device_change+0x174/0x1c8
blocking_notifier_call_chain+0x74/0xa8
device_release_driver_internal+0x18c/0x1f0
device_release_driver+0x20/0x30
pci_stop_bus_device+0x8c/0xe8
pci_stop_and_remove_bus_device+0x20/0x38
pci_iov_remove_virtfn+0xb8/0x128
sriov_disable+0x3c/0x110
pci_disable_sriov+0x24/0x30
enetc_sriov_configure+0x4c/0x108
sriov_numvfs_store+0x11c/0x198
(...)
DMA-API: Mapped at:
dma_entry_alloc+0xa4/0x130
debug_dma_alloc_coherent+0xbc/0x138
dma_alloc_attrs+0xa4/0x108
enetc_setup_cbdr+0x4c/0x1d0
enetc_vf_probe+0x11c/0x250
pci 0000:00:01.0: Removing from iommu group 19
This happens because stupid me moved enetc_teardown_cbdr outside of
enetc_free_si_resources, but did not bother to keep calling
enetc_teardown_cbdr from all the places where enetc_free_si_resources
was called. In particular, now it is no longer called from the main
unbind function, just from the probe error path.
Fixes: 4b47c0b81f ("net: enetc: don't initialize unused ports from a separate code path")
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
Fixes: d8ce30e0cf ("octeontx2-pf: add tc flower stats handler for hw offloads")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the lower_32_bits/upper_32_bits macros to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c: In function ‘mgmt_recv_msg_handler’:
drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c:443:18: warning: unused variable ‘pdev’ [-Wunused-variable]
443 | struct pci_dev *pdev = pf_to_mgmt->hwif->pdev;
| ^~~~
Signed-off-by: David S. Miller <davem@davemloft.net>
If the USB host controller is EHCI, the throughput is reduced from
300Mb/s to 60Mb/s, when the rx buffer size is modified from 16K to
32K.
According to the EHCI spec, the maximum size of the qTD is 20K.
Therefore, when the driver uses more than 20K buffer, the latency
time of EHCI would be increased. And, it let the RTL8153A get worse
throughput.
However, the driver uses alloc_pages() for rx buffer, so I limit
the rx buffer to 16K rather than 20K.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205923
Fixes: ec5791c202 ("r8152: separate the rx buffer size")
Reported-by: Robert Davies <robdavies1977@gmail.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daode Huang says:
====================
net: hinic; make some cleanup for hinic
This set try to remove the unnecessary output message, add a blank line,
remove the dupliate word and change the deprecated strlcp functions in
hinic driver, for details, please refer to each patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Usage of strlcpy in linux kernel has been recently
deprecated[1], so convert hinic driver to strscpy
[1] https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL
=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a duplicate "the" in the comment, so delete it.
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There should be a blank line after declarations, so just add it.
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes unnecessary out of memory message in hinic driver,
fixes the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the kernel and user space page tables are strictly mutually exclusive
when it comes to executable permissions, we can set the UXN table attribute
on all table entries that are created while creating kernel mappings in the
swapper page tables, and the PXN table attribute on all table entries that
are created while creating user space mappings in user space page tables.
While at it, get rid of a redundant comment.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210310104942.174584-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The way the arm64 kernel virtual address space is constructed guarantees
that swapper PGD entries are never shared between the linear region on
the one hand, and the vmalloc region on the other, which is where all
kernel text, module text and BPF text mappings reside.
This means that mappings in the linear region (which never require
executable permissions) never share any table entries at any level with
mappings that do require executable permissions, and so we can set the
table-level PXN attributes for all table entries that are created while
setting up mappings in the linear region. Since swapper's PGD level page
table is mapped r/o itself, this adds another layer of robustness to the
way the kernel manages its own page tables. While at it, set the UXN
attribute as well for all kernel mappings created at boot.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210310104942.174584-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
HID_THRUSTMASTER now requires USB_HID support. Reflect that dependency
in Kconfig.
Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Even though level 0, 1 and 2 descriptors share the same attribute
encodings, let's be a bit more consistent about using the right one at
the right level. So add new macros for level 0/P4D definitions, and
clean up some inconsistencies involving these macros.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210310104942.174584-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Using napi_alloc_skb in NAPI context avoids enable/disable IRQs, which
increases iperf3 result by a few Mbps. Since napi_alloc_skb() uses
NET_IP_ALIGN, convert other alloc methods to the same padding. Tested
on Intel Core2 and AMD K10 platforms.
Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- disable preemption when accessing local per-cpu variables in the new
counter set driver
- fix by a factor of four increased steal time due to missing
cputime_to_nsecs() conversion
- fix PCI device structure leak
-----BEGIN PGP SIGNATURE-----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=F2B0
-----END PGP SIGNATURE-----
Merge tag 's390-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- disable preemption when accessing local per-cpu variables in the new
counter set driver
- fix by a factor of four increased steal time due to missing
cputime_to_nsecs() conversion
- fix PCI device structure leak
* tag 's390-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix leak of PCI device structure
s390/vtime: fix increased steal time accounting
s390/cpumf: disable preemption when accessing per-cpu variable
Changing to napi_gro_receive() improves efficiency significantly. Tested
on Intel Core2-based motherboards and iperf3.
Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is what Vladimir says about it:
at803x_aneg_done() keeps the aneg reporting as "not done" even when
the copper-side link was reported as up, but the in-band autoneg has
not finished.
That was the _intended_ behavior when that code was introduced, and
Heiner have said about it [1]:
| That's not nice from the PHY:
| It signals "link up", and if the system asks the PHY for link details,
| then it sheepishly says "well, link is *almost* up".
If the specification of phy_aneg_done behavior does not include
in-band autoneg (and it doesn't), then this piece of code does not
belong here.
The fact that we can no longer trigger this code from phylib is yet
another reason why it fails at its intended (and wrong) purpose and
should be removed.
Removing the SGMII link check, would just keep the call to
genphy_aneg_done(), which is also the fallback. Thus we can just remove
at803x_aneg_done() altogether.
[1] https://lore.kernel.org/netdev/fdf0074a-2572-5914-6f3e-77202cbf96de@gmail.com/
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sk's sk_route_caps is set in sctp_packet_config, and later it
only needs to change when traversing the transport_list in a loop,
as the dst might be changed in the tx path.
So move sk_route_caps check and set into sctp_outq_flush_transports
from sctp_packet_transmit. This also fixes a dst leak reported by
Chen Yi:
https://bugzilla.kernel.org/show_bug.cgi?id=212227
As calling sk_setup_caps() in sctp_packet_transmit may also set the
sk_route_caps for the ctrl sock in a netns. When the netns is being
deleted, the ctrl sock's releasing is later than dst dev's deleting,
which will cause this dev's deleting to hang and dmesg error occurs:
unregister_netdevice: waiting for xxx to become free. Usage count = 1
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: bcd623d8e9 ("sctp: call sk_setup_caps in sctp_packet_transmit instead")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using short intervals e.g. below one millisecond, large packets won't be
transmitted at all. The software implementations checks whether the packet can
be fit into the remaining interval. Therefore, it takes the packet length and
the transmission speed into account. That is correct.
However, for large packets it may be that the transmission time exceeds the
interval resulting in no packet transmission. The same situation works fine with
hardware offloading applied.
The problem has been observed with the following schedule and iperf3:
|tc qdisc replace dev lan1 parent root handle 100 taprio \
| num_tc 8 \
| map 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 \
| queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
| base-time $base \
| sched-entry S 0x40 500000 \
| sched-entry S 0xbf 500000 \
| clockid CLOCK_TAI \
| flags 0x00
[...]
|root@tsn:~# iperf3 -c 192.168.2.105
|Connecting to host 192.168.2.105, port 5201
|[ 5] local 192.168.2.121 port 52610 connected to 192.168.2.105 port 5201
|[ ID] Interval Transfer Bitrate Retr Cwnd
|[ 5] 0.00-1.00 sec 45.2 KBytes 370 Kbits/sec 0 1.41 KBytes
|[ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 0 1.41 KBytes
After debugging, it seems that the packet length stored in the SKB is about
7000-8000 bytes. Using a 100 Mbit/s link the transmission time is about 600us
which larger than the interval of 500us.
Therefore, segment the SKB into smaller chunks if the packet is too big. This
yields similar results than the hardware offload:
|root@tsn:~# iperf3 -c 192.168.2.105
|Connecting to host 192.168.2.105, port 5201
|- - - - - - - - - - - - - - - - - - - - - - - - -
|[ ID] Interval Transfer Bitrate Retr
|[ 5] 0.00-10.00 sec 48.9 MBytes 41.0 Mbits/sec 0 sender
|[ 5] 0.00-10.02 sec 48.7 MBytes 40.7 Mbits/sec receiver
Furthermore, the segmentation can be skipped for the full offload case, as the
driver or the hardware is expected to handle this.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SGX device file (/dev/sgx_enclave) is unusual in that it requires
execute permissions. It has to be both "chmod +x" *and* be on a
filesystem without 'noexec'.
In the future, udev and systemd should get updates to set up systems
automatically. But, for now, nobody's systems do this automatically,
and everybody gets error messages like this when running ./test_sgx:
0x0000000000000000 0x0000000000002000 0x03
0x0000000000002000 0x0000000000001000 0x05
0x0000000000003000 0x0000000000003000 0x03
mmap() failed, errno=1.
That isn't very user friendly, even for forgetful kernel developers.
Further, the test case is rather haphazard about its use of fprintf()
versus perror().
Improve the error messages. Use perror() where possible. Lastly,
do some sanity checks on opening and mmap()ing the device file so
that we can get a decent error message out to the user.
Now, if your user doesn't have permission, you'll get the following:
$ ls -l /dev/sgx_enclave
crw------- 1 root root 10, 126 Mar 18 11:29 /dev/sgx_enclave
$ ./test_sgx
Unable to open /dev/sgx_enclave: Permission denied
If you then 'chown dave:dave /dev/sgx_enclave' (or whatever), but
you leave execute permissions off, you'll get:
$ ls -l /dev/sgx_enclave
crw------- 1 dave dave 10, 126 Mar 18 11:29 /dev/sgx_enclave
$ ./test_sgx
no execute permissions on device file
If you fix that with "chmod ug+x /dev/sgx" but you leave /dev as
noexec, you'll get this:
$ mount | grep "/dev .*noexec"
udev on /dev type devtmpfs (rw,nosuid,noexec,...)
$ ./test_sgx
ERROR: mmap for exec: Operation not permitted
mmap() succeeded for PROT_READ, but failed for PROT_EXEC
check that user has execute permissions on /dev/sgx_enclave and
that /dev does not have noexec set: 'mount | grep "/dev .*noexec"'
That can be fixed with:
mount -o remount,noexec /devESC
Hopefully, the combination of better error messages and the search
engines indexing this message will help people fix their systems
until we do this properly.
[ bp: Improve error messages more. ]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20210318194301.11D9A984@viggo.jf.intel.com
Background
==========
SGX enclave memory is enumerated by the processor in contiguous physical
ranges called Enclave Page Cache (EPC) sections. Currently, there is a
free list per section, but allocations simply target the lowest-numbered
sections. This is functional, but has no NUMA awareness.
Fortunately, EPC sections are covered by entries in the ACPI SRAT table.
These entries allow each EPC section to be associated with a NUMA node,
just like normal RAM.
Solution
========
Implement a NUMA-aware enclave page allocator. Mirror the buddy allocator
and maintain a list of enclave pages for each NUMA node. Attempt to
allocate enclave memory first from local nodes, then fall back to other
nodes.
Note that the fallback is not as sophisticated as the buddy allocator
and is itself not aware of NUMA distances. When a node's free list is
empty, it searches for the next-highest node with enclave pages (and
will wrap if necessary). This could be improved in the future.
Other
=====
NUMA_KEEP_MEMINFO dependency is required for phys_to_target_node().
[ Kai Huang: Do not return NULL from __sgx_alloc_epc_page() because
callers do not expect that and that leads to a NULL ptr deref. ]
[ dhansen: Fix an uninitialized 'nid' variable in
__sgx_alloc_epc_page() as
Reported-by: kernel test robot <lkp@intel.com>
to avoid any potential allocations from the wrong NUMA node or even
premature allocation failures. ]
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/lkml/158188326978.894464.217282995221175417.stgit@dwillia2-desk3.amr.corp.intel.com/
Link: https://lkml.kernel.org/r/20210319040602.178558-1-kai.huang@intel.com
Link: https://lkml.kernel.org/r/20210318214933.29341-1-dave.hansen@intel.com
Link: https://lkml.kernel.org/r/20210317235332.362001-2-jarkko.sakkinen@intel.com
After adding a verifier to test all strings printed in trace events
to make sure they either point to a string on the ring buffer,
or to read only core kernel memory, it triggered on a workqueue
trace event. The trace event workqueue_queue_work references
the allocated name of the workqueue in the output. If the workqueue
is freed before the trace is read, then the trace will dereference
freed memory. Update the trace event to use the __string(), __assign_str(),
and __get_str() helpers to handle such cases.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYFSrChQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnJpAP9XZR+/XryjQgTGmaXWeD3n2YdRmR5p
Foz5nLhURN/+KAEA8fPqLXyBGowl87twYJIFzmYAd0OtLBD3MTrTMenvCQ4=
=akct
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull workqueue tracing fix from Steven Rostedt:
"Fix workqueue trace event unsafe string reference
After adding a verifier to test all strings printed in trace events to
make sure they either point to a string on the ring buffer, or to read
only core kernel memory, it triggered on a workqueue trace event. The
trace event workqueue_queue_work references the allocated name of the
workqueue in the output. If the workqueue is freed before the trace is
read, then the trace will dereference freed memory.
Update the trace event to use the __string(), __assign_str(), and
__get_str() helpers to handle such cases"
* tag 'trace-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
workqueue/tracing: Copy workqueue name to buffer in trace event
- Revert ACPI PM commit that attempted to improve reboot handling
on some systems, but it caused other systems to panic() during
reboot (Josef Bacik).
- Revert PM-runtime commit that attempted to improve the handling
of suppliers during PM-runtime suspend of a consumer device, but
it introduced a race condition potentially leading to unexpected
behavior (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=RB5l
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Revert two problematic commits.
Specifics:
- Revert ACPI PM commit that attempted to improve reboot handling on
some systems, but it caused other systems to panic() during reboot
(Josef Bacik)
- Revert PM-runtime commit that attempted to improve the handling of
suppliers during PM-runtime suspend of a consumer device, but it
introduced a race condition potentially leading to unexpected
behavior (Rafael Wysocki)"
* tag 'pm-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PM: runtime: Update device status before letting suppliers suspend"
Revert "PM: ACPI: reboot: Use S5 for reboot"
Including:
- Three AMD IOMMU patches to fix a boot crash on AMD Stoney
systems and every other AMD IOMMU system booted with
'amd_iommu=off'. This is a v5.11 regression.
- A Fix for the Tegra IOMMU driver to make sure it detects all
IOMMUs
-----BEGIN PGP SIGNATURE-----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=PJvl
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Three AMD IOMMU patches to fix a boot crash on AMD Stoney systems and
every other AMD IOMMU system booted with 'amd_iommu=off'.
This is a v5.11 regression.
- A Fix for the Tegra IOMMU driver to make sure it detects all IOMMUs
* tag 'iommu-fixes-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/tegra-smmu: Make tegra_smmu_probe_device() to handle all IOMMU phandles
iommu/amd: Keep track of amd_iommu_irq_remap state
iommu/amd: Don't call early_amd_iommu_init() when AMD IOMMU is disabled
iommu/amd: Move Stoney Ridge check to detect_ivrs()