Tegra20 AC97 driver doesn't manage the AC97 controller reset, relying on
implicit deassertion of the reset by tegra-clk driver, which needs to be
fixed since this behaviour is unacceptable by other Tegra drivers. Add
explicit reset control to the Tegra20 AC97 driver.
Note that AC97 reset was always specified in Tegra20 device-tree, hence
DTB ABI changes aren't required.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rationale for this change is roughly as follows:
1. The functionality can be done entirely in userspace with a
combination of mmap + memcpy
2. The only reason anyone in userspace is still using it is because
someone implemented bo_subdata that way in libdrm ages ago and
they're all too lazy to write the 5 lines of code to do a map.
3. This falls cleanly into the category of things which will only get
more painful with local memory support.
These ioctls aren't used much anymore by "real" userspace drivers.
Vulkan has never used them and neither has the iris GL driver. The old
i965 GL driver does use PWRITE for glBufferSubData but it only supports
up through Gen11; Gen12 was never enabled in i965. The compute driver
has never used PREAD/PWRITE. The only remaining user is the media
driver which uses it exactly twice and they're easily removed [1] so
expecting them to drop it going forward is reasonable.
IGT changes which handle this kernel change have also been submitted [2].
[1] https://github.com/intel/media-driver/pull/1160
[2] https://patchwork.freedesktop.org/series/81384/
v2 (Jason Ekstrand):
- Improved commit message with the status of all usermode drivers
- A more future-proof platform check
v3 (Jason Ekstrand):
- Drop the HAS_LMEM checks as they're already covered by the version
checks
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-4-jason@jlekstrand.net
The Vulkan driver in Mesa for Intel hardware never uses relocations if
it's running on a version of i915 that supports at least softpin which
all versions of i915 supporting Gen12 do. On the OpenGL side, Gen12+ is
only supported by iris which never uses relocations. The older i965
driver in Mesa does use relocations but it only supports Intel hardware
through Gen11 and has been deprecated for all hardware Gen9+. The
compute driver also never uses relocations. This only leaves the media
driver which is supposed to be switching to softpin going forward.
Making softpin a requirement for all future hardware seems reasonable.
There is one piece of hardware enabled by default in i915: RKL which was
enabled by e22fa6f0a9 which has not yet landed in drm-next so this
almost but not really a userspace API change for RKL. If it becomes a
problem, we can always add !IS_ROCKETLAKE(eb->i915) to the condition.
Rejecting relocations starting with newer Gen12 platforms has the
benefit that we don't have to bother supporting it on platforms with
local memory. Given how much CPU touching of memory is required for
relocations, not having to do so on platforms where not all memory is
directly CPU-accessible carries significant advantages.
v2 (Jason Ekstrand):
- Allow TGL-LP platforms as they've already shipped
v3 (Jason Ekstrand):
- WARN_ON platforms with LMEM support in case the check is wrong
v4 (Jason Ekstrand):
- Call out Rocket Lake in the commit message
v5 (Jason Ekstrand):
- Drop the HAS_LMEM check as it's already covered by the version check
v6 (Jason Ekstrand):
- Move the check to eb_validate_vma() with all the other exec_object
validation checks.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-3-jason@jlekstrand.net
libdrm has supported the newer execbuffer2 ioctl and using it by default
when it exists since libdrm commit b50964027bef which landed Mar 2, 2010.
The i915 and i965 drivers in Mesa at the time both used libdrm and so
did the Intel X11 back-end. The SNA back-end for X11 has always used
execbuffer2.
v2 (Jason Ekstrand):
- Add a comment saying what Linux version it's being removed in.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Keith Packard <keithp@keithp.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-2-jason@jlekstrand.net
The shifting of the u8 integer device by 24 bits to the left will
be promoted to a 32 bit signed int and then sign-extended to a
64 bit unsigned long. In the event that the top bit of device is
set then all then all the upper 32 bits of the unsigned long will
end up as also being set because of the sign-extension. Fix this
by casting device to an unsigned long before the shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: a07df82c79 ("ALSA: usb-audio: Add DJM750 to Pioneer mixer quirk")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210318132008.15266-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a lot of mostly platform specific fixes here, the only one which
is generic is a fix for regressions on devices with more complex
clocking support with simple-card. There's also a few new device IDs
and platform quirks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBSCQ0ACgkQJNaLcl1U
h9BBqAf+IzAw12qnAnV/XoGm+qzbrp6s8jzLCvuRVqBR9tFpADJ6MAjqCe/YQJDS
PNw7VQIYv2/f5CUEYBEDw5dPbEv6VOsv34Ffu/bqBpjVpXcHfm1W55rdXnchmjlk
Yv93yNf2IrY7cxkQS+c7DsUykwL9Wf+zNN+PkFXrfss6rweaQIB+Hzw8/JD7+hoZ
8i02merXWjOv+i2KaubWrg7IvN+nv55GvxcTIFhf/fauvR+tUNoF7GO6JnS2EWof
kwJSnuLe2Z1RgCGfxdOeJJ3yje27iYp3g42Ctdx3MU8QdJm9GaqezFJFMxg4VUhB
mgWwHHeLbDFxU1eXetCAnTYUPbRJeg==
=x5xY
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.12-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.12
Quite a lot of mostly platform specific fixes here, the only one which
is generic is a fix for regressions on devices with more complex
clocking support with simple-card. There's also a few new device IDs
and platform quirks.
Q6 based WiFi fw loading is supported across
different targets, ex: IPQ8074/QCS404. In order to
support different fw names/pas id etc, populate
hardcoded param using driver data.
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Link: https://lore.kernel.org/r/1611859695-11824-2-git-send-email-gokulsri@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Refactor function rproc_cdev_release() to take into account the
current state of the remote processor when choosing the state to
transition to.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210312162453.1234145-18-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch introduces the capability to detach a remote processor
that has been attached to by the remoteproc core. For that to happen
a rproc::ops::detach() operation needs to be available.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-17-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Allow a remote processor that was started by another entity to be
switched off by the remoteproc core. For that to happen a
rproc::ops::stop() operation needs to be available.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-16-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch takes into account scenarios where a remote processor
has been attached to when receiving a "start" command from sysfs.
As with the case with the running state, the command can't be
carried out if the remote processor is already in operation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-15-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The panic handler operation of registered remote processors
should also be called when remote processors have been
attached to.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-14-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When a remote processor that was attached to is stopped, special care
must be taken to make sure the shutdown process is similar to what
it would be had it been started by the remoteproc core.
This patch takes care of that by making a copy of the resource
table currently used by the remote processor. From that point on
the copy is used, as if the remote processor had been started by
the remoteproc core.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-13-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
If it is possible to detach the remote processor, keep an untouched
copy of the resource table. That way we can start from the same
resource table without having to worry about original values or what
elements the startup code has changed when re-attaching to the remote
processor.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-12-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce function rproc_detach() to enable the remoteproc
core to release the resources associated with a remote processor
without stopping its operation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-11-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce function __rproc_detach() to perform the same kind of
operation as rproc_stop(), but instead of switching off the
remote processor using rproc->ops->stop(), it uses
rproc->ops->detach(). That way it is possible for the core
to release the resources associated with a remote processor while
the latter is kept operating.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-10-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add an new detach() operation in order to support scenarios where
the remoteproc core is going away but the remote processor is
kept operating. This could be the case when the system is
rebooted or when the platform driver is removed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-9-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Some actions such as memory resources reallocation are needed when
trying to reattach a co-processor. Use the prepare() operation for
these actions.
Co-developed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud POULIQUEN <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-8-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move the setting of the resource table installed by an external
entity to rproc_ops::get_loaded_rsc_table(). This is to support
scenarios where a remote processor has been attached to but is
detached at a later stage. To re-attach the remote processor,
the address of the resource table needs to be available
at a later time than the platform driver's probe() function.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-7-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it. When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-6-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There is a need to know when a remote processor has been attached
to rather than booted by the remoteproc core. In order to avoid
manipulating two variables, i.e rproc::autonomous and
rproc::state, get rid of the former and simply use the newly
introduced RPROC_ATTACHED state.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-5-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add a new RPROC_ATTACHED state to take into account scenarios
where the remoteproc core needs to attach to a remote processor
that is booted by another entity.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-4-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rename function rproc_actuate() to rproc_attach(). That way it is
easy to understand that it does the opposite of rproc_detach().
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-3-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Whether started at probe() time or thereafter from the command
line, a remote processor needs to be shut down before the final
cleanup phases can happen. Otherwise the system may be left in
an unpredictable state where the remote processor is expecting
the remoteproc core to be providing services when in fact it
no longer exist.
Invariably calling rproc_shutdown() is fine since it will return
immediately if the remote processor has already been switched
off.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-2-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Analog to the issue in the common mdt_loader code the MSS ELF loader
does not validate that p_filesz bytes will fit in the memory region and
that the loaded segments are not truncated. Fix this in the same way
as proposed for the mdt_loader.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 135b9e8d1c ("remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load")
Link: https://lore.kernel.org/r/20210312232002.3466791-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Failing to read the "firmware-name" DT property without informing the
developer is annoying, add some helpful debug prints.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210312002605.3273255-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add intel_bios_encoder_data pointer to encoder, and use it for hdmi and
dp iboost. For starters, we only set the encoder->devdata for DDI
encoders, i.e. we can only use it for data that is used by DDI encoders.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4bc49244ce68e136e5b21db4c4e6554bec9ac0fb.1615998927.git.jani.nikula@intel.com
Stop caching the information in ddi_port_info. We're phasing out
ddi_port_info usage completely, and prefer using the VBT child device
information directly using the provided helpers.
v2:
- Remove supports_typec_usb & supports_tbt from ddi_vbt_port_info (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b04bd183e7554aeb4bc3962af90d63171aa32fc2.1615998927.git.jani.nikula@intel.com
Start using struct intel_bios_encoder_data directly. We'll start
sanitizing the child device data directly as well, instead of the cached
data in ddi_port_info[]. The one downside here is having to store a
non-const pointer back to intel_bios_encoder_data.
Eventually we'll be able to have a direct pointer from encoder to
intel_bios_encoder_data, removing the need to go through the
ddi_port_info[] array altogether. And we'll be able to remove all the
cached data in ddi_port_info[].
v2:
- Remove supports_dp and supports_edp from ddi_port_info too
- Add devdata != NULL check in intel_bios_is_port_edp()
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/061df32a012ff640060920fcd730fb23f8717ee8.1615998927.git.jani.nikula@intel.com
These will be exposed to the rest of the driver and replace other
functions. Everything will operate on the child devices.
v2:
- Rebased, removed stray blank line
- Also abstracted intel_bios_encoder_supports_crt (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2bd40ccc093796d16300742d1789d78ffac3c450.1615998927.git.jani.nikula@intel.com
Instead of initialing data directly in ddi_port_info array, create fake
child devices for default outputs when the VBT is missing. This makes
further unification of output handling easier.
This will make intel_bios_is_port_present() return true for the fake
child devices. This may cause subtle changes in a handful of places.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/91675b40a78bd04bf138598d979661257181880d.1615998927.git.jani.nikula@intel.com
There are two main cases where the default outputs are useful when the
VBT is missing:
- There are some DDI-platform Chromebooks out there that do not have a
VBT, which worked by coincidence because of the default outputs. The
machines need to continue to work.
- Early platform enabling when the VBT might not be available. (This
could be circumvented by using the i915.vbt_firmware parameter.)
Prepare for generating fake child devices for the default outputs by
limiting the number of outputs. We don't want to generate excessive
amounts of fake child devices. This could be perhaps be limited even
more in the future, but match what's possible on all DDI platforms.
Note that limiting the defaults to non-TypeC ports in commit
828ccb31cf ("drm/i915/icl: Add TypeC ports only if VBT is present") is
a more strict limit, and makes this a no-op on recent platforms.
v2: Rewrote commit message
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c9c9743af1c7265a2c976d582b7a6685ec0c414.1615998927.git.jani.nikula@intel.com
Pre-DDI and non-CHV aren't using the information created here anyway, so
don't bother setting the defaults for them. This should be a
non-functional change, but is separated here to catch any regressions in
a single commit.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41526a4eee5fb0de8d7f1ffe4c09965b63ccbaa8.1615998927.git.jani.nikula@intel.com
Lenovo platforms with DYTC versions earlier than version 5 don't set
the lapmode interface correctly, causing issues with thermald on
older platforms.
Add checking to only create the dytc_lapmode interface for version
5 and later.
Fixes: 1ac09656bd ("platform/x86: thinkpad_acpi: Add palm sensor support")
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210311174843.3161-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Lenovo platforms with DYTC versions earlier than version 5 don't set
the lapmode interface correctly, causing issues with thermald on
older platforms.
Add checking to only create the dytc_lapmode interface for version
5 and later.
Fixes: 1ac09656bd ("platform/x86: thinkpad_acpi: Add palm sensor support")
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20210311174843.3161-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When guest opts for re-enlightenment notifications upon migration, it is
in its right to assume that TSC page values never change (as they're only
supposed to change upon migration and the host has to keep things as they
are before it receives confirmation from the guest). This is mostly true
until the guest is migrated somewhere. KVM userspace (e.g. QEMU) will
trigger masterclock update by writing to HV_X64_MSR_REFERENCE_TSC, by
calling KVM_SET_CLOCK,... and as TSC value and kvmclock reading drift
apart (even slightly), the update causes TSC page values to change.
The issue at hand is that when Hyper-V is migrated, it uses stale (cached)
TSC page values to compute the difference between its own clocksource
(provided by KVM) and its guests' TSC pages to program synthetic timers
and in some cases, when TSC page is updated, this puts all stimer
expirations in the past. This, in its turn, causes an interrupt storm
and L2 guests not making much forward progress.
Note, KVM doesn't fully implement re-enlightenment notification. Basically,
the support for reenlightenment MSRs is just a stub and userspace is only
expected to expose the feature when TSC scaling on the expected destination
hosts is available. With TSC scaling, no real re-enlightenment is needed
as TSC frequency doesn't change. With TSC scaling becoming ubiquitous, it
likely makes little sense to fully implement re-enlightenment in KVM.
Prevent TSC page from being updated after migration. In case it's not the
guest who's initiating the change and when TSC page is already enabled,
just keep it as it is: TSC value is supposed to be preserved across
migration and TSC frequency can't change with re-enlightenment enabled.
The guest is doomed anyway if any of this is not true.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create an infrastructure for tracking Hyper-V TSC page status, i.e. if it
was updated from guest/host side or if we've failed to set it up (because
e.g. guest wrote some garbage to HV_X64_MSR_REFERENCE_TSC) and there's no
need to retry.
Also, in a hypothetical situation when we are in 'always catchup' mode for
TSC we can now avoid contending 'hv->hv_lock' on every guest enter by
setting the state to HV_TSC_PAGE_BROKEN after compute_tsc_page_parameters()
returns false.
Check for HV_TSC_PAGE_SET state instead of '!hv->tsc_ref.tsc_sequence' in
get_time_ref_counter() to properly handle the situation when we failed to
write the updated TSC page values to the guest.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210316143736.964151-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The jack handling for arizona codecs is being refactored so that it is
done directly by the codec drivers, instead of having an extcon-driver
bind to a separate "arizona-extcon" child-device for this.
drivers/mfd/arizona-core.c has already been updated to no longer
instantiate an "arizona-extcon" child-device for the arizona codecs.
This means that the "arizona-extcon" driver is no longer useful
(there are no longer any devices for it to bind to).
This commit drops the extcon Kconfig / Makefile bits and moves
drivers/extcon/extcon-arizona.c to sound/soc/codecs/arizona-jack.c .
This is a preparation patch for converting the arizona extcon-driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Before this commit the extcon-arizona code was mixing pm_runtime_get()
and pm_runtime_get_sync() in different places.
In all places where pm_runtime_get[_sync]() is called, the code
makes use of the device immediately after the call.
This means that we should always use pm_runtime_get_sync().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>