Commit graph

1,014,740 commits

Author SHA1 Message Date
Ido Schimmel
6561df5608 mlxsw: spectrum_matchall: Propagate extack further
Due to the differences between Spectrum-1 and later ASICs, some of the
checks currently performed at the common code (where extack is
available) will need to be pushed to the per-ASIC operations.

As a preparation, propagate extack further to maintain proper error
reporting.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:32:22 -07:00
David S. Miller
5bdbdb823f Merge branch 'dpaa2-switch-small-cleanup'
Ioana Ciornei says:

====================
dpaa2-switch: small cleanup

This patch set addresses various low-hanging issues in both dpaa2-switch
and dpaa2-eth drivers.
Unused ABI functions are removed from dpaa2-switch, all the kernel-doc
warnings are fixed up in both drivers and the coding style for the
remaining ABIs is fixed-up a bit.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:29:49 -07:00
Ioana Ciornei
4fe72de61e dpaa2-eth: fixup kdoc warnings
Running kernel-doc over the dpaa2-eth driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory, respecting the kdoc format for macro documentation and
other small changes like describing the expected return values of
functions.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:29:49 -07:00
Ioana Ciornei
5ac2d25438 dpaa2-switch: fit the function declaration on the same line
Multiple ABI function declarations are split unnecessarry on multiple
lines. Fix this so that we have a consistent coding style.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:29:49 -07:00
Ioana Ciornei
2b7e3f7d1b dpaa2-switch: reduce the size of the if_id bitmap to 64 bits
The maximum number of DPAA2 switch interfaces, including the control
interface, is 64. Even though this restriction existed from the first
place, the command structures which use an interface id bitmap were
poorly described and even though a single uint64_t is enough, all of
them used an array of 4 uint64_t's.
Fix this by reducing the size of the interface id field to a single
uint64_t.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:29:49 -07:00
Ioana Ciornei
05b363608b dpaa2-switch: fix kdoc warnings
Running kernel-doc over the dpaa2-switch driver generates a bunch of
warnings. Fix them up by removing code comments for macros which are
self-explanatory and adding a bit more context for the
dpsw_if_get_port_mac_addr() function and the fields of the
dpsw_vlan_if_cfg structure.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:29:48 -07:00
Ioana Ciornei
cba0445633 dpaa2-switch: remove unused ABI functions
Cleanup the dpaa2-switch driver a bit by removing any unused MC firmware
ABI definitions.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:29:48 -07:00
Geert Uytterhoeven
a3bc483216 net: broadcom: BCM4908_ENET should not default to y, unconditionally
Merely enabling compile-testing should not enable additional code.
To fix this, restrict the automatic enabling of BCM4908_ENET to
ARCH_BCM4908.

Fixes: 4feffeadbc ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:26:31 -07:00
Zihao Tang
91306d1d13 net: ipa: Remove useless error message
Fix the following coccicheck report:

drivers/net/ipa/gsi.c:1341:2-9:
line 1341 is redundant because platform_get_irq() already prints an error

Remove dev_err() messages after platform_get_irq_byname() failures.

Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:23:20 -07:00
wenxu
d29334c15d net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct
When openvswitch conntrack offload with act_ct action. The first rule
do conntrack in the act_ct in tc subsystem. And miss the next rule in
the tc and fallback to the ovs datapath but miss set post_ct flag
which will lead the ct_state_key with -trk flag.

Fixes: 7baf2429a1 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:22:18 -07:00
David S. Miller
51481c51d3 Merge branch 'switchdev-dsa-docs'
Vladimir Oltean says:

====================
Documentation updates for switchdev and DSA

Many changes were made to the code but of course the documentation was
not kept up to date. This is an attempt to update some of the verbiage.

The documentation is still not complete, but it's time to make some more
changes to the code first, before documenting the rest.

Changes in v2:
Integrated feedback from Andrew, Florian, Tobias, Ido, George.
====================

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:45 -07:00
Vladimir Oltean
787a4109f4 Documentation: networking: switchdev: fix command for static FDB entries
The "bridge fdb add" command provided in the switchdev documentation is
junk now, not only because it is syntactically incorrect and rejected by
the iproute2 bridge program, but also because it was not updated in
light of Arkadi Sharshevsky's radical switchdev refactoring in commit
29ab586c3d ("net: switchdev: Remove bridge bypass support from
switchdev"). Try to explain what the intended usage pattern is with the
new kernel implementation.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:45 -07:00
Florian Fainelli
0f22ad45f4 Documentation: networking: switchdev: clarify device driver behavior
This patch provides details on the expected behavior of switchdev
enabled network devices when operating in a "stand alone" mode, as well
as when being bridge members. This clarifies a number of things that
recently came up during a bug fixing session on the b53 DSA switch
driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:45 -07:00
Vladimir Oltean
6e9530f4c0 Documentation: networking: dsa: add paragraph for the HSR/PRP offload
Add a short summary of the methods that a driver writer must implement
for offloading a HSR/PRP network interface.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:45 -07:00
Vladimir Oltean
f8f3c20af1 Documentation: networking: dsa: add paragraph for the MRP offload
Add a short summary of the methods that a driver writer must implement
for getting an MRP instance to work on top of a DSA switch.

Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
a9985444f2 Documentation: networking: dsa: add paragraph for the LAG offload
Add a short summary of the methods that a driver writer must implement
for offloading a link aggregation group, and what is still missing.

Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
8411abbcad Documentation: networking: dsa: mention integration with devlink
Add a short summary of the devlink features supported by the DSA core.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
5a275f4c29 Documentation: networking: dsa: document the port_bridge_flags method
The documentation was already lagging behind by not mentioning the old
version of port_bridge_flags (port_set_egress_floods). So now we are
skipping one step and just explaining how a DSA driver should configure
address learning and flooding settings.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
f4b5c53a03 Documentation: networking: dsa: remove TODO about porting more vendor drivers
On one hand, the link is dead and therefore useless.

On the other hand, there are always more drivers to port, but at this
stage, DSA does not need to affirm itself as the driver model to use for
Ethernet-connected switches (since we already have 15 tagging protocols
supported and probably more switch families from various vendors), so
there is nothing actionable to do.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
f884399185 Documentation: networking: dsa: remove references to switchdev prepare/commit
After the recent series containing commit bae33f2b5a ("net: switchdev:
remove the transaction structure from port attributes"), there aren't
prepare/commit transactional phases anymore in most of the switchdev
objects/attributes, and as a result, there aren't any in the DSA driver
API either. So remove this piece.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
f23f1404eb Documentation: networking: dsa: remove static port count from limitations
After Vivien's series from 2019 containing commits 27d4d19d7c ("net:
dsa: remove limitation of switch index value") and ab8ccae122 ("net:
dsa: add ports list in the switch fabric"), this is basically no longer
true.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
7714ee152c Documentation: networking: dsa: rewrite chapter about tagging protocol
The chapter about tagging protocols is out of date because it doesn't
mention all taggers that have been added since last documentation
update. But judging based on that, it will always tend to lag behind,
and there's no good reason why we would enumerate the supported
hardware. Instead we could do something more useful and explain what
there is to know about tagging protocols instead.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
Vladimir Oltean
0f45537105 Documentation: networking: update the graphical representation
While preparing some slides for a customer presentation, I found the
existing high-level view to be a bit confusing, so I modified it a
little bit.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:13:44 -07:00
David S. Miller
ce225298a0 linux-can-fixes-for-5.12-20210316
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmBQZbwTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCpyVqK+u3vqbaXCACCWiOBmQDBUCrybeI/t5UVpAW1s1FR
 cRxF5NqqJJrE0YNmS0OJf58o96OoqBQsjtTeynk4a8CtjnQ73TrLJXCxvAN0/QON
 xhNzb6NHVsAPRxnsh9Ov0sHYYL4aCzYOw9Y9PcII4pYmlYJkA9HUl2DwjWfUGWtM
 rg/V8gGk8HNIKZcYySixNDWdycI4UpMFWkfJcWMmcWfQM+SlQD28ZZRajHKVOVL+
 dtPVFFxgjZCaOaB1FGCZ1bgeNTYUlkmj4O19tPHxc73oqjBDjMw4g/QouMtabaXu
 27aFoKanC8pTOQ8WHGbqtj44r2uTcgAsmSmZ3BHvlct4C6PSO2gd0P73
 =gQmn
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-5.12-20210316' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-03-16

this is a pull request of 11 patches for net/master.

The first patch is by Martin Willi and fixes the deletion of network
name spaces with physical CAN interfaces in them.

The next two patches are by me an fix the ISOTP protocol, to ensure
that unused flags in classical CAN frames are properly initialized to
zero.

Stephane Grosjean contributes a patch for the pcan_usb_fd driver,
which add MODULE_SUPPORTED_DEVICE lines for two supported devices.

Angelo Dureghello's patch for the flexcan driver fixes a potential div
by zero, if the bitrate is not set during driver probe.

Jimmy Assarsson's patch for the kvaser_pciefd disables bus load
reporting in the device, if it was previously enabled by the vendor's
out of tree drier. A patch for the kvaser_usb adds support for a new
device, by adding the appropriate USB product ID.

Tong Zhang contributes two patches for the c_can driver. First a
use-after-free in the c_can_pci driver is fixed, in the second patch
the runtime PM for the c_can_pci is fixed by moving the runtime PM
enable/disable from the core driver to the platform driver.

The last two patches are by Torin Cooper-Bennun for the m_can driver.
First a extraneous msg loss warning is removed then he fixes the
RX-path, which might be blocked by errors.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:10:43 -07:00
Zenghui Yu
8a4452ca29 docs: net: ena: Fix ena_start_xmit() function name typo
The ena.rst documentation referred to end_start_xmit() when it should refer
to ena_start_xmit(). Fix the typo.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:06:04 -07:00
David S. Miller
52280f60c9 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-03-15

This series contains updates to e1000e only.

Chen Yu says:

The NIC is put in runtime suspend status when there is no cable connected.
As a result, it is safe to keep non-wakeup NIC in runtime suspended during
s2ram because the system does not rely on the NIC plug event nor WoL to
wake up the system. Besides that, unlike the s2idle, s2ram does not need to
manipulate S0ix settings during suspend.
====================

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:04:30 -07:00
Carlos Llamas
81f711d67a selftests/net: fix warnings on reuseaddr_ports_exhausted
Fix multiple warnings seen with gcc 10.2.1:
reuseaddr_ports_exhausted.c:32:41: warning: missing braces around initializer [-Wmissing-braces]
   32 | struct reuse_opts unreusable_opts[12] = {
      |                                         ^
   33 |  {0, 0, 0, 0},
      |   {   } {   }

Fixes: 7f204a7de8 ("selftests: net: Add SO_REUSEADDR test to check if 4-tuples are fully utilized.")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 15:01:21 -07:00
Paul Cercueil
3f6c515d72 MIPS: vmlinux.lds.S: Fix appended dtb not properly aligned
Commit 6654111c89 ("MIPS: vmlinux.lds.S: align raw appended dtb to 8
bytes") changed the alignment from STRUCT_ALIGNMENT bytes to 8 bytes.

The commit's message makes it sound like it was actually done on
purpose, but this is not the case. The commit was written when raw
appended dtb were not aligned at all. The STRUCT_ALIGN() was added a few
days before, in commit 7a05293af3 ("MIPS: boot/compressed: Copy DTB to
aligned address"). The true purpose of the commit was not to align
specifically to 8 bytes, but to make sure that the generated vmlinux'
size was properly padded to the alignment required for DTBs.

While the switch to 8-byte alignment worked for vmlinux-appended dtb
blobs, it broke vmlinuz-appended dtb blobs, as the decompress routine
moves the blob to a STRUCT_ALIGNMENT aligned address.

Fix this by changing the raw appended dtb blob alignment from 8 bytes
back to STRUCT_ALIGNMENT bytes in vmlinux.lds.S.

Fixes: 6654111c89 ("MIPS: vmlinux.lds.S: align raw appended dtb to 8 bytes")
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-16 22:53:08 +01:00
Yejune Deng
f105f26e45 net: ipv4: route.c: simplify procfs code
proc_creat_seq() that directly take a struct seq_operations,
and deal with network namespaces in ->open.

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16 14:43:49 -07:00
Oleg Nesterov
b2e9df850c x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
Save the current_thread_info()->status of X86 in the new
restart_block->arch_data field so TS_COMPAT_RESTART can be removed again.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210201174716.GA17898@redhat.com
2021-03-16 22:13:11 +01:00
Oleg Nesterov
8c150ba2fb x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
The comment in get_nr_restart_syscall() says:

	 * The problem is that we can get here when ptrace pokes
	 * syscall-like values into regs even if we're not in a syscall
	 * at all.

Yes, but if not in a syscall then the

	status & (TS_COMPAT|TS_I386_REGS_POKED)

check below can't really help:

	- TS_COMPAT can't be set

	- TS_I386_REGS_POKED is only set if regs->orig_ax was changed by
	  32bit debugger; and even in this case get_nr_restart_syscall()
	  is only correct if the tracee is 32bit too.

Suppose that a 64bit debugger plays with a 32bit tracee and

	* Tracee calls sleep(2)	// TS_COMPAT is set
	* User interrupts the tracee by CTRL-C after 1 sec and does
	  "(gdb) call func()"
	* gdb saves the regs by PTRACE_GETREGS
	* does PTRACE_SETREGS to set %rip='func' and %orig_rax=-1
	* PTRACE_CONT		// TS_COMPAT is cleared
	* func() hits int3.
	* Debugger catches SIGTRAP.
	* Restore original regs by PTRACE_SETREGS.
	* PTRACE_CONT

get_nr_restart_syscall() wrongly returns __NR_restart_syscall==219, the
tracee calls ia32_sys_call_table[219] == sys_madvise.

Add the sticky TS_COMPAT_RESTART flag which survives after return to user
mode. It's going to be removed in the next step again by storing the
information in the restart block. As a further cleanup it might be possible
to remove also TS_I386_REGS_POKED with that.

Test-case:

  $ cvs -d :pserver:anoncvs:anoncvs@sourceware.org:/cvs/systemtap co ptrace-tests
  $ gcc -o erestartsys-trap-debuggee ptrace-tests/tests/erestartsys-trap-debuggee.c --m32
  $ gcc -o erestartsys-trap-debugger ptrace-tests/tests/erestartsys-trap-debugger.c -lutil
  $ ./erestartsys-trap-debugger
  Unexpected: retval 1, errno 22
  erestartsys-trap-debugger: ptrace-tests/tests/erestartsys-trap-debugger.c:421

Fixes: 609c19a385 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174709.GA17895@redhat.com
2021-03-16 22:13:11 +01:00
Oleg Nesterov
66c1b6d74c x86: Move TS_COMPAT back to asm/thread_info.h
Move TS_COMPAT back to asm/thread_info.h, close to TS_I386_REGS_POKED.

It was moved to asm/processor.h by b9d989c721 ("x86/asm: Move the
thread_info::status field to thread_struct"), then later 37a8f7c383
("x86/asm: Move 'status' from thread_struct to thread_info") moved the
'status' field back but TS_COMPAT was forgotten.

Preparatory patch to fix the COMPAT case for get_nr_restart_syscall()

Fixes: 609c19a385 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174649.GA17880@redhat.com
2021-03-16 22:13:11 +01:00
Oleg Nesterov
5abbe51a52 kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.

Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.

Fixes: 609c19a385 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
2021-03-16 22:13:10 +01:00
Ondrej Mosnacek
08ef1af4de perf/core: Fix unconditional security_locked_down() call
Currently, the lockdown state is queried unconditionally, even though
its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in
attr.sample_type. While that doesn't matter in case of the Lockdown LSM,
it causes trouble with the SELinux's lockdown hook implementation.

SELinux implements the locked_down hook with a check whether the current
task's type has the corresponding "lockdown" class permission
("integrity" or "confidentiality") allowed in the policy. This means
that calling the hook when the access control decision would be ignored
generates a bogus permission check and audit record.

Fix this by checking sample_type first and only calling the hook when
its result would be honored.

Fixes: b0c8fdc7fd ("lockdown: Lock down perf when in confidentiality mode")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lkml.kernel.org/r/20210224215628.192519-1-omosnace@redhat.com
2021-03-16 21:44:43 +01:00
Namhyung Kim
ff65338e78 perf core: Allocate perf_event in the target node memory
For cpu events, it'd better allocating them in the corresponding node
memory as they would be mostly accessed by the target cpu.  Although
perf tools sets the cpu affinity before calling perf_event_open, there
are places it doesn't (notably perf record) and we should consider
other external users too.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-2-namhyung@kernel.org
2021-03-16 21:44:43 +01:00
Namhyung Kim
bdacfaf26d perf core: Add a kmem_cache for struct perf_event
The kernel can allocate a lot of struct perf_event when profiling. For
example, 256 cpu x 8 events x 20 cgroups = 40K instances of the struct
would be allocated on a large system.

The size of struct perf_event in my setup is 1152 byte. As it's
allocated by kmalloc, the actual allocation size would be rounded up
to 2K.

Then there's 896 byte (~43%) of waste per instance resulting in total
~35MB with 40K instances. We can create a dedicated kmem_cache to
avoid such a big unnecessary memory consumption.

With this change, I can see below (note this machine has 112 cpus).

  # grep perf_event /proc/slabinfo
  perf_event    224    784   1152    7    2 : tunables   24   12    8 : slabdata    112    112      0

The sixth column is pages-per-slab which is 2, and the fifth column is
obj-per-slab which is 7.  Thus actually it can use 1152 x 7 = 8064
byte in the 8K, and wasted memory is (8192 - 8064) / 7 = ~18 byte per
instance.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-1-namhyung@kernel.org
2021-03-16 21:44:42 +01:00
Namhyung Kim
9483409ab5 perf core: Allocate perf_buffer in the target node memory
I found the ring buffer pages are allocated in the node but the ring
buffer itself is not.  Let's convert it to use kzalloc_node() too.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210315033436.682438-1-namhyung@kernel.org
2021-03-16 21:44:42 +01:00
Kan Liang
2dc0572f2c perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT
On a Haswell machine, the perf_fuzzer managed to trigger this message:

[117248.075892] unchecked MSR access error: WRMSR to 0x3f1 (tried to
write 0x0400000000000000) at rIP: 0xffffffff8106e4f4
(native_write_msr+0x4/0x20)
[117248.089957] Call Trace:
[117248.092685]  intel_pmu_pebs_enable_all+0x31/0x40
[117248.097737]  intel_pmu_enable_all+0xa/0x10
[117248.102210]  __perf_event_task_sched_in+0x2df/0x2f0
[117248.107511]  finish_task_switch.isra.0+0x15f/0x280
[117248.112765]  schedule_tail+0xc/0x40
[117248.116562]  ret_from_fork+0x8/0x30

A fake event called VLBR_EVENT may use the bit 58 of the PEBS_ENABLE, if
the precise_ip is set. The bit 58 is reserved by the HW. Accessing the
bit causes the unchecked MSR access error.

The fake event doesn't support PEBS. The case should be rejected.

Fixes: 097e4311cd ("perf/x86: Add constraint to create guest LBR event without hw counter")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1615555298-140216-2-git-send-email-kan.liang@linux.intel.com
2021-03-16 21:44:39 +01:00
Kan Liang
d88d05a9e0 perf/x86/intel: Fix a crash caused by zero PEBS status
A repeatable crash can be triggered by the perf_fuzzer on some Haswell
system.
https://lore.kernel.org/lkml/7170d3b-c17f-1ded-52aa-cc6d9ae999f4@maine.edu/

For some old CPUs (HSW and earlier), the PEBS status in a PEBS record
may be mistakenly set to 0. To minimize the impact of the defect, the
commit was introduced to try to avoid dropping the PEBS record for some
cases. It adds a check in the intel_pmu_drain_pebs_nhm(), and updates
the local pebs_status accordingly. However, it doesn't correct the PEBS
status in the PEBS record, which may trigger the crash, especially for
the large PEBS.

It's possible that all the PEBS records in a large PEBS have the PEBS
status 0. If so, the first get_next_pebs_record_by_bit() in the
__intel_pmu_pebs_event() returns NULL. The at = NULL. Since it's a large
PEBS, the 'count' parameter must > 1. The second
get_next_pebs_record_by_bit() will crash.

Besides the local pebs_status, correct the PEBS status in the PEBS
record as well.

Fixes: 01330d7288 ("perf/x86: Allow zero PEBS status with only single active event")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1615555298-140216-1-git-send-email-kan.liang@linux.intel.com
2021-03-16 21:44:39 +01:00
Jarod Wilson
239729a21e wireless/nl80211: fix wdev_id may be used uninitialized
Build currently fails with -Werror=maybe-uninitialized set:

net/wireless/nl80211.c: In function '__cfg80211_wdev_from_attrs':
net/wireless/nl80211.c:124:44: error: 'wdev_id' may be used
uninitialized in this function [-Werror=maybe-uninitialized]

Easy fix is to just initialize wdev_id to 0, since it's value doesn't
otherwise matter unless have_wdev_id is true.

Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
CC: Johannes Berg <johannes@sipsolutions.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jakub Kicinski <kuba@kernel.org>
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20210312163651.1398207-1-jarod@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:20:47 +01:00
Karthikeyan Kathirvel
041c881a0b mac80211: choose first enabled channel for monitor
Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.

Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:20:47 +01:00
Johannes Berg
77cbf790e5 nl80211: fix locking for wireless device netns change
We have all the network interfaces marked as netns-local
since the only reasonable thing to do right now is to set
a whole device, including all netdevs, into a different
network namespace. For this reason, we also have our own
way of changing the network namespace.

Unfortunately, the RTNL locking changes broke this, and
it now results in many RTNL assertions. The trivial fix
for those (just hold RTNL for the changes) however leads
to deadlocks in the cfg80211 netdev notifier.

Since we only need the wiphy, and that's still protected
by the RTNL, add a new NL80211_FLAG_NO_WIPHY_MTX flag to
the nl80211 ops and use it to _not_ take the wiphy mutex
but only the RTNL. This way, the notifier does all the
work necessary during unregistration/registration of the
netdevs from the old and in the new namespace.

Reported-by: Sid Hayn <sidhayn@gmail.com>
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210310215839.eadf7c43781b.I5fc6cf6676f800ab8008e03bbea9c3349b02d804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:20:47 +01:00
Daniel Phan
58d25626f6 mac80211: Check crypto_aead_encrypt for errors
crypto_aead_encrypt returns <0 on error, so if these calls are not checked,
execution may continue with failed encrypts.  It also seems that these two
crypto_aead_encrypt calls are the only instances in the codebase that are
not checked for errors.

Signed-off-by: Daniel Phan <daniel.phan36@gmail.com>
Link: https://lore.kernel.org/r/20210309204137.823268-1-daniel.phan36@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:20:41 +01:00
Brian Norris
0f7e90fadd mac80211: Allow HE operation to be longer than expected.
We observed some Cisco APs sending the following HE Operation IE in
associate response:

  ff 0a 24 f4 3f 00 01 fc ff 00 00 00

Its HE operation parameter is 0x003ff4, so the expected total length is
7 which does not match the actual length = 10. This causes association
failing with "HE AP is missing HE Capability/operation."

According to P802.11ax_D4 Table9-94, HE operation is extensible, and
according to 802.11-2016 10.27.8, STA should discard the part beyond
the maximum length and parse the truncated element.

Allow HE operation element to be longer than expected to handle this
case and future extensions.

Fixes: e4d005b80d ("mac80211: refactor extended element parsing")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org>
Link: https://lore.kernel.org/r/20210223051926.2653301-1-yenlinlai@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:14:04 +01:00
Johannes Berg
29175be06d mac80211: minstrel_ht: remove unused variable 'mg'
This probably came in through some refactoring and what is
now a call to minstrel_ht_group_min_rate_offset(), remove
the unused variable.

Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210219105744.f2538a80f6cf.I3d53554c158d5b896ac07ea546bceac67372ec28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:13:13 +01:00
Markus Theil
3bd801b14e mac80211: fix double free in ibss_leave
Clear beacon ie pointer and ie length after free
in order to prevent double free.

==================================================================
BUG: KASAN: double-free or invalid-free \
in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230
 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355
 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341
 kasan_slab_free include/linux/kasan.h:192 [inline]
 __cache_free mm/slab.c:3424 [inline]
 kfree+0xed/0x270 mm/slab.c:3760
 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline]
 __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212
 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172
 cfg80211_leave net/wireless/core.c:1221 [inline]
 cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040
 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline]
 call_netdevice_notifiers net/core/dev.c:2066 [inline]
 __dev_close_many+0xee/0x2e0 net/core/dev.c:1586
 __dev_close net/core/dev.c:1624 [inline]
 __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476
 dev_change_flags+0x8a/0x160 net/core/dev.c:8549
 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265
 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:13:09 +01:00
Johannes Berg
1944015fe9 mac80211: fix rate mask reset
Coverity reported the strange "if (~...)" condition that's
always true. It suggested that ! was intended instead of ~,
but upon further analysis I'm convinced that what really was
intended was a comparison to 0xff/0xffff (in HT/VHT cases
respectively), since this indicates that all of the rates
are enabled.

Change the comparison accordingly.

I'm guessing this never really mattered because a reset to
not having a rate mask is basically equivalent to having a
mask that enables all rates.

Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2ffbe6d333 ("mac80211: fix and optimize MCS mask handling")
Fixes: b119ad6e72 ("mac80211: add rate mask logic for vht rates")
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210212112213.36b38078f569.I8546a20c80bc1669058eb453e213630b846e107b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-03-16 21:13:06 +01:00
Filipe Manana
485df75554 btrfs: always pin deleted leaves when there are active tree mod log users
When freeing a tree block we may end up adding its extent back to the
free space cache/tree, as long as there are no more references for it,
it was created in the current transaction and writeback for it never
happened. This is generally fine, however when we have tree mod log
operations it can result in inconsistent versions of a btree after
unwinding extent buffers with the recorded tree mod log operations.

This is because:

* We only log operations for nodes (adding and removing key/pointers),
  for leaves we don't do anything;

* This means that we can log a MOD_LOG_KEY_REMOVE_WHILE_FREEING operation
  for a node that points to a leaf that was deleted;

* Before we apply the logged operation to unwind a node, we can have
  that leaf's extent allocated again, either as a node or as a leaf, and
  possibly for another btree. This is possible if the leaf was created in
  the current transaction and writeback for it never started, in which
  case btrfs_free_tree_block() returns its extent back to the free space
  cache/tree;

* Then, before applying the tree mod log operation, some task allocates
  the metadata extent just freed before, and uses it either as a leaf or
  as a node for some btree (can be the same or another one, it does not
  matter);

* After applying the MOD_LOG_KEY_REMOVE_WHILE_FREEING operation we now
  get the target node with an item pointing to the metadata extent that
  now has content different from what it had before the leaf was deleted.
  It might now belong to a different btree and be a node and not a leaf
  anymore.

  As a consequence, the results of searches after the unwinding can be
  unpredictable and produce unexpected results.

So make sure we pin extent buffers corresponding to leaves when there
are tree mod log users.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-16 20:32:22 +01:00
Filipe Manana
dbcc7d57bf btrfs: fix race when cloning extent buffer during rewind of an old root
While resolving backreferences, as part of a logical ino ioctl call or
fiemap, we can end up hitting a BUG_ON() when replaying tree mod log
operations of a root, triggering a stack trace like the following:

  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.c:1210!
  invalid opcode: 0000 [#1] SMP KASAN PTI
  CPU: 1 PID: 19054 Comm: crawl_335 Tainted: G        W         5.11.0-2d11c0084b02-misc-next+ #89
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  RIP: 0010:__tree_mod_log_rewind+0x3b1/0x3c0
  Code: 05 48 8d 74 10 (...)
  RSP: 0018:ffffc90001eb70b8 EFLAGS: 00010297
  RAX: 0000000000000000 RBX: ffff88812344e400 RCX: ffffffffb28933b6
  RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88812344e42c
  RBP: ffffc90001eb7108 R08: 1ffff11020b60a20 R09: ffffed1020b60a20
  R10: ffff888105b050f9 R11: ffffed1020b60a1f R12: 00000000000000ee
  R13: ffff8880195520c0 R14: ffff8881bc958500 R15: ffff88812344e42c
  FS:  00007fd1955e8700(0000) GS:ffff8881f5600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007efdb7928718 CR3: 000000010103a006 CR4: 0000000000170ee0
  Call Trace:
   btrfs_search_old_slot+0x265/0x10d0
   ? lock_acquired+0xbb/0x600
   ? btrfs_search_slot+0x1090/0x1090
   ? free_extent_buffer.part.61+0xd7/0x140
   ? free_extent_buffer+0x13/0x20
   resolve_indirect_refs+0x3e9/0xfc0
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? add_prelim_ref.part.11+0x150/0x150
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? lock_acquired+0xbb/0x600
   ? __kasan_check_write+0x14/0x20
   ? do_raw_spin_unlock+0xa8/0x140
   ? rb_insert_color+0x30/0x360
   ? prelim_ref_insert+0x12d/0x430
   find_parent_nodes+0x5c3/0x1830
   ? resolve_indirect_refs+0xfc0/0xfc0
   ? lock_release+0xc8/0x620
   ? fs_reclaim_acquire+0x67/0xf0
   ? lock_acquire+0xc7/0x510
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x160/0x210
   ? lock_release+0xc8/0x620
   ? fs_reclaim_acquire+0x67/0xf0
   ? lock_acquire+0xc7/0x510
   ? poison_range+0x38/0x40
   ? unpoison_range+0x14/0x40
   ? trace_hardirqs_on+0x55/0x120
   btrfs_find_all_roots_safe+0x142/0x1e0
   ? find_parent_nodes+0x1830/0x1830
   ? btrfs_inode_flags_to_xflags+0x50/0x50
   iterate_extent_inodes+0x20e/0x580
   ? tree_backref_for_extent+0x230/0x230
   ? lock_downgrade+0x3d0/0x3d0
   ? read_extent_buffer+0xdd/0x110
   ? lock_downgrade+0x3d0/0x3d0
   ? __kasan_check_read+0x11/0x20
   ? lock_acquired+0xbb/0x600
   ? __kasan_check_write+0x14/0x20
   ? _raw_spin_unlock+0x22/0x30
   ? __kasan_check_write+0x14/0x20
   iterate_inodes_from_logical+0x129/0x170
   ? iterate_inodes_from_logical+0x129/0x170
   ? btrfs_inode_flags_to_xflags+0x50/0x50
   ? iterate_extent_inodes+0x580/0x580
   ? __vmalloc_node+0x92/0xb0
   ? init_data_container+0x34/0xb0
   ? init_data_container+0x34/0xb0
   ? kvmalloc_node+0x60/0x80
   btrfs_ioctl_logical_to_ino+0x158/0x230
   btrfs_ioctl+0x205e/0x4040
   ? __might_sleep+0x71/0xe0
   ? btrfs_ioctl_get_supported_features+0x30/0x30
   ? getrusage+0x4b6/0x9c0
   ? __kasan_check_read+0x11/0x20
   ? lock_release+0xc8/0x620
   ? __might_fault+0x64/0xd0
   ? lock_acquire+0xc7/0x510
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? __kasan_check_read+0x11/0x20
   ? do_vfs_ioctl+0xfc/0x9d0
   ? ioctl_file_clone+0xe0/0xe0
   ? lock_downgrade+0x3d0/0x3d0
   ? lockdep_hardirqs_on_prepare+0x210/0x210
   ? __kasan_check_read+0x11/0x20
   ? lock_release+0xc8/0x620
   ? __task_pid_nr_ns+0xd3/0x250
   ? lock_acquire+0xc7/0x510
   ? __fget_files+0x160/0x230
   ? __fget_light+0xf2/0x110
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fd1976e2427
  Code: 00 00 90 48 8b 05 (...)
  RSP: 002b:00007fd1955e5cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007fd1955e5f40 RCX: 00007fd1976e2427
  RDX: 00007fd1955e5f48 RSI: 00000000c038943b RDI: 0000000000000004
  RBP: 0000000001000000 R08: 0000000000000000 R09: 00007fd1955e6120
  R10: 0000557835366b00 R11: 0000000000000246 R12: 0000000000000004
  R13: 00007fd1955e5f48 R14: 00007fd1955e5f40 R15: 00007fd1955e5ef8
  Modules linked in:
  ---[ end trace ec8931a1c36e57be ]---

  (gdb) l *(__tree_mod_log_rewind+0x3b1)
  0xffffffff81893521 is in __tree_mod_log_rewind (fs/btrfs/ctree.c:1210).
  1205                     * the modification. as we're going backwards, we do the
  1206                     * opposite of each operation here.
  1207                     */
  1208                    switch (tm->op) {
  1209                    case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
  1210                            BUG_ON(tm->slot < n);
  1211                            fallthrough;
  1212                    case MOD_LOG_KEY_REMOVE_WHILE_MOVING:
  1213                    case MOD_LOG_KEY_REMOVE:
  1214                            btrfs_set_node_key(eb, &tm->key, tm->slot);

Here's what happens to hit that BUG_ON():

1) We have one tree mod log user (through fiemap or the logical ino ioctl),
   with a sequence number of 1, so we have fs_info->tree_mod_seq == 1;

2) Another task is at ctree.c:balance_level() and we have eb X currently as
   the root of the tree, and we promote its single child, eb Y, as the new
   root.

   Then, at ctree.c:balance_level(), we call:

      tree_mod_log_insert_root(eb X, eb Y, 1);

3) At tree_mod_log_insert_root() we create tree mod log elements for each
   slot of eb X, of operation type MOD_LOG_KEY_REMOVE_WHILE_FREEING each
   with a ->logical pointing to ebX->start. These are placed in an array
   named tm_list.
   Lets assume there are N elements (N pointers in eb X);

4) Then, still at tree_mod_log_insert_root(), we create a tree mod log
   element of operation type MOD_LOG_ROOT_REPLACE, ->logical set to
   ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set
   to the level of eb X and ->generation set to the generation of eb X;

5) Then tree_mod_log_insert_root() calls tree_mod_log_free_eb() with
   tm_list as argument. After that, tree_mod_log_free_eb() calls
   __tree_mod_log_insert() for each member of tm_list in reverse order,
   from highest slot in eb X, slot N - 1, to slot 0 of eb X;

6) __tree_mod_log_insert() sets the sequence number of each given tree mod
   log operation - it increments fs_info->tree_mod_seq and sets
   fs_info->tree_mod_seq as the sequence number of the given tree mod log
   operation.

   This means that for the tm_list created at tree_mod_log_insert_root(),
   the element corresponding to slot 0 of eb X has the highest sequence
   number (1 + N), and the element corresponding to the last slot has the
   lowest sequence number (2);

7) Then, after inserting tm_list's elements into the tree mod log rbtree,
   the MOD_LOG_ROOT_REPLACE element is inserted, which gets the highest
   sequence number, which is N + 2;

8) Back to ctree.c:balance_level(), we free eb X by calling
   btrfs_free_tree_block() on it. Because eb X was created in the current
   transaction, has no other references and writeback did not happen for
   it, we add it back to the free space cache/tree;

9) Later some other task T allocates the metadata extent from eb X, since
   it is marked as free space in the space cache/tree, and uses it as a
   node for some other btree;

10) The tree mod log user task calls btrfs_search_old_slot(), which calls
    get_old_root(), and finally that calls __tree_mod_log_oldest_root()
    with time_seq == 1 and eb_root == eb Y;

11) First iteration of the while loop finds the tree mod log element with
    sequence number N + 2, for the logical address of eb Y and of type
    MOD_LOG_ROOT_REPLACE;

12) Because the operation type is MOD_LOG_ROOT_REPLACE, we don't break out
    of the loop, and set root_logical to point to tm->old_root.logical
    which corresponds to the logical address of eb X;

13) On the next iteration of the while loop, the call to
    tree_mod_log_search_oldest() returns the smallest tree mod log element
    for the logical address of eb X, which has a sequence number of 2, an
    operation type of MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to
    the old slot N - 1 of eb X (eb X had N items in it before being freed);

14) We then break out of the while loop and return the tree mod log operation
    of type MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot N - 1 of
    eb X, to get_old_root();

15) At get_old_root(), we process the MOD_LOG_ROOT_REPLACE operation
    and set "logical" to the logical address of eb X, which was the old
    root. We then call tree_mod_log_search() passing it the logical
    address of eb X and time_seq == 1;

16) Then before calling tree_mod_log_search(), task T adds a key to eb X,
    which results in adding a tree mod log operation of type
    MOD_LOG_KEY_ADD to the tree mod log - this is done at
    ctree.c:insert_ptr() - but after adding the tree mod log operation
    and before updating the number of items in eb X from 0 to 1...

17) The task at get_old_root() calls tree_mod_log_search() and gets the
    tree mod log operation of type MOD_LOG_KEY_ADD just added by task T.
    Then it enters the following if branch:

    if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) {
       (...)
    } (...)

    Calls read_tree_block() for eb X, which gets a reference on eb X but
    does not lock it - task T has it locked.
    Then it clones eb X while it has nritems set to 0 in its header, before
    task T sets nritems to 1 in eb X's header. From hereupon we use the
    clone of eb X which no other task has access to;

18) Then we call __tree_mod_log_rewind(), passing it the MOD_LOG_KEY_ADD
    mod log operation we just got from tree_mod_log_search() in the
    previous step and the cloned version of eb X;

19) At __tree_mod_log_rewind(), we set the local variable "n" to the number
    of items set in eb X's clone, which is 0. Then we enter the while loop,
    and in its first iteration we process the MOD_LOG_KEY_ADD operation,
    which just decrements "n" from 0 to (u32)-1, since "n" is declared with
    a type of u32. At the end of this iteration we call rb_next() to find the
    next tree mod log operation for eb X, that gives us the mod log operation
    of type MOD_LOG_KEY_REMOVE_WHILE_FREEING, for slot 0, with a sequence
    number of N + 1 (steps 3 to 6);

20) Then we go back to the top of the while loop and trigger the following
    BUG_ON():

        (...)
        switch (tm->op) {
        case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
                 BUG_ON(tm->slot < n);
                 fallthrough;
        (...)

    Because "n" has a value of (u32)-1 (4294967295) and tm->slot is 0.

Fix this by taking a read lock on the extent buffer before cloning it at
ctree.c:get_old_root(). This should be done regardless of the extent
buffer having been freed and reused, as a concurrent task might be
modifying it (while holding a write lock on it).

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/20210227155037.GN28049@hungrycats.org/
Fixes: 834328a849 ("Btrfs: tree mod log's old roots could still be part of the tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-16 20:32:17 +01:00
David Sterba
34e49994d0 btrfs: fix slab cache flags for free space tree bitmap
The free space tree bitmap slab cache is created with SLAB_RED_ZONE but
that's a debugging flag and not always enabled. Also the other slabs are
created with at least SLAB_MEM_SPREAD that we want as well to average
the memory placement cost.

Reported-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 3acd48507d ("btrfs: fix allocation of free space cache v1 bitmap pages")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-16 20:32:08 +01:00