Grab 'mmu' and do s/vcpu->arch.mmu/mmu to shorten line lengths and yield
smaller diffs when moving code around in future cleanup without forcing
the new code to use the same ugly pattern.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate the so called pae_root page on-demand, along with the lm_root
page, when shadowing 32-bit NPT with 64-bit NPT, i.e. when running a
32-bit L1. KVM currently only allocates the page when NPT is disabled,
or when L0 is 32-bit (using PAE paging).
Note, there is an existing memory leak involving the MMU roots, as KVM
fails to free the PAE roots on failure. This will be addressed in a
future commit.
Fixes: ee6268ba3a ("KVM: x86: Skip pae_root shadow allocation if tdp enabled")
Fixes: b6b80c78af ("KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT")
Cc: stable@vger.kernel.org
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Forward declarations make the code larger and rewrites harder. Harder as
they are often omitted from global changes. Remove forward declarations
which are not really needed, i.e. the definition of the function is
before its first use.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: update the prototype comments ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Detailed update of this pull request as following:
1. Add stubs of extcon_register_notifier_all() function for when
CONFIG_EXTCON is disabled.
2. Fix exception handling in extcon_dev_register() when failed to
initialize the extcon device.
-----BEGIN PGP SIGNATURE-----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=1HoF
-----END PGP SIGNATURE-----
Merge tag 'extcon-fixes-for-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for v5.12-rc4
Detailed update of this pull request as following:
1. Add stubs of extcon_register_notifier_all() function for when
CONFIG_EXTCON is disabled.
2. Fix exception handling in extcon_dev_register() when failed to
initialize the extcon device.
* tag 'extcon-fixes-for-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: Fix error handling in extcon_dev_register
extcon: Add stubs for extcon_register_notifier_all() functions
Forward declarations make the code larger, harder to follow and rewrite.
Harder as the declarations are often omitted from global changes. Remove
forward declarations which are not really needed, i.e. when the
definition of the function is before its first use.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The new per-cpu stat 'nested_run' is introduced in order to track if L1 VM
is running or used to run L2 VM.
An example of the usage of 'nested_run' is to help the host administrator
to easily track if any L1 VM is used to run L2 VM. Suppose there is issue
that may happen with nested virtualization, the administrator will be able
to easily narrow down and confirm if the issue is due to nested
virtualization via 'nested_run'. For example, whether the fix like
commit 88dddc11a8 ("KVM: nVMX: do not use dangling shadow VMCS after
guest reset") is required.
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20210305225747.7682-1-dongli.zhang@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although FW crash logs are already supported for dumping in driver, the
logs may not be sufficient to analyze field issues. To improve this part,
we add a support to dump FW memory.
When driver receives FW crash notifications, driver uses DDMA, which is a
HW ability, to copy specified FW memory to FW fifo. Driver can then dump
these information from FW fifo. With this support, not only FW crash log
but also specified FW memory will be dumped while FW crash. Besides,
specified registers are also dumped.
This feature is implemeted on 8822C first due to difference of FW layouts
between ICs. In addition, we add a debugfs to trigger FW crash. It can
simulate the process of crash, dump and reset. Through it, we can also
check if a reset is ongoing.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210309060121.9099-1-pkshih@realtek.com
Use same cookie for request_threaded_irq() & free_irq() to properly free
IRQ during module unload. free_irq() already uses *wilc* handler so the
changes are required for request_threaded_irq().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210225042302.17048-1-ajay.kathat@microchip.com
chip_allow_sleep() only supported wakeup via SDIO, which made the
driver unusable over SPI. This code is a straight forward port from
the driver in the linux-at91 repository.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210224033317.1507603-1-davidm@egauge.net
The variable ret is defined at the beginning and initialized
to 0 until the function returns ret, and the variable ret is
not reassigned.Therefore, we do not need to define the variable
ret, just return 0 directly at the end of the function.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210223075438.13676-1-samirweng1979@163.com
Clear WL/BT on/off bit in scoreboard register that is used to exchange
WL/BT status. Since the status is preserved after warm reboot, we must
clear it when WL is going to down.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210219054140.7835-1-pkshih@realtek.com
ath.git patches for v5.13. Major changes:
ath11k
* add initial support for QCN9074, but not enabled yet due to firmware problems
* enable radar detection for 160MHz secondary segment
* handle beacon misses in station mode
Resolves a merge issue with:
drivers/tty/hvc/hvcs.c
and we want the tty/serial fixes from 5.12-rc3 in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The imx6ul-evk board designer took the bad decision to tie the
two Ethernet PHY reset lines together. This prevents one Ethernet
interface to work while the other one is brought down. For example:
# ifconfig eth0 down
# [ 279.386551] fec 2188000.ethernet eth1: Link is Down
Bringing eth0 interface down also causes eth1 to be down.
The Ethernet reset lines comes from the IO expander and both come in
logic level 0 by default.
To fix this issue, remove the Ethernet PHY reset descriptions from
its respective PHY nodes and force both Ethernet PHY lines to be at
logic level 1 via gpio-hog.
Fixes: 2db7e78bf0 ("ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Function parameter or member 'value' not described in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Excess function parameter 'validate' description in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Function parameter or member 'value' not described in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'validate' description in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'fallback' description in 'do_mem_probe'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'p_dev' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'where' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'val' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'accessf' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:194: warning: Function parameter or member 'p_dev' not described in 'pcmcia_read_config_byte'
drivers/pcmcia/pcmcia_resource.c:194: warning: Function parameter or member 'where' not described in 'pcmcia_read_config_byte'
drivers/pcmcia/pcmcia_resource.c:194: warning: Function parameter or member 'val' not described in 'pcmcia_read_config_byte'
drivers/pcmcia/pcmcia_resource.c:207: warning: Function parameter or member 'p_dev' not described in 'pcmcia_write_config_byte'
drivers/pcmcia/pcmcia_resource.c:207: warning: Function parameter or member 'where' not described in 'pcmcia_write_config_byte'
drivers/pcmcia/pcmcia_resource.c:207: warning: Function parameter or member 'val' not described in 'pcmcia_write_config_byte'
drivers/pcmcia/pcmcia_resource.c:728: warning: Function parameter or member 'p_dev' not described in 'pcmcia_setup_isa_irq'
drivers/pcmcia/pcmcia_resource.c:728: warning: Function parameter or member 'type' not described in 'pcmcia_setup_isa_irq'
drivers/pcmcia/pcmcia_resource.c:793: warning: Function parameter or member 'p_dev' not described in 'pcmcia_setup_irq'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/ds.c:96: warning: expecting prototype for pcmcia_store_new_id(). Prototype was for new_id_store() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/pcmcia_cis.c:129: warning: Function parameter or member 'flags' not described in 'pcmcia_io_cfg_data_width'
drivers/pcmcia/pcmcia_cis.c:154: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_loop_config'
drivers/pcmcia/pcmcia_cis.c:154: warning: Function parameter or member 'parse' not described in 'pcmcia_do_loop_config'
drivers/pcmcia/pcmcia_cis.c:154: warning: Function parameter or member 'priv' not described in 'pcmcia_do_loop_config'
drivers/pcmcia/pcmcia_cis.c:300: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_loop_tuple'
drivers/pcmcia/pcmcia_cis.c:300: warning: Function parameter or member 'parse' not described in 'pcmcia_do_loop_tuple'
drivers/pcmcia/pcmcia_cis.c:300: warning: Function parameter or member 'priv' not described in 'pcmcia_do_loop_tuple'
drivers/pcmcia/pcmcia_cis.c:351: warning: Function parameter or member 'p_dev' not described in 'pcmcia_do_get_tuple'
drivers/pcmcia/pcmcia_cis.c:351: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_get_tuple'
drivers/pcmcia/pcmcia_cis.c:351: warning: Function parameter or member 'priv' not described in 'pcmcia_do_get_tuple'
drivers/pcmcia/pcmcia_cis.c:399: warning: Function parameter or member 'p_dev' not described in 'pcmcia_do_get_mac'
drivers/pcmcia/pcmcia_cis.c:399: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_get_mac'
drivers/pcmcia/pcmcia_cis.c:399: warning: Function parameter or member 'priv' not described in 'pcmcia_do_get_mac'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/cistpl.c:88: warning: Function parameter or member 's' not described in 'set_cis_map'
drivers/pcmcia/cistpl.c:88: warning: Function parameter or member 'card_offset' not described in 'set_cis_map'
drivers/pcmcia/cistpl.c:88: warning: Function parameter or member 'flags' not described in 'set_cis_map'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 's' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'attr' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'addr' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'len' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'ptr' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 's' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'attr' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'addr' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'len' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'ptr' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 's' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'attr' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'addr' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'len' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'ptr' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:372: warning: Function parameter or member 's' not described in 'verify_cis_cache'
drivers/pcmcia/cistpl.c:412: warning: Function parameter or member 's' not described in 'pcmcia_replace_cis'
drivers/pcmcia/cistpl.c:412: warning: Function parameter or member 'data' not described in 'pcmcia_replace_cis'
drivers/pcmcia/cistpl.c:412: warning: Function parameter or member 'len' not described in 'pcmcia_replace_cis'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/rsrc_nonstatic.c:265: warning: Function parameter or member 's' not described in 'readable'
drivers/pcmcia/rsrc_nonstatic.c:265: warning: Function parameter or member 'res' not described in 'readable'
drivers/pcmcia/rsrc_nonstatic.c:265: warning: Function parameter or member 'count' not described in 'readable'
drivers/pcmcia/rsrc_nonstatic.c:296: warning: Function parameter or member 's' not described in 'checksum'
drivers/pcmcia/rsrc_nonstatic.c:296: warning: Function parameter or member 'res' not described in 'checksum'
drivers/pcmcia/rsrc_nonstatic.c:296: warning: Function parameter or member 'value' not described in 'checksum'
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Function parameter or member 'value' not described in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Excess function parameter 'validate' description in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Function parameter or member 'value' not described in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'validate' description in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'fallback' description in 'do_mem_probe'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
pcmcia_device_remove() is only ever called by the driver core with
dev->driver pointing to a valid driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[linux@dominikbrodowski.net: shorten commit message, fix reference
to pcmcia_device_probe]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
disable-gpio' and 'power-on-gpio' are not valid properties
according to Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.
Remove the unsupported properties.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Reviewed-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the unnecessary #address-cells/#size-cells to avoid warnings
from W=1 build like this:
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi:33.12-78.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[fabio: Make the warning messages more succint]
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove the unnecessary #address-cells/#size-cells and rename the node
names to fix the following W=1 dtc warnings:
arch/arm/boot/dts/imx6dl-plybas.dts:26.13-30.5: Warning (unit_address_vs_reg): /gpio_keys/button@20: node has a unit name, but no reg or ranges property
arch/arm/boot/dts/imx6dl-plybas.dts:32.13-36.5: Warning (unit_address_vs_reg): /gpio_keys/button@21: node has a unit name, but no reg or ranges property
arch/arm/boot/dts/imx6dl-plybas.dts:20.12-37.4: Warning (avoid_unnecessary_addr_size): /gpio_keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Define GPIO line names for b450v3, b650v3, and b850v3.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Explicitly mark I2C GPIOs as open drain to fix the following
kernel message being printed:
enforced open drain please flag it properly in DT/ACPI DSDT/board file
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add PHY voltage supply information fixing the following kernel message:
2188000.ethernet supply phy not found, using dummy regulator
Also add PHY clock information to avoid depending on the bootloader
programming correct values.
The bootloader also sets some reserved registers in the PHY as
advised by Qualcomm, which is not supported by the bindings/kernel
driver, so the reset GPIO has not been added intentionally.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add VBUS regulator GPIO information, so that USB OTG port can
also be used in host mode.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current setting reflects about 86 Ohms of source-impedance
on the SDIO signals where the WiFi board is hooked up. PCB traces are
routed with 50 Ohms impedance and there are no serial resistors on
those traces.
This commit changes the source-impedance to 52 Ohms to better match our
hardware design.
The impedances given in this commit message refer to 3.3V operation.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move the "hog" pins to the corresponding pin groups for SPI, ENET, PMIC,
LEDs, so that these pins can be used for different purposes when the
respective drivers are disabled.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Board uses 4-wire synchronous mode for audio,
so add SYN bit for PTCR AUDMUX registers.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The operating mode is used for the AC97 interface only,
so lets drop the excess fsl,mode item from SSI node.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The micro SD card slot uses GPIO3_13 as card detect pin, so describe
it in the devicetree.
This was noticed when converting imx53-qsb board to driver model
in U-Boot as the micro SD card was not getting detected.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Crypto engine (CAAM) on LS1012A platform is configured HW-coherent,
mark accordingly the DT node.
Lack of "dma-coherent" property for an IP that is configured HW-coherent
can lead to problems, similar to what has been reported for LS1046A.
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 85b85c5695 ("arm64: dts: ls1012a: add crypto node")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Crypto engine (CAAM) on LS1043A platform is configured HW-coherent,
mark accordingly the DT node.
Lack of "dma-coherent" property for an IP that is configured HW-coherent
can lead to problems, similar to what has been reported for LS1046A.
Cc: <stable@vger.kernel.org> # v4.8+
Fixes: 63dac35b58 ("arm64: dts: ls1043a: add crypto node")
Link: https://lore.kernel.org/linux-crypto/fe6faa24-d8f7-d18f-adfa-44fa0caa1598@arm.com
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The variables state and ee are being initialized with values that
are never read and are being updated later with a new values. The
initializations are redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210311111727.8433-1-colin.king@canonical.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Except MX8QM pinctrl driver is missing, all other necessary drivers
for a booting are reused from MX8QXP which are already enabled
in defconfig.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This driver is used by the Nitrogen8m Mini SBC.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to model the mic input mux on the Librem 5 devkit.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to make DRAM frequency scaling via devfreq as used
on the Librem 5 and Librem 5 Devkit.
With the interconnect support enabled we now need imx devfreq on top
to make this work.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The board has both MACs routed out, enable the EQOS.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add EQOS GMAC node per Documentation/devicetree/bindings/net/imx-dwmac.txt ,
leave out the nvmem entries as that is not yet available, so the MAC has to
be passed in via DT by the bootloader.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.
i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.
PCIe, DSI, CSI nodes will add it into imx8mm-engicam-edimm2.2.dtsi once
Mainline Linux supported.
Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>