Commit graph

1,014,740 commits

Author SHA1 Message Date
Geert Uytterhoeven
405daa39b2 arm64: dts: renesas: falcon: Add I2C EEPROM nodes
Add device nodes for the I2C EEPROMs on the Falcon CPU and BreakOut
boards.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210304153257.4059277-2-geert+renesas@glider.be
2021-03-10 10:59:11 +01:00
Geert Uytterhoeven
a4be49e75a ARM: dts: rza2mevb: Upstream Linux requires SDRAM
As upstream Linux does not support XIP (eXecute-In-Place) for ARMv7-A
platforms that are part of the ARCH_MULTIPLATFORM framework, it cannot
run in the 8 MiB of HyperRAM present on the RZ/A2M CPU board.  Hence the
64 MiB of SDRAM on the sub-board needs to be enabled, which has the
following ramifications:
  - SCIF4 connected to the on-board USB-serial can no longer be used as
    the serial console,
  - Instead, SCIF2 is used as the serial console, by connecting a 3.3V
    TTL USB-to-Serial adapter to the CMOS camera connector,
  - The first Ethernet channel can no longer be used,
  - USB Channel 1 loses the overcurrent input signal.

Based on the Linux-4.19 BSP for RZ/A2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Chris Brandt <chris.brandt@renesas.com>
Link: https://lore.kernel.org/r/20210304094945.4003097-1-geert+renesas@glider.be
2021-03-10 10:59:11 +01:00
Geert Uytterhoeven
b1158c5e14 arm64: dts: renesas: Consolidate Salvator-X(S) HDMI0 handling
Now all Salvator-X(S) SoC/board combinations have support for HDMI
sound, all HDMI0 connector and sound descriptions are identical.
Replace them by shared descriptions in salvator-common.dtsi, to reduce
duplication.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20210303140529.3941670-1-geert+renesas@glider.be
2021-03-10 10:59:11 +01:00
Niklas Söderlund
f7adcca27e pinctrl: renesas: r8a77965: Add vin4_g8 and vin5_high8 pins
This patch adds vin4_g8 and vin5_high8 support to the R8A77965 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-10 10:50:26 +01:00
Niklas Söderlund
2a9e4f74cd pinctrl: renesas: r8a77990: Add vin4_g8 and vin5_high8 pins
This patch adds vin4_g8 and vin5_high8 support to the R8A77990 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-10 10:50:26 +01:00
Niklas Söderlund
3d250efb8c pinctrl: renesas: r8a7796: Add vin4_g8 and vin5_high8 pins
This patch adds vin4_g8 and vin5_high8 support to the R8A7796 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-10 10:50:26 +01:00
Niklas Söderlund
5f79bbb28b pinctrl: renesas: r8a77951: Add vin4_g8 and vin5_high8 pins
This patch adds vin4_g8 and vin5_high8 support to the R8A77951 SoC.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Link: https://lore.kernel.org/r/20210309114930.2433711-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-10 10:50:26 +01:00
Niklas Söderlund
c66424ea75 clk: renesas: r8a779a0: Add TSC clock
Implement support for the TSC clock on V3U.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210309165538.2682268-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-10 10:49:20 +01:00
Wolfram Sang
c52f4f839a clk: renesas: r8a779a0: Add TMU clocks
Also add CL16MCK source clock for TMU0.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210305143259.12622-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-03-10 10:48:57 +01:00
Konrad Dybcio
225be60f38 dt-bindings: backlight: qcom-wled: Add PMI8994 compatible
Document the newly added PMI8994 compatible.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-10 09:22:37 +00:00
Edmundo Carmona Antoranz
13c2235b2b sched: Remove unnecessary variable from schedule_tail()
Since 565790d28b (sched: Fix balance_callback(), 2020-05-11), there
is no longer a need to reuse the result value of the call to finish_task_switch()
inside schedule_tail(), therefore the variable used to hold that value
(rq) is no longer needed.

Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210306210739.1370486-1-eantoranz@gmail.com
2021-03-10 09:51:49 +01:00
Clement Courbet
1e17fb8edc sched: Optimize __calc_delta()
A significant portion of __calc_delta() time is spent in the loop
shifting a u64 by 32 bits. Use `fls` instead of iterating.

This is ~7x faster on benchmarks.

The generic `fls` implementation (`generic_fls`) is still ~4x faster
than the loop.
Architectures that have a better implementation will make use of it. For
example, on x86 we get an additional factor 2 in speed without dedicated
implementation.

On GCC, the asm versions of `fls` are about the same speed as the
builtin. On Clang, the versions that use fls are more than twice as
slow as the builtin. This is because the way the `fls` function is
written, clang puts the value in memory:
https://godbolt.org/z/EfMbYe. This bug is filed at
https://bugs.llvm.org/show_bug.cgi?idI406.

```
name                                   cpu/op
BM_Calc<__calc_delta_loop>             9.57ms Â=B112%
BM_Calc<__calc_delta_generic_fls>      2.36ms Â=B113%
BM_Calc<__calc_delta_asm_fls>          2.45ms Â=B113%
BM_Calc<__calc_delta_asm_fls_nomem>    1.66ms Â=B112%
BM_Calc<__calc_delta_asm_fls64>        2.46ms Â=B113%
BM_Calc<__calc_delta_asm_fls64_nomem>  1.34ms Â=B115%
BM_Calc<__calc_delta_builtin>          1.32ms Â=B111%
```

Signed-off-by: Clement Courbet <courbet@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210303224653.2579656-1-joshdon@google.com
2021-03-10 09:51:49 +01:00
Peter Zijlstra
4817a52b30 seqlock,lockdep: Fix seqcount_latch_init()
seqcount_init() must be a macro in order to preserve the static
variable that is used for the lockdep key. Don't then wrap it in an
inline function, which destroys that.

Luckily there aren't many users of this function, but fix it before it
becomes a problem.

Fixes: 80793c3471 ("seqlock: Introduce seqcount_latch_t")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YEeFEbNUVkZaXDp4@hirez.programming.kicks-ass.net
2021-03-10 09:51:45 +01:00
Peter Zijlstra
d5b0e0677b u64_stats,lockdep: Fix u64_stats_init() vs lockdep
Jakub reported that:

    static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
    {
	    ...
	    u64_stats_init(&tp->rx_stats.syncp);
	    u64_stats_init(&tp->tx_stats.syncp);
	    ...
    }

results in lockdep getting confused between the RX and TX stats lock.
This is because u64_stats_init() is an inline calling seqcount_init(),
which is a macro using a static variable to generate a lockdep class.

By wrapping that in an inline, we negate the effect of the macro and
fold the static key variable, hence the confusion.

Fix by also making u64_stats_init() a macro for the case where it
matters, leaving the other case an inline for argument validation
etc.

Reported-by: Jakub Kicinski <kuba@kernel.org>
Debugged-by: "Ahmed S. Darwish" <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net
2021-03-10 09:51:45 +01:00
Yejune Deng
a758b7c4c6 virt: acrn: Use EPOLLIN instead of POLLIN
This fixes the following sparse warning:
"sparse warnings: (new ones prefixed by >>)"
>> drivers/virt/acrn/irqfd.c:163:13: sparse: sparse: restricted __poll_t
 degrades to integer

Fixes: dcf9625f2a ("virt: acrn: Use vfs_poll() instead of f_op->poll()")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/20210310074901.7486-1-yejune.deng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:50:23 +01:00
Fabio Estevam
60a35ba914 usb: usb-mx2: Remove unused file
i.MX21 support has been dropped, so remove such unused file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210304023220.2362407-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:18 +01:00
Wei Yongjun
f2d90e07b5 usb: typec: stusb160x: fix return value check in stusb160x_probe()
In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: da0cb63100 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094839.3586773-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:18 +01:00
Wei Yongjun
604c75893a usb: typec: tps6598x: Fix return value check in tps6598x_probe()
In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: 18a6c866bb ("usb: typec: tps6598x: Add USB role switching logic")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094841.3587751-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:18 +01:00
Yang Li
493d0856de usb: typec: tcpm: turn tcpm_ams_finish into void function
This function always return '0' and no callers use the return value.
So make it a void function.

This eliminates the following coccicheck warning:
./drivers/usb/typec/tcpm/tcpm.c:778:5-8: Unneeded variable: "ret".
Return "0" on line 794

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1615185330-118246-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:18 +01:00
Badhri Jagan Sridharan
19c234a14e usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
While interpreting CC_STATUS, ROLE_CONTROL has to be read to make
sure that CC1/CC2 is not forced presenting Rp/Rd.

>From the TCPCI spec:

4.4.5.2 ROLE_CONTROL (Normative):
The TCPM shall write B6 (DRP) = 0b and B3..0 (CC1/CC2) if it wishes
to control the Rp/Rd directly instead of having the TCPC perform
DRP toggling autonomously. When controlling Rp/Rd directly, the
TCPM writes to B3..0 (CC1/CC2) each time it wishes to change the
CC1/CC2 values. This control is used for TCPM-TCPC implementing
Source or Sink only as well as when a connection has been detected
via DRP toggling but the TCPM wishes to attempt Try.Src or Try.Snk.

Table 4-22. CC_STATUS Register Definition:
If (ROLE_CONTROL.CC1 = Rd) or ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp-1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp-3.0A

If (ROLE_CONTROL.CC2=Rd) or (ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp 1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp 3.0A

Fixes: 74e656d6b0 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210304070931.1947316-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:18 +01:00
Chunfeng Yun
365038f24b usb: common: move function's kerneldoc next to its definition
Following a general rule, add the kerneldoc for a function next
to it's definition, but not next to its declaration in a header
file.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/c4d2e010ae2bf67cdfa0b55e6d1deb9339d9d3dc.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
f18b6edbce usb: xhci-mtk: print debug info of endpoint interval
Print bInterval and convert it into the time expressed in
us or ms unit, this is the key info when allocate bandwidth
failed.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/f7a9fa7a812296fcd6c603bfa9853076144018d6.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
fb95c7cf56 usb: common: add function to get interval expressed in us unit
Add a new function to convert bInterval into the time expressed
in 1us unit.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/25c8a09b055f716c1e5bf11fea72c3418f844482.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
14295a1500 usb: xhci-mtk: support to build xhci-mtk-hcd.ko
Currently xhci-hcd.ko building depends on USB_XHCI_MTK, this
is not flexible for some cases. For example:
USB_XHCI_HCD is y, and USB_XHCI_MTK is m, then we can't
implement extended functions if only update xhci-mtk.ko
This patch is used to remove the dependence.

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/0b62e21ddfacc1c2874726dd27ccab80c993f303.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
dc9d3b2c4e usb: xhci-mtk: remove declaration of xhci_mtk_setup()
Move xhci_driver_overrides struct variable after definition
of xhci_mtk_setup(), then we can remove it's declaration.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/cf627d611a5c59508371cc3360cb402b70825fd8.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
ccda8c224c usb: xhci-mtk: add some schedule error number
This is used to provide more information about which case
causes bandwidth schedule failure.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/9771f44093053b581e9c4be4b7fb68d9fcecad08.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
bf7da03ae4 usb: xhci-mtk: rebuild the way to get bandwidth domain
Rebuild the function get_bw_index(), get the bandwidth domain
directly instead its index of domain array.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/de618970301702c57bd352bf87df48bc17c699dd.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
11fdcc3937 usb: xhci-mtk: use @tt_info to check the FS/LS device is under a HS hub
If the LS/FS device is connected to an external HS hub, the member
@tt_info in xhci_virt_device struct in not NULL, use it to check
whether a LS/FS device is under an exernal HS hub, then no need get
the slot context of this device.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/8117df52f16bd03087e486d7d740a183b6dd634a.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
6009bea08a usb: xhci-mtk: add a member @speed in mu3h_sch_ep_info struct
This is used to drop parameter @udev for some functions,
meanwhile remove some unused @udev parameter.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/cda0833e44d6027cc8fdee1e29ce2b5b2a6ac03d.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
9132799d4a usb: xhci-mtk: use clear type instead of void
Use struct usb_host_endpoint instead of void to declare
the member @ep of mu3h_sch_ep_info struct.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/e9790eb4b959f9f843433fa5048c76772cc59061.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
b707c13f98 usb: xhci-mtk: remove unnecessary members of mu3h_sch_tt struct
The members @usb_tt and @tt_port in mu3h_sch_tt struct
are not used after initialization, so can be removed

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/9afecc2411895a3c76658df26ebca1c961a39fbb.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:17 +01:00
Chunfeng Yun
44b948287a usb: xhci-mtk: add a function to get bandwidth boundary
This is used to simplify unit test.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/805b3ba66c2f02a52de4440212519aaa58463039.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Chunfeng Yun
338af695ff usb: xhci-mtk: add a function to (un)load bandwidth info
Extract a function to load/unload bandwidth info, and remove
a dummy check of TT offset.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/6fbc000756a4a4a7efbce651b785fee7561becb6.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Chunfeng Yun
4a56adf4fa usb: xhci-mtk: use @sch_tt to check whether need do TT schedule
It's clearer to use @sch_tt to check whether need do TT schedule,
no function is changed.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/324a76782ccaf857a8f01f67aee435e8ec7d0e28.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Chunfeng Yun
1bf661daf6 usb: xhci-mtk: add only one extra CS for FS/LS INTR
In USB2 Spec:
"11.18.5 TT Response Generation
In general, there will be two (or more) complete-split
transactions scheduled for a periodic endpoint.
However, for interrupt endpoints, the maximum size of
the full-/low-speed transaction guarantees that it can
never require more than two complete-split transactions.
Two complete-split transactions are only required
when the transaction spans a microframe boundary."

Due to the maxp is 64, and less then 188 (at most in one
microframe), seems never span boundary, so use only one CS
for FS/LS interrupt transfer, this will save some bandwidth.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/5b9ff09f53d23cf9e5c5437db4ffc18b798bf60c.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Chunfeng Yun
7c986fbc16 usb: xhci-mtk: get the microframe boundary for ESIT
Tune the boundary for FS/LS ESIT due to CS:
For ISOC out-ep, the controller starts transfer data after
the first SS; for others, the data is already transferred
before the last CS.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/49e5a269a47984f3126a70c3fb471b0c2874b8c2.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Chunfeng Yun
e19ee44a3d usb: xhci-mtk: improve bandwidth scheduling with TT
When the USB headset is plug into an external hub, sometimes
can't set config due to not enough bandwidth, so need improve
LS/FS INT/ISOC bandwidth scheduling with TT.

Fixes: 54f6a8af37 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yaqii Wu <yaqii.wu@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/2f30e81400a59afef5f8231c98149169c7520519.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Chunfeng Yun
5fa5827566 usb: xhci-mtk: remove or operator for setting schedule parameters
Side effect may happen if use or operator to set schedule parameters
when the parameters are already set before. Set them directly due to
other bits are reserved.

Fixes: 54f6a8af37 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/d287899e6beb2fc1bfb8900c75a872f628ecde55.1615170625.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Ray Chi
0f3edf99c2 usb: dwc3: document usb_psy in struct dwc3
The new struct member was added to struct dwc3, but
a documentation was missing:

drivers/usb/dwc3/core.h:1273: warning: Function parameter or member 'usb_psy' not described in 'dwc3'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ray Chi <raychi@google.com>
Link: https://lore.kernel.org/r/20210303095802.2801733-1-raychi@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Colin Ian King
b0bf77cd38 usb: dwc3: Fix dereferencing of null dwc->usb_psy
Currently the null check logic on dwc->usb_psy is inverted as it allows
calls to power_supply_put with a null dwc->usb_psy causing a null
pointer dereference. Fix this by removing the ! operator.

Addresses-Coverity: ("Dereference after null check")
Fixes: 59fa3def35de ("usb: dwc3: add a power supply for current control")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210303095826.6143-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Greg Kroah-Hartman
92d1e87e62 USB: remove usb_bus_type from usb.h
We have 2 forward declarations of usb_bus_type, one in the system-wide
usb.h and the other in the "USB core only header file".  This variable
is not exported from the USB core, so remove the declaration from usb.h
as it does not need to be there.

Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20210226102356.716746-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Greg Kroah-Hartman
153e140d1e USB: typec: tcpm: create debugfs subdir for the driver
The single debugfs file for this driver really is a log file, so make a
subdir and call it "log" to make it obvious this is what it is for.
This makes cleanup simpler as we just remove the whole directory, no
need to handle individual files anymore.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210216144645.3813043-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:16 +01:00
Greg Kroah-Hartman
24a16199d9 USB: typec: fusb302: create debugfs subdir for the driver
The single debugfs file for this driver really is a log file, so make a
subdir and call it "log" to make it obvious this is what it is for.
This makes cleanup simpler as we just remove the whole directory, no
need to handle individual files anymore.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: linux-usb@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210216144645.3813043-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00
Greg Kroah-Hartman
5649d86f53 USB: host: uhci: remove dentry pointer for debugfs
There is no need to keep the dentry pointer around for the created
debugfs file, as it is only needed when removing it from the system.
When it is to be removed, ask debugfs itself for the pointer, to save on
storage and make things a bit simpler.

And, no one noticed that a __maybe_unused dentry * in uhci_start()
really was unused, so remove that as it's obviously not needed, and
hasn't been for quite some time.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20210216144645.3813043-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00
Greg Kroah-Hartman
82d4afcfa9 USB: host: sl811: remove dentry pointer for debugfs
There is no need to keep the dentry pointer around for the created
debugfs file, as it is only needed when removing it from the system.
When it is to be removed, ask debugfs itself for the pointer, to save on
storage and make things a bit simpler.

Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20210216144645.3813043-3-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00
Greg Kroah-Hartman
7347f4b95f USB: host: isp1362: remove dentry pointer for debugfs
There is no need to keep the dentry pointer around for the created
debugfs file, as it is only needed when removing it from the system.
When it is to be removed, ask debugfs itself for the pointer, to save on
storage and make things a bit simpler.

Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20210216144645.3813043-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00
Greg Kroah-Hartman
7c7b971d71 USB: host: isp116x: remove dentry pointer for debugfs
There is no need to keep the dentry pointer around for the created
debugfs file, as it is only needed when removing it from the system.
When it is to be removed, ask debugfs itself for the pointer, to save on
storage and make things a bit simpler.

Cc: Olav Kongas <ok@artecdesign.ee>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20210216144645.3813043-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00
Martin Devera
b9d9137d29 usb: dwc2: Add STM32 related debugfs entries
These are entries related to STM32MP1 PHY control.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Martin Devera <devik@eaxlabs.cz>
Link: https://lore.kernel.org/r/20210227215528.12752-1-devik@eaxlabs.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00
kernel test robot
4294a8c2b8 usb: chipidea: tegra: fix flexible_array.cocci warnings
Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.

Generated by: scripts/coccinelle/misc/flexible_array.cocci

Fixes: fc53d52790 ("usb: chipidea: tegra: Support host mode")
CC: Peter Geis <pgwipeout@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2102132108040.2720@hadrien
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00
Colin Ian King
292f750f43 USB: gadget: dummy-hcd: remove redundant initialization of variable 'value'
The variable 'value' is being initialized with 1 that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210217210124.197780-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10 09:37:15 +01:00