When the purpose of migration_cpu_stop() is to migrate the task to
'any' valid CPU, don't migrate the task when it's already running on a
valid CPU.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.569238629@infradead.org
The return of _nohz_idle_balance() is not used anymore so we can remove
it
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-3-vincent.guittot@linaro.org
The SCA_MIGRATE_ENABLE and task_running() cases are almost identical,
collapse them to avoid further duplication.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.500108964@infradead.org
newidle_balance runs with both preempt and irq disabled which prevent
local irq to run during this period. The duration for updating the
blocked load of CPUs varies according to the number of CPU cgroups
with non-decayed load and extends this critical period to an uncontrolled
level.
Remove the update from newidle_balance and trigger a normal ILB that
will take care of the update instead.
This reduces the IRQ latency from O(nr_cgroups * nr_nohz_cpus) to
O(nr_cgroups).
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224133007.28644-2-vincent.guittot@linaro.org
The recent addition of in_serving_softirq() to kconv.h results in
compile failure on PREEMPT_RT because it requires
task_struct::softirq_disable_cnt. This is not available if kconv.h is
included from sched.h.
It is not needed to include kconv.h from sched.h. All but the net/ user
already include the kconv header file.
Move the include of the kconv.h header from sched.h it its users.
Additionally include sched.h from kconv.h to ensure that everything
task_struct related is available.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lkml.kernel.org/r/20210218173124.iy5iyqv3a4oia4vv@linutronix.de
Since, when ->stop_pending, only the stopper can uninstall
p->migration_pending. This could simplify a few ifs, because:
(pending != NULL) => (pending == p->migration_pending)
Also, the fatty comment above affine_move_task() probably needs a bit
of gardening.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When affine_move_task() issues a migration_cpu_stop(), the purpose of
that function is to complete that @pending, not any random other
p->migration_pending that might have gotten installed since.
This realization much simplifies migration_cpu_stop() and allows
further necessary steps to fix all this as it provides the guarantee
that @pending's stopper will complete @pending (and not some random
other @pending).
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.430014682@infradead.org
When affine_move_task(p) is called on a running task @p, which is not
otherwise already changing affinity, we'll first set
p->migration_pending and then do:
stop_one_cpu(cpu_of_rq(rq), migration_cpu_stop, &arg);
This then gets us to migration_cpu_stop() running on the CPU that was
previously running our victim task @p.
If we find that our task is no longer on that runqueue (this can
happen because of a concurrent migration due to load-balance etc.),
then we'll end up at the:
} else if (dest_cpu < 1 || pending) {
branch. Which we'll take because we set pending earlier. Here we first
check if the task @p has already satisfied the affinity constraints,
if so we bail early [A]. Otherwise we'll reissue migration_cpu_stop()
onto the CPU that is now hosting our task @p:
stop_one_cpu_nowait(cpu_of(rq), migration_cpu_stop,
&pending->arg, &pending->stop_work);
Except, we've never initialized pending->arg, which will be all 0s.
This then results in running migration_cpu_stop() on the next CPU with
arg->p == NULL, which gives the by now obvious result of fireworks.
The cure is to change affine_move_task() to always use pending->arg,
furthermore we can use the exact same pattern as the
SCA_MIGRATE_ENABLE case, since we'll block on the pending->done
completion anyway, no point in adding yet another completion in
stop_one_cpu().
This then gives a clear distinction between the two
migration_cpu_stop() use cases:
- sched_exec() / migrate_task_to() : arg->pending == NULL
- affine_move_task() : arg->pending != NULL;
And we can have it ignore p->migration_pending when !arg->pending. Any
stop work from sched_exec() / migrate_task_to() is in addition to stop
works from affine_move_task(), which will be sufficient to issue the
completion.
Fixes: 6d337eab04 ("sched: Fix migrate_disable() vs set_cpus_allowed_ptr()")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210224131355.357743989@infradead.org
Commit
c9624cb7db ("x86/platform/uv: Update sysfs documentation")
misplaced the first line of a codeblock section, causing the reported
warning message:
Documentation/ABI/testing/sysfs-firmware-sgi_uv:2: WARNING: Unexpected indentation.
Move the misplaced line below the required blank line to remove the
warning message.
Fixes: c9624cb7db ("x86/platform/uv: Update sysfs documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Mike Travis <mike.travis@hpe.com>
Link: https://lkml.kernel.org/r/20210219182852.385297-1-justin.ernst@hpe.com
vc_decode_insn() calls copy_from_kernel_nofault() by way of
vc_fetch_insn_kernel() to fetch 15 bytes max of opcodes to decode.
copy_from_kernel_nofault() returns negative on error and 0 on success.
The error case is handled by returning ES_EXCEPTION.
In the success case, the ret variable which contains the return value is
0 so there's no need to subtract it from MAX_INSN_SIZE when initializing
the insn buffer for further decoding. Remove it.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20210223111130.16201-1-bp@alien8.de
Commit
8382c668ce ("x86/vdso: Add support for exception fixup in vDSO functions")
prints length "len" which is size_t.
Compilers now complain when building on a 32-bit host:
HOSTCC arch/x86/entry/vdso/vdso2c
...
In file included from arch/x86/entry/vdso/vdso2c.c:162:
arch/x86/entry/vdso/vdso2c.h: In function 'extract64':
arch/x86/entry/vdso/vdso2c.h:38:52: warning: format '%lu' expects argument of \
type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'}
So use proper modifier (%zu) for size_t.
[ bp: Massage commit message. ]
Fixes: 8382c668ce ("x86/vdso: Add support for exception fixup in vDSO functions")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/20210303064357.17056-1-jslaby@suse.cz
The mute and mic-mute LEDs on HP ZBook Studio G5 are controlled via
GPIO bits 0x10 and 0x20, respectively, and we need the extra setup for
those.
As the similar code is already present for other HP models but with
different GPIO pins, this patch factors out the common helper code and
applies those GPIO values for each model.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211893
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210306095018.11746-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.
Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add HID subsystem (TC=0x15) devices. These devices need to be registered
for 7th-generation Surface models. On previous generations, these
devices are either provided as platform devices via ACPI (Surface Laptop
1 and 2) or implemented as standard USB device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a driver to provide platform profile support on 5th- and later
generation Microsoft Surface devices with a Surface System Aggregator
Module. On those devices, the platform profile can be used to influence
cooling behavior and power consumption.
For example, the default 'quiet' profile limits fan noise and in turn
sacrifices performance of the discrete GPU found on Surface Books. Its
full performance can only be unlocked on the 'performance' profile.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210211201703.658240-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the detachment system (DTX) SSAM device for the Surface Book 3. This
device is accessible under the base (TC=0x11) subsystem.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the SSAM platform profile device to the SSAM device registry. This
device is accessible under the thermal subsystem (TC=0x03) and needs to
be registered for all Surface models.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add battery subsystem (TC=0x02) devices (battery and AC) to the SSAM
device registry. These devices need to be registered for 7th-generation
Surface models. On 5th- and 6th-generation models, these devices are
handled via the standard ACPI battery/AC interface, which in turn
accesses the same SSAM interface via the Surface ACPI Notify (SAN)
driver.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface Book 3 has a detachable base part. While the top part
(so-called clipboard) contains the CPU, touchscreen, and primary
battery, the base contains, among other things, a keyboard, touchpad,
and secondary battery.
Those devices do not react well to being accessed when the base part is
detached and should thus be removed and added in sync with the base. To
facilitate this, we introduce a virtual base device hub, which
automatically removes or adds the devices registered under it.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface System Aggregator Module (SSAM) subsystem provides various
functionalities, which are separated by spreading them across multiple
devices and corresponding drivers. Parts of that functionality / some of
those devices, however, can (as far as we currently know) not be
auto-detected by conventional means. While older (specifically 5th- and
6th-)generation models do advertise most of their functionality via
standard platform devices in ACPI, newer generations do not.
As we are currently also not aware of any feasible way to query said
functionalities dynamically, this poses a problem. There is, however, a
device in ACPI that seems to be used by Windows for identifying
different Surface models: The Windows Surface Integration Device (WSID).
This device seems to have a HID corresponding to the overall set of
functionalities SSAM provides for the associated model.
This commit introduces a registry providing non-detectable device
information via software nodes. In addition, a SSAM platform hub driver
is introduced, which takes care of creating and managing the SSAM
devices specified in this registry. This approach allows for a
hierarchical setup akin to ACPI and is easily extendable, e.g. via
firmware node properties.
Note that this commit only provides the basis for the platform hub and
registry, and does not add any content to it. The registry will be
expanded in subsequent commits.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When walking the page tables at a given level, and if the start
address for the range isn't aligned for that level, we propagate
the misalignment on each iteration at that level.
This results in the walker ignoring a number of entries (depending
on the original misalignment) on each subsequent iteration.
Properly aligning the address before the next iteration addresses
this issue.
Cc: stable@vger.kernel.org
Reported-by: Howard Zhang <Howard.Zhang@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Jia He <justin.he@arm.com>
Fixes: b1e57de62c ("KVM: arm64: Add stand-alone page-table walker infrastructure")
[maz: rewrite commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210303024225.2591-1-justin.he@arm.com
Message-Id: <20210305185254.3730990-9-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It looks like we have broken firmware out there that wrongly advertises
a GICv2 compatibility interface, despite the CPUs not being able to deal
with it.
To work around this, check that the CPU initialising KVM is actually able
to switch to MMIO instead of system registers, and use that as a
precondition to enable GICv2 compatibility in KVM.
Note that the detection happens on a single CPU. If the firmware is
lying *and* that the CPUs are asymetric, all hope is lost anyway.
Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20210305185254.3730990-8-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we are about to report a bit more information to the rest of
the kernel, rename __vgic_v3_get_ich_vtr_el2() to the more
explicit __vgic_v3_get_gic_config().
No functional change.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20210305185254.3730990-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running under a nesting hypervisor, it isn't guaranteed that
the virtual HW will include a PMU. In which case, let's not try
to access the PMU registers in the world switch, as that'd be
deadly.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210209114844.3278746-3-maz@kernel.org
Message-Id: <20210305185254.3730990-6-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently find out about the presence of a HW PMU (or the handling
of that PMU by perf, which amounts to the same thing) in a fairly
roundabout way, by checking the number of counters available to perf.
That's good enough for now, but we will soon need to find about about
that on paths where perf is out of reach (in the world switch).
Instead, let's turn kvm_arm_support_pmu_v3() into a static key.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210209114844.3278746-2-maz@kernel.org
Message-Id: <20210305185254.3730990-5-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When panicking from the nVHE hyp and restoring the host context, x29 is
expected to hold a pointer to the host context. This wasn't being done
so fix it to make sure there's a valid pointer the host context being
used.
Rather than passing a boolean indicating whether or not the host context
should be restored, instead pass the pointer to the host context. NULL
is passed to indicate that no context should be restored.
Fixes: a2e102e20f ("KVM: arm64: nVHE: Handle hyp panics")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Scull <ascull@google.com>
[maz: partial rewrite to fit 5.12-rc1]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210219122406.1337626-1-ascull@google.com
Message-Id: <20210305185254.3730990-4-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 7db2153047 ("KVM: arm64: Restore hyp when panicking in guest
context") tracks the currently running vCPU, clearing the pointer to
NULL on exit from a guest.
Unfortunately, the use of 'set_loaded_vcpu' clobbers x1 to point at the
kvm_hyp_ctxt instead of the vCPU context, causing the subsequent RAS
code to go off into the weeds when it saves the DISR assuming that the
CPU context is embedded in a struct vCPU.
Leave x1 alone and use x3 as a temporary register instead when clearing
the vCPU on the guest exit path.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Andrew Scull <ascull@google.com>
Cc: <stable@vger.kernel.org>
Fixes: 7db2153047 ("KVM: arm64: Restore hyp when panicking in guest context")
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210226181211.14542-1-will@kernel.org
Message-Id: <20210305185254.3730990-3-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The nVHE KVM hyp drains and disables the SPE buffer, before
entering the guest, as the EL1&0 translation regime
is going to be loaded with that of the guest.
But this operation is performed way too late, because :
- The owning translation regime of the SPE buffer
is transferred to EL2. (MDCR_EL2_E2PB == 0)
- The guest Stage1 is loaded.
Thus the flush could use the host EL1 virtual address,
but use the EL2 translations instead of host EL1, for writing
out any cached data.
Fix this by moving the SPE buffer handling early enough.
The restore path is doing the right thing.
Fixes: 014c4c77aa ("KVM: arm64: Improve debug register save/restore flow")
Cc: stable@vger.kernel.org
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210302120345.3102874-1-suzuki.poulose@arm.com
Message-Id: <20210305185254.3730990-2-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are PCI based systems, so not enabling the support is rather
pointless. Additionally the random configѕ generated by the build bot
for IP27 and IP30 builds without PCI fail to buіld.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Ensure this file has a prototype for phys_to_dma and dma_to_phys.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Ensure this file has a prototype for phys_to_dma and dma_to_phys.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following coccicheck warning:
./arch/mips/cavium-octeon/oct_ilm.c:65:0-23: WARNING:
reset_statistics_ops should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS doesn't have architecture-optimized bitsearching functions,
like find_{first,next}_bit() etc.
It's absolutely harmless to enable GENERIC_FIND_FIRST_BIT as this
functionality is not new at all and well-tested. It provides more
optimized code and saves some .text memory (32 R2):
add/remove: 4/1 grow/shrink: 1/53 up/down: 216/-372 (-156)
Users of for_each_set_bit() like hotpath gic_handle_shared_int()
will also benefit from this.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CPU_MIPS64 is supposed to be selected for CPUs that implement a revision
of the MIPS64 ISA. While it contains the generic ones, it forgot about
Octeon and Loongson in its list, which are indeed MIPS64 processors.
This commit adds these missing CPUs to the auto-selection list.
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: George Cherian <gcherian@marvell.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This board is used in Ubiquiti EdgeRouter 4.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When booting bmips with SMP enabled on a BCM6358 running on CPU #1 instead of
CPU #0, the current CPU mapping code produces the following:
- smp_processor_id(): 0
- cpu_logical_map(0): 1
- cpu_number_map(0): 1
This is because SMP isn't supported on BCM6358 since it has a shared TLB, so
it is disabled and max_cpus is decreased from 2 to 1.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is a Copyright line, and just a typo slipped through.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Previously it was not possible to achieve clock rates of 24.576MHz and
22.5792MHz, which are commonly required core clocks for the i2s
peripheral of v3s based SoCs.
Add support for those clock rates through the audio pll's sigma-delta
modulator.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210218112001.479018-2-t.schramm@manjaro.org
The Topwise A721/LY-F1 tablet is a tablet sold around 2012 under
different brands. The mainboard mentions A721 clearly, so this tablet
is best known under this name.
Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210224105240.47754-3-dev@pascalroeleven.nl
All IRQs that can be used to wake up the system must be routed through
r_intc, so they are visible to firmware while the system is suspended.
In addition to the external NMI input, which is already routed through
r_intc, these include PIO and R_PIO (gpio-keys), the LRADC, and the RTC.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The binding of R_INTC was updated to allow specifying interrupts other
than the external NMI, since routing those interrupts through the R_INTC
driver allows using them for wakeup.
Update the device trees to use the new binding.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
All IRQs that can be used to wake up the system must be routed through
r_intc, so they are visible to firmware while the system is suspended.
In addition to the external NMI input, which is already routed through
r_intc, these include PIO and R_PIO (gpio-keys), the LRADC, and the RTC.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The H3 and H5 SoCs have an additional interrupt controller in the RTC
power domain that can be used to enable wakeup for certain IRQs.
Add a node for it.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The binding of R_INTC was updated to allow specifying interrupts other
than the external NMI, since routing those interrupts through the R_INTC
driver allows using them for wakeup.
Update the device trees to use the new binding.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
- Fix corner cases in the rxe reference counting cleanup that are causing
regressions in blktests for SRP
- Two kdoc fixes so W=1 is clean
- Missing error return in error unwind for mlx5
- Wrong lock type nesting in IB CM
-----BEGIN PGP SIGNATURE-----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=j5ZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Nothing special here, though Bob's regression fixes for rxe would have
made it before the rc cycle had there not been such strong winter
weather!
- Fix corner cases in the rxe reference counting cleanup that are
causing regressions in blktests for SRP
- Two kdoc fixes so W=1 is clean
- Missing error return in error unwind for mlx5
- Wrong lock type nesting in IB CM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
RDMA/rxe: Fix missed IB reference counting in loopback
RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
RDMA/mlx5: Set correct kernel-doc identifier
IB/mlx5: Add missing error code
RDMA/rxe: Fix missing kconfig dependency on CRYPTO
RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
- Fix coding style issues (Jason Yan)
-----BEGIN PGP SIGNATURE-----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=oow8
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc-plugins fixes from Kees Cook:
"Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
been reported a couple times now by static analyzers, so best to get
them fixed to reduce the noise. :)
- Fix coding style issues (Jason Yan)"
* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: remove unneeded semicolon
gcc-plugins: structleak: remove unneeded variable 'ret'