Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm SC8380XP platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231025135943.13854-3-quic_sibis@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add missing wakeup-parent property, already used by DTS to indicate that
pins are wakeup capable:
sa8775p-ride.dtb: pinctrl@f000000: 'wakeup-parent' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231018145750.429385-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Clarify the procedure developer must follow to request privileges to
run tests on Freedesktop gitlab CI.
This measure was added to avoid untrusted people to misuse the
infrastructure.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Link: https://lore.kernel.org/r/20231024004525.169002-11-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Merge cpufreq updates for 6.7-rc1:
- Add support for several Qualcomm SoC versions and other similar
changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil
Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan
Gerhold and Varadarajan Narayanan).
- Clean up the tegra cpufreq driver (Sumit Gupta).
- Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob
Herring).
- Add support for TI's am62p5 Soc (Bryan Brattlof).
- Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian
Fainelli).
- Update Kconfig to mention i.MX7 as well (Alexander Stein).
- Revise global turbo disable check in intel_pstate (Srinivas
Pandruvada).
- Carry out initialization of sg_cpu in the schedutil cpufreq governor
in one loop (Liao Chang).
- Simplify the condition for storing 'down_threshold' in the
conservative cpufreq governor (Liao Chang).
- Use fine-grained mutex in the userspace cpufreq governor (Liao
Chang).
- Move is_managed indicator in the userspace cpufreq governor into a
per-policy structure (Liao Chang).
- Rebuild sched-domains when removing cpufreq driver (Pierre Gondois).
- Fix buffer overflow detection in trans_stats() (Christian Marangi).
* pm-cpufreq: (32 commits)
dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware
cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT
cpufreq: qcom-nvmem: add support for IPQ8064
cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu
cpufreq: qcom-nvmem: drop pvs_ver for format a fuses
dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu
cpufreq: qcom-nvmem: add support for IPQ6018
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018
cpufreq: qcom-nvmem: Add MSM8909
cpufreq: qcom-nvmem: Simplify driver data allocation
cpufreq: stats: Fix buffer overflow detection in trans_stats()
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible
cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQ
cpufreq: ti-cpufreq: Add opp support for am62p5 SoCs
cpufreq: dt-platdev: add am62p5 to blocklist
cpufreq: tegra194: remove redundant AND with cpu_online_mask
cpufreq: tegra194: use refclk delta based loop instead of udelay
cpufreq: tegra194: save CPU data to avoid repeated SMP calls
cpufreq: Rebuild sched-domains when removing cpufreq driver
cpufreq: userspace: Move is_managed indicator into per-policy structure
...
Merge devfreq updates for 6.7-rc1:
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to support
specific devices like UFS which handle multiple clocks through OPP
(Operationg Performance Point) framework (Manivannan Sadhasivam).
- Add perf support to the Rockchip DFI (DDR Monitor Module) devfreq-
event driver:
* Generalize rockchip-dfi.c to support new RK3568/RK3588 using
different DDR type (Sascha Hauer).
* Convert devicetree bidning document format to yaml (Sascha Hauer).
* Add perf support for DFI (a unit suitable for measuring DDR
utilization) to rockchip-dfi.c to extend DFI usage (Sascha Hauer).
- Add locking to the OPP handling code in the Mediatek CCI devfreq
driver, because the voltage of shared OPP might be changed by
multiple drivers (Mark Tseng, Dan Carpenter).
- Use device_get_match_data() in the Samsung Exynos PPMU devfreq-event
driver (Rob Herring).
* pm-devfreq: (26 commits)
dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
PM / devfreq: rockchip-dfi: add support for RK3588
PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
PM / devfreq: rockchip-dfi: make register stride SoC specific
PM / devfreq: rockchip-dfi: Add perf support
PM / devfreq: rockchip-dfi: give variable a better name
PM / devfreq: rockchip-dfi: Prepare for multiple users
PM / devfreq: rockchip-dfi: Pass private data struct to internal functions
PM / devfreq: rockchip-dfi: Handle LPDDR4X
PM / devfreq: rockchip-dfi: Handle LPDDR2 correctly
PM / devfreq: rockchip-dfi: Add RK3568 support
PM / devfreq: rockchip-dfi: Clean up DDR type register defines
PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines
PM / devfreq: rockchip-dfi: introduce channel mask
PM / devfreq: rockchip-dfi: Use free running counter
PM / devfreq: mediatek: unlock on error in mtk_ccifreq_target()
PM / devfreq: exynos-ppmu: Use device_get_match_data()
PM / devfreq: rockchip-dfi: dfi store raw values in counter struct
...
Merge ACPI bus type driver updates for 6.7-rc1:
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki).
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki).
* acpi-bus:
ACPI: bus: Add context argument to acpi_dev_install_notify_handler()
ACPI: docs: enumeration: Clarify ACPI bus concepts
Update ECAM size in the devicetree example to allow for the discovery of
up to 256 buses.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231016051102.1180432-3-thippeswamy.havalige@amd.com
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Support for DFI (DDR performance monitoring) for rk3588, rk3568 and an
enable-fix for rk3399 as well as some small fixups for the RGB30 handheld
(non-existent uart and better vpll frequency).
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmU4G4wQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgUs1B/9TgdZjfgHQyJXzDLGp/RDBumYK/sVz7hyE
OCMaWL2gH6P0HFC2DlAoNshyRmSLg7zUb6jzyB9efoKoCRlVbobyyrLxxzyp2eHY
YdHnSoG0wbWrj8mVMhI97Qz8dz0q6+EHJQhyl/puk42HJXXY89i4mJ6tbBO0J0kl
eNShVFB6vbLO6Ylc0h9pjz1Z/Cdg82Y6WfaHSyKt2OmRWUZRqJfGOw4Mx3D+tcs8
6/W5GAhAf5YHAAQDHRMs8seMDzHEne8Wv0h0ckIFnT6mmDbmsT7Kfabhs0oZ0gG1
L8RsGKIkK9P4UClJvZRDSF5Bz9wOm9sdsJQCQhck+/imcVO0fib/
=jpev
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Dtda
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
One new board the Turing RK1 system on module.
Support for DFI (DDR performance monitoring) for rk3588, rk3568 and an
enable-fix for rk3399 as well as some small fixups for the RGB30 handheld
(non-existent uart and better vpll frequency).
* tag 'v6.7-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add Turing RK1 SoM support
dt-bindings: arm: rockchip: Add Turing RK1
dt-bindings: vendor-prefixes: add turing
arm64: dts: rockchip: Add DFI to rk3588s
arm64: dts: rockchip: Add DFI to rk356x
arm64: dts: rockchip: Always enable DFI on rk3399
arm64: dts: rockchip: Remove UART2 from RGB30
arm64: dts: rockchip: Update VPLL Frequency for RGB30
Link: https://lore.kernel.org/r/2777623.BEx9A2HvPv@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert txt file to yaml.
Add a mainterner block. Took a value from dlg,da9063 PMIC.
Signed-off-by: Nik Bune <n2h9z4@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231014170434.159310-1-n2h9z4@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The MPTCP protocol allows sockets with no alive subflows to stay
in ESTABLISHED status for and user-defined timeout, to allow for
later subflows creation.
Currently such timeout is constant - TCP_TIMEWAIT_LEN. Let the
user-space configure them via a newly added sysctl, to better cope
with busy servers and simplify (make them faster) the relevant
pktdrill tests.
Note that the new know does not apply to orphaned MPTCP socket
waiting for the data_fin handshake completion: they always wait
TCP_TIMEWAIT_LEN.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-2-v1-1-9dc60939d371@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add PMC8380 compatibles for PMIC found in SC8380XP platform.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231025135550.13162-2-quic_sibis@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sc7180 can make use of the adsp-baked soundcard, add relevant compatible
to the documentation.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231020-sc7180-qdsp-sndcard-v1-1-157706b7d06f@trvn.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The main motivation is to repeat that dumb buffers should not be
abused for anything else than basic software rendering with KMS.
User-space devs are more likely to look at the IOCTL docs than to
actively search for the driver-oriented "Dumb Buffer Objects"
section.
v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and
DRM_CAP_DUMB_PREFER_SHADOW (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821131548.269204-1-contact@emersion.fr
Document the use of the "earlyprintk=bios[,keep]" kernel parameter
option on SuperH systems with a SuperH standard BIOS.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/febc920964f2f0919d21775132e84c5cc270177e.1697708489.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The superhyway bus driver was only referenced on SH4-202, which is now gone,
so remove it all as well.
I could find no trace of anything ever calling superhyway_register_driver(),
not in the git history but also not on the web, so I assume this has never
served any purpose on mainline kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-3-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
This reverts the following commits:
commit 53313ed25b ("dt-bindings: marvell: Add Marvell MV88E6060 DSA schema")
commit 0f35369b4e ("dt-bindings: marvell: Rewrite MV88E6xxx in schema")
commit 605a5f5d40 ("ARM64: dts: marvell: Fix some common switch mistakes")
commit bfedd84236 ("ARM: dts: nxp: Fix some common switch mistakes")
commit 2b83557a58 ("ARM: dts: marvell: Fix some common switch mistakes")
commit ddae07ce9b ("dt-bindings: net: mvusb: Fix up DSA example")
commit b5ef61718a ("dt-bindings: net: dsa: Require ports or ethernet-ports")
As repoted by Vladimir, it breaks boot on the Turris MOX board.
Link: https://lore.kernel.org/all/20231025093632.fb2qdtunzaznd73z@skbuf/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Detailed description for this pull request:
1. Update devfreq core
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs
to support the specific device like UFS which handle the multiple clocks
through OPP (Operationg Performance Point) framework.
2. Update the devfreq / devfreq-event drivers
- Add perf support to the Rockchip DFI(DDR Monitor Module) devfreq-event driver.
: Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type.
: Covert devicetree bidning document format to yaml.
: DFI is a unit which is suitable for measuring DDR utilization
for the DDR frequency scaling driver. Add perf support feature
to rockchip-dfi.c to extend DFI usage. The perf support has been tested
on a RK3568 and a RK3399.
- Protect the OPP handling code in critical section
because the voltage of shared OPP might be changed by multiple drivers
on Mediatek CCI devfreq driver.
- Use device_get_match_data() on Samsung Exynos PPMU devfreq-event driver.
-----BEGIN PGP SIGNATURE-----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=lh9c
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Merge devfreq updates for v6.7 from Chanwoo Choi:
" Detailed description for this pull request:
1. Update devfreq core
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs
to support the specific device like UFS which handle the multiple clocks
through OPP (Operationg Performance Point) framework.
2. Update the devfreq / devfreq-event drivers
- Add perf support to the Rockchip DFI(DDR Monitor Module) devfreq-event driver.
: Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type.
: Covert devicetree bidning document format to yaml.
: DFI is a unit which is suitable for measuring DDR utilization
for the DDR frequency scaling driver. Add perf support feature
to rockchip-dfi.c to extend DFI usage. The perf support has been tested
on a RK3568 and a RK3399.
- Protect the OPP handling code in critical section
because the voltage of shared OPP might be changed by multiple drivers
on Mediatek CCI devfreq driver.
- Use device_get_match_data() on Samsung Exynos PPMU devfreq-event driver."
* tag 'devfreq-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: (26 commits)
dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
PM / devfreq: rockchip-dfi: add support for RK3588
PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
PM / devfreq: rockchip-dfi: make register stride SoC specific
PM / devfreq: rockchip-dfi: Add perf support
PM / devfreq: rockchip-dfi: give variable a better name
PM / devfreq: rockchip-dfi: Prepare for multiple users
PM / devfreq: rockchip-dfi: Pass private data struct to internal functions
PM / devfreq: rockchip-dfi: Handle LPDDR4X
PM / devfreq: rockchip-dfi: Handle LPDDR2 correctly
PM / devfreq: rockchip-dfi: Add RK3568 support
PM / devfreq: rockchip-dfi: Clean up DDR type register defines
PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines
PM / devfreq: rockchip-dfi: introduce channel mask
PM / devfreq: rockchip-dfi: Use free running counter
PM / devfreq: mediatek: unlock on error in mtk_ccifreq_target()
PM / devfreq: exynos-ppmu: Use device_get_match_data()
PM / devfreq: rockchip-dfi: dfi store raw values in counter struct
...
Add under-voltage interrupt support. This can be used with simple
regulators having no other way to communicate an under-voltage event
except as by toggling some GPIO line.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231025084614.3092295-4-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
suspend/resume routines (Balsam Chihi)
- Fix probe for THERMAL_V2 for the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message in the max76620 driver when
thermal_of_zone_register() fails as the sub routine already show one
(Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible for the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() which is checking against
NULL instead of PTR_ERR() on the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in the thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl for the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for tegra124
(Rob Herring)
- Add mt7988 support for the Mediatek LVTS driver (Frank Wunderlich)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmU35s8ACgkQqDIjiipP
6E8nggf/VQei7x/fRTFRYJVyP6SdwzpZPcyMYEcwL50wpp/d/R5xapFzM7nofV6n
SYFXkpuejGH5d5JbJjpkv1S56Q/Bf6yy7cGciKiBmxaU2cWY636KmhlUPe2kfmX5
ipiNi/ZU0zAjZM7FRpBVPgp0HTvnGehDzIaSi6Y/vKVAw5TPTzjLz8oNoeHGP4/6
xNRgJuTwAvqL1lqZoo9YV7tVdkcuQamf3dkDkHqvSSL9UilHZEqrtLyh1Iz12+py
LESjlePz1jzK169oG5QiA4thIMV7CPTwkrkAJXwT2H2zWccg7JzZ7K1S3aJq2vHL
5UMcsUE2wCczfdnlhxD6wkJ3CDyirA==
=i0K9
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal control (ARM drivers mostly) updates for 6.7-rc1 from
Daniel Lezcano:
"- Add support for Mediatek LVTS MT8192 driver along with the
suspend/resume routines (Balsam Chihi)
- Fix probe for THERMAL_V2 for the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message in the max76620 driver when
thermal_of_zone_register() fails as the sub routine already show one
(Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible for the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() which is checking against
NULL instead of PTR_ERR() on the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in the thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl for the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for tegra124
(Rob Herring)
- Add mt7988 support for the Mediatek LVTS driver (Frank Wunderlich)"
* tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/qcom/tsens: Drop ops_v0_1
thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
thermal/drivers/mediatek: Fix probe for THERMAL_V2
thermal/drivers/max77620: Remove duplicate error message
dt-bindings: timer: add imx7d compatible
dt-bindings: net: microchip: Allow nvmem-cell usage
dt-bindings: imx-thermal: Add #thermal-sensor-cells property
dt-bindings: thermal: tsens: Add sa8775p compatible
thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
tools/thermal: Remove unused 'mds' and 'nrhandler' variables
dt-bindings: thermal: fsl,scu-thermal: Document imx8dl
thermal/drivers/imx8mm_thermal: Fix function pointer declaration by adding identifier name
dt-bindings: thermal: nvidia,tegra124-soctherm: Add missing unevaluatedProperties on child node schemas
thermal/drivers/mediatek/lvts_thermal: Add mt7988 support
thermal/drivers/mediatek/lvts_thermal: Make coeff configurable
dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
dt-bindings: thermal: mediatek: Add mt7988 lvts compatible
Add the awinic,aw88399 property to the awinic,aw88395.yaml file.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231025112625.959587-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the CPUFREQ Hardware on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Document newly introduced operating-points-v2-krait-cpu compatible to
the list of accepted compatible for opp-v2-kryo-cpu nodes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Marvell MV88E6060 is one of the oldest DSA switches from
Marvell, and it has DT bindings used in the wild. Let's define
them properly.
It is different enough from the rest of the MV88E6xxx switches
that it deserves its own binding.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is an attempt to rewrite the Marvell MV88E6xxx switch bindings
in YAML schema.
The current text binding says:
WARNING: This binding is currently unstable. Do not program it into a
FLASH never to be changed again. Once this binding is stable, this
warning will be removed.
Well that never happened before we switched to YAML markup,
we can't have it like this, what about fixing the mess?
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding a proper schema for the Marvell mx88e6xxx switch,
the scripts start complaining about this embedded example:
dtschema/dtc warnings/errors:
net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells'
is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells'
is a required property
from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml#
Fix this up by extending the example with those properties in
the ports node.
While we are at it, rename "ports" to "ethernet-ports" and rename
"switch" to "ethernet-switch" as this is recommended practice.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bindings using dsa.yaml#/$defs/ethernet-ports specify that
a DSA switch node need to have a ports or ethernet-ports
subnode, and that is actually required, so add requirements
using oneOf.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add wakeup-source property to enable Wake on Lan functionality in the
switch.
Since PME wake pin is not always attached to the SoC, use wakeup-source
instead of wakeup-gpios
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clarify that the Rust experiment is still going on to avoid
confusion for both kernel maintainers and end users.
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20231018160922.1018962-1-ojeda@kernel.org
[ Changed last paragraph as discussed in the mailing list. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-3-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The binding for the inno usb2 phy was given a name in more a common format,
so update the reference in rockchip,dwc3.yaml as well.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f8747552-d23b-c4cd-cb17-5033fb7f8eb6@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
this flag maps to GENL_UNS_ADMIN_PERM and will be used by future specs.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-1-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The common reserved-memory bindings have recently been copied from the
kernel tree into dtschema. The preference is to host common, stable
bindings in dtschema. As reserved-memory is documented in the DT Spec,
it meets the criteria.
The v2023.09 version of dtschema is what contains the reserved-memory
schemas we depend on, so bump the minimum version to that. Otherwise,
references to these schemas will generate errors.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20231013200851.347042-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Since commit bad3db104f ("ARM: imx: source gpt per clk from OSC for
system timer") osc_per can be used for clocking the GPT which is not
scaled when entering low bus mode.
This clock source is available only on i.MX6Q (incl. i.MX6QP) and i.MX6DL.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230810144451.1459985-7-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
Applying microcode late can be fatal for the running kernel when the
update changes functionality which is in use already in a non-compatible
way, e.g. by removing a CPUID bit.
There is no way for admins which do not have access to the vendors deep
technical support to decide whether late loading of such a microcode is
safe or not.
Intel has added a new field to the microcode header which tells the
minimal microcode revision which is required to be active in the CPU in
order to be safe.
Provide infrastructure for handling this in the core code and a command
line switch which allows to enforce it.
If the update is considered safe the kernel is not tainted and the annoying
warning message not emitted. If it's enforced and the currently loaded
microcode revision is not safe for late loading then the load is aborted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211724.079611170@linutronix.de
The MSM8917, MSM8937 and QM215 SoCs have VDDCX and VDDMX power domains
controlled in voltage level mode. Define the MSM8937 and QM215 power
domains as aliases because these SoCs are similar to MSM8917 and may
share some parts of the device tree.
Also add the compatibles for these SoCs to the documentation, with
qcom,msm8937-rpmpd using qcom,msm8917-rpmpd as a fallback compatible
because there are no known differences. QM215 is not compatible with
these because it uses different regulators.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231014133823.14088-2-otto.pflueger@abscue.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>