Move REG_GDM_FWD_CFG() register initialization in airoha_dev_init
routine. Moreover, always send traffic PPE module in order to be
processed by hw accelerator.
This is a preliminary patch to enable netfilter flowtable hw offloading
on EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the current codebase airoha_eth driver supports just a single
net_device connected to the Packet Switch Engine (PSE) lan port (GDM1).
As shown in commit 23020f0493 ("net: airoha: Introduce ethernet
support for EN7581 SoC"), PSE can switch packets between four GDM ports.
Enable the capability to create a net_device for each GDM port of the
PSE module. Moreover, since the QDMA blocks can be shared between
net_devices, do not stop TX/RX DMA in airoha_dev_stop() if there are
active net_devices for this QDMA block.
This is a preliminary patch to enable flowtable hw offloading for EN7581
SoC.
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Packet Processor Engine (PPE) module used for hw acceleration on EN7581
mac block, in order to properly parse packets, requires DSA untagged
packets on TX side and read DSA tag from DMA descriptor on RX side.
For this reason, enable RX Special Tag (SPTAG) for EN7581 SoC.
This is a preliminary patch to enable netfilter flowtable hw offloading
on EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Packet Processor Engine (PPE) module reads DSA tags from the DMA descriptor
and requires untagged DSA packets to properly parse them. Move DSA tag
in the DMA descriptor on TX side and read DSA tag from DMA descriptor
on RX side. In order to avoid skb reallocation, store tag in skb_dst on
RX side.
This is a preliminary patch to enable netfilter flowtable hw offloading
on EN7581 SoC.
Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move common airoha_eth register definitions in airoha_regs.h in order
to reuse them for Packet Processor Engine (PPE) codebase.
PPE module is used to enable support for flowtable hw offloading in
airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a preliminary patch to introduce flowtable hw offloading
support for airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move common airoha_eth definitions in airoha_eth.h in order to reuse
them for Packet Processor Engine (PPE) codebase.
PPE module is used to enable support for flowtable hw offloading in
airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The airoha_eth driver has no codebase shared with mtk_eth_soc one.
Moreover, the upcoming features (flowtable hw offloading, PCS, ..) will
not reuse any code from MediaTek driver. Move the Airoha driver in a
dedicated folder.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add quirk for a copper SFP that identifies itself as "FS" "SFP-10GM-T".
It uses RollBall protocol to talk to the PHY and needs 4 sec wait before
probing the PHY.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20250227071058.1520027-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna14-0052tT-S4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0z-0052tN-O1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0u-0052tH-KQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch from using the fix_mac_speed() hook to set_clk_tx_rate() to
manage the transmit clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0p-0052t8-Gn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert non-i.MX93 users to use the generic stmmac_set_clk_tx_rate() to
configure the MAC transmit clock rate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0k-0052t2-Cc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Note that given the current unpatched driver structure,
plat_dat->fix_mac_speed will always be populated with
kmb_eth_fix_mac_speed(), even when no clock is present. We preserve
this behaviour in this patch by always initialising plat_dat->clk_tx_i
and plat_dat->set_clk_tx_rate.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0f-0052sw-8r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0a-0052sq-59@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0V-0052sk-1L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the generic stmmac_set_clk_tx_rate() to configure the MAC transmit
clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0P-0052se-Tv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a generic implementation for the set_clk_tx_rate method
introduced by the previous patch, which is capable of configuring the
MAC transmit clock for 10M, 100M and 1000M speeds for at least MII,
GMII, RGMII and RMII interface modes.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0K-0052sY-QF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several stmmac sub-drivers which support RGMII follow the same pattern.
They calculate the transmit clock rate, and then call clk_set_rate().
Analysis of several implementation documents suggests that the platform
is responsible for providing the transmit clock to the DWMAC core's
clk_tx_i. The expected rates are:
10Mbps 100Mbps 1Gbps
MII 2.5MHz 25MHz
RMII 2.5MHz 25MHz
GMII 125MHz
RGMI 2.5MHz 25MHz 125MHz
It seems some platforms require this clock to be manually configured,
but there are outputs from the MAC core that indicate the speed, so a
platform may use these to automatically configure the clock. Thus, we
can't just provide one solution to configure this clock rate.
Moreover, the clock may need to be derived from one of several sources
depending on the interface mode.
Provide a platform hook that is passed the transmit clock, interface
mode and speed.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tna0F-0052sS-Lr@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the new health syndrome value to hsynd_str() function
to indicate that the device got a trust lockdown fault.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose crr bit in struct health buffer. When set, it indicates that
the error cannot be recovered without flow involving a cold reset.
Add its value to the health buffer info log.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently health buffer data is logged either when FW fatal error
detected or miss counter reached max misses threshold.
Log health buffer whenever new health syndrome is detected.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case health counter has not increased for few polling intervals, miss
counter will reach max misses threshold and health report will be
triggered for FW health reporter. In case syndrome found on same health
poll another health report will be triggered.
Avoid two health reports on same syndrome by marking this syndrome as
already known.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netlink error messages should not have a newline at the end of the
string.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-6-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink error messages should not have a newline at the end of the
string.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink error messages should not have a newline at the end of the
string.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, in case of Cilium, we run into users on Azure who require to use
tunneling for east/west traffic due to hitting IPAM API limits for Kubernetes
Pods if they would have gone with publicly routable IPs for Pods. In case
of tunneling, Cilium supports the option of vxlan or geneve. In order to
RSS spread flows among remote CPUs both derive a source port hash via
udp_flow_src_port() which takes the inner packet's skb->hash into account.
For clusters with many nodes, this can then hit a new limitation [0]: Today,
the Azure networking stack supports 1M total flows (500k inbound and 500k
outbound) for a VM. [...] Once this limit is hit, other connections are
dropped. [...] Each flow is distinguished by a 5-tuple (protocol, local IP
address, remote IP address, local port, and remote port) information. [...]
For vxlan and geneve, this can create a massive amount of UDP flows which
then run into the limits if stale flows are not evicted fast enough. One
option to mitigate this for vxlan is to narrow the source port range via
IFLA_VXLAN_PORT_RANGE while still being able to benefit from RSS. However,
geneve currently does not have this option and it spreads traffic across
the full source port range of [1, USHRT_MAX]. To overcome this limitation
also for geneve, add an equivalent IFLA_GENEVE_PORT_RANGE setting for users.
Note that struct geneve_config before/after still remains at 2 cachelines
on x86-64. The low/high members of struct ifla_geneve_port_range (which is
uapi exposed) are of type __be16. While they would be perfectly fine to be
of __u16 type, the consensus was that it would be good to be consistent
with the existing struct ifla_vxlan_port_range from a uapi consumer PoV.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://learn.microsoft.com/en-us/azure/virtual-network/virtual-machine-network-throughput [0]
Link: https://patch.msgid.link/20250226182030.89440-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in this particular case, we create a new `struct mlx5e_umr_wqe_hdr`
to enclose the header part of flexible structure `struct mlx5e_umr_wqe`.
This is, all the members except the flexible arrays `inline_mtts`,
`inline_klms` and `inline_ksms` in the anonymous union. We then replace
the header part with `struct mlx5e_umr_wqe_hdr hdr;` in `struct
mlx5e_umr_wqe`, and change the type of the object currently causing
trouble `umr_wqe` from `struct mlx5e_umr_wqe` to `struct
mlx5e_umr_wqe_hdr` --this last bit gets rid of the flex-array-in-the-middle
part and avoid the warnings.
Also, no new members should be added to `struct mlx5e_umr_wqe`, instead
any new members must be included in the header structure `struct
mlx5e_umr_wqe_hdr`. To enforce this, we use `static_assert()`, ensuring
that the memory layout of both the flexible structure and the newly
created header struct remain consistent.
The next step is to refactor the rest of the related code accordingly,
which means adding a bunch of `hdr.` wherever needed.
Lastly, we use `container_of()` whenever we need to retrieve a pointer
to the flexible structure `struct mlx5e_umr_wqe`.
So, with these changes, fix 125 of the following warnings:
drivers/net/ethernet/mellanox/mlx5/core/en.h:664:48: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/Z76HzPW1dFTLOSSy@kspp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With ipvs_reset() now done unconditionally in skb_scrub_packet()
we would then call the former twice netkit_prep_forward(). Thus
remove the now unnecessary explicit call.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250225212927.69271-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Fixes: c1e0230eea ("net: ti: icss-iep: Add IEP driver")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mtk_foe_entry_set_vlan() in mtk_ppe.c already supports double vlan
tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows
for 1 vlan tag, optionally in combination with pppoe and dsa tags.
However, mtk_foe_entry_set_vlan() only allows for setting the vlan id.
The protocol cannot be set, it is always ETH_P_8021Q, for inner and outer
tag. This patch adds QinQ support to mtk_flow_offload_replace(), only in
the case that both inner and outer tags are ETH_P_8021Q.
Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination
of PPPoE and Q-in-Q is not allowed.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20250225201509.20843-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we can bulk-allocate skbs from the NAPI cache, use that
function to do that in veth as well instead of direct allocation from
the kmem caches. veth uses NAPI and GRO, so this is both context-safe
and beneficial.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Building with W=1 shows a warning about xge_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/apm/xgene-v2/main.c:723:36: error: unused variable 'xge_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-2-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Building with W=1 shows a warning about hns_mdio_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/hisilicon/hns_mdio.c:631:36: error: unused variable 'hns_mdio_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We set the NAPI's IRQ number in ice_vsi_set_napi_queues(). Clear the
NAPI's IRQ in ice_vsi_clear_napi_queues().
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-4-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
irq_pool_alloc() debug print can print a null string.
Fix it by providing a default string to print.
Fixes: 71e084e264 ("net/mlx5: Allocating a pool of MSI-X vectors for SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501141055.SwfIphN0-lkp@intel.com/
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250225072608.526866-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restore the `trace_mlx5_esw_vport_qos_create` event when creating
the vport scheduling element. This trace event was lost during
refactoring.
Fixes: be034baba8 ("net/mlx5: Make vport QoS enablement more flexible for future extensions")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250225072608.526866-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabling vport QoS fails, the scheduling node was never freed,
causing a leak.
Add the missing free and reset the vport scheduling node pointer to
NULL.
Fixes: be034baba8 ("net/mlx5: Make vport QoS enablement more flexible for future extensions")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250225072608.526866-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
