mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-28 20:03:05 +00:00
1,269 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
7ee0490121 |
drm fixes for 6.9-rc1
core: - fix rounding in drm_fixp2int_round() bridge: - fix documentation for DRM_BRIDGE_OP_EDID sun4i: - fix 64-bit division on 32-bit architectures tests: - fix dependency on DRM_KMS_HELPER probe-helper: - never return negative values from .get_modes() plus driver fixes xe: - invalidate userptr vma on page pin fault - fail early on sysfs file creation error - skip VMA pinning on xe_exec if no batches nouveau: - clear bo resource bus after eviction - documentation fixes - don't check devinit disable on GSP amdgpu: - Freesync fixes - UAF IOCTL fixes - Fix mmhub client ID mapping - IH 7.0 fix - DML2 fixes - VCN 4.0.6 fix - GART bind fix - GPU reset fix - SR-IOV fix - OD table handling fixes - Fix TA handling on boards without display hardware - DML1 fix - ABM fix - eDP panel fix - DPPCLK fix - HDCP fix - Revert incorrect error case handling in ioremap - VPE fix - HDMI fixes - SDMA 4.4.2 fix - Other misc fixes amdkfd: - Fix duplicate BO handling in process restore -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmX833kACgkQDHTzWXnE hr4ZDA/8CC/jW8drOInD52pqPxtFrhLPZ/pD+Vz4BWkcLnzRiM2d5gM3z3/JE7xi BGcxmhPgwT/M9oZENRxtSf2uUV/RZ0OMj+Mpwnew1YpANwWBe8pKeiwbHA4A4qzP Z46VLK0+BXEjh0btC4RY/Ji6yEuNCNAh0FBWTaLYoakN8M1JAJCUYFrXeWp8gYVm 4yZETXO64iGNYy4wz9tD5fohC3xo1t9WRcskBV97uNrntDQlagoEdAnh1VF2K3yC SAwF3O8J60xh7osNx5YE4ENXynvh7UaAc75kliSsWoZKoTb1TFlyu8abE7NQRRXc 9fjzwB6tQ6BJRFpmQGF6RHAhuoddqm9nPaOYOfQ/wXbVV1ajYvXmK+eGhHfR6/VO YYzhXksd9LGX34RWAcs9lJbV+EjG4buYnSThkvCYcPs2Ys+JppwlPYSd9sC8vqgP 6D7slAoa8rh99WWz4mZ7ZuOveiOUS3Yzie5Vms2Dlwl/kHW5E1WpeEw+fXAqq08M m83whU2cod/oUvJtcuYFLoNAlhYYngVOI9XGgdM+eL/dpdKjTpyH9JHHEGj/Nejr W7Kts9CLLBShNKR8Wo2fyTu1n9dwY/eFVA1P48Mt03345G/fMNtPxy+M1Rt6LHQ2 fmeBSU1P6mqoFeji4xCRXdJ4oDveNnHlyW9J9QJGXG44mN89PCc= =EW4i -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel Pull drm fixes from Dave Airlie: "Fixes from the last week (or 3 weeks in amdgpu case), after amdgpu, it's xe and nouveau then a few scattered core fixes. core: - fix rounding in drm_fixp2int_round() bridge: - fix documentation for DRM_BRIDGE_OP_EDID sun4i: - fix 64-bit division on 32-bit architectures tests: - fix dependency on DRM_KMS_HELPER probe-helper: - never return negative values from .get_modes() plus driver fixes xe: - invalidate userptr vma on page pin fault - fail early on sysfs file creation error - skip VMA pinning on xe_exec if no batches nouveau: - clear bo resource bus after eviction - documentation fixes - don't check devinit disable on GSP amdgpu: - Freesync fixes - UAF IOCTL fixes - Fix mmhub client ID mapping - IH 7.0 fix - DML2 fixes - VCN 4.0.6 fix - GART bind fix - GPU reset fix - SR-IOV fix - OD table handling fixes - Fix TA handling on boards without display hardware - DML1 fix - ABM fix - eDP panel fix - DPPCLK fix - HDCP fix - Revert incorrect error case handling in ioremap - VPE fix - HDMI fixes - SDMA 4.4.2 fix - Other misc fixes amdkfd: - Fix duplicate BO handling in process restore" * tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel: (50 commits) drm/amdgpu/pm: Don't use OD table on Arcturus drm/amdgpu: drop setting buffer funcs in sdma442 drm/amd/display: Fix noise issue on HDMI AV mute drm/amd/display: Revert Remove pixle rate limit for subvp Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode" Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()" drm/amd/display: Add a dc_state NULL check in dc_state_release drm/amd/display: Return the correct HDCP error code drm/amd/display: Implement wait_for_odm_update_pending_complete drm/amd/display: Lock all enabled otg pipes even with no planes drm/amd/display: Amend coasting vtotal for replay low hz drm/amd/display: Fix idle check for shared firmware state drm/amd/display: Update odm when ODM combine is changed on an otg master pipe with no plane drm/amd/display: Init DPPCLK from SMU on dcn32 drm/amd/display: Add monitor patch for specific eDP drm/amd/display: Allow dirty rects to be sent to dmub when abm is active drm/amd/display: Override min required DCFCLK in dml1_validate drm/amdgpu: Bypass display ta if display hw is not available drm/amdgpu: correct the KGQ fallback message drm/amdgpu/pm: Check the validity of overdiver power limit ... |
||
José Roberto de Souza
|
dd8a07f06d |
drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC
Doing a XE_EXEC with num_batch_buffer == 0 makes signals passed as argument to be signaled when the last real XE_EXEC is completed. But to do that it was first pinning all VMAs in drm_gpuvm_exec_lock(), this patch remove this pinning as it is not required. This change also help Mesa implementing memory over-commiting recovery as it needs to unbind not needed VMAs when the whole VM can't fit in GPU memory but it can only do the unbiding when the last XE_EXEC is completed. So with this change Mesa can get the signal it want without getting out-of-memory errors. Fixes: |
||
Himal Prasad Ghimiray
|
d58b4ef63b |
drm/xe: Return if kobj creation is failed
Return after warning regarding kobj creation failure. Fixes: |
||
Matthew Brost
|
3860213943 |
drm/xe: Invalidate userptr VMA on page pin fault
Rather than return an error to the user or ban the VM when userptr VMA page pin fails with -EFAULT, invalidate VMA mappings. This supports the UMD use case of freeing userptr while still having bindings. Now that non-faulting VMs can invalidate VMAs, drop the usm prefix for the tile_invalidated member. v2: - Fix build error (CI) v3: - Don't invalidate VMA if in fault mode, rather kill VM (Thomas) - Update commit message with tile_invalidated name chagne (Thomas) - Wait VM bookkeep slots with VM resv lock (Thomas) v4: - Move list_del_init(&userptr.repin_link) after error check (Thomas) - Assert not in fault mode (Matthew) Fixes: |
||
|
Linus Torvalds
|
480e035fc4 |
drm for 6.9:
core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmXxI+AACgkQDHTzWXnE hr5isxAApZ+DxesDbV8bd91KXL03vTfJtM5xVQuZoDzrr20KdTvu2EfQcCFnAUjl YtY05U9arDT4Txq5nX70Xc6I5M9HN6lqSUfsWhI6xUcR9TUollPbYwEu8IdoMaCG TRnspkiheye+DLFY6omLNH2aG1/k1IIefVWKaClFpbNPaaSHREDiY7/rkmErMBIS hrN13+6IVzX7+6fmNgHugUfdyawDJ8J9Nsc8T3Zlioljq3p+VbtStLsGeABTHSEJ MX18FwbGllI+QcXvaXM8gIg8NYKvSx/ZtlvKTpyPpTjZT3i3BpY+7yJqWDRQhiGM VTX7di1f90yWgzlYE5T33MW7Imvw3q04N7qYJ+Z1LHD/A8VyjwPUKLeul8P9ousT 0qQLSQsnuXH5AMLDh8IeLG/i0hAMWJ2UbProFSAFhd/UQHP7QOm2mmCsf79me9It qKFn6QZKvAKGZk/myTbQIVAmQWrDCpKq4i1aoKXEvcEuQUtM1lPvmMVsStVEfG+y ACaI24zSJACViH6rfhVzr74giwZX/ay0NSXqwRXfD5kX8fXb050LxLGW93iYZoHv FpdT2C8oTS1A5nsZpoxwVP35euUsp7D4J5YYbrZder2m0s0DDCVLMqdFrSVNdWDM 4ZQRiY3wCiJjSS8dpwppW0uaVGjtnGQnjQ5sQrIw0vKkwxee0TQ= =WLj9 -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights are usual, more AMD IP blocks for future hw, i915/xe changes, Displayport tunnelling support for i915, msm YUV over DP changes, new tests for ttm, but its mostly a lot of stuff all over the place from lots of people. core: - EDID cleanups - scheduler error handling fixes - managed: add drmm_release_action() with tests - add ratelimited drm debug print - DPCD PSR early transport macro - DP tunneling and bandwidth allocation helpers - remove built-in edids - dp: Avoid AUX transfers on powered-down displays - dp: Add VSC SDP helpers cross drivers: - use new drm print helpers - switch to ->read_edid callback - gem: add stats for shared buffers plus updates to amdgpu, i915, xe syncobj: - fixes to waiting and sleeping ttm: - add tests - fix errno codes - simply busy-placement handling - fix page decryption media: - tc358743: fix v4l device registration video: - move all kernel parameters for video behind CONFIG_VIDEO sound: - remove <drm/drm_edid.h> include from header ci: - add tests for msm - fix apq8016 runner efifb: - use copy of global screen_info state vesafb: - use copy of global screen_info state simplefb: - fix logging bridge: - ite-6505: fix DP link-training bug - samsung-dsim: fix error checking in probe - samsung-dsim: add bsh-smm-s2/pro boards - tc358767: fix regmap usage - imx: add i.MX8MP HDMI PVI plus DT bindings - imx: add i.MX8MP HDMI TX plus DT bindings - sii902x: fix probing and unregistration - tc358767: limit pixel PLL input range - switch to new drm_bridge_read_edid() interface panel: - ltk050h3146w: error-handling fixes - panel-edp: support delay between power-on and enable; use put_sync in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings - add BOE TH101MB31IG002-28A plus DT bindings - add EDT ETML1010G3DRA plus DT bindings - add Novatek NT36672E LCD DSI plus DT bindings - nt36523: support 120Hz timings, fix includes - simple: fix display timings on RK32FN48H - visionox-vtdr6130: fix initialization - add Powkiddy RGB10MAX3 plus DT bindings - st7703: support panel rotation plus DT bindings - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs panel-orientation-quirks: - GPD Win Mini amdgpu: - Validate DMABuf imports in compute VMs - Add RAS ACA framework - PSP 13 fixes - Misc code cleanups - Replay fixes - Atom interpretor PS, WS bounds checking - DML2 fixes - Audio fixes - DCN 3.5 Z state fixes - Remove deprecated ida_simple usage - UBSAN fixes - RAS fixes - Enable seq64 infrastructure - DC color block enablement - Documentation updates - DC documentation updates - DMCUB updates - ATHUB 4.1 support - LSDMA 7.0 support - JPEG DPG support - IH 7.0 support - HDP 7.0 support - VCN 5.0 support - SMU 13.0.6 updates - NBIO 7.11 updates - SDMA 6.1 updates - MMHUB 3.3 updates - DCN 3.5.1 support - NBIF 6.3.1 support - VPE 6.1.1 support amdkfd: - Validate DMABuf imports in compute VMs - SVM fixes - Trap handler updates and enhancements - Fix cache size reporting - Relocate the trap handler radeon: - Atom interpretor PS, WS bounds checking - Misc code cleanups xe: - new query for GuC submission version - Remove unused persistent exec_queues - Add vram frequency sysfs attributes - Add the flag XE_VM_BIND_FLAG_DUMPABLE - Drop pre-production workarounds - Drop kunit tests for unsupported platforms - Start pumbling SR-IOV support with memory based interrupts for VF - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts - Add GuC Doorbells Manager as prep work SR-IOV - Implement additional workarounds for xe2 and MTL - Program a few registers according to perfomance guide spec for Xe2 - Fix remaining 32b build issues and enable it back - Fix build with CONFIG_DEBUG_FS=n - Fix warnings from GuC ABI headers - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF - Release mmap mappings on rpm suspend - Disable mid-thread preemption when not properly supported by hardware - Fix xe_exec by reserving extra fence slot for CPU bind - Fix xe_exec with full long running exec queue - Canonicalize addresses where needed for Xe2 and add to devcoredum - Toggle USM support for Xe2 - Only allow 1 ufence per exec / bind IOCTL - Add GuC firmware loading for Lunar Lake - Add XE_VMA_PTE_64K VMA flag i915: - Add more ADL-N PCI IDs - Enable fastboot also on older platforms - Early transport for panel replay and PSR - New ARL PCI IDs - DP TPS4 PHY test pattern support - Unify and improve VSC SDP for PSR and non-PSR cases - Refactor memory regions and improve debug logging - Rework global state serialization - Remove unused CDCLK divider fields - Unify HDCP connector logging format - Use display instead of graphics version in display code - Move VBT and opregion debugfs next to the implementation - Abstract opregion interface, use opaque type - MTL fixes - HPD handling fixes - Add GuC submission interface version query - Atomically invalidate userptr on mmu-notifier - Update handling of MMIO triggered reports - Don't make assumptions about intel_wakeref_t type - Extend driver code of Xe_LPG to Xe_LPG+ - Add flex arrays to struct i915_syncmap - Allow for very slow HuC loading - DP tunneling and bandwidth allocation support msm: - Correct bindings for MSM8976 and SM8650 platforms - Start migration of MDP5 platforms to DPU driver - X1E80100 MDSS support - DPU: - Improve DSC allocation, fixing several important corner cases - Add support for SDM630/SDM660 platforms - Simplify dpu_encoder_phys_ops - Apply fixes targeting DSC support with a single DSC encoder - Apply fixes for HCTL_EN timing configuration - X1E80100 support - Add support for YUV420 over DP - GPU: - fix sc7180 UBWC config - fix a7xx LLC config - new gpu support: a305B, a750, a702 - machine support: SM7150 (different power levels than other a618) - a7xx devcoredump support habanalabs: - configure IRQ affinity according to NUMA node - move HBM MMU page tables inside the HBM - improve device reset - check extended PCIe errors ivpu: - updates to firmware API - refactor BO allocation imx: - use devm_ functions during init hisilicon: - fix EDID includes mgag200: - improve ioremap usage - convert to struct drm_edid - Work around PCI write bursts nouveau: - disp: use kmemdup() - fix EDID includes - documentation fixes qaic: - fixes to BO handling - make use of DRM managed release - fix order of remove operations rockchip: - analogix_dp: get encoder port from DT - inno_hdmi: support HDMI for RK3128 - lvds: error-handling fixes ssd130x: - support SSD133x plus DT bindings tegra: - fix error handling tilcdc: - make use of DRM managed release v3d: - show memory stats in debugfs - Support display MMU page size vc4: - fix error handling in plane prepare_fb - fix framebuffer test in plane helpers virtio: - add venus capset defines vkms: - fix OOB access when programming the LUT - Kconfig improvements vmwgfx: - unmap surface before changing plane state - fix memory leak in error handling - documentation fixes - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid - fix null-pointer deref in execbuf - refactor display-mode probing - fix fencing for creating cursor MOBs - fix cursor-memory lifetime xlnx: - fix live video input for ZynqMP DPSUB lima: - fix memory leak loongson: - fail if no VRAM present meson: - switch to new drm_bridge_read_edid() interface renesas: - add RZ/G2L DU support plus DT bindings mxsfb: - Use managed mode config sun4i: - HDMI: updates to atomic mode setting mediatek: - Add display driver for MT8188 VDOSYS1 - DSI driver cleanups - Filter modes according to hardware capability - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip etnaviv: - enhancements for NPU and MRT support" * tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits) drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo drm/amd/pm: wait for completion of the EnableGfxImu message drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1 drm/amdgpu: add smu 14.0.1 support drm/amdgpu: add VPE 6.1.1 discovery support drm/amdgpu/vpe: add VPE 6.1.1 support drm/amdgpu/vpe: don't emit cond exec command under collaborate mode drm/amdgpu/vpe: add collaborate mode support for VPE drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE drm/amdgpu/vpe: add multi instance VPE support drm/amdgpu/discovery: add nbif v6_3_1 ip block drm/amdgpu: Add nbif v6_3_1 ip block support drm/amdgpu: Add pcie v6_1_0 ip headers (v5) drm/amdgpu: Add nbif v6_3_1 ip headers (v5) arch/powerpc: Remove <linux/fb.h> from backlight code macintosh/via-pmu-backlight: Include <linux/backlight.h> fbdev/chipsfb: Include <linux/backlight.h> drm/etnaviv: Restore some id values drm/amdkfd: make kfd_class constant drm/amdgpu: add ring timeout information in devcoredump ... |
||
|
Linus Torvalds
|
07abb19a9b |
Power management updates for 6.9-rc1
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
- Fix a couple of warnings in the OPP core code related to W=1
builds (Viresh Kumar).
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg).
-----BEGIN PGP SIGNATURE-----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=UePT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
||
|
Linus Torvalds
|
97ec9715a8 |
linux_kselftest-kunit-6.9-rc1
This KUnit next update for Linux 6.9-rc1 consists of:
-- fix to make kunit_bus_type const
-- kunit tool change to Print UML command
-- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching
from using a platform_device, to a dedicated bus and device type
used by kunit. kunit devices don't set DMA mask and this caused
regression on some drm tests as they can't allocate DMA buffers.
Fix this problem by setting DMA masks on the kunit device during
initialization.
-- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit
log macros) already use the __printf() gcc attribute to ensure
the format specifiers are valid, but those which could fail the
test, and hence used __kunit_do_failed_assertion() behind the scenes,
did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A 9 patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
-----BEGIN PGP SIGNATURE-----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=ilEb
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
|
||
Rafael J. Wysocki
|
7874b581c7 |
Merge branch 'pm-runtime'
Merge changes related to the runtime power management of devices for 6.9-rc1: - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus). - Add a tracepoint for runtime_status changes tracking (Vilas Bhat). - Fix section title markdown in the runtime PM documentation (Yiwei Lin). * pm-runtime: Documentation: PM: Fix runtime_pm.rst markdown syntax PM: runtime: add tracepoint for runtime_status changes PM: runtime: Add pm_runtime_put_autosuspend() replacement PM: runtime: Simplify pm_runtime_get_if_active() usage |
||
Rodrigo Vivi
|
a4e7596e20 |
drm/xe: Return immediately on tile_init failure
There's no reason to proceed with applying workaround and initing sysfs if we are going to abort the probe upon failure. Fixes: |
||
Dafna Hirschfeld
|
e62d2e0078 |
drm/xe: Replace 'grouped target' in Makefile with pattern rule
Since 'grouped target' is used only in 'make' 4.3, it should be avoided. Replace it with 'multi-target pattern rule' which has the same behavior. Fixes: |
||
|
Matthew Brost
|
f7da398935 |
drm/xe: Fix ref counting leak on page fault
If a page fault occurs on VM not in fault a ref can be leaked. Fix this. Fixes: |
||
Mika Kuoppala
|
c6f6750bd2 |
drm/xe: Remove obsolete async_ops from struct xe_vm
When sync binds were reworked and worker removed, async_ops became obsolete. Remove it. Fixes: |
||
Zhanjun Dong
|
9eeeed8d7e |
drm/xe/guc: Fix missing topology init
init_steering_dss need topology dss mask to be init ahead. Fixed by moving xe_gt_topology_init ahead of xe_gt_mcr_init Fixes: |
||
Arnd Bergmann
|
45cfade303 |
drm/xe/xe2: fix 64-bit division in pte_update_size
This function does not build on 32-bit targets when the compiler fails to reduce DIV_ROUND_UP() into a shift: ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by xe_migrate.c >>> drivers/gpu/drm/xe/xe_migrate.o:(pte_update_size) in archive vmlinux.a There are two instances in this function. Change the first to use an open-coded shift with the same behavior, and the second one to a 32-bit calculation, which is sufficient here as the size is never more than 2^32 pages (16TB). Fixes: |
||
|
Arnd Bergmann
|
d1d95985ab |
drm/xe/kunit: fix link failure with built-in xe
When the driver is built-in but the tests are in loadable modules, the helpers don't actually get put into the driver: ERROR: modpost: "xe_kunit_helper_alloc_xe_device" [drivers/gpu/drm/xe/tests/xe_test.ko] undefined! Change the Makefile to ensure they are always part of the driver even when the rest of the kunit tests are in loadable modules. Fixes: |
||
Priyanka Dandamudi
|
8188cae3cc |
drm/xe/xe_trace: Add move_lacks_source detail to xe_bo_move trace
Add move_lacks_source detail to xe_bo_move trace to make it readable that is to check if it is migrate clear or migrate copy. Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: |
||
|
Mika Kuoppala
|
785f4cc068 |
drm/xe: Deny unbinds if uapi ufence pending
If user fence was provided for MAP in vm_bind_ioctl
and it has still not been signalled, deny UNMAP of said
vma with EBUSY as long as unsignalled fence exists.
This guarantees that MAP vs UNMAP sequences won't
escape under the radar if we ever want to track the
client's state wrt to completed and accessible MAPs.
By means of intercepting the ufence release signalling.
v2: find ufence with num_fences > 1 (Matt)
v3: careful on clearing vma ufence (Matt)
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1159
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215181152.450082-3-mika.kuoppala@linux.intel.com
(cherry picked from commit
|
||
|
Mika Kuoppala
|
86b3cd6d07 |
drm/xe: Expose user fence from xe_sync_entry
By allowing getting reference to user fence, we can
control the lifetime outside of sync entries.
This is needed to allow vma to track the associated
user fence that was provided with bind ioctl.
v2: xe_user_fence can be kept opaque (Jani, Matt)
v3: indent fix (Matt)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215181152.450082-2-mika.kuoppala@linux.intel.com
(cherry picked from commit
|
||
Lucas De Marchi
|
4ca5c82988 |
drm/xe: Use pointers in trace events
Commit |
||
|
Priyanka Dandamudi
|
a09946a9a9 |
drm/xe/xe_bo_move: Enhance xe_bo_move trace
Enhanced xe_bo_move trace to be more readable.
It will help to show the migration details.
Src and dst details.
v2: Modify trace_xe_bo_move(), it takes the integer mem_type
rather than a string.
Make mem_type_to_name() extern, it will be used by trace.(Thomas)
v3: Move mem_type_to_name() to xe_bo.[ch] (Thomas, Matt)
v4: Add device details to reduce ambiquity related to vram0/vram1. (Oak)
v5: Rename mem_type_to_name to xe_mem_type_to_name. (Thomas)
v6: Optimised code to use xe_bo_device(__entry->bo). (Thomas)
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Kempczynski Zbigniew <Zbigniew.Kempczynski@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Brian Welty <brian.welty@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220044748.948496-1-priyanka.dandamudi@intel.com
(cherry picked from commit
|
||
|
Arnd Bergmann
|
12cb2b21c2 |
drm/xe/mmio: fix build warning for BAR resize on 32-bit
clang complains about a nonsensical test on builds with a 32-bit phys_addr_t,
which means resizing will always fail:
drivers/gpu/drm/xe/xe_mmio.c:109:23: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
109 | root_res->start > 0x100000000ull)
| ~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
Previously, BAR resize was always disallowed on 32-bit kernels, but
this apparently changed recently. Since 32-bit machines can in theory
support PAE/LPAE for large address spaces, this may end up useful,
so change the driver to shut up the warning but still work when
phys_addr_t/resource_size_t is 64 bit wide.
Fixes:
|
||
Paulo Zanoni
|
14d4d0ad0a |
drm/xe: get rid of MAX_BINDS
Mesa has been issuing a single bind operation per ioctl since xe.ko changed to GPUVA due xe.ko bug #746. If I change Mesa to try again to issue every single bind operation it can in the same ioctl, it hits the MAX_BINDS assertion when running Vulkan conformance tests. Test dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8 issues 960 bind operations in a single ioctl, it's the most I could find in the conformance suite. I don't see a reason to keep the MAX_BINDS restriction: it doesn't seem to be preventing any specific issue. If the number is too big for the memory allocations, then those will fail. Nothing related to num_binds seems to be using the stack. Let's just get rid of it. Fixes: |
||
|
Matthew Brost
|
a41f6b0db5 |
drm/xe: Use vmalloc for array of bind allocation in bind IOCTL
Use vmalloc in effort to allow a user pass in a large number of binds in an IOCTL (mesa use case). Also use array allocations rather open coding the size calculation. v2: Use __GFP_ACCOUNT for allocations (Thomas) Fixes: |
||
|
Matthew Brost
|
ccff0b21eb |
drm/xe: Don't support execlists in xe_gt_tlb_invalidation layer
The xe_gt_tlb_invalidation layer implements TLB invalidations for a GuC backend. Simply return if in execlists mode. A follow up may properly implement the xe_gt_tlb_invalidation layer for both GuC and execlists. Fixes: |
||
|
Matthew Brost
|
dc15bd0aa7 |
drm/xe: Fix execlist splat
Although execlist submission is not supported it should be kept in a basic working state as it can be used for very early hardware bring up. Fix the below splat. WARNING: CPU: 3 PID: 11 at drivers/gpu/drm/xe/xe_execlist.c:217 execlist_run_job+0x1c2/0x220 [xe] Modules linked in: xe drm_kunit_helpers drm_gpuvm drm_ttm_helper ttm drm_exec drm_suballoc_helper drm_buddy gpu_sched mei_pxp mei_hdcp wmi_bmof x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core video snd_pcm mei_me mei wmi fuse e1000e i2c_i801 ptp i2c_smbus pps_core intel_lpss_pci CPU: 3 PID: 11 Comm: kworker/u16:0 Tainted: G U 6.8.0-rc3-guc+ #1046 Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.3243.A01.2006102133 06/10/2020 Workqueue: rcs0 drm_sched_run_job_work [gpu_sched] RIP: 0010:execlist_run_job+0x1c2/0x220 [xe] Code: 8b f8 03 00 00 4c 89 39 e9 e2 fe ff ff 49 8d 7d 20 be ff ff ff ff e8 ed fd a6 e1 85 c0 0f 85 e1 fe ff ff 0f 0b e9 da fe ff ff <0f> 0b 0f 0b 41 83 fc 03 0f 86 8a fe ff ff 0f 0b e9 83 fe ff ff be RSP: 0018:ffffc9000013bdb8 EFLAGS: 00010246 RAX: ffff888105021a00 RBX: ffff888105078400 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc9000013bd14 RDI: ffffc90001609090 RBP: ffff88811e3f0040 R08: 0000000000000088 R09: 00000000ffffff81 R10: 0000000000000001 R11: ffff88810c10c000 R12: 00000000fffffffe R13: ffff888109b72c28 R14: ffff8881050784a0 R15: ffff888105078408 FS: 0000000000000000(0000) GS:ffff88849f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000563459d130f8 CR3: 000000000563a001 CR4: 0000000000f70ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x7f/0x170 ? execlist_run_job+0x1c2/0x220 [xe] ? report_bug+0x1c7/0x1d0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? execlist_run_job+0x1c2/0x220 [xe] ? execlist_run_job+0x2c/0x220 [xe] drm_sched_run_job_work+0x246/0x3f0 [gpu_sched] ? process_one_work+0x18d/0x4e0 process_one_work+0x1f7/0x4e0 worker_thread+0x1da/0x3e0 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x130 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Fixes: |
||
Francois Dugast
|
eaa367a031 |
drm/xe/uapi: Remove unused flags
Those cases missed in previous uAPI cleanups were mostly accidentally brought in from i915 or created to exercise the possibilities of gpuvm but they are not used by userspace yet, so let's remove them. They can still be brought back later if needed. v2: - Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty) - Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza) - Ensure invalid flag values are rejected (Rodrigo Vivi) v3: Rebase after removal of persistent exec_queues (Francois Dugast) v4: Rodrigo: Rebase after the new dumpable flag. Fixes: |
||
Maarten Lankhorst
|
7e10d87e63 |
drm/xe: Add uapi for dumpable bos
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this
mapping should be dumped.
This is not hooked up, but the uapi should be ready before merging.
It's likely easier to dump the contents of the bo's at devcoredump
readout time, so it's better if the bos will stay unmodified after
a hang. The NEEDS_CPU_MAPPING flag is removed as requirement.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com
(cherry picked from commit
|
||
David Gow
|
689a930b93 |
drm/xe/tests: Fix printf format specifiers in xe_migrate test
KUNIT_FAIL() is used to fail the xe_migrate test when an error occurs.
However, there's a mismatch in the format specifier: '%li' is used to
log 'err', which is an 'int'.
Use '%i' instead of '%li', and for the case where we're printing an
error pointer, just use '%pe', instead of extracting the error code
manually with PTR_ERR(). (This also results in a nicer output when the
error code is known.)
Fixes:
|
||
Daniel Vetter
|
19b232b9d5 |
drm/xe feature pull for v6.9:
UAPI Changes: - New query to the GuC firmware submission version. (José Roberto de Souza) - Remove unused persistent exec_queues (Thomas Hellström) - Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi) - Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping should be dumped (Maarten Lankhorst) Cross-drivers Changes: - Make sure intel_wakeref_t is treated as opaque type on i915-display and fix its type on xe Driver Changes: - Drop pre-production workarounds (Matt Roper) - Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi) - Start pumbling SR-IOV support with memory based interrupts for VF (Michal Wajdeczko) - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko) - Improve logging with GT-oriented drm_printers (Michal Wajdeczko) - Add GuC Doorbells Manager as prep work SR-IOV during VF provisioning ((Michal Wajdeczko) - Refactor fake device handling in kunit integration ((Michal Wajdeczko) - Implement additional workarounds for xe2 and MTL (Tejas Upadhyay, Lucas De Marchi, Shekhar Chauhan, Karthik Poosa) - Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan) - Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio) - Fix remaining 32b build issues and enable it back (Lucas De Marchi) - Fix build with CONFIG_DEBUG_FS=n (Jani Nikula) - Fix warnings from GuC ABI headers (Matthew Brost) - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko) - Add mocs reset kunit (Ruthuvikas Ravikumar) - Fix spellings (Colin Ian King) - Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das) - Release mmap mappings on rpm suspend (Badal Nilawar) - Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld) - Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost) - Fix xe_exec with full long running exec queue, now returning -EWOULDBLOCK to userspace (Matthew Brost) - Fix CT irq handler when CT is disabled (Matthew Brost) - Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström) - Fix missing __iomem annotations (Thomas Hellström) - Fix exec queue priority handling with GuC (Brian Welty) - Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar) - Fix C6 disabling without SLPC (Matt Roper) - Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney) - Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann) - Refactor exec_queue user extensions handling and fix USM attributes being applied too late (Brian Welty) - Use circ_buf head/tail convention (Matthew Brost) - Fail build if circ_buf-related defines are modified with incompatible values (Matthew Brost) - Fix several error paths (Dan Carpenter) - Fix CCS copy for small VRAM copy chunks (Thomas Hellström) - Rework driver initialization order and paths to account for driver running in VF mode (Michal Wajdeczko) - Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski) - Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper) - Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty) - Drop display dependency on CONFIG_EXPERT (Jani Nikula) - Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko) - Stop creating one kunit module per kunit suite (Lucas De Marchi) - Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko) - Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko) - Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio) - Fix size calculation when writing pgtable (Fei Yang) - Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai) - Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi) - Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration (Himal Prasad Ghimiray) - Fix error path in xe_vm_create (Moti Haimovski) - Fix warnings in doc generation (Thomas Hellström, Badal Nilawar) - Improve devcoredump content for mesa debugging (José Roberto de Souza) - Fix crash in trace_dma_fence_init() (José Roberto de Souza) - Improve CT state change handling (Matthew Brost) - Toggle USM support for Xe2 (Lucas De Marchi) - Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza) - Canonicalize addresses where needed for Xe2 and add to devcoredump (José Roberto de Souza) - Only allow 1 ufence per exec / bind IOCTL (Matthew Brost) - Move all display code to display/ (Jani Nikula) - Fix sparse warnings by correctly using annotations (Thomas Hellström) - Warn on job timeouts instead of using asserts (Matt Roper) - Prefix macros to avoid clashes with sparc (Matthew Brost) - Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström) - Add status check during gsc header readout (Suraj Kandpal) - Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost) - Fix fence refcounting (Matthew Brost) - Fix picking incorrect userptr VMA (Matthew Brost) - Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost) - Fix double initialization of display power domains (Xiaoming Wang) - Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison) - Bump minimum GuC version to 70.19.2 for all platforms under force-probe (John Harrison) - Add GuC firmware loading for Lunar Lake (John Harrison) - Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das) - Fix max page size of VMA during a REMAP (Matthew Brost) - Don't ignore error when pinning pages in kthread (Matthew Auld) - Refactor xe hwmon (Karthik Poosa) - Add debug logs for D3cold (Riana Tauro) - Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost) - Always allow to override firmware blob with module param and improve log when no firmware is found (Lucas De Marchi) - Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström) - Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström) - Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman) - Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld) - Prefer drm_dbg() over dev_dbg() (Jani Nikula) - Avoid function cast warnings with clang-16 (Arnd Bergmann) - Enhance xe_bo_move trace (Priyanka Dandamudi) - Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost) - Add XE_VMA_PTE_64K VMA flag (Matthew Brost) - Return 2MB page size for compact 64k PTEs (Matthew Brost) - Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET) - Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit) - Drop extra newline in from sysfs files (Ashutosh Dixit) - Implement VM snapshot support for BO's and userptr (Maarten Lankhorst) - Add debug logs when skipping rebinds (Matthew Brost) - Fix code generation when mixing build directories (Dafna Hirschfeld) - Prefer struct_size over open coded arithmetic (Erick Archer) -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEE6rM8lpABPHM5FqyDm6KlpjDL6lMFAmXcAGgZHGx1Y2FzLmRl bWFyY2hpQGludGVsLmNvbQAKCRCboqWmMMvqU2jqD/9fSUzZbjGERgWjYoBbJ0LN SfF4kWdK1AJ5j/+cC1DkD8/lc2rkM0sNPC2e/b7n78luKcPyXcXmYaB0nJJhFPNs OSe0jM065pOEv8g55clVTpDBerzupEUkpOdFCMFvZLZ+5WHtG3GwG9qnlOw/tcvD +ATVfaaSizhy7gzqPoJTvUTLshvW+HlE/Xr7CSx9u1zRNRuYDUPk0XbSyfaj1y7i m3GiOdnlW8awG9jWKnst9KK8HL7Lf1t5cuWOgMivMIai4ftZZ7Fb3Ww4DtcCSnmU zkvUGD2ZXWfEdCh8mezDLC2tlQaCk//0kqyqq9p1aJv/m4k9GMiNtuH6AM3xbJam /KlMkWoFwD1Hxy2uTyvgB9RGQJBJ3w3To6nIwj4CvOpvlsKI22iLOddldWmZoBjj V4oYixt+PNkA6cgLiLzScuMFiSZz78RrAr7XilWlD9VLTcHoz65dSmB5tguIJkfD GNpLdD8W9ws1AmNPKHvVar9c3L2qL9KU/WN5GUCzU1Tku4+paMLPyAQ5sTpMGZk2 8zn9qkOnomXspcq6+B0MJeyjBGYtiTBw1mEldNcUny2W115poSbTdZLEEngd/9vF Vi2dNYydRVHGbxVeCpno1VfzVO+SDBCfiMWNdQznmBHZybHnwj+/9vgMQEMeXI/V 4KoPrhI/Qd8dCL0bHyUstA== =nLHY -----END PGP SIGNATURE----- Merge tag 'drm-xe-next-2024-02-25' of ssh://gitlab.freedesktop.org/drm/xe/kernel into drm-next drm/xe feature pull for v6.9: UAPI Changes: - New query to the GuC firmware submission version. (José Roberto de Souza) - Remove unused persistent exec_queues (Thomas Hellström) - Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi) - Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping should be dumped (Maarten Lankhorst) Cross-drivers Changes: - Make sure intel_wakeref_t is treated as opaque type on i915-display and fix its type on xe Driver Changes: - Drop pre-production workarounds (Matt Roper) - Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi) - Start pumbling SR-IOV support with memory based interrupts for VF (Michal Wajdeczko) - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko) - Improve logging with GT-oriented drm_printers (Michal Wajdeczko) - Add GuC Doorbells Manager as prep work SR-IOV during VF provisioning ((Michal Wajdeczko) - Refactor fake device handling in kunit integration ((Michal Wajdeczko) - Implement additional workarounds for xe2 and MTL (Tejas Upadhyay, Lucas De Marchi, Shekhar Chauhan, Karthik Poosa) - Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan) - Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio) - Fix remaining 32b build issues and enable it back (Lucas De Marchi) - Fix build with CONFIG_DEBUG_FS=n (Jani Nikula) - Fix warnings from GuC ABI headers (Matthew Brost) - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko) - Add mocs reset kunit (Ruthuvikas Ravikumar) - Fix spellings (Colin Ian King) - Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das) - Release mmap mappings on rpm suspend (Badal Nilawar) - Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld) - Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost) - Fix xe_exec with full long running exec queue, now returning -EWOULDBLOCK to userspace (Matthew Brost) - Fix CT irq handler when CT is disabled (Matthew Brost) - Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström) - Fix missing __iomem annotations (Thomas Hellström) - Fix exec queue priority handling with GuC (Brian Welty) - Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar) - Fix C6 disabling without SLPC (Matt Roper) - Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney) - Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann) - Refactor exec_queue user extensions handling and fix USM attributes being applied too late (Brian Welty) - Use circ_buf head/tail convention (Matthew Brost) - Fail build if circ_buf-related defines are modified with incompatible values (Matthew Brost) - Fix several error paths (Dan Carpenter) - Fix CCS copy for small VRAM copy chunks (Thomas Hellström) - Rework driver initialization order and paths to account for driver running in VF mode (Michal Wajdeczko) - Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski) - Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper) - Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty) - Drop display dependency on CONFIG_EXPERT (Jani Nikula) - Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko) - Stop creating one kunit module per kunit suite (Lucas De Marchi) - Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko) - Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko) - Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio) - Fix size calculation when writing pgtable (Fei Yang) - Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai) - Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi) - Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration (Himal Prasad Ghimiray) - Fix error path in xe_vm_create (Moti Haimovski) - Fix warnings in doc generation (Thomas Hellström, Badal Nilawar) - Improve devcoredump content for mesa debugging (José Roberto de Souza) - Fix crash in trace_dma_fence_init() (José Roberto de Souza) - Improve CT state change handling (Matthew Brost) - Toggle USM support for Xe2 (Lucas De Marchi) - Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza) - Canonicalize addresses where needed for Xe2 and add to devcoredump (José Roberto de Souza) - Only allow 1 ufence per exec / bind IOCTL (Matthew Brost) - Move all display code to display/ (Jani Nikula) - Fix sparse warnings by correctly using annotations (Thomas Hellström) - Warn on job timeouts instead of using asserts (Matt Roper) - Prefix macros to avoid clashes with sparc (Matthew Brost) - Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström) - Add status check during gsc header readout (Suraj Kandpal) - Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost) - Fix fence refcounting (Matthew Brost) - Fix picking incorrect userptr VMA (Matthew Brost) - Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost) - Fix double initialization of display power domains (Xiaoming Wang) - Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison) - Bump minimum GuC version to 70.19.2 for all platforms under force-probe (John Harrison) - Add GuC firmware loading for Lunar Lake (John Harrison) - Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das) - Fix max page size of VMA during a REMAP (Matthew Brost) - Don't ignore error when pinning pages in kthread (Matthew Auld) - Refactor xe hwmon (Karthik Poosa) - Add debug logs for D3cold (Riana Tauro) - Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost) - Always allow to override firmware blob with module param and improve log when no firmware is found (Lucas De Marchi) - Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström) - Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström) - Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman) - Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld) - Prefer drm_dbg() over dev_dbg() (Jani Nikula) - Avoid function cast warnings with clang-16 (Arnd Bergmann) - Enhance xe_bo_move trace (Priyanka Dandamudi) - Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost) - Add XE_VMA_PTE_64K VMA flag (Matthew Brost) - Return 2MB page size for compact 64k PTEs (Matthew Brost) - Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET) - Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit) - Drop extra newline in from sysfs files (Ashutosh Dixit) - Implement VM snapshot support for BO's and userptr (Maarten Lankhorst) - Add debug logs when skipping rebinds (Matthew Brost) - Fix code generation when mixing build directories (Dafna Hirschfeld) - Prefer struct_size over open coded arithmetic (Erick Archer) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dbdkrwmcoqqlwftuc3olbauazc3pbamj26wa34puztowsnauoh@i3zms7ut4yuw |
||
|
Daniel Vetter
|
71ab34f72f |
drm-misc-next for v6.9:
UAPI Changes: - changes to fdinfo stats Cross-subsystem Changes: agp: - remove unused type field from struct agp_bridge_data Core Changes: ci: - update test names - cleanups gem: - add stats for shared buffers plus updates to amdgpu, i915, xe Documentation: - fixes syncobj: - fixes to waiting and sleeping Driver Changes: bridge: - adv7511: fix crash on irq during probe - dw_hdmi: set bridge type host1x: - cleanups ivpu: - updates to firmware API - refactor BO allocation meson: - fix error handling in probe panel: - revert "drm/panel-edp: Add auo_b116xa3_mode" - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs renesas: - add RZ/G2L DU support plus DT bindings -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmXXUhsACgkQaA3BHVML eiNVFQf+IoOXCACGkWEVmVaen50pjEfLq0OjSGHdbTJqhc9wU7Q/kPC+jEpZLyqo OUMdXlA55BeLX52O+bvLordDPNETUsYH1QX2BYKDwcNIrvj8ISXcvdbnDcbVmttD ZUaaBgZ0g2M6sZQvTVU88/1RtaG64+zuk9VA1dPlh6WnBtXBUeXNtD6YQjH6xY+a MjZpB5VafwJTmQxy7qJ4yTLX291Ao8J2YZK8cCSyEr3FQKkAx9sJyp3hPurVIjLM f1y1rtoHhxUV/OVg4M559fp6F6tUkFauv4qu5VUvmPPihJTaU0eSQxir0za4VJ4e Jr2GOkju0oRRpKfjd0aKvaoWhl+MNg== =aaTQ -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-2024-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.9: UAPI Changes: - changes to fdinfo stats Cross-subsystem Changes: agp: - remove unused type field from struct agp_bridge_data Core Changes: ci: - update test names - cleanups gem: - add stats for shared buffers plus updates to amdgpu, i915, xe Documentation: - fixes syncobj: - fixes to waiting and sleeping Driver Changes: bridge: - adv7511: fix crash on irq during probe - dw_hdmi: set bridge type host1x: - cleanups ivpu: - updates to firmware API - refactor BO allocation meson: - fix error handling in probe panel: - revert "drm/panel-edp: Add auo_b116xa3_mode" - add Himax HX83112A plus DT bindings - ltk500hd1829: add support for ltk101b4029w and admatec 9904370 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs renesas: - add RZ/G2L DU support plus DT bindings Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain |
||
Erick Archer
|
a7a3d73686 |
drm/xe: Prefer struct_size over open coded arithmetic
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1].
As the "q" variable is a pointer to "struct xe_exec_queue" and this
structure ends in a flexible array:
struct xe_exec_queue {
[...]
struct xe_lrc lrc[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
kzalloc() function.
This way, the code is more readable and more safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240210141913.6611-1-erick.archer@gmx.com
|
||
|
Lucas De Marchi
|
7a975748d4 |
drm/xe: Use pointers in trace events
Commit |
||
|
Dafna Hirschfeld
|
a24d909977 |
drm/xe: Do not include current dir for generated/xe_wa_oob.h
The generated file 'generated/xe_wa_oob.h' is included using: "generated/xe_wa_oob.h" which first look inside the source code. But the file resides in the build directory and should therefore be included using: <generated/xe_wa_oob.h> Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221083622.1584492-1-dhirschfeld@habana.ai |
||
|
Matthew Brost
|
de74079f00 |
drm/xe: Add debug prints for skipping rebinds
Will help debug issues with VM binds. Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221032743.3698849-1-matthew.brost@intel.com |
||
|
Maarten Lankhorst
|
0eb2a18a8f |
drm/xe: Implement VM snapshot support for BO's and userptr
Since we cannot immediately capture the BO's and userptr, perform it in 2 stages. The immediate stage takes a reference to each BO and userptr, while a delayed worker captures the contents and then frees the reference. This is required because in signaling context, no locks can be taken, no memory can be allocated, and no waits on userspace can be performed. With the delayed worker, all of this can be performed very easily, without having to resort to hacks. Changes since v1: - Fix crash on NULL captured vm. - Use ascii85_encode to capture BO contents and save some space. - Add length to coredump output for each captured area. Changes since v2: - Dump each mapping on their own line, to simplify tooling. - Fix null pointer deref in xe_vm_snapshot_free. Changes since v3: - Don't add uninitialized value to snap->ofs. (Souza) - Use kernel types for u32 and u64. - Move snap_mutex destruction to final vm destruction. (Souza) Changes since v4: - Remove extra memset. (Souza) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-6-maarten.lankhorst@linux.intel.com |
||
|
Maarten Lankhorst
|
0cd99046ca |
drm/xe: Add vm snapshot mutex for easily taking a vm snapshot during devcoredump
The devcoredump is done in fence signaling context. Because of this, we cannot take any of the normal mutexes or we would invert. Normal: Take vm->lock, dma_fence_wait() Devcoredump: from dma_fence_wait() context, take vm->lock. This doesn't work, and we only care about integrity, so take the locks around additions and removals of vma's. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-5-maarten.lankhorst@linux.intel.com |
||
|
Maarten Lankhorst
|
ffb7249df1 |
drm/xe: Annotate each dumpable vma as such
In preparation for snapshot dumping, mark each dumpable VMA as such, so we can walk over the VM later and dump it. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-4-maarten.lankhorst@linux.intel.com |
||
|
Maarten Lankhorst
|
76a86b58d2 |
drm/xe: Add uapi for dumpable bos
Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that this mapping should be dumped. This is not hooked up, but the uapi should be ready before merging. It's likely easier to dump the contents of the bo's at devcoredump readout time, so it's better if the bos will stay unmodified after a hang. The NEEDS_CPU_MAPPING flag is removed as requirement. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-3-maarten.lankhorst@linux.intel.com |
||
|
Maarten Lankhorst
|
bd71cdd209 |
drm/xe: Clear all snapshot members after deleting coredump
It's not strictly needed to clear right now, but this prevents bugs from dangling pointers. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-2-maarten.lankhorst@linux.intel.com |
||
|
Maarten Lankhorst
|
8491b0ef32 |
drm/xe/snapshot: Remove drm_err on guc alloc failures
The kernel will complain loudly if allocation fails, no need to do it ourselves. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Francois Dugast <francois.dugast@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221133024.898315-1-maarten.lankhorst@linux.intel.com |
||
Ashutosh Dixit
|
6650d23f3e |
drm/xe: Fix modpost warning on xe_mocs kunit module
$ make W=1 -j100 M=drivers/gpu/drm/xe MODPOST drivers/gpu/drm/xe/Module.symvers WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_mocs_test.o Fix is identical to ' |
||
|
Ashutosh Dixit
|
e2941a482a |
drm/xe/xe_gt_idle: Drop redundant newline in name
Newline in name is redunant and produces an unnecessary empty line during 'cat name'. Newline is added during sysfs_emit. See ' |
||
|
Matthew Brost
|
5b672ec3f5 |
drm/xe: Return 2MB page size for compact 64k PTEs
Compact 64k PTEs are only intended to be used within a single VMA which covers the entire 2MB range of the compact 64k PTEs. Add XE_VMA_PTE_COMPACT VMA flag to indicate compact 64k PTEs are used and update xe_vma_max_pte_size to return at least 2MB if set. v2: Include missing changes Fixes: |
||
|
Matthew Brost
|
4cf8ffeb66 |
drm/xe: Add XE_VMA_PTE_64K VMA flag
Add XE_VMA_PTE_64K VMA flag to ensure skipping rebinds does not cross 64k page boundaries. Fixes: |
||
|
Matthew Brost
|
ecfac05f96 |
drm/xe: Fix xe_vma_set_pte_size
xe_vma_set_pte_size had a return value and did not set the 4k VMA flag. Both of these were incorrect. Fix these. Fixes: |
||
Thomas Hellström
|
77aebae1ea |
drm/xe/uapi: Remove support for persistent exec_queues
Persistent exec_queues delays explicit destruction of exec_queues until they are done executing, but destruction on process exit is still immediate. It turns out no UMD is relying on this functionality, so remove it. If there turns out to be a use-case in the future, let's re-add. Persistent exec_queues were never used for LR VMs v2: - Don't add an "UNUSED" define for the missing property (Lucas, Rodrigo) v3: - Remove the remaining struct xe_exec_queue::persistent state (Niranjana, Lucas) Fixes: |
||
|
Ashutosh Dixit
|
bb619d7122 |
drm/xe: Fix modpost warning on xe_mocs kunit module
$ make W=1 -j100 M=drivers/gpu/drm/xe MODPOST drivers/gpu/drm/xe/Module.symvers WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_mocs_test.o Fix is identical to ' |
||
|
Ashutosh Dixit
|
e5626eb800 |
drm/xe/xe_gt_idle: Drop redundant newline in name
Newline in name is redunant and produces an unnecessary empty line during 'cat name'. Newline is added during sysfs_emit. See ' |
||
Christophe JAILLET
|
69a5f1774a |
drm/xe/guc: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_max() is inclusive. So a -1 has been added when needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d6a9ec9dc426fca372eaa1423a83632bd743c5d9.1705244938.git.christophe.jaillet@wanadoo.fr |
||
Michał Winiarski
|
bf8ec3c3e8 |
drm/xe: Initialize GuC earlier during probe
SR-IOV VF has limited access to MMIO registers. Fortunately, it is able to access a curated subset that is needed to initialize the driver by communicating with SR-IOV PF using GuC CT. Initialize GuC earlier in order to keep the unified probe ordering between VF and PF modes. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240219130530.1406044-4-michal.winiarski@intel.com |