Add a small wrapper around blk_add_trace_msg that hides some argument
dereferences and the check for a DM-mapped MD device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-3-hch@lst.de
Add a helper to trace bio remapping that hides some argument
dereferences and the check for a DM-mapped MD device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-2-hch@lst.de
iommu-dma does not explicitly reference min_align_mask since we already
assume that will be less than or equal to any typical IOVA granule.
We wouldn't realistically expect to see the case where it is larger, and
that would be non-trivial to support, however for the sake of reasoning
(particularly around the interaction with SWIOTLB), let's clearly
enforce the assumption.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/dbb4d2d8e5d1691ac9a6c67e9758904e6c447ba5.1709553942.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
domain_context_clear_one() only handles the context entry teardown in
legacy mode. Remove the scalable mode check in it to avoid dead code.
Remove an unnecessary check in the code as well.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The scalable mode context entry is now setup in the probe_device path,
eliminating the need to configure it in the attach_dev path. Removes the
redundant code from the attach_dev path to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In contrast to legacy mode, the DMA translation table is configured in
the PASID table entry instead of the context entry for scalable mode.
For this reason, it is more appropriate to set up the scalable mode
context entry in the device_probe callback and direct it to the
appropriate PASID table.
The iommu domain attach/detach operations only affect the PASID table
entry. Therefore, there is no need to modify the context entry when
configuring the translation type and page table.
The only exception is the kdump case, where context entry setup is
postponed until the device driver invokes the first DMA interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the kdump kernel, the IOMMU operates in deferred_attach mode. In this
mode, info->domain may not yet be assigned by the time the release_device
function is called. It leads to the following crash in the crash kernel:
BUG: kernel NULL pointer dereference, address: 000000000000003c
...
RIP: 0010:do_raw_spin_lock+0xa/0xa0
...
_raw_spin_lock_irqsave+0x1b/0x30
intel_iommu_release_device+0x96/0x170
iommu_deinit_device+0x39/0xf0
__iommu_group_remove_device+0xa0/0xd0
iommu_bus_notifier+0x55/0xb0
notifier_call_chain+0x5a/0xd0
blocking_notifier_call_chain+0x41/0x60
bus_notify+0x34/0x50
device_del+0x269/0x3d0
pci_remove_bus_device+0x77/0x100
p2sb_bar+0xae/0x1d0
...
i801_probe+0x423/0x740
Use the release_domain mechanism to fix it. The scalable mode context
entry which is not part of release domain should be cleared in
release_device().
Fixes: 586081d3f6 ("iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO")
Reported-by: Eric Badger <ebadger@purestorage.com>
Closes: https://lore.kernel.org/r/20240113181713.1817855-1-ebadger@purestorage.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current device_release callback for individual iommu drivers does the
following:
1) Silent IOMMU DMA translation: It detaches any existing domain from the
device and puts it into a blocking state (some drivers might use the
identity state).
2) Resource release: It releases resources allocated during the
device_probe callback and restores the device to its pre-probe state.
Step 1 is challenging for individual iommu drivers because each must check
if a domain is already attached to the device. Additionally, if a deferred
attach never occurred, the device_release should avoid modifying hardware
configuration regardless of the reason for its call.
To simplify this process, introduce a static release_domain within the
iommu_ops structure. It can be either a blocking or identity domain
depending on the iommu hardware. The iommu core will decide whether to
attach this domain before the device_release callback, eliminating the
need for repetitive code in various drivers.
Consequently, the device_release callback can focus solely on the opposite
operations of device_probe, including releasing all resources allocated
during that callback.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240305013305.204605-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Because surprise removal could happen anytime, e.g. user could request safe
removal to EP(endpoint device) via sysfs and brings its link down to do
surprise removal cocurrently. such aggressive cases would cause ATS
invalidation request issued to non-existence target device, then deadly
loop to retry that request after ITE fault triggered in interrupt context.
this patch aims to optimize the ITE handling by checking the target device
presence state to avoid retrying the timeout request blindly, thus avoid
hard lockup or system hang.
Devices TLB should only be invalidated when devices are in the
iommu->device_rbtree (probed, not released) and present.
Fixes: 6ba6c3a4ca ("VT-d: add device IOTLB invalidation support")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-4-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make pci_dev_is_disconnected() public so that it can be called from
Intel VT-d driver to quickly fix/workaround the surprise removal
unplug hang issue for those ATS capable devices on PCIe switch downstream
hotplug capable ports.
Beside pci_device_is_present() function, this one has no config space
space access, so is light enough to optimize the normal pure surprise
removal and safe removal flow.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Haorong Ye <yehaorong@bytedance.com>
Signed-off-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Link: https://lore.kernel.org/r/20240301080727.3529832-2-haifeng.zhao@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
cpupower-frequency-info.1 man page type is incorrect for
related-cpus. Fix it.
utils/cpufreq-info.c
{"related-cpus", no_argument, NULL, 'r'},
{"affected-cpus", no_argument, NULL, 'a'},
Fixed changelog before applying:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jan Kratochvil <jan@jankratochvil.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZehsXQAKCRCRxhvAZXjc
ogG1AP9GD22EqFJtm62s7m+/Whls4hK2Js0WOY/eb7H4N97cvQD/aZ/fYOU2sDUw
gY3ejUoOVFqwh8jp1kp4EYSKFlcLOgQ=
=nYZR
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8-release.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Get rid of copy_mc flag in iov_iter which really only makes sense for
the core dumping code so move it out of the generic iov iter code and
make it coredump's problem. See the detailed commit description.
- Revert fs/aio: Make io_cancel() generate completions again
The initial fix here was predicated on the assumption that calling
ki_cancel() didn't complete aio requests. However, that turned out to
be wrong since the two drivers that actually make use of this set a
cancellation function that performs the cancellation correctly. So
revert this change.
- Ensure that the test for IOCB_AIO_RW always happens before the read
from ki_ctx.
* tag 'vfs-6.8-release.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: get rid of 'copy_mc' flag
fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion
Revert "fs/aio: Make io_cancel() generate completions again"
These should be the final fixes for the soc tree for 6.8, as usual
they mostly deal wtih dts files:
- Qualcomm fixes for pcie4 on sc8280xp, a revert of msm8996 mpm support,
sm6115 interconnect and sm8650 gpio.
- Two fixes for Tegra234 ethernet
- A Makefile fix to actually build the allwinner based orange pi zero 2w
device tree
- Fixes for clocks and reset on imx8mp and a DSI display regression
on imx7.
The non-DT fixes are:
- Firmware fixes addressing a kernel panic in op-tee and a minor regression
in microchip/riscv.
- A defconfig change to bring back backlight support after a Kconfig change
-----BEGIN PGP SIGNATURE-----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=vi42
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These should be the final fixes for the soc tree for 6.8, as usual
they mostly deal wtih dts files:
- Qualcomm fixes for pcie4 on sc8280xp, a revert of msm8996 mpm
support, sm6115 interconnect and sm8650 gpio.
- Two fixes for Tegra234 ethernet
- A Makefile fix to actually build the allwinner based orange pi zero
2w device tree
- Fixes for clocks and reset on imx8mp and a DSI display regression
on imx7.
The non-DT fixes are:
- Firmware fixes addressing a kernel panic in op-tee and a minor
regression in microchip/riscv.
- A defconfig change to bring back backlight support after a Kconfig
change"
* tag 'arm-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: Fix over-requested allocation size
tee: optee: Fix kernel panic caused by incorrect error handling
Revert "arm64: dts: qcom: msm8996: Hook up MPM"
arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed
arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
arm64: tegra: Fix Tegra234 MGBE power-domains
arm64: tegra: Set the correct PHY mode for MGBE
arm64: dts: qcom: sm6115: Fix missing interconnect-names
arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
-----BEGIN PGP SIGNATURE-----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=m0XK
-----END PGP SIGNATURE-----
Merge tag 'v6.8-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix potential use-after-frees in rk3288 and sun8i-ce"
* tag 'v6.8-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rk3288 - Fix use after free in unprepare
crypto: sun8i-ce - Fix use after free in unprepare
bcache currently calculates the stripe size for the non-cached_dev
case directly in bcache_device_init, but for the cached_dev case it does
it in the caller. Consolidate it in one places, which also enables
setting the io_opt queue_limit before allocating the gendisk so that it
can be passed in instead of changing the limit just after the allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240226104826.283067-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In virtblk_read_zoned_limits(), setting a zoned block device maximum
number of open and active zones using the functions
disk_set_max_open_zones() and disk_set_max_active_zones() is incorrect
as setting the limits for the request queue is now done atomically when
the gendisk is created (with blk_mq_alloc_disk()). The value set by the
disk_set_max_open/active_zones() functions will be overwritten.
Fix this by setting the maximum number of open and active zones directly
in the queue_limits structure passed to virtblk_read_zoned_limits().
Fixes: 8b83725656 ("virtio_blk: pass queue_limits to blk_mq_alloc_disk")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240301192639.410183-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch is against CVE-2023-6270. The description of cve is:
A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
`struct net_device`, and a use-after-free can be triggered by racing
between the free on the struct and the access through the `skbtxq`
global queue. This could lead to a denial of service condition or
potential code execution.
In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.
This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: 7562f876cd ("[NET]: Rework dev_base via list_head (v3)")
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/r/20240305082048.25526-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, all Kconfig symbols for R-Car Gen4 SoCs select
ARCH_RCAR_GEN3, which might confuse the casual reader. Prepare for the
advent of ARCH_RCAR_GEN4 by extending the dependency for auto-selecting
reset controller support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
This adds i2c bus recovery to the lpi2c driver.
Uses the generic recovery function setting the SCL/SDA pads as
GPIO pins and sending 9 clocks to try and recover the bus.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Commit 6d4e80db4e ("block: add capacity validation in
bdev_add_partition()") add check of partition's start and end sectors to
prevent exceeding the size of the disk when adding partitions. However,
there is still no check for resizing partitions now.
Move the check to blkpg_do_ioctl() to cover resizing partitions.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305032132.548958-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The expression dst->nr_samples + src->nr_samples may
have zero value on overflow. It is necessary to add
a check to avoid division by zero.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240305134509.23108-1-r.smirnov@omp.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch drbd_reconsider_queue_parameters to set up the queue parameters
in an on-stack queue_limits structure and apply the atomically. Remove
various helpers that have become so trivial that they can be folded into
drbd_reconsider_queue_parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check if discard is supported for a given connection /
backing device combination.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-7-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fixup_write_zeroes always overrides the max_write_zeroes_sectors value
a little further down the callchain, so don't bother to setup a limit
in decide_on_discard_support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-6-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drbd_setup_queue_param is only called by drbd_reconsider_queue_parameters
and there is no really clear boundary of responsibilities between the
two.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-5-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a drbd_backing_dev_max_segments helper that checks the
backing device limitation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Tested-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20240306140332.623759-4-philipp.reisner@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out a drbd_max_peer_bio_size helper for the peer I/O size,
and condense the various checks to a nested min3(..., max())) instead
of using a lot of local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a queue_limits structure with the max_hw_sectors limit to
blk_alloc_disk instead of updating the limit on the allocated gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305134041.137006-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the block_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240305-class_cleanup-block-v1-1-130bb27b9c72@marliere.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull MD fixes from Song:
"This set fixes two issues:
1. dmraid regression since 6.7 kernels. This issue was initially
reported in [1]. This set of fix has been reviewed and tested by
md and dm folks.
2. raid5 hang since 6.7 kernel, reported in [2]. We haven't got a
better fix for this issue yet. This revert is a workaround. It has
been applied to 6.7 stable kernels [3], and proved to be affective.
We will look more into this issue for a better fix.
[1] https://lore.kernel.org/linux-raid/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/
[2] https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
[3] 87165c64fe in linux-6.7.y branch."
* tag 'md-6.9-20240305' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
dm-raid: fix lockdep waring in "pers->hot_add_disk"
dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape
dm-raid: add a new helper prepare_suspend() in md_personality
md/dm-raid: don't call md_reap_sync_thread() directly
dm-raid: really frozen sync_thread during suspend
md: add a new helper reshape_interrupted()
md: export helper md_is_rdwr()
md: export helpers to stop sync_thread
md: don't clear MD_RECOVERY_FROZEN for new dm-raid until resume
Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d""
Support accessing $argN in the return probe events. This will help users to
record entry data in function return (exit) event for simplfing the function
entry/exit information in one event, and record the result values (e.g.
allocated object/initialized object) at function exit.
For example, if we have a function `int init_foo(struct foo *obj, int param)`
sometimes we want to check how `obj` is initialized. In such case, we can
define a new return event like below;
# echo 'r init_foo retval=$retval param=$arg2 field1=+0($arg1)' >> kprobe_events
Thus it records the function parameter `param` and its result `obj->field1`
(the dereference will be done in the function exit timing) value at once.
This also support fprobe, BTF args and'$arg*'. So if CONFIG_DEBUG_INFO_BTF
is enabled, we can trace both function parameters and the return value
by following command.
# echo 'f target_function%return $arg* $retval' >> dynamic_events
Link: https://lore.kernel.org/all/170952365552.229804.224112990211602895.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Instead of incrementing the trace_probe::nr_args, init it at
trace_probe_init(). Without this change, there is no way to get the number
of trace_probe arguments while parsing it.
This is a cleanup, so the behavior is not changed.
Link: https://lore.kernel.org/all/170952363585.229804.13060759900346411951.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cleanup traceprobe_parse_probe_arg_body() to split out the
type parser and post-processing part of fetch_insn.
This makes no functional change.
Link: https://lore.kernel.org/all/170952362603.229804.9942703761682605372.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pass the constant limits directly to blk_mq_alloc_disk, set the nonrot
flag there as well, and then use the commit API to change the transfer
size and logical block size dependent values.
This relies on the assumption that no I/O can be pending before the
devices moves into the ready state and doesn't need extra freezing
for changes to the queue limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Most of the code in setup_blk_queue is shared between all disciplines.
Move it to common code and leave a method to query the maximum number
of transferable blocks, and a flag to indicate discard support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reflow dasd_state_basic_to_ready a bit to make it easier to modify.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20240228133742.806274-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the instruction decoder, we are now able to decode and recognize
instructions with opcode extensions. There are more instructions in
these groups that can be boosted:
Group 2: ROL, ROR, RCL, RCR, SHL/SAL, SHR, SAR
Group 3: TEST, NOT, NEG, MUL, IMUL, DIV, IDIV
Group 4: INC, DEC (byte operation)
Group 5: INC, DEC (word/doubleword/quadword operation)
These instructions are not boosted previously because there are reserved
opcodes within the groups, e.g., group 2 with ModR/M.nnn == 110 is
unmapped. As a result, kprobes attached to them requires two int3 traps
as being non-boostable also prevents jump-optimization.
Some simple tests on QEMU show that after boosting and jump-optimization
a single kprobe on these instructions with an empty pre-handler runs 10x
faster (~1000 cycles vs. ~100 cycles).
Since these instructions are mostly ALU operations and do not touch
special registers like RIP, let's boost them so that we get the
performance benefit.
Link: https://lore.kernel.org/all/20240204031300.830475-4-jinghao7@illinois.edu/
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Both INT (INT n, INT1, INT3, INTO) and UD (UD0, UD1, UD2) serve special
purposes in the kernel, e.g., INT3 is used by KGDB and UD2 is involved
in LLVM-KCFI instrumentation. At the same time, attaching kprobes on
these instructions (particularly UD) will pollute the stack trace dumped
in the kernel ring buffer, since the exception is triggered in the copy
buffer rather than the original location.
Check for INT and UD in can_probe and reject any kprobes trying to
attach to these instructions.
Link: https://lore.kernel.org/all/20240204031300.830475-3-jinghao7@illinois.edu/
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Both can_probe and can_boost have int return type but are using int as
boolean in their context.
Refactor both functions to make them actually return boolean.
Link: https://lore.kernel.org/all/20240204031300.830475-2-jinghao7@illinois.edu/
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The KVM RISC-V allows Zacas extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
