Respect the @dev argument in devm_iio_dmaengine_buffer_setup() and bind the
IIO DMA buffer lifetime to that device.
For the only user of this function, the IIO parent device is the
struct device being passed to the API so no real fix in here (just
consistency with other IIO APIs).
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240109-dmaengine_use_device-v1-1-1cbdb7fe9f29@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This replaces use of individual buffer mode flags with
INDIO_ALL_BUFFER_MODES in the iio_buffer_enabled() function.
This simplifies the code and makes it robust in case of the addition of
new buffer modes.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240108200647.3916681-1-dlechner@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
File entry has driver/iio/adc two times. Fix the file entry
Found by ./scripts/get_maintainer.pl --self-test=patterns
Signed-off-by: Amit Dhingra <mechanicalamit@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/CAO=gReEUr4B+E2mQsSrncHf41f0A915SuoWgA522_2Ts-dZbSg@mail.gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace seekdir() with rewinddir() in order to fix a localized glibc bug.
One of the glibc patches that stable Gentoo is using causes an improper
directory stream positioning bug on 32bit arm. That in turn ends up as a
floating point exception in iio_generic_buffer.
The attached patch provides a fix by using an equivalent function which
should not cause trouble for other distros and is easier to reason about
in general as it obviously always goes back to to the start.
https://sourceware.org/bugzilla/show_bug.cgi?id=31212
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20240108103224.3986-1-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The variable period is being initialized with a value that is never
read, it is being re-assigned a new value later on before it is read.
The initialization is redundant and can be removed.
Cleans up clang scan build warning:
Value stored to 'period' during its initialization is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240106153202.54861-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-25-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong. Also drop now unneeded linux/acpi.h include and
added linux/mod_devicetable.h for struct acpi_device_id definition.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-24-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong. Also drop now unneeded linux/acpi.h include and
added linux/mod_devicetable.h for struct acpi_device_id definition.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-23-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong. Also drop now unneeded linux/acpi.h include.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-22-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include from acpi.h to mod_devicetable.h which includes the
definition of struct acpi_device_id.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-21-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include from acpi.h to mod_devicetable.h which includes the
definition of struct acpi_device_id.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-20-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include from acpi.h to mod_devicetable.h which includes the
definition of struct acpi_device_id.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311190738.gldzuIXo-lkp@intel.com/
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-18-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include from acpi.h to mod_devicetable.h which includes the
definition of struct acpi_device_id.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-17-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include from acpi.h to mod_devicetable.h which includes the
definition of struct acpi_device_id.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-16-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Include linux/mod_devicetable.h which includes the definition of
struct acpi_device_id (hence somewhat related to the main change)
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-15-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include from acpi.h to mod_devicetable.h which includes the
definition of struct acpi_device_id.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-11-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-10-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In general the complexity of avoiding maybe unused variable warnings is
not worth dealing with for the small amount of data saved. In thie
case, the i2c driver does include some other code under a CONFIG_ACPI
guard but remove the ACPI_PTR() usage anyway to bring keep it inline
with the spi driver.
Drop include of linux/acpi.h in the spi driver that doesn't need
it as struct acpi_device_id is defined in mod_devicetable.h which
is already included.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-8-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Switch include to mod_devicetable.h as that contains the only
ACPI specific definitions needed in this driver.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311181952.1usxCcup-lkp@intel.com/
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Whilst here tidy up a trivial bit of unusual indentation.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoiding unused variable warnings when using this macro adds
complexity that in simple cases like this one is not justified
for the small saving in data.
Whilst here tidy up a trivial bit of unusual indentation.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This avoids a build warning due to the use of ACPI_PTR().
Given the driver already has APCI specific code under CONFIG_ACPI move
the table rather than removing the ACPI_PTR() call as we already
have the complexity of CONFIG_ACPI.
Dropped a pointless comma after {} terminator whilst moving the code.
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In general using ACPI_PTR() leads to more fragile code for a very
minor saving in storage in the case of !CONFIG_ACPI so in IIO we
prefer not to use it if the only ACPI specific code is the acpi_device_id
table.
In this case will also suppress a unused variable warning.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302142222.vVU0E4eu-lkp@intel.com/
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add honeywell,pressure-triplet property that automatically initializes
pmin-pascal, pmax-pascal so that the user is not required to look-up
the chip in the datasheet and convert various units to pascals himself.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-10-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor driver by splitting the code into core and i2c.
Seemingly redundant read/write function parameters are required for
compatibility with the SPI driver.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-9-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix indentation and whitespace in code that will not get refactored.
Make URL inside comment copy-paste friendly.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-8-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This driver supports 32*3 combinations of fixed ranges and transfer
functions, plus custom ranges.
So statistically a user has more than 99% chance that the provided
default configuration will generate invalid pressure readings if the
bindings are not initialized and the driver is instantiated via sysfs.
The current patch removes this loophole making sure the driver loads
only if the firmware properties are present.
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-7-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Improve driver error resilience by ignoring the measurement if any of
the 3 error flags gets set while interacting with the sensor.
Based on the datasheet, in table 14 on page 14, the status byte
contains:
bit 5 busy flag - 1 if device is busy
bit 2 memory integrity/error flag - 1 if integrity test failed
bit 0 math saturation - 1 if internal math saturation has occurred
Co-developed-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-6-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 1db9d06aaa55 ("mm/slab: remove CONFIG_SLAB from all Kconfig and
Makefile") removes the config SLAB and makes the SLUB allocator the only
default allocator in the kernel. Hence, the advice on reducing OS jitter
due to kworker kernel threads to build with CONFIG_SLUB instead of
CONFIG_SLAB is obsolete.
Remove the obsolete advice to build with SLUB instead of SLAB.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231130095515.21586-1-lukas.bulwahn@gmail.com
This comment about DRM drivers has been there since the first git
commit. It simply doesn't belong in kernel-parameters; remove it.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240111085220.3693059-1-vegard.nossum@oracle.com
There are considerations to drop platform_driver_probe() as a concept
that isn't relevant any more today. It comes with an added complexity
that makes many users hold it wrong. (E.g. this driver should have
better used __init instead of __init_or_module to mark functions only
relevant to .probe() and mark the driver struct with __refdata.)
This fixes a W=1 build warning:
WARNING: modpost: drivers/memory/emif: section mismatch in reference: emif_driver+0x4 (section: .data) -> emif_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240123170846.1362597-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
When on the documentation home page, there won't be any ".current"
element since no entry from the TOC was selected yet. That results in a
javascript error. Fix that by only trying to set the scrollTop if we
have matches for current entries.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240123162157.61819-2-gustavo.sousa@intel.com
Add a compatible for MMS252 touchscreen which appears to work fine with
the MMS114 driver.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bryant Mairs <bryant@mai.rs>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231105204759.37107-2-bryant@mai.rs
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Move the function description comment to immediately above the
function implementation, the add function parameter descriptions to
prevent kernel-doc warnings:
clk-usb.c:80: warning: expecting prototype for sunxi_usb_clk_setup(). Prototype was for SUNXI_USB_MAX_SIZE() instead
clk-usb.c:91: warning: Function parameter or struct member 'node' not described in 'sunxi_usb_clk_setup'
clk-usb.c:91: warning: Function parameter or struct member 'data' not described in 'sunxi_usb_clk_setup'
clk-usb.c:91: warning: Function parameter or struct member 'lock' not described in 'sunxi_usb_clk_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051858.17647-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Move the function description kernel-doc comment to immediately above
the function implementation, correct the function name in the comment,
then add a function parameter description to prevent these kernel-doc
warnings:
drivers/clk/sunxi/clk-sun9i-cpus.c:25: warning: expecting prototype for sun9i_a80_cpus_clk_setup(). Prototype was for SUN9I_CPUS_MAX_PARENTS() instead
clk-sun9i-cpus.c:184: warning: Function parameter or struct member 'node' not described in 'sun9i_a80_cpus_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051845.17603-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Move the function kernel-doc comment to be immediately before the
function implementation, then add a function parameter description
to prevent kernel-doc warnings:
clk-a20-gmac.c:43: warning: expecting prototype for sun7i_a20_gmac_clk_setup(). Prototype was for SUN7I_A20_GMAC_GPIT() instead
clk-a20-gmac.c:53: warning: Function parameter or struct member 'node' not described in 'sun7i_a20_gmac_clk_setup'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Emilio López <emilio@elopez.com.ar>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <linux-clk@vger.kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-sunxi@lists.linux.dev>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240121051837.17564-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
After the DT conversion of SH-Mobile and Armadillo-800-EVA display
support, all devices are registered from DT, so we can remove the
registration of clkdevs.
Add the missing #include <linux/slab.h>, which was included implicitly
through <linux/clkdev.h> before.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e98a6e47ebecc44fa41de6d88b4ed20c6efbd177.1705931322.git.geert+renesas@glider.be
Some boards might use Linux and another OS at the same time. In such
case, currently, during booting, Linux will stop necessary module clocks
which are not used on the Linux side, but are used by another OS.
To avoid such situation, renesas-cpg-mssr tries to find
status = "reserved" devices (A), and adds CLK_IGNORE_UNUSED flag to its
<&cgp CPG_MOD xxx> clock (B).
Table 2.4: Values for status property
https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf
"reserved"
Indicates that the device is operational, but should not be
used. Typically this is used for devices that are controlled
by another software component, such as platform firmware.
ex)
scif5: serial@e6f30000 {
...
(B) clocks = <&cpg CPG_MOD 202>,
<&cpg CPG_CORE R8A7795_CLK_S3D1>,
<&scif_clk>;
...
(A) status = "reserved";
};
Cc: Aymeric Aillet <aymeric.aillet@iot.bzh>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/878r4ygfap.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>