This commit adds net_offload to IPv6 Hop-by-Hop extension headers (as it
is done for routing and dstopts) since it is supported in GSO and GRO.
This allows to remove specific HBH conditionals in GSO and GRO when
pulling and parsing an incoming packet.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d4f8825a-1d55-4b12-9d67-a254dbbfa6ae@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the optional PRE_COPY support was added to speed up the device
compatibility check, it failed to update the saving/resuming data
pointers based on the fd offset. This results in migration data
corruption and when the device gets started on the destination the
following error is reported in some cases,
[ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received:
[ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010
[ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f
[ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000
[ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found
[ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found
[ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2
Fixes: d9a871e4a1 ("hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions")
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231120091406.780-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add description to net/packet/af_packet.c
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104144119.1319055-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all the DSA tag modules.
The descriptions are copy/pasted Kconfig names, with s/^Tag/DSA tag/.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240104143759.1318137-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The checking of @c->nroot->flags and @c->dirty_[n|p]n_cnt in function
nothing_to_commit() is not atomic, which could be raced with modifying
of lpt, for example:
P1 P2 P3
run_gc
ubifs_garbage_collect
do_commit
ubifs_return_leb
ubifs_lpt_lookup_dirty
dirty_cow_nnode
do_commit
nothing_to_commit
if (test_bit(DIRTY_CNODE, &c->nroot->flags)
// false
test_and_set_bit(DIRTY_CNODE, &nnode->flags)
c->dirty_nn_cnt += 1
ubifs_assert(c, c->dirty_nn_cnt == 0)
// false !
Fetch a reproducer in Link:
UBIFS error (ubi0:0 pid 2747): ubifs_assert_failed
UBIFS assert failed: c->dirty_pn_cnt == 0, in fs/ubifs/commit.c
Call Trace:
ubifs_ro_mode+0x58/0x70 [ubifs]
ubifs_assert_failed+0x6a/0x90 [ubifs]
do_commit+0x5b7/0x930 [ubifs]
ubifs_run_commit+0xc6/0x1a0 [ubifs]
ubifs_sync_fs+0xd8/0x110 [ubifs]
sync_filesystem+0xb4/0x120
do_syscall_64+0x6f/0x140
Fix it by checking @c->dirty_[n|p]n_cnt and @c->nroot state with
@c->lp_mutex locked.
Fixes: 944fdef52c ("UBIFS: do not start the commit if there is nothing to commit")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218162
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Jiri Pirko says:
====================
dpll: expose fractional frequency offset value to user
Allow to expose pin fractional frequency offset value over new DPLL
generic netlink attribute. Add an op to get the value from the driver.
Implement this new op in mlx5 driver.
====================
Link: https://lore.kernel.org/r/20240103132838.1501801-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new netlink attribute to expose fractional frequency offset value
for a pin. Add an op to get the value from the driver.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240103132838.1501801-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit in Fixes has changed a devm_clk_get()/clk_prepare_enable() into
a devm_clk_get_enabled().
It has updated the error handling path of the probe accordingly, but the
remove has been left unchanged.
Remove now the redundant clk_disable_unprepare() call from the remove
function.
Fixes: a90a987ebe ("spi: use devm_clk_get_enabled() in mcfqspi_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://msgid.link/r/6670aed303e1f7680e0911387606a8ae069e2cef.1704464447.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
An issue can occur between write-streaming (storing dirty data in partial
non-uptodate pages) and a cachefiles object being culled to make space.
The problem occurs because the cache object is only marked in use while
there are files open using it. Once it has been released, it can be culled
and the cookie marked disabled.
At this point, a streaming write is permitted to occur (if the cache is
active, we require pages to be prefetched and cached), but the cache can
become active again before this gets flushed out - and then two effects can
occur:
(1) The cache may be asked to write out a region that's less than its DIO
block size (assumed by cachefiles to be PAGE_SIZE) - and this causes
one of two debugging statements to be emitted.
(2) netfs_how_to_modify() gets confused because it sees a page that isn't
allowed to be non-uptodate being uptodate and tries to prefetch it -
leading to a warning that PG_fscache is set twice.
Fix this by the following means:
(1) Add a netfs_inode flag to disallow write-streaming to an inode and set
it if we ever do local caching of that inode. It remains set for the
lifetime of that inode - even if the cookie becomes disabled.
(2) If the no-write-streaming flag is set, then make netfs_how_to_modify()
always want to prefetch instead.
(3) If netfs_how_to_modify() decides it wants to prefetch a folio, but
that folio has write-streamed data in it, then it requires the folio
be flushed first.
(4) Export a counter of the number of times we wanted to prefetch a
non-uptodate page, but found it had write-streamed data in it.
(5) Export a counter of the number of times we cancelled a write to the
cache because it didn't DIO align and remove the debug statements.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
With 16a26b20d2 ("ubifs: authentication: Add hashes to index nodes")
insert_node() and insert_dent() got a new function parameter 'hash'. Add
a description for this new parameter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311051618.D7YUE1Rr-lkp@intel.com/
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Use the correct function name in the kernel-doc comment to prevent
a kernel-doc warning:
auth.c:30: warning: expecting prototype for ubifs_node_calc_hash(). Prototype was for __ubifs_node_calc_hash() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202311052125.gE1Rylox-lkp@intel.com
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Simplify ubifs_hmac_wkm() by using crypto_shash_tfm_digest() instead of
an alloc+init+update+final sequence. This should also improve
performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The 64bit helper are marked to clobber the memory, but the 32bit ones
are not. Add the appropriate clobber to the 32bit helper routines so
that the compiler cannot do invalid optimizations.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
These functions were only used when calling PTRACE_ARCH_PRCTL, but this
code has been removed.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
These registers are saved/restored together with the other general
registers using ptrace. In arch_set_tls we then just need to set the
register and it will be synced back normally.
Most of this logic was introduced in commit f355559cf7 ("[PATCH] uml:
x86_64 thread fixes"). However, at least today we can rely on ptrace to
restore the base registers for us. As such, only the part of the patch
that tracks the FS register for use as thread local storage is actually
needed.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
LLVM-based toolchain is using a different set of tools for coverage.
Add an example that produces output in lcov format.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
[rw: Added spelling fixes from David Gow]
Signed-off-by: Richard Weinberger <richard@nod.at>
GuC Relay infrastructure is ready, start handling relay messages
from the GuC to unblock testing on the live system.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-11-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Add few tests to make sure that some negative and normal use
scenarios of the GuC Relay are implemented correctly.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-10-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
There are scenarios where SR-IOV Virtual Function (VF) driver will
need to get additional data that is not available over VF MMIO BAR
nor could be queried from the GuC firmware and must be obtained
from the Physical Function (PF) driver.
To allow such communication between VF and PF drivers, GuC supports
set of H2G and G2H actions which allows relaying embedded messages,
that are otherwise opaque for the GuC.
To allow use of this communication mechanism, provide functions for
sending requests and handling replies and placeholder where we will
put handlers for incoming requests.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-8-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
The communication between Virtual Function (VF) drivers and
Physical Function (PF) drivers is based on the GuC firmware
acting as a proxy (relay) agent.
Add related ABI definitions that we will be using in upcoming
patches with our GuC Relay implementation.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-7-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
In upcoming new GuC ABI definitions we will want to refer to max
number of dwords that could fit into CTB HXG message. Add explicit
definition named as GUC_CTB_MAX_DWORDS and start using it.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-6-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
In addition to MMIO and CTB communication between the host driver
and the GUC firmware, we will start using GuC HXG message protocol
in communication between SR-IOV VFs and PF. Define helpers related
to HXG message protocol to minimize code duplication.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-5-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
To simplify logging and help identify SR-IOV specific messages
related to the GT, define set of helper macros that will add
prefix to the messages based on the current SR-IOV mode.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
According to the PCI Express specification, the SR-IOV Virtual
Functions (VFs) are numbered starting with 1 (VF1, VF2, ...).
Additionally, both driver and GuC will refer to Physical Function
(PF) as VF0. Define helper macro to represent VFn and PF.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-3-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
We plan to use several workers where we might be running long
operations. Allocate dedicated workqueue to avoid undesired
interaction with non-virtualized workers.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-2-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
To enable TDM mode, the current control flow limits the function
calling order should be 'set_tdm_slot->set_dai_fmt'. But not all
platform sound card like as simeple card to follow this design.
To bypass this limit, adjust the DAI format setting in runtime
'hw_param' callback.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://msgid.link/r/c4c8df00d8d179b8b5b39a8521de3a85325c57e8.1703813842.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now intel_wakeref_t is a unsigned long and Xe KMD version of those
functions should use the same type, so changing from bool to
intel_wakeref_t.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
i915 defines it as unsigned long so Xe should do the same to avoid
compilation warnings:
CC [M] drivers/gpu/drm/i915/i915_gem.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_power_well.o
In file included from ./include/drm/drm_mm.h:51,
from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h:15,
from drivers/gpu/drm/i915/display/intel_display_power.c:8:
drivers/gpu/drm/i915/display/intel_display_power.c: In function ‘print_async_put_domains_state’:
drivers/gpu/drm/i915/display/intel_display_power.c:408:29: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
409 | power_domains->async_put_wakeref);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| int
./include/drm/drm_print.h:410:39: note: in definition of macro ‘drm_dev_dbg’
410 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
./include/drm/drm_print.h:510:33: note: in expansion of macro ‘drm_dbg_driver’
510 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:9: note: in expansion of macro ‘drm_dbg’
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:50: note: format string is defined here
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ~~^
| |
| long unsigned int
| %u
CC [M] drivers/gpu/drm/i915/i915_gem_evict.o
CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_trace.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_wa.o
CC [M] drivers/gpu/drm/i915/i915_query.o
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.
The issue dates back to much earlier than
commit b49e894c3f ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3f ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to downloading
corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563 from tas2562 header file to tas2781 header file to unbind
tas2563 from tas2562 driver code and bind it to tas2781 driver code,
because tas2563 only work in bypass-DSP mode with tas2562 driver. In
order to enable DSP mode for tas2563, it has been moved to tas2781
driver. As to the hardware part, such as register setting and DSP
firmware, all these are stored in the binary firmware. What tas2781
drivder does is to parse the firmware and download it to the chip,
then power on the chip. So, tas2781 driver can be resued as tas2563
driver. Only attention will be paid to downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-3-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563 from tas2562.yaml to tas2781.yaml to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240104145721.1398-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
using kvzalloc() simplifies the code by avoiding the
use of different memory allocation functions for different
situations, making the code more uniform and readable.
Signed-off-by: Chen Haonan <chen.haonan2@zte.com.cn>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>