Commit graph

1,264,717 commits

Author SHA1 Message Date
Ahmed Zaki
7c402f77e8 net: ethtool: copy input_xfrm to user-space in ethtool_get_rxfh
The ioctl path of ethtool's get channels is missing the final step of
copying the new input_xfrm field to user-space. This should have been
part of [1].

Link: https://lore.kernel.org/netdev/20231213003321.605376-1-ahmed.zaki@intel.com/ [1]
Fixes: 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231221184235.9192-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 16:00:06 -08:00
Bjorn Helgaas
0ee2030af4 MAINTAINERS: Orphan Cadence PCIe IP
Tom Joseph <tjoseph@cadence.com> is listed as the maintainer of the Cadence
PCIe IP, but email to that address bounces and lore has no correspondence
from Tom in the past two years
(https://lore.kernel.org/all/?q=f%3Atjoseph).

Mark the Cadence IP orphaned and add Tom to CREDITS.

Link: https://lore.kernel.org/r/20240102182157.GA1732664@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-01-02 17:29:38 -06:00
Bjorn Helgaas
f93e71aea6 Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"
This reverts commit 08d0cc5f34.

Michael reported that when attempting to resume from suspend to RAM on ASUS
mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f34
("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay
with no output, followed by a reboot.

Workarounds include:

  - Reverting 08d0cc5f34 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
  - Booting with "pcie_aspm=off"
  - Booting with "pcie_aspm.policy=performance"
  - "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm"
    before suspending
  - Connecting a USB flash drive

Link: https://lore.kernel.org/r/20240102232550.1751655-1-helgaas@kernel.org
Fixes: 08d0cc5f34 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
Reported-by: Michael Schaller <michael@5challer.de>
Link: https://lore.kernel.org/r/76c61361-b8b4-435f-a9f1-32b716763d62@5challer.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
2024-01-02 17:29:15 -06:00
Vladimir Oltean
8dc4c41000 xsk: make struct xsk_cb_desc available outside CONFIG_XDP_SOCKETS
The ice driver fails to build when CONFIG_XDP_SOCKETS is disabled.

drivers/net/ethernet/intel/ice/ice_base.c:533:21: error:
variable has incomplete type 'struct xsk_cb_desc'
        struct xsk_cb_desc desc = {};
                           ^
include/net/xsk_buff_pool.h:15:8: note:
forward declaration of 'struct xsk_cb_desc'
struct xsk_cb_desc;
       ^

Fixes: d68d707dcb ("ice: Support XDP hints in AF_XDP ZC mode")
Closes: https://lore.kernel.org/netdev/8b76dad3-8847-475b-aa17-613c9c978f7a@infradead.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231219110205.1289506-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 15:27:35 -08:00
Alex Henrie
8cdafdd946 Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum required"
The commit had a bug and might not have been the right approach anyway.

Fixes: 629df6701c ("net: ipv6/addrconf: clamp preferred_lft to the minimum required")
Fixes: ec575f885e ("Documentation: networking: explain what happens if temp_prefered_lft is too small or too large")
Reported-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/netdev/20231221231115.12402-1-dan@danm.net/
Link: https://lore.kernel.org/netdev/CAMMLpeTdYhd=7hhPi2Y7pwdPCgnnW5JYh-bu3hSc7im39uxnEA@mail.gmail.com/
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231230043252.10530-1-alexhenrie24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 14:58:46 -08:00
Bjorn Helgaas
db02e176f5 PCI/AER: Use explicit register sizes for struct members
aer_irq() reads the AER Root Error Status and Error Source Identification
(PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC) registers directly into
struct aer_err_source.  Both registers are 32 bits, so declare the members
explicitly as "u32" instead of "unsigned int".

Similarly, aer_get_device_error_info() reads the AER Header Log
(PCI_ERR_HEADER_LOG) registers, which are also 32 bits, into struct
aer_header_log_regs.  Declare those members as "u32" as well.

No functional changes intended.

Link: https://lore.kernel.org/r/20231206224231.732765-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-02 16:51:39 -06:00
Bjorn Helgaas
1291b716bb PCI/AER: Decode Requester ID when no error info found
When a device with AER detects an error, it logs error information in its
own AER Error Status registers.  It may send an Error Message to the Root
Port (RCEC in the case of an RCiEP), which logs the fact that an Error
Message was received (Root Error Status) and the Requester ID of the
message source (Error Source Identification).

aer_print_port_info() prints the Requester ID from the Root Port Error
Source in the usual Linux "bb:dd.f" format, but when find_source_device()
finds no error details in the hierarchy below the Root Port, it printed the
raw Requester ID without decoding it.

Decode the Requester ID in the usual Linux format so it matches other
messages.

Sample message changes:

  - pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5
  - pcieport 0000:00:1c.5: AER: can't find device of ID00e5
  + pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
  + pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5

Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2024-01-02 16:51:27 -06:00
Bjorn Helgaas
02a06f5f1a PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
The PCIe spec classifies errors as either "Correctable" or "Uncorrectable".
Previously we printed these as "Corrected" or "Uncorrected".  To avoid
confusion, use the same terms as the spec.

One confusing situation is when one agent detects an error, but another
agent is responsible for recovery, e.g., by re-attempting the operation.
The first agent may log a "correctable" error but it has not yet been
corrected.  The recovery agent must report an uncorrectable error if it is
unable to recover.  If we print the first agent's error as "Corrected", it
gives the false impression that it has already been resolved.

Sample message change:

  - pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5
  + pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5

Link: https://lore.kernel.org/r/20231206224231.732765-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2024-01-02 16:50:56 -06:00
Jakub Kicinski
3e64db35bc Revert "net: mdio: get/put device node during (un)registration"
This reverts commit cff9c565e6.

Revert based on feedback from Russell.

Link: https://lore.kernel.org/all/ZZPtUIRerqTI2%2Fyh@shell.armlinux.org.uk/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 14:23:39 -08:00
David S. Miller
1e71017b6e Merge branch 'renesas-rzg3s-add-support-for-ethernet'
Claudiu Beznea says:

====================
renesas: rzg3s: Add support for Ethernet

Series adds Ethernet support for Renesas RZ/G3S.
Along with it preparatory cleanups and fixes were included.
====================

Link: https://lore.kernel.org/r/20231207070700.4156557-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 14:22:06 -08:00
Claudiu Beznea
060baa9b90 dt-bindings: net: renesas,etheravb: Document RZ/G3S support
Document Ethernet RZ/G3S support. Ethernet IP is similar to the one
available on RZ/G2L devices.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 14:19:56 -08:00
Simon Horman
55f96e8bbe i40e: Avoid unnecessary use of comma operator
Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.

Flagged by clang-17 -Wcomma

No functional change intended.
Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 13:46:18 -08:00
Andrii Staikov
31deb12e85 i40e: Fix VF disable behavior to block all traffic
Currently, if a VF is disabled using the
'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still
able to receive traffic.

Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable'
to completely shutdown the VF's queues making it entirely disabled and
not able to receive or send any traffic.

Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable'
command to make a VF do reinitialization bringing the queues back up.

Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 13:46:18 -08:00
Jedrzej Jagielski
5795f533f3 ixgbe: Refactor returning internal error codes
Change returning codes to the kernel ones instead of
the internal ones for the entire ixgbe driver.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 13:46:00 -08:00
Jedrzej Jagielski
6c1b4af8c1 ixgbe: Refactor overtemp event handling
Currently ixgbe driver is notified of overheating events
via internal IXGBE_ERR_OVERTEMP error code.

Change the approach for handle_lasi() to use freshly introduced
is_overtemp function parameter which set when such event occurs.
Change check_overtemp() to bool and return true if overtemp
event occurs.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 13:30:26 -08:00
Ovidiu Panait
738808ae82 ixgbe: report link state for VF devices
The link state of VF devices can be controlled via "ip link set", but the
current state (auto/disabled) is not reported by "ip link show".

Update ixgbe_ndo_get_vf_config() to make this info available to userspace.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 13:30:26 -08:00
Maurizio Lombardi
75011bd0f9 nvmet-tcp: remove boilerplate code
Simplify the nvmet_tcp_handle_h2c_data_pdu() function by removing
boilerplate code.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-01-02 12:56:28 -08:00
Maurizio Lombardi
0849a54413 nvmet-tcp: fix a crash in nvmet_req_complete()
in nvmet_tcp_handle_h2c_data_pdu(), if the host sends a data_offset
different from rbytes_done, the driver ends up calling nvmet_req_complete()
passing a status error.
The problem is that at this point cmd->req is not yet initialized,
the kernel will crash after dereferencing a NULL pointer.

Fix the bug by replacing the call to nvmet_req_complete() with
nvmet_tcp_fatal_error().

Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Reviewed-by: Keith Busch <kbsuch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-01-02 12:56:19 -08:00
Maurizio Lombardi
efa5630590 nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length
If the host sends an H2CData command with an invalid DATAL,
the kernel may crash in nvmet_tcp_build_pdu_iovec().

Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp]
Call trace:
  process_one_work+0x174/0x3c8
  worker_thread+0x2d0/0x3e8
  kthread+0x104/0x110

Fix the bug by raising a fatal error if DATAL isn't coherent
with the packet size.
Also, the PDU length should never exceed the MAXH2CDATA parameter which
has been communicated to the host in nvmet_tcp_handle_icreq().

Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-01-02 12:56:03 -08:00
Steven Rostedt (Google)
fd56cd5f6d eventfs: Fix bitwise fields for "is_events"
A flag was needed to denote which eventfs_inode was the "events"
directory, so a bit was taken from the "nr_entries" field, as there's not
that many entries, and 2^30 is plenty. But the bit number for nr_entries
was not updated to reflect the bit taken from it, which would add an
unnecessary integer to the structure.

Link: https://lore.kernel.org/linux-trace-kernel/20240102151832.7ca87275@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 7e8358edf5 ("eventfs: Fix file and directory uid and gid ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-01-02 15:20:44 -05:00
Steven Rostedt (Google)
ad57986463 tracefs: Check for dentry->d_inode exists in set_gid()
If a getdents() is called on the tracefs directory but does not get all
the files, it can leave a "cursor" dentry in the d_subdirs list of tracefs
dentry. This cursor dentry does not have a d_inode for it. Before
referencing tracefs_inode from the dentry, the d_inode must first be
checked if it has content. If not, then it's not a tracefs_inode and can
be ignored.

The following caused a crash:

 #define getdents64(fd, dirp, count) syscall(SYS_getdents64, fd, dirp, count)
 #define BUF_SIZE 256
 #define TDIR "/tmp/file0"

 int main(void)
 {
	char buf[BUF_SIZE];
	int fd;
       	int n;

       	mkdir(TDIR, 0777);
	mount(NULL, TDIR, "tracefs", 0, NULL);
       	fd = openat(AT_FDCWD, TDIR, O_RDONLY);
       	n = getdents64(fd, buf, BUF_SIZE);
       	ret = mount(NULL, TDIR, NULL, MS_NOSUID|MS_REMOUNT|MS_RELATIME|MS_LAZYTIME,
		    "gid=1000");
	return 0;
 }

That's because the 256 BUF_SIZE was not big enough to read all the
dentries of the tracefs file system and it left a "cursor" dentry in the
subdirs of the tracefs root inode. Then on remounting with "gid=1000",
it would cause an iteration of all dentries which hit:

	ti = get_tracefs(dentry->d_inode);
	if (ti && (ti->flags & TRACEFS_EVENT_INODE))
		eventfs_update_gid(dentry, gid);

Which crashed because of the dereference of the cursor dentry which had a NULL
d_inode.

In the subdir loop of the dentry lookup of set_gid(), if a child has a
NULL d_inode, simply skip it.

Link: https://lore.kernel.org/all/20240102135637.3a21fb10@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240102151249.05da244d@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 7e8358edf5 ("eventfs: Fix file and directory uid and gid ownership")
Reported-by: "Ubisectech Sirius" <bugreport@ubisectech.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-01-02 15:20:22 -05:00
Kunwu Chan
3027e7b15b ice: Fix some null pointer dereference issues in ice_ptp.c
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Fixes: d938a8cca8 ("ice: Auxbus devices & driver for E822 TS")
Cc: Kunwu Chan <kunwu.chan@hotmail.com>
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Jan Glaza
b8ab885819 ice: ice_base.c: Add const modifier to params and vars
Add const modifier to function parameters and variables where appropriate
in ice_base.c and corresponding declarations in ice_base.h.

The reason for starting the change is that read-only pointers should be
marked as const when possible to allow for smoother and more optimal code
generation and optimization as well as allowing the compiler to warn the
developer about potentially unwanted modifications, while not carrying
noticeable negative impact.

Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Sachin Bahadur <sachin.bahadur@intel.com>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Jan Sokolowski
f9f9de23dc ice: remove rx_len_errors statistic
It was found that this statistic is incorrectly
reported by HW and thus, useless.

As RX length error statistics are shown to the
end user when requested, the values reported
are misleading.

Thus, that value is no longer reported and
doesn't count anymore when adding all rx errors.

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Jacob Keller
2a2cb4c6c1 ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()
The ice_vf_create_vsi() function and its VF ops helper introduced by commit
a4c785e8162e ("ice: convert vf_ops .vsi_rebuild to .create_vsi") are used
during an individual VF reset to re-create the VSI. This was done in order
to ensure that the VSI gets properly reconfigured within the hardware.

This is somewhat heavy handed as we completely release the VSI memory and
structure, and then create a new VSI. This can also potentially force a
change of the VSI index as we will re-use the first open slot in the VSI
array which may not be the same.

As part of implementing devlink reload, commit 6624e780a5 ("ice: split
ice_vsi_setup into smaller functions") split VSI setup into smaller
functions, introducing both ice_vsi_cfg() and ice_vsi_decfg() which can be
used to configure or deconfigure an existing software VSI structure.

Rather than completely removing the VSI and adding a new one using the
.create_vsi() VF operation, simply use ice_vsi_decfg() to remove the
current configuration. Save the VSI type and then call ice_vsi_cfg() to
reconfigure the VSI as the same type that it was before.

The existing reset logic assumes that all hardware filters will be removed,
so also call ice_fltr_remove_all() before re-configuring the VSI.

This new operation does not re-create the VSI, so rename it to
ice_vf_reconfig_vsi().

The new approach can safely share the exact same flow for both SR-IOV VFs
as well as the Scalable IOV VFs being worked on. This uses less code and is
a better abstraction over fully deleting the VSI and adding a new one.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Andrii Staikov
aa4967d852 ice: Add support for packet mirroring using hardware in switchdev mode
Switchdev mode allows to add mirroring rules to mirror incoming and
outgoing packets to the interface's port representor. Previously, this was
available only using software functionality. Add possibility to offload
this functionality to the NIC hardware.

Introduce ICE_MIRROR_PACKET filter action to the ice_sw_fwd_act_type enum
to identify the desired action and pass it to the hardware as well as the
VSI to mirror.

Example of tc mirror command using hardware:
  tc filter add dev ens1f0np0 ingress protocol ip prio 1 flower src_mac
  b4:96:91:a5:c7:a7 skip_sw action mirred egress mirror dev eth1

ens1f0np0 - PF
b4:96:91:a5:c7:a7 - source MAC address
eth1 - PR of a VF to mirror to

Co-developed-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Karol Kolacinski
82e71b226e ice: Enable SW interrupt from FW for LL TS
Introduce new capability - Low Latency Timestamping with Interrupt.
On supported devices, driver can request a single timestamp from FW
without polling the register afterwards. Instead, FW can issue
a dedicated interrupt when the timestamp was read from the PHY register
and its value is available to read from the register.
This eliminates the need of bottom half scheduling, which results in
minimal delay for timestamping.

For this mode, allocate TS indices sequentially, so that timestamps are
always completed in FIFO manner.

Co-developed-by: Yochai Hagvi <yochai.hagvi@intel.com>
Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:32 -08:00
Karol Kolacinski
00d5000144 ice: Schedule service task in IRQ top half
Schedule service task and EXTTS in the top half to avoid bottom half
scheduling if possible, which significantly reduces timestamping delay.

Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02 11:18:31 -08:00
Dan Williams
11c8393202 Merge branch 'for-6.8/cxl-cdat' into for-6.8/cxl
Pick up the CDAT parsing and QOS class infrastructure for v6.8.
2024-01-02 11:03:04 -08:00
Randy Dunlap
58f1e9d3a3 cxl/region: use %pap format to print resource_size_t
Use "%pap" to print a resource_size_t (phys_addr_t derived type)
to prevent build warnings on 32-bit arches (seen on i386 and
riscv-32).

../drivers/cxl/core/region.c: In function 'alloc_hpa':
../drivers/cxl/core/region.c:556:25: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 5 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
  556 |                         "HPA allocation error (%ld) for size:%#llx in %s %pr\n",

Fixes: 7984d22f13 ("cxl/region: Add dev_dbg() detail on failure to allocate HPA space")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Fan Ni <fan.ni@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc:  <linux-cxl@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102173917.19718-1-rdunlap@infradead.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2024-01-02 11:02:49 -08:00
Paolo Bonzini
9cc52627c7 KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
 - Generate ISA extension reg_list using macros in get-reg-list selftest
 - Steal time account support along with selftest
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmWQ+cgACgkQrUjsVaLH
 LAckBA//R4X9L5ugfPdDunp3ntjZXmNtBS5pM2jD+UvaoFn2kOA1o5kOD5mXluuh
 0imNjVuzlrX7XoAATQ4BoeoXg0whDbnv/8TE13KqSl1PfNziH2p5YD2DuHXPST3B
 V2VHrGACZ4wN074Whztl0oYI72obGnmpcsiglifkeCvRPerghHuDu40eUaWvCmgD
 DPwT+bjBgxkDZ4IheyytUrPql6reALh1Qo1vfj0FsJAgj+MAqQeD8n6rixSPnOdE
 9XXa4jdu7ycDp675VX/DVEWsNBQGPrsRK/uCiMksO36td+wLCKpAkvX95mE0w/L8
 qFJ+dN1c+1ZkjooHdVLfq2MjxaIRwmIowk7SeJbpvGIf/zG3r7eany7eXJT0+NjO
 22j5FY2z1NqcSG6Fazx76Qp2vVBVbxHShP9h7d6VTZYS7XENjmV6IWHpTSuSF8+n
 puj8Nf5C7WuqbySirSgQndDuKawn9myqfXXEoAuSiZ+kVyYEl8QnXm2gAIcxRDHX
 x+NDPMv0DpMBRO9qa/tXeqgNue/XOTJwgbmXzAlCNff3U7hPIHJ/5aZiJ/Re5TeE
 DxiU9AmIsNN2Bh0csS/wQbdScIqkOdOiDYEwT1DXOJWpmhiyCW7vR8ltaIuMJ4vP
 DtlfuUlSe4aml957nAiqqyjQAY/7gqmpoaGwu+lmrOX1K7fdtF0=
 =FeiG
 -----END PGP SIGNATURE-----

Merge tag 'kvm-riscv-6.8-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 6.8 part #1

- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
2024-01-02 13:19:40 -05:00
Paolo Bonzini
731859dde8 - uvdevice fixed additional data return length
- stfle (feature indication) vsie fixes and minor cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEwGNS88vfc9+v45Yq41TmuOI4ufgFAmWUBE8ACgkQ41TmuOI4
 ufg9jA//YjZ725t0nTIMa1SzmFRJRvuAI6JBSnKhJI0/Z+aXiuUZm5tyFOVrZNLB
 tLTlTbTNA5ZzpyrvdNPTVfRKzK5nA7XtHY50Id3leyjsmhSPMWyiOZOn46mlCSAS
 UB9Fxu54RqEu4qiEkFFq4OVhMq0nYldK7pTSfQZW0FfnU4bC0mwg/qQ+u1v0GTRN
 dGmzhpqf2CTT8x7YhzAvOViVgMxQghb34Pfhar/mf0n3LCP0Shx5qOqLyja/+M/+
 EXk4vGF4vHYUB0HJkuAEAiLeyqztE5kty5u/hSQ2bk2dImBdeCg9eN6JMTzZKn6t
 yAdMdaNUpR769MnckKKG1qVKxuggzaB4toY9EVPLTHk42ZiqZPHo8avPCEsxnz+n
 rJKtxy0EPm74TPGG9Z2/v8dIB1VOBQ3V9KLu+hnR6BDw5DZJc/1GylEW6NyuVhZq
 Ak8XjFcY2Zx2tFWNwppoPziTRpsnbgevhAomyDvVelAO2buU6SXR/Rv7AsY97dEj
 2YTCHaBY1j2TjioQJm/AjOvBy0JhWGx9Wdni+ZyAdNG2xX7/JUbp1jKHHXp7Eolj
 7/driKHsNeqw2pRulEoLGQeTlx6GoabXb8HVqwPX8fC69WzJ7YQi4giQTX7rZR4B
 Mg6AMGl24iNjaHSIXrNbg9JrYjgOS45sZ2BBRybdhTmKBwbNGSk=
 =IY7z
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- uvdevice fixed additional data return length
- stfle (feature indication) vsie fixes and minor cleanup
2024-01-02 13:18:30 -05:00
Paolo Bonzini
136292522e LoongArch KVM changes for v6.8
1. Optimization for memslot hugepage checking.
 2. Cleanup and fix some HW/SW timer issues.
 3. Add LSX/LASX (128bit/256bit SIMD) support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmWGu+0WHGNoZW5odWFj
 YWlAa2VybmVsLm9yZwAKCRAChivD8uImesO7D/wOdYP96R+mRzpLBeuTtFxU8e4A
 3n2luxOeP8v1WYtQ9H8M01Wgly+9u6cJ2pgAlv79BQHfmCfC0aWQLmpnCZmk/mYW
 wtQ75ASA3Qg6zOBWEksCkA0LUdPDHfQuaaUXT7RYZ7QtHKSNkkhsw2nMCq6fgrXU
 RnZjGctjuxgYSqQtwzfYO2AjSBAfAq1MjSzCTULJ0KkE8o5Bg0KOoGj8ijC1U+ua
 QWBnqTNzeKmYmqAFfhXoiiFYcuBUq7DEk5RtwDU7SeqqJEV3a8AbbsrWfz+wMemG
 gri95uRxvnhpPZ+6/PrVjIezqexPJmQ9+tjY6mxh/bPRnS5ICFygjV3lt050JUK8
 xIaJEFvl7g88RIz5mnTeM9tU4ibIsCLgA9zj33ps2H7QP5NazUm1dzk1YGAgqPdw
 m5hjwtTFQEujQM6cz1DLfhoi15VDNcYUonJIvGFZMhl7InitDpB3u9sI+AVGIVUG
 yKzBkqGB1L1vbJGnuWmspEqSUo7Z9iYzuVGbOnjc9LKQ/8OpLxj0brymYheA+CKG
 CIdULximQFVEHc2lbE+H+bW4hnrFP4sN9hlTng7KN7ommCIg+FltisM8Nt5NLWID
 9ywLj4Qa0Qrc5vB3FJ8+ksuDe2nD83uVLj247R7B0wxQcYw4ocyW/YU+gayF4EjY
 6azutwllW5ZB+I3hyw==
 =phol
 -----END PGP SIGNATURE-----

Merge tag 'loongarch-kvm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD

LoongArch KVM changes for v6.8

1. Optimization for memslot hugepage checking.
2. Cleanup and fix some HW/SW timer issues.
3. Add LSX/LASX (128bit/256bit SIMD) support.
2024-01-02 13:16:29 -05:00
Shuicheng Lin
835e4d9bb3 drm/i915/guc: Change wa and EU_PERF_CNTL registers to MCR type
Some of the wa registers are MCR register, and EU_PERF_CNTL registers
are MCR register.
MCR register needs extra process for read/write.
As normal MMIO register also could work with the MCR register process,
change all wa registers to MCR type for code simplicity.

Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102010231.843778-1-shuicheng.lin@intel.com
2024-01-02 10:09:26 -08:00
Uwe Kleine-König
d642ef7111 virt: sev-guest: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/52826a50250304ab0af14c594009f7b901c2cd31.1703596577.git.u.kleine-koenig@pengutronix.de
2024-01-02 19:07:18 +01:00
Ilpo Järvinen
ac4f1897fa PCI: Fix 64GT/s effective data rate calculation
Unlike the lower rates, the PCIe 64GT/s Data Rate uses 1b/1b encoding, not
128b/130b (PCIe r6.1 sec 1.2, Table 1-1).  Correct the PCIE_SPEED2MBS_ENC()
calculation to reflect that.

Link: https://lore.kernel.org/r/20240102172701.65501-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-01-02 12:06:47 -06:00
Qiuxu Zhuo
1e92af09fa EDAC/skx_common: Filter out the invalid address
Decoding an invalid address with certain firmware decoders could
cause a #PF (Page Fault) in the EFI runtime context, which could
subsequently hang the system. To make {i10nm,skx}_edac more robust
against such bogus firmware decoders, filter out invalid addresses
before allowing the firmware decoder to process them.

Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20231207014512.78564-1-qiuxu.zhuo@intel.com
2024-01-02 09:20:08 -08:00
Kevin Hao
a280c9ceec jfs: Add missing set_freezable() for freezable kthread
The kernel thread function jfs_lazycommit() and jfs_sync() invoke the
try_to_freeze() in its loop. But all the kernel threads are no-freezable
by default. So if we want to make a kernel thread to be freezable, we have
to invoke set_freezable() explicitly.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2024-01-02 11:06:52 -06:00
Edward Adam Davis
49f9637aaf jfs: fix array-index-out-of-bounds in diNewExt
[Syz report]
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2
index -878706688 is out of range for type 'struct iagctl[128]'
CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
 ubsan_epilogue lib/ubsan.c:217 [inline]
 __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
 diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360
 diAllocExt fs/jfs/jfs_imap.c:1949 [inline]
 diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666
 diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587
 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
 jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225
 vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106
 do_mkdirat+0x264/0x3a0 fs/namei.c:4129
 __do_sys_mkdir fs/namei.c:4149 [inline]
 __se_sys_mkdir fs/namei.c:4147 [inline]
 __x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82
 entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fcb7e6a0b57
Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd83023038 EFLAGS: 00000286 ORIG_RAX: 0000000000000053
RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fcb7e6a0b57
RDX: 00000000000a1020 RSI: 00000000000001ff RDI: 0000000020000140
RBP: 0000000020000140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000286 R12: 00007ffd830230d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

[Analysis]
When the agstart is too large, it can cause agno overflow.

[Fix]
After obtaining agno, if the value is invalid, exit the subsequent process.

Reported-and-tested-by: syzbot+553d90297e6d2f50dbc7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>

Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next
report by kernel test robot (Dan Carpenter).

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2024-01-02 11:02:30 -06:00
Mengqi Zhang
77e01b49e3 mmc: core: Add HS400 tuning in HS400es initialization
During the initialization to HS400es stage, add a HS400 tuning flow as an
optional process. For Mediatek IP, the HS400es mode requires a specific
tuning to ensure the correct HS400 timing setting.

Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Link: https://lore.kernel.org/r/20231225093839.22931-2-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Peter Robinson
09f164d393 mmc: sdhci_omap: Fix TI SoC dependencies
The sdhci_omap is specific to  older TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.

Fixes: 7d326930d3 ("mmc: sdhci-omap: Add OMAP SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Peter Robinson
cb052da7f0 mmc: sdhci_am654: Fix TI SoC dependencies
The sdhci_am654 is specific to recent TI SoCs, update the
dependencies for those SoCs and compile testing. While we're
at it update the text to reflect the wider range of
supported TI SoCS the driver now supports.

Fixes: 41fd4caeb0 ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Lin Gui
e4df56ad0b mmc: core: Add wp_grp_size sysfs node
The eMMC card can be set into write-protected mode to prevent data from
being accidentally modified or deleted. Wp_grp_size (Write Protect Group
Size) refers to an attribute of the eMMC card, used to manage write
protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size
(Write Protect Group Size) indicates how many eMMC blocks are contained in
each write protection group on the eMMC card.

To allow userspace easy access of the CSD register bits, let's add sysfs
node "wp_grp_size".

Signed-off-by: Lin Gui <lin.gui@mediatek.com>
Signed-off-by: Bo Ye <bo.ye@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Adrian Hunter
b062136d0d mmc: mmc_test: Add re-tuning test
Add a test to repeatedly re-tune in between random reads. The test is
non-destructive of data on the card and runs for 30 seconds. It can be
repeated to test for longer durations.

If re-tuning is not supported, the test is skipped.

Example:

  # echo 'mmc1:0001' >  /sys/bus/mmc/drivers/mmcblk/unbind
  # echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmc_test/bind
  [   36.642257] mmc_test mmc1:0001: Card claimed for testing.
  # cat /sys/kernel/debug/mmc1/mmc1\:0001/testlist | grep tuning
  52:     Re-tuning reliability
  # echo 52 > /sys/kernel/debug/mmc1/mmc1\:0001/test
  [   91.522555] mmc1: Starting tests of card mmc1:0001...
  [   91.528425] mmc1: Test case 52. Re-tuning reliability...
  [  121.536682] mmc1: Result: OK
  [  121.539572] mmc1: Tests completed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20231214090902.43628-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Andy Shevchenko
84a6be7db9 mmc: mmc_spi: remove custom DMA mapped buffers
There is no need to duplicate what SPI core or individual controller
drivers already do, i.e. mapping the buffers for DMA capable transfers.

Note, that the code, besides its redundancy, was buggy: strictly speaking
there is no guarantee, while it's true for those which can use this code
(see below), that the SPI host controller _is_ the device which does DMA.

Also see the Link tags below.

Additional notes. Currently only two SPI host controller drivers may use
premapped (by the user) DMA buffers:

  - drivers/spi/spi-au1550.c

  - drivers/spi/spi-fsl-spi.c

Both of them have DMA mapping support code. I don't expect that SPI host
controller code is worse than what has been done in mmc_spi. Hence I do
not expect any regressions here. Otherwise, I'm pretty much sure these
regressions have to be fixed in the respective drivers, and not here.

That said, remove all related pieces of DMA mapping code from mmc_spi.

Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/
Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02 17:54:05 +01:00
Abdel Alkuor
4b6358e1fe hwmon: (lm75) Add AMS AS6200 temperature sensor
as6200 is a temperature sensor with 0.0625°C resolution and a
range between -40°C to 125°C.

By default, the driver configures as6200 as following:
- Converstion rate: 8 Hz
- Conversion mode: continuous
- Consecutive fault counts: 4 samples
- Alert state: high polarity
- Alert mode: comparator mode

Interrupt is supported for the alert pin.

Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Link: https://lore.kernel.org/r/d1686678991bf8ee0d00cb08ca046798f37ca4b3.1703127334.git.alkuor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Abdel Alkuor
de9c6033fb dt-bindings: hwmon: (lm75) Add AMS AS6200 temperature sensor
as6200 is a temperature sensor with a range between -40°C to
125°C degrees and an accuracy of ±0.4°C degree between 0
and 65°C and ±1°C for the other ranges.

Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/17ba2dfdb3d25bf1b5b4ed9f858b6e28902bedbe.1703127334.git.alkuor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Luca Ceresoli
cfe0956446 hwmon: (lm75) remove now-unused include
Including hwmon-sysfs.h is not needed since sysfs code got removed from
this file in commit 08b0243381 ("hwmon: (lm75) Convert to use new hwmon
registration API").

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231228-hwmon-cleanup-include-v1-1-e36f65aee1f0@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Peter Yin
f9e5f289b6 hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controller
Add support for mp2856/mp2857 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is a dual-loop, digital, multi-phase,
modulation controller.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20231211160519.21254-3-potin.lai.pt@gmail.com
[groeck: Fix checkpatch issues, use i2c_get_match_data()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00
Peter Yin
956cf0986a dt-bindings: Add MP2856/MP2857 voltage regulator device
Monolithic Power Systems, Inc. (MPS) MP2856/MP2857
dual-loop, digital, multi-phase controller.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231211160519.21254-2-potin.lai.pt@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-01-02 08:44:57 -08:00