Commit graph

1,264,717 commits

Author SHA1 Message Date
Hans de Goede
f72a9c2b8f
ASoC: rt5645: Refactor rt5645_parse_dt()
Refactor rt5645_parse_dt(), make it take a pointer to
struct rt5645_platform_data as argument instead of passing in
the complete rt5645_priv struct.

While at it also make it void since it always succeeds.

This is a preparation patch for factoring the code to get
the platform-data out into a separate helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21 21:00:44 +00:00
Hans de Goede
8f28e1996a
ASoC: rt5645: Add platform-data for Acer Switch V 10
The Acer Switch V 10 uses the default jack-detect mode 3, but instead of
using an analog microphone it is using a DMIC on dmic-data-pin 1,
like other models following Intel's Braswell's reference design.

Add a DMI quirk pointing to the intel_braswell_platform_data for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21 21:00:43 +00:00
Hans de Goede
51add1687f
ASoC: rt5645: Drop double EF20 entry from dmi_platform_data[]
dmi_platform_data[] first contains a DMI entry matching:

   DMI_MATCH(DMI_PRODUCT_NAME, "EF20"),

and then contains an identical entry except for the match being:

   DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),

Since these are partial (non exact) DMI matches the first match
will also match any board with "EF20EA" in their DMI product-name,
drop the second, redundant, entry.

Fixes: a4dae468cf ("ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series")
Cc: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21 21:00:42 +00:00
Valentin Caron
f6cd66231a
spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc
Add support for the STM32MP25:
- Burst should not be enabled with the new DMA used on STM32MP25.
- STM32MP25 SPI8 has a limited feature set, it can only send words of
  8 or 16 bits and with a maximum words number of 1024.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://msgid.link/r/20231218155721.359198-4-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21 20:44:05 +00:00
Valentin Caron
f034a15105
dt-bindings: spi: stm32: add st,stm32mp25-spi compatible
Add st,stm32mp25-spi compatible in dt-bindings.  STM32MP25 spi is similar
to the STM32H7 except for the following two points:
  - Burst should not be enabled with the new DMA used on STM32MP25.
  - STM32MP25 SPI8 has a limited feature set, it can only send words of
    8 or 16 bits and with a maximum words number of 1024.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://msgid.link/r/20231218155721.359198-3-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21 20:44:04 +00:00
Alain Volmat
6f98f25247
spi: stm32: use dma_get_slave_caps prior to configuring dma channel
First check the dma channel capabilities (max burst) before
configuring the dma channel.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://msgid.link/r/20231218155721.359198-2-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-21 20:44:03 +00:00
Miguel Ojeda
bc2e7d5c29 rust: support srctree-relative links
Some of our links use relative paths in order to point to files in the
source tree, e.g.:

    //! C header: [`include/linux/printk.h`](../../../../include/linux/printk.h)
    /// [`struct mutex`]: ../../../../include/linux/mutex.h

These are problematic because they are hard to maintain and do not support
`O=` builds.

Instead, provide support for `srctree`-relative links, e.g.:

    //! C header: [`include/linux/printk.h`](srctree/include/linux/printk.h)
    /// [`struct mutex`]: srctree/include/linux/mutex.h

The links are fixed after `rustdoc` generation to be based on the absolute
path to the source tree.

Essentially, this is the automatic version of Tomonori's fix [1],
suggested by Gary [2].

Suggested-by: Gary Guo <gary@garyguo.net>
Reported-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Closes: https://lore.kernel.org/r/20231026.204058.2167744626131849993.fujita.tomonori@gmail.com [1]
Fixes: 48fadf4400 ("docs: Move rustdoc output, cross-reference it")
Link: https://lore.kernel.org/rust-for-linux/20231026154525.6d14b495@eugeo/ [2]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20231215235428.243211-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-12-21 20:54:17 +01:00
Boqun Feng
0a7f5ba73e rust: sync: Makes CondVar::wait() an uninterruptible wait
Currently, `CondVar::wait()` is an interruptible wait, and this is
different than `wait_event()` in include/linux/wait.h (which is an
uninterruptible wait). To avoid confusion between different APIs on the
interruptible/uninterruptible, make `CondVar::wait()` an uninterruptible
wait same as `wait_event()`, also rename the old `wait()` to
`CondVar::wait_interruptible()`.

Spotted-by: Tiago Lam <tiagolam@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Tiago Lam <tiagolam@gmail.com>
Link: https://lore.kernel.org/r/20231214200421.690629-1-boqun.feng@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-12-21 20:54:17 +01:00
JiaLong.Yang
ac254dfb98 perf vendor events powerpc: Add PVN for HX-C2000 CPU with Power8 Architecture
HX-C2000 is a new CPU made by HEXIN Technologies Co., Ltd. And a new PVN
0x0066 has been applied from the OpenPower Community for this CPU.

Here is a patch to make perf tool run in the CPU.

Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: JiaLong.Yang <jialong.yang@shingroup.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: shenghui.qu@shingroup.cn
Cc: Zhao Ke <ke.zhao@shingroup.cn>
Cc: zhijie.ren@shingroup.cn
Link: https://lore.kernel.org/r/20231221060242.4532-1-jialong.yang@shingroup.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-21 16:48:01 -03:00
Andrei Otcheretianski
9685091282 wifi: iwlwifi: replace ENOTSUPP with EOPNOTSUPP
ENOTSUPP isn't a standard error code, don't use it. Replace with
EOPNOTSUPP instead.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.a69f4347b5f8.I88429d5de8251287ec0b58ff26a588465b9049a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:17 +01:00
Emmanuel Grumbach
6f3afc6c19 wifi: iwlwifi: mvm: use the new command to clear the internal buffer
The firmware can allow to clear the internal debug buffer. This can be
used to sanitize the data when requested to.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.99aed3efbacb.Ib5bda1d1ff4bae476667737d4081ad066d1d7e6b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:17 +01:00
Johannes Berg
ea5cca78fa wifi: iwlwifi: mvm: disallow puncturing in US/Canada
For now, this isn't allowed. The API to mac80211 isn't great
for this, but we need to change the API to move puncturing
into the chanctx/chandef, and will do it better then.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.38955b68b429.I0c4ae99179b271648a747a51eb04853504c7952c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Johannes Berg
f7e3ab5c33 wifi: iwlwifi: mvm: add US/Canada MCC to API
We don't want to duplicate the definitions later,
so add them to the API.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.6595e905997b.I12354d31676911b29ab30c81a4e9b87f59284d3b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Mukesh Sisodiya
1c022d0145 wifi: iwlwifi: Add rf_mapping of new wifi7 devices
Add the CSR register details for new wifi7 devices and
correctly set rf_name for devices with FM and WP radios.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.a9c04b1e9d13.Ibf258d5e6370d8840a2560282988a1c26377c410@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Miri Korenblit
43ea4035ce wifi: iwlwifi: cleanup BT Shared Single Antenna code
We don't support such device.

Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.6e6961ac0ac5.I923024eac20efd24a5b42332d8e73ae756e0469a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Miri Korenblit
9b6614e5ea wifi: iwlwifi: assign phy_ctxt before eSR activation
eSR is activated when a chanctx is assigned to more than one link.
During eSR activation we should disable RLC for both phys, and configure
the FW with a special phy command for both phys.
Currently we assign the phy_ctxt to the link only after eSR activation,
so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW.
Fix this by first assigning the new phy_ctxt to the link and then
doing the eSR activation.

Fixes: 12bacfc2c0 ("wifi: iwlwifi: handle eSR transitions")
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Anjaneyulu
cb2dfacb19 wifi: iwlwifi: fix out of bound copy_from_user
The driver copies the userspace buffer into an internal NUL
byte terminated buffer. While doing so, it was reading beyond
the end of the userspace buffer, overwriting its own NUL
termination in the process.

Fix this by only copying the correct number of bytes.

Fixes: 3f244876ef ("wifi: iwlwifi: make debugfs entries link specific")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.e4913deb2ad4.Idcf6a7e909ff4b7801cd49c2f691f84a2f68eff9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Ilan Peer
c5bfdb4663 wifi: iwlwifi: mvm: Do not warn if valid link pair was not found
It is possible that though multiple links are enabled we cannot enabled
EMLSR enable more than a single link, e.g., all valid links are on the
same band etc. Thus, do not warn in case no valid link pair is found.

Fixes: b9be67fb42 ("wifi: iwlwifi: mvm: Add basic link selection logic")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.142e57a05230.I7cfe78c94c3d15c4c744bccadd8f187e43594932@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Johannes Berg
6ba40cd3a9 wifi: iwlwifi: mvm: d3: avoid intermediate/early mutex unlock
Now with the mac80211 locking model changed, we no longer can
cause any bad dependencies here between mvm->mutex and other
mutexes in mac80211, so we no longer need to drop the mutex
early or even temporarily. Clean this up.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.1f2f5289ecc6.I7e3b8e806b6d50e88ba0c26767da8261806eb9c7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Johannes Berg
2afc3dad39 wifi: iwlwifi: mvm: send TX path flush in rfkill
If we want to drop packets, that's surely a good thing to
do when we want to enter rfkill. Send this command despite
rfkill so we can successfully clean up everything, we need
to handle it separately since it has CMD_WANT_SKB, so it's
not going to automatically return success when in rfkill.

Fixes: d4e3a341b8 ("iwlwifi: mvm: add support for new flush queue response")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Andrei Otcheretianski
308cc451ef wifi: iwlwifi: Don't mark DFS channels as NO-IR
The NVM_CHANNEL_ACTIVE bit means that active scanning/beaconing is
allowed, however it's not an exact opposite of IEEE80211_CHAN_NO_IR.
For example, NVM_CHANNEL_ACTIVE bit is not set on DFS channels, while
cfg80211 doesn't really expect NO-IR on DFS channels.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.94cd9b96a532.Ifb0e8d8a6a6384493758f26b811d58432536101a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:16 +01:00
Andrei Otcheretianski
a1910a7ffd wifi: iwlwifi: mvm: Allow DFS concurrent operation
AX210 devices allow concurrent P2P operation on DFS channels.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.dc39b33bf507.I04dfda24d73091fb75701279d10ac400314de488@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Johannes Berg
b1a2e5c310 wifi: iwlwifi: mvm: set siso/mimo chains to 1 in FW SMPS request
The firmware changed their mind, don't set the chains to zero,
instead set them to 1 as we normally would for connections to
APs that don't use MIMO.

Fixes: 2a7ce54ccc ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Miri Korenblit
e993af2ed2 wifi: mac80211: add a driver callback to check active_links
During ieee80211_set_active_links() we do (among the others):
1. Call drv_change_vif_links() with both old_active and new_active
2. Unassign the chanctx for the removed link(s) (if any)
3. Assign chanctx to the added link(s) (if any)
4. Call drv_change_vif_links() with the new_active links bitmap

The problem here is that during step #1 the driver doesn't know whether
we will activate multiple links simultaneously or are just doing a link
switch, so it can't check there if multiple links are supported/enabled.
(Some of the drivers might enable/disable this option dynamically)

And during step #3, in which the driver already knows that,
returning an error code (for example when multiple links are not
supported or disabled), will cause a warning, and we will still complete
the transition to the new_active links.
(It is hard to undo things in that stage, since we released channels etc.)

Therefore add a driver callback to check if the desired new_active links
will be supported by the driver or not. This callback will be called
in the beginning of ieee80211_set_active_links() so we won't do anything
before we are sure it is supported.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20231220133549.64c4d70b33b8.I79708619be76b8ecd4ef3975205b8f903e24a2cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Ayala Beker
b1a23f8ae0 wifi: mac80211: fix advertised TTLM scheduling
Handle a case of time overflow, where the switch time might
be smaller than the partial TSF in the beacon.
Additionally, apply advertised TTLM earlier in order to be
ready on time on the newly activated links.

Fixes: 702e80470a ("wifi: mac80211: support handling of advertised TID-to-link mapping")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.15079c34e5c8.I0dd50bcceff5953080cdd7aee5118b72c78c6507@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Benjamin Berg
acc44cbd77 wifi: cfg80211: avoid double free if updating BSS fails
cfg80211_update_known_bss will always consume the passed IEs. As such,
cfg80211_update_assoc_bss_entry also needs to always set the pointers to
NULL so that no double free can occur.

Note that hitting this would probably require being connected to a
hidden BSS which is then doing a channel switch while also switching to
be not hidden anymore at the same time.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.8891edb28d51.Id09c5145363e990ff5237decd58296302e2d53c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Benjamin Berg
31c5e92be5 wifi: cfg80211: ensure cfg80211_bss_update frees IEs on error
cfg80211_bss_update is expected to consume the IEs that are passed into
it in the temporary internal BSS. This did not happen in some error
cases (which are also WARN_ON paths), so change the code to use a common
label and use that everywhere.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.8e72ea105e17.Ic81e9431e980419360e97502ce8c75c58793f05a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Benjamin Berg
32af9a9e10 wifi: cfg80211: free beacon_ies when overridden from hidden BSS
This is a more of a cosmetic fix. The branch will only be taken if
proberesp_ies is set, which implies that beacon_ies is not set unless we
are connected to an AP that just did a channel switch. And, in that case
we should have found the BSS in the internal storage to begin with.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.b898e22dadff.Id8c4c10aedd176ef2e18a4cad747b299f150f9df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Johannes Berg
e62c0fcc0e wifi: mac80211: allow 64-bit radiotap timestamps
When reporting the radiotap timestamp, the mactime field is
usually unused, we take the data from the device_timestamp.
However, there can be cases where the radiotap timestamp is
better reported as a 64-bit value, so since the mactime is
free, add a flag to support using the mactime as a 64-bit
radiotap timestamp.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.00c8b9234f0c.Ie3ce5eae33cce88fa01178e7aea94661ded1ac24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Johannes Berg
d5b6f6d595 wifi: mac80211: rework RX timestamp flags
We only have a single flag free, and before using that for
another mactime flag, instead refactor the mactime flags
to use a 2-bit field.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.d0e664832d14.I20c8900106f9bf81316bed778b1e3ce145785274@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:15 +01:00
Mukesh Sisodiya
645f3d8512 wifi: cfg80211: handle UHB AP and STA power type
UHB AP send supported power type(LPI, SP, VLP)
in beacon and probe response IE and STA should
connect to these AP only if their regulatory support
the AP power type.

Beacon/Probe response are reported to userspace
with reason "STA regulatory not supporting to connect to AP
based on transmitted power type" and it should
not connect to AP.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.cbfbef9170a9.I432f78438de18aa9f5c9006be12e41dc34cc47c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Andrei Otcheretianski
99b6877dce wifi: mac80211_hwsim: Add custom reg for DFS concurrent
Add custom regulatory that marks DFS channels as DFS_CONCURRENT.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.4b08a6530fa3.Ic285ca7a4728e77a4bea1394a6a52cf286fbea22@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Andrei Otcheretianski
513b1a168c wifi: mac80211: Schedule regulatory channels check on bandwith change
Some devices may support concurrent DFS operation which relies on the
BSS channel width for its relaxations. Notify cfg80211 about BW change
so it can schedule regulatory checks.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.e08f8e9ebc67.If8915d13e203ebd380579f55fd9148e9b3f43306@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Andrei Otcheretianski
9be61558de wifi: cfg80211: Schedule regulatory check on BSS STA channel change
Due to different relaxation policies it may be needed to re-check
channels after a BSS station interface is disconnected or performed a
channel switch.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.1f2f8475bcf1.I1879d259d8d756159c8060f61f4bce172e6d323e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Andrei Otcheretianski
41a313d875 wifi: cfg80211: reg: Support P2P operation on DFS channels
FCC-594280 D01 Section B.3 allows peer-to-peer and ad hoc devices to
operate on DFS channels while they operate under the control of a
concurrent DFS master. For example, it is possible to have a P2P GO on a
DFS channel as long as BSS connection is active on the same channel.
Allow such operation by adding additional regulatory flags to indicate
DFS concurrent channels and capable devices. Add the required
relaxations in DFS regulatory checks.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231220133549.bdfb8a9c7c54.I973563562969a27fea8ec5685b96a3a47afe142f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Jouni Malinen
b133fdf07d wifi: mac80211: Skip association timeout update after comeback rejection
It is possible for the TX status report for the (Re)Association Request
frame to be delayed long enough for the AP's (Re)Association Response
frame to be received and processed before it. If that were to happen for
a case where the AP rejects the association with indication to come back
later, the association timeout and retry state should not be modified
anymore with the TX status information that would be processed after
this. Updating the association timeout in such a reverse order of events
could result in shortening the timeouts for the association comeback
mechanism and that could result in the association failing.

Track whether we have already processed association rejection with
comeback time and if so, skip the timeout and retry update on any
following TX status report.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Link: https://msgid.link/20231219174814.2581575-1-j@w1.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Jonathan Corbet
756df98534 wifi: mac80211: address some kerneldoc warnings
include/net/mac80111.h contains a number of either excess or incorrect
kerneldoc entries for structure members, leading to these warnings:

  ./include/net/mac80211.h:491: warning: Excess struct member 'rssi' description in 'ieee80211_event'
  ./include/net/mac80211.h:491: warning: Excess struct member 'mlme' description in 'ieee80211_event'
  ./include/net/mac80211.h:491: warning: Excess struct member 'ba' description in 'ieee80211_event'
  ./include/net/mac80211.h:777: warning: Excess struct member 'ack_enabled' description in 'ieee80211_bss_conf'
  ./include/net/mac80211.h:1222: warning: Excess struct member 'ampdu_ack_len' description in 'ieee80211_tx_info'
  ./include/net/mac80211.h:1222: warning: Excess struct member 'ampdu_len' description in 'ieee80211_tx_info'
  ./include/net/mac80211.h:1222: warning: Excess struct member 'ack_signal' description in 'ieee80211_tx_info'
  ./include/net/mac80211.h:2920: warning: Excess struct member 'radiotap_he' description in 'ieee80211_hw'

Fix or remove the entries as needed.  This change removes 208 warnings from
a "make htmldocs" build.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/87zfy4bhxo.fsf@meer.lwn.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Miri Korenblit
ce10e8653f wifi: mac80211_hwsim: support HE 40 MHz in 2.4 GHz band
We are missing the flag that indicates that capability
of 40 MHz bandwidth support in HE on the LB.
Add it.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://msgid.link/20231220075830.4f10c6b64d1a.I1ba6905c806be6e0548ed15130c0bbb2ee04c9fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Jonathan Corbet
3361597890 wifi: cfg80211: address several kerneldoc warnings
include/net/cfg80211.h includes a number of kerneldoc entries for struct
members that do not exist, leading to these warnings:

  ./include/net/cfg80211.h:3192: warning: Excess struct member 'band_pref' description in 'cfg80211_bss_selection'
  ./include/net/cfg80211.h:3192: warning: Excess struct member 'adjust' description in 'cfg80211_bss_selection'
  ./include/net/cfg80211.h:6181: warning: Excess struct member 'bssid' description in 'wireless_dev'
  ./include/net/cfg80211.h:6181: warning: Excess struct member 'beacon_interval' description in 'wireless_dev'
  ./include/net/cfg80211.h:7299: warning: Excess struct member 'bss' description in 'cfg80211_rx_assoc_resp_data'

Remove and/or repair each entry to address the warnings and ensure a proper
docs build for the affected structures.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://msgid.link/87plz1g2sc.fsf@meer.lwn.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-21 20:35:14 +01:00
Miguel Ojeda
80fe9e5151 rust: upgrade to Rust 1.74.1
This is the next upgrade to the Rust toolchain, from 1.73.0 to 1.74.1
(i.e. the latest) [1].

See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da0 ("rust: upgrade to Rust 1.68.2").

# Unstable features

No unstable features (that we use) were stabilized.

Therefore, the only unstable features allowed to be used outside the
`kernel` crate are still `new_uninit,offset_of`, though other code to
be upstreamed may increase the list (e.g. `offset_of` was added recently).

Please see [3] for details.

# Other improvements

Rust 1.74.0 allows to use `#[repr(Rust)]` explicitly [4], which can be
useful to be explicit about particular cases that would normally use
e.g. the C representation, such as silencing lints like the upcoming
additions we requested [5] to the `no_mangle_with_rust_abi` Clippy lint
(which in turn triggered the `#[repr(Rust)]` addition).

Rust 1.74.0 includes a fix for one of the false negative cases we reported
in Clippy's `disallowed_macros` lint [6] that we would like to use in
the future.

Rust 1.74.1 fixes an ICE that the Apple AGX GPU driver was hitting [7].

# Required changes

For this upgrade, no changes were required (i.e. on our side).

# `alloc` upgrade and reviewing

The vast majority of changes are due to our `alloc` fork being upgraded
at once.

There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.

Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.

Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.

To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:

    # Get the difference with respect to the old version.
    git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
    git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
        cut -d/ -f3- |
        grep -Fv README.md |
        xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
    git -C linux diff --patch-with-stat --summary -R > old.patch
    git -C linux restore rust/alloc

    # Apply this patch.
    git -C linux am rust-upgrade.patch

    # Get the difference with respect to the new version.
    git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
    git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
        cut -d/ -f3- |
        grep -Fv README.md |
        xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
    git -C linux diff --patch-with-stat --summary -R > new.patch
    git -C linux restore rust/alloc

Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.

Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1741-2023-12-07 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/rust/pull/114201 [4]
Link: https://github.com/rust-lang/rust-clippy/issues/11219 [5]
Link: https://github.com/rust-lang/rust-clippy/issues/11431 [6]
Link: https://github.com/rust-lang/rust/issues/117976#issuecomment-1822225691 [7]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Tested-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20231214092958.377061-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-12-21 19:40:26 +01:00
Marco Pagani
4515d08a74 kernel/module: improve documentation for try_module_get()
The sentence "this call will fail if the module is already being
removed" is potentially confusing and may contradict the rest of the
documentation. If one tries to get a module that has already been
removed using a stale pointer, the kernel will crash.

Signed-off-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-12-21 10:26:14 -08:00
David Howells
9a6b294ab4 afs: Fix use-after-free due to get/remove race in volume tree
When an afs_volume struct is put, its refcount is reduced to 0 before
the cell->volume_lock is taken and the volume removed from the
cell->volumes tree.

Unfortunately, this means that the lookup code can race and see a volume
with a zero ref in the tree, resulting in a use-after-free:

    refcount_t: addition on 0; use-after-free.
    WARNING: CPU: 3 PID: 130782 at lib/refcount.c:25 refcount_warn_saturate+0x7a/0xda
    ...
    RIP: 0010:refcount_warn_saturate+0x7a/0xda
    ...
    Call Trace:
     afs_get_volume+0x3d/0x55
     afs_create_volume+0x126/0x1de
     afs_validate_fc+0xfe/0x130
     afs_get_tree+0x20/0x2e5
     vfs_get_tree+0x1d/0xc9
     do_new_mount+0x13b/0x22e
     do_mount+0x5d/0x8a
     __do_sys_mount+0x100/0x12a
     do_syscall_64+0x3a/0x94
     entry_SYSCALL_64_after_hwframe+0x62/0x6a

Fix this by:

 (1) When putting, use a flag to indicate if the volume has been removed
     from the tree and skip the rb_erase if it has.

 (2) When looking up, use a conditional ref increment and if it fails
     because the refcount is 0, replace the node in the tree and set the
     removal flag.

Fixes: 20325960f8 ("afs: Reorganise volume and server trees to be rooted on the cell")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-21 10:16:07 -08:00
Matthew Wilcox (Oracle)
af73483f4e ida: Fix crash in ida_free when the bitmap is empty
The IDA usually detects double-frees, but that detection failed to
consider the case when there are no nearby IDs allocated and so we have a
NULL bitmap rather than simply having a clear bit.  Add some tests to the
test-suite to be sure we don't inadvertently reintroduce this problem.
Unfortunately they're quite noisy so include a message to disregard
the warnings.

Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-21 10:02:28 -08:00
David Howells
a9e01ac8c5 afs: Fix overwriting of result of DNS query
In afs_update_cell(), ret is the result of the DNS lookup and the errors
are to be handled by a switch - however, the value gets clobbered in
between by setting it to -ENOMEM in case afs_alloc_vlserver_list()
fails.

Fix this by moving the setting of -ENOMEM into the error handling for
OOM failure.  Further, only do it if we don't have an alternative error
to return.

Found by Linux Verification Center (linuxtesting.org) with SVACE.  Based
on a patch from Anastasia Belova [1].

Fixes: d5c32c89b2 ("afs: Fix cell DNS lookup")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Anastasia Belova <abelova@astralinux.ru>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: lvc-project@linuxtesting.org
Link: https://lore.kernel.org/r/20231221085849.1463-1-abelova@astralinux.ru/ [1]
Link: https://lore.kernel.org/r/1700862.1703168632@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-12-21 09:57:43 -08:00
Al Viro
c5f3fd2178 apparmorfs: don't duplicate kfree_link()
rawdata_link_cb() is identical to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21 12:53:43 -05:00
Al Viro
12c0c3a65a orangefs: saner arguments passing in readdir guts
orangefs_dir_fill() doesn't use oi and dentry arguments at all
do_readdir() gets dentry, uses only dentry->d_inode; it also
gets oi, which is ORANGEFS_I(dentry->d_inode) (i.e. ->d_inode -
constant offset).
orangefs_dir_mode() gets dentry and oi, uses only to pass those
to do_readdir().
orangefs_dir_iterate() uses dentry and oi only to pass those to
orangefs_dir_fill() and orangefs_dir_more().

The only thing it really needs is ->d_inode; moreover, that's
better expressed as file_inode(file) - no need to go through
->f_path.dentry->d_inode.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21 12:53:36 -05:00
Al Viro
fda4369104 ocfs2_find_match(): there's no such thing as NULL or negative ->d_parent
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21 12:53:30 -05:00
Linus Torvalds
937fd40338 AFS fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAmWEVXEACgkQ+7dXa6fL
 C2sxbw/+IIgTpjfXDGQoGOpcvQyHW+gMGFqrrZjKJZGQiNZ0DfHPciYcMvOOyqZp
 rbt22V/WvQKOlcQ1IYQqjdB47DilFGRepRLZ/fuqq6JDmcHGx2Btj8uJTsV0He4o
 rCLXVrfm/JNYECY6dO5bGizrCYL6clVo0x/U2LPlU/2mbXltY1d1yXtzE++6kBZl
 w/MLJDmQxvONarhpdD0J9E/uAJ+kHX05HhlqnSxu8HEoGHMVka1N5EGAOq9cICvm
 y/8NwnGtflhpJEIso2Kx7XAE8kszXyKw0PJvOaO4GG1PWMs3rIrZbHn7wCbChyMi
 xOw+qZVC60BTang/vEOo5I4eFD+NIdBDoGdyuyNICXDIMQ9WvN2nF5qUdFAeR7Vi
 Dgxld1WWHm6RcOjl6y9t5Na0zJmgdOyONWx6Xli/AJw2RTx5JiVzDuKP6yu+DMvn
 DUPrjEQ1m+qPbTwclEzqu3grNabp7EX1vYRKDC4bf+Lg8iGNxlFp+2uyg14HsDUH
 N/yqnj8MK6ADcVMfZGGUalIzsgN06vHfHhE7Tj4xSnrR1dekxBveNFJM3r+eeaLV
 0VsjHW/IMKPWxO/vDzi6zr0nBeWYQgxAAg+w3LXl3qRGEXlihibmosofovhQFD6k
 GhkXojmc3BeSceVfOcEHZu0xXZIy/2y+hZy95BbNLT/eiCwIf/M=
 =GJNW
 -----END PGP SIGNATURE-----

Merge tag 'afs-fixes-20231221' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull AFS fixes from David Howells:
 "Improve the interaction of arbitrary lookups in the AFS dynamic root
  that hit DNS lookup failures [1] where kafs behaves differently from
  openafs and causes some applications to fail that aren't expecting
  that. Further, negative DNS results aren't getting removed and are
  causing failures to persist.

   - Always delete unused (particularly negative) dentries as soon as
     possible so that they don't prevent future lookups from retrying.

   - Fix the handling of new-style negative DNS lookups in ->lookup() to
     make them return ENOENT so that userspace doesn't get confused when
     stat succeeds but the following open on the looked up file then
     fails.

   - Fix key handling so that DNS lookup results are reclaimed almost as
     soon as they expire rather than sitting round either forever or for
     an additional 5 mins beyond a set expiry time returning
     EKEYEXPIRED. They persist for 1s as /bin/ls will do a second stat
     call if the first fails"

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637 [1]
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>

* tag 'afs-fixes-20231221' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry
  afs: Fix dynamic root lookup DNS check
  afs: Fix the dynamic root's d_delete to always delete unused dentries
2023-12-21 09:53:25 -08:00
Al Viro
3a1613672e reiserfs_add_entry(): get rid of pointless namelen checks
In all cases namelen is ->d_name.len of some dentry; moreover, a dentry
that has passed ->lookup() without triggering ENAMETOOLONG check there.
The comment next to these checks is either a rudiment of some other
check that used to be there once upon a time, or an attempt to come up
with the possible reason for that check (well, more like "why does
ext3 do it?")

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21 12:53:25 -05:00
Al Viro
b64b0732c3 __ocfs2_add_entry(), ocfs2_prepare_dir_for_insert(): namelen checks
namelen can't be zero; neither when it's coming from dentry name,
nor when dealing with orphans (in ocfs2_orphan_add() and
__ocfs2_prepare_orphan_dir()).  Rudiment of old ext2 pointless
check, long gone in ext2 itself...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2023-12-21 12:53:21 -05:00