Maintain Consistent Formatting: Insert Space after #include
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add encryption key size check when acting as peripheral
- Shut up false-positive build warning
- Send reject if L2CAP command request is corrupted
- Fix Use-After-Free in bt_sock_recvmsg
- Fix not notifying when connection encryption changes
- Fix not checking if HCI_OP_INQUIRY has been sent
- Fix address type send over to the MGMT interface
- Fix deadlock in vhci_send_frame
-----BEGIN PGP SIGNATURE-----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=JAze
-----END PGP SIGNATURE-----
Merge tag 'for-net-2023-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Add encryption key size check when acting as peripheral
- Shut up false-positive build warning
- Send reject if L2CAP command request is corrupted
- Fix Use-After-Free in bt_sock_recvmsg
- Fix not notifying when connection encryption changes
- Fix not checking if HCI_OP_INQUIRY has been sent
- Fix address type send over to the MGMT interface
- Fix deadlock in vhci_send_frame
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop common properties already defined in referenced common Qualcomm SoC
TLMM bindings and use "unevaluatedProperties: false". This makes the
binding smaller and easier to review. Additionally this allows now
"wakeup-parent" property coming from common TLMM bindings.
In few places move the "required:" block to bottom, to match convention.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Drop common properties already defined in referenced common Qualcomm SoC
TLMM bindings and use "unevaluatedProperties: false". This makes the
binding smaller and easier to review.
In few places move the "required:" block to bottom, to match convention.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208215534.195854-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reference common Qualcomm SoC TLMM bindings to drop commonly used
properties and also bring other schemas for common definitions.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
X1E80100 TLMM pin controller comes with only one interrupt, so narrow
the number of interrupts previously defined in common TLMM bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SM8650 TLMM pin controller comes with only one interrupt, so narrow
the number of interrupts previously defined in common TLMM bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SM8550 TLMM pin controller comes with only one interrupt, so narrow
the number of interrupts previously defined in common TLMM bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SDX75 TLMM pin controller comes with only one interrupt, so narrow
the number of interrupts previously defined in common TLMM bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SA8775p TLMM pin controller comes with only one interrupt, so narrow
the number of interrupts previously defined in common TLMM bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
QDU1000 TLMM pin controller comes with only one interrupt, so narrow
the number of interrupts previously defined in common TLMM bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Just like regular TLMM pin controllers in Qualcomm SoCs, the Low Power
Audio SubSystem (LPASS) Low Power Island (LPI) TLMM blocks share a lot
of properties, so common part can be moved to separate schema to reduce
code duplication and make reviewing easier.
Except the move of common part, this introduces effective changes:
1. To all LPASS LPI bindings: Reference pinmux-node.yaml in each pin
muxing and configuration node, to bring definition of "function" and
"pins" properties.
2. qcom,sc7280-lpass-lpi-pinctrl: Reference pinctrl.yaml in top leve.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231208215534.195854-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add pinctrl driver for TLMM block found in SM4450 SoC.
Can Guo helped out in reviewing the driver.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231212094900.12615-3-quic_tengfan@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Multi-Purpose Pin controller block is part of an SPMI PMIC (which in
turns sits on an SPMI bus) and uses a single value for the register
property that corresponds to its base address.
Clean up the example by adding a parent PMIC node with proper
'#address-cells' and '#size-cells' properties, dropping the incorrect
second register value, adding some newline separators and increasing the
indentation to four spaces.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231130172834.12653-1-johan+linaro@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The D/B size flag for the 32-bit percpu GDT entry was not set.
The Intel manual (vol 3, section 3.4.5) only specifies the meaning of
this flag for three cases:
1) code segments used for %cs -- doesn't apply here
2) stack segments used for %ss -- doesn't apply
3) expand-down data segments -- but we don't have the expand-down flag
set, so it also doesn't apply here
The flag likely doesn't do anything here, although the manual does also
say: "This flag should always be set to 1 for 32-bit code and data
segments [...]" so we should probably do it anyway.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-6-vegard.nossum@oracle.com
We have no known use for having the CPU track whether GDT descriptors
have been accessed or not.
Simplify the code by adding the flag to the common flags and removing
it everywhere else.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-5-vegard.nossum@oracle.com
Actually replace the numeric values by the new symbolic values.
I used this to find all the existing users of the GDT_ENTRY*() macros:
$ git grep -P 'GDT_ENTRY(_INIT)?\('
Some of the lines will exceed 80 characters, but some of them will be
shorter again in the next couple of patches.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-4-vegard.nossum@oracle.com
We'd like to replace all the magic numbers in various GDT descriptors
with new, semantically meaningful, symbolic values.
In order to be able to verify that the change doesn't cause any actual
changes to the compiled binary code, I've split the change into two
patches:
- Part 1 (this commit): everything _but_ actually replacing the numbers
- Part 2 (the following commit): _only_ replacing the numbers
The reason we need this split for verification is that including new
headers causes some spurious changes to the object files, mostly line
number changes in the debug info but occasionally other subtle codegen
changes.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-3-vegard.nossum@oracle.com
Linus suggested replacing the magic numbers in the GDT descriptors
using preprocessor macros. Designing the interface properly is actually
pretty hard -- there are several constraints:
- you want the final expressions to be readable at a glance; something
like GDT_ENTRY_FLAGS(5, 1, 0, 1, 0, 1, 1, 0) isn't because you need
to visit the definition to understand what each parameter represents
and then match up parameters in the user and the definition (which is
hard when there are so many of them)
- you want the final expressions to be fairly short/information-dense;
something like GDT_ENTRY_PRESENT | GDT_ENTRY_DATA_WRITABLE |
GDT_ENTRY_SYSTEM | GDT_ENTRY_DB | GDT_ENTRY_GRANULARITY_4K is a bit
too verbose to write out every time and is actually hard to read as
well because of all the repetition
- you may want to assume defaults for some things (e.g. entries are
DPL-0 a.k.a. kernel segments by default) and allow the user to
override the default -- but this works best if you can OR in the
override; if you want DPL-3 by default and override with DPL-0 you
would need to start masking off bits instead of OR-ing them in and
that just becomes harder to read
- you may want to parameterize some things (e.g. CODE vs. DATA or
KERNEL vs. USER) since both values are used and you don't really
want prefer either one by default -- or DPL, which is always some
value that is always specified
This patch tries to balance these requirements and has two layers of
definitions -- low-level and high-level:
- the low-level defines are the mapping between human-readable names
and the actual bit numbers
- the high-level defines are the mapping from high-level intent to
combinations of low-level flags, representing roughly a tuple
(data/code/tss, 64/32/16-bits) plus an override for DPL-3 (= USER),
since that's relatively rare but still very important to mark
properly for those segments.
- we have *_BIOS variants for 32-bit code and data segments that don't
have the G flag set and give the limit in terms of bytes instead of
pages
[ mingo: Improved readability bit more. ]
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231219151200.2878271-2-vegard.nossum@oracle.com
Before this patch, transport offset (pkt->thoff) provides an offset
relative to the network header. This is fine for the inet families
because skb->data points to the network header in such case. However,
from netdev/egress, skb->data points to the mac header (if available),
thus, pkt->thoff is missing the mac header length.
Add skb_network_offset() to the transport offset (pkt->thoff) for
netdev, so transport header mangling works as expected. Adjust payload
fast eval function to use skb->data now that pkt->thoff provides an
absolute offset. This explains why users report that matching on
egress/netdev works but payload mangling does not.
This patch implicitly fixes payload mangling for IPv4 packets in
netdev/egress given skb_store_bits() requires an offset from skb->data
to reach the transport header.
I suspect that nft_exthdr and the trace infra were also broken from
netdev/egress because they also take skb->data as start, and pkt->thoff
was not correct.
Note that IPv6 is fine because ipv6_find_hdr() already provides a
transport offset starting from skb->data, which includes
skb_network_offset().
The bridge family also uses nft_set_pktinfo_ipv4_validate(), but there
skb_network_offset() is zero, so the update in this patch does not alter
the existing behaviour.
Fixes: 42df6e1d22 ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
To be compatible with SCU firmware based on 1.15 a different clock
routing for LVDS is needed.
Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231218122407.2757175-1-alexander.stein@ew.tq-group.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
In cases where imx_clk_is_resource_owned() returns false, the code path
does not handle the failure gracefully, potentially leading to a memory
leak. This fix ensures proper cleanup by freeing the allocated memory
for 'clk_node' before returning.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/all/20231210171907.3410922-1-visitorckw@gmail.com/
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
BFPT 17th DWORD contains the information about 1-1-8 and 1-8-8.
Parse BFPT DWORD[17] instruction to determine whether flash
supports 1-1-8 and 1-8-8, and set its dummy cycles accordingly.
Validated only the 1-1-8 read using a macronix flash with
Xilinx board zynq-picozed.
Signed-off-by: JaimeLiao <jaimeliao@mxic.com.tw>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20231219102103.92738-2-jaimeliao.tw@gmail.com
[ta: update commit message, get rid of extra dereference]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
At probing time, the MANA core code allocates EQs for supporting interrupts
on Ethernet queues. The same interrupt mechanisum is used by RAW QP.
Use the same EQs for delivering interrupts on the CQ for the RAW QP.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1702692255-23640-4-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Software client needs to register with the RDMA management interface on
the SoC to access more features, including querying device capabilities
and RC queue pair.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1702692255-23640-2-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The ds28ec20 eeprom is (almost) backward compatible with the
ds2433. The only differences are:
- the eeprom size is now 2560 bytes instead of 512;
- the number of pages is now 80 (same page size as the ds2433: 256 bits);
- the programming time has increased from 5ms to 10ms;
This patch adds support for the ds28ec20 to the ds2433 driver. From
the datasheet: The DS28EC20 provides a high degree of backward
compatibility with the DS2433. Besides the different family codes, the
only protocol change that is required on an existing DS2433
implementation is a lengthening of the programming duration (tPROG)
from 5ms to 10ms.
dmesg now returns:
w1_master_driver w1_bus_master1: Attaching one wire slave 43.000000478756 crc e0
instead of:
w1_master_driver w1_bus_master1: Attaching one wire slave 43.000000478756 crc e0
w1_master_driver w1_bus_master1: Family 43 for 43.000000478756.e0 is not registered.
Test script writing/reading random data (CONFIG_W1_SLAVE_DS2433_CRC is
not set):
#!/bin/sh
EEPROM=/sys/bus/w1/devices/43-000000478756/eeprom
BINFILE1=/home/root/file1.bin
BINFILE2=/home/root/file2.bin
for BS in 1 2 3 4 8 16 32 64 128 256 512 1024 2560; do
dd if=/dev/random of=${BINFILE1} bs=${BS} count=1 status=none
dd if=${BINFILE1} of=${EEPROM} status=none
dd if=${EEPROM} of=${BINFILE2} bs=${BS} count=1 status=none
if ! cmp --silent ${BINFILE1} ${BINFILE2}; then
echo file1
hexdump ${BINFILE1}
echo file2
hexdump ${BINFILE2}
echo FAIL
exit 1
fi
echo "${BS} OK!"
done
Results:
# ./test.sh
1 OK!
2 OK!
3 OK!
4 OK!
8 OK!
16 OK!
32 OK!
64 OK!
128 OK!
256 OK!
512 OK!
1024 OK!
2560 OK!
Tests with CONFIG_W1_SLAVE_DS2433_CRC=y:
$ cat /proc/config.gz | gunzip | grep CONFIG_W1_SLAVE_DS2433
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
# create a 32 bytes block with a crc, i.e.:
00000000 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
00000010 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
# fill all 80 blocks
$ dd if=test.bin of=/sys/bus/w1/devices/43-000000478756/eeprom bs=32 count=80
# read back all blocks, i.e.:
$ hexdump -C /sys/bus/w1/devices/43-000000478756/eeprom
00000000 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
00000010 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
00000020 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
00000030 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
...
000009e0 31 32 33 34 35 36 37 38 39 3a 3b 3c 3d 3e 3f 40 |123456789:;<=>?@|
000009f0 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e ba 63 |ABCDEFGHIJKLMN.c|
00000a00
Note: both memories (ds2433 and ds28ec20) have been tested with the
new driver.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Co-developed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-6-marc.ferland@sonatest.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The ds2433 driver uses the 'validcrc' variable to mark out which pages
have been successfully (crc is valid) retrieved from the eeprom and
placed in the internal 'memory' buffer (see CONFIG_W1_SLAVE_DS2433_CRC).
The current implementation assumes that the number of pages will never
go beyond 32 pages (bit field is a u32). This is fine for the ds2433
since it only has 16 pages.
On the ds28ec20 though, the number of pages increases to 80 which will
not fit on a single u32.
As a solution, I replaced the u32 variable with a standard bitmap and
set the number of bits to 32 which is the same size we had before.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-5-marc.ferland@sonatest.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add a ds2433_config structure for parameters that are different
between the ds2433 and the ds28ec20. The goal is to reuse the same
code for both chips.
A pointer to this config structure is added to w1_f23_data and the
CONFIG_W1_SLAVE_DS2433_CRC ifdefs are adjusted since now both driver
configurations (with or without crc support) will make use of
w1_f23_data.
Also, the 'memory' buffer is now dynamically allocated based on the
size specififed in the config structure to help support memories of
different sizes.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-4-marc.ferland@sonatest.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The current ds_read_block function only supports block sizes up to
128 bytes, which is the depth of the 'data out' fifo on the ds2490.
Reading larger blocks will fail with a: -110 (ETIMEDOUT) from
usb_control_msg(). Example:
$ dd if=/sys/bus/w1/devices/43-000000478756/eeprom bs=256 count=1
yields to the following message from the kernel:
usb 5-1: Failed to write 1-wire data to ep0x2: err=-110.
I discovered this issue while implementing support for the ds28ec20
eeprom in the w1-2433 driver. This driver accepts reading blocks of
sizes up to the size of the entire memory (2560 bytes in the case of
the ds28ec20). Note that this issue _does not_ arise when the kernel
is configured with CONFIG_W1_SLAVE_DS2433_CRC enabled since in this
mode the driver reads one 32 byte block at a time (a single memory
page).
Also, from the ds2490 datasheet (2995.pdf, page 22, BLOCK I/O
command):
For a block write sequence the EP2 FIFO must be pre-filled with
data before command execution. Additionally, for block sizes
greater then the FIFO size, the FIFO content status must be
monitored by host SW so that additional data can be sent to the
FIFO when necessary. A similar EP3 FIFO content monitoring
requirement exists for block read sequences. During a block read
the number of bytes loaded into the EP3 FIFO must be monitored so
that the data can be read before the FIFO overflows.
Breaking the block in smaller 128 bytes chunks and simply calling the
original code sequence has solved the issue for me.
Tested with a DS1490F usb<->one-wire adapter and both the DS28EC20 and
DS2433 eeprom memories.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/r/20231218150230.1992448-2-marc.ferland@sonatest.com
[krzysztof: fix checkpatch 'spaces preferred around']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fix the following warnings reported
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:909:27: warning: invalid assignment: |=
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:909:27: left side has type restricted __le16
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:909:27: right side has type unsigned long
...
drivers/infiniband/hw/bnxt_re/qplib_fp.c:1620:44: warning: invalid assignment: |=
drivers/infiniband/hw/bnxt_re/qplib_fp.c:1620:44: left side has type restricted __le64
drivers/infiniband/hw/bnxt_re/qplib_fp.c:1620:44: right side has type unsigned long long
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312200537.HoNqPL5L-lkp@intel.com/
Fixes: 07f830ae49 ("RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1703046717-8914-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
User Doorbell page indexes start at an offset for GenP7 adapters.
Fix the offset that will be used for user doorbell page indexes.
Fixes: a62d685814 ("RDMA/bnxt_re: Update the BAR offsets")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702987900-5363-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Now that the driver core can properly handle constant struct bus_type,
move the tb_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Andreas Noever <andreas.noever@gmail.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: <linux-usb@vger.kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/2023121904-utopia-broadcast-06d1@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
disk_clear_zoned only needs to be called when a device reported zone
managed mode first and we clear it. Add a check so that disk_clear_zoned
isn't called on devices that were never zoned.
This avoids a fairly expensive queue freezing when revalidating
conventional devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only use disk_set_zoned to actually enable zoned device support.
For clearing it, call disk_clear_zoned, which is renamed from
disk_clear_zone_settings and now directly clears the zoned flag as
well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When zones were first added the SCSI and ATA specs, two different
models were supported (in addition to the drive managed one that
is invisible to the host):
- host managed where non-conventional zones there is strict requirement
to write at the write pointer, or else an error is returned
- host aware where a write point is maintained if writes always happen
at it, otherwise it is left in an under-defined state and the
sequential write preferred zones behave like conventional zones
(probably very badly performing ones, though)
Not surprisingly this lukewarm model didn't prove to be very useful and
was finally removed from the ZBC and SBC specs (NVMe never implemented
it). Due to to the easily disappearing write pointer host software
could never rely on the write pointer to actually be useful for say
recovery.
Fortunately only a few HDD prototypes shipped using this model which
never made it to mass production. Drop the support before it is too
late. Note that any such host aware prototype HDD can still be used
with Linux as we'll now treat it as a conventional HDD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
virtblk_revalidate_zones is called unconditionally from
virtblk_config_changed_work from the virtio config_changed callback.
virtblk_revalidate_zones is a bit odd in that it re-clears the zoned
state for host aware or non-zoned devices, which isn't needed unless the
zoned mode changed - but a zone mode change to a host managed model isn't
handled at all, and virtio_blk also doesn't handle any other config
change except for a capacity change is handled (and even if it was
the upper layers above virtio_blk wouldn't handle it very well).
But even the useful case of a size change that would add or remove
zones isn't handled properly as blk_revalidate_disk_zones expects the
device capacity to cover all zones, but the capacity is only updated
after virtblk_revalidate_zones.
As this code appears to be entirely untested and is getting in the way
remove it for now, but it can be readded in a fixed version with
proper test coverage if needed.
Fixes: 95bfec41bd ("virtio-blk: add support for zoned block devices")
Fixes: f1ba4e674f ("virtio-blk: fix to match virtio spec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move reading and checking the zoned model from virtblk_probe_zoned_device
into the caller, leaving only the code to perform the actual setup for
host managed zoned devices in virtblk_probe_zoned_device.
This allows to share the model reading and sharing between builds with
and without CONFIG_BLK_DEV_ZONED, and improve it for the
!CONFIG_BLK_DEV_ZONED case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231217165359.604246-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is error log when htab-mem benchmark completes. The error log
looks as follows:
$ ./bench htab-mem -d1
Setting up benchmark 'htab-mem'...
Benchmark 'htab-mem' started.
......
(cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2
Fix it by closing cgrp fd before invoking cleanup_cgroup_environment().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231219135727.2661527-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
Enhance BPF global subprogs with argument tags
This patch set adds verifier support for annotating user's global BPF subprog
arguments with few commonly requested annotations, to improve global subprog
verification experience.
These tags are:
- ability to annotate a special PTR_TO_CTX argument;
- ability to annotate a generic PTR_TO_MEM as non-null.
We utilize btf_decl_tag attribute for this and provide two helper macros as
part of bpf_helpers.h in libbpf (patch #8).
Besides this we also add abilit to pass a pointer to dynptr into global
subprog. This is done based on type name match (struct bpf_dynptr *). This
allows to pass dynptrs into global subprogs, for use cases that deal with
variable-sized generic memory pointers.
Big chunk of the patch set (patches #1 through #5) are various refactorings to
make verifier internals around global subprog validation logic easier to
extend and support long term, eliminating BTF parsing logic duplication,
factoring out argument expectation definitions from BTF parsing, etc.
New functionality is added in patch #6 (ctx and non-null) and patch #7
(dynptr), extending global subprog checks with awareness for arg tags.
Patch #9 adds simple tests validating each of the added tags and dynptr
argument passing.
Patch #10 adds a simple negative case for freplace programs to make sure that
target BPF programs with "unreliable" BTF func proto cannot be freplaced.
v2->v3:
- patch #10 improved by checking expected verifier error (Eduard);
v1->v2:
- dropped packet args for now (Eduard);
- added back unreliable=true detection for entry BPF programs (Eduard);
- improved subprog arg validation (Eduard);
- switched dynptr arg from tag to just type name based check (Eduard).
====================
Link: https://lore.kernel.org/r/20231215011334.2307144-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test validating that freplace'ing another main (entry) BPF program
fails if the target BPF program doesn't have valid/expected func proto BTF.
We extend fexit_bpf2bpf test to allow to specify expected log message
for negative test cases (where freplace program is expected to fail to
load).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a set of __arg_xxx macros which can be used to augment BPF global
subprogs/functions with extra information for use by BPF verifier.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ability to pass a pointer to dynptr into global functions.
This allows to have global subprogs that accept and work with generic
dynptrs that are created by caller. Dynptr argument is detected based on
the name of a struct type, if it's "bpf_dynptr", it's assumed to be
a proper dynptr pointer. Both actual struct and forward struct
declaration types are supported.
This is conceptually exactly the same semantics as
bpf_user_ringbuf_drain()'s use of dynptr to pass a variable-sized
pointer to ringbuf record. So we heavily rely on CONST_PTR_TO_DYNPTR
bits of already existing logic in the verifier.
During global subprog validation, we mark such CONST_PTR_TO_DYNPTR as
having LOCAL type, as that's the most unassuming type of dynptr and it
doesn't have any special helpers that can try to free or acquire extra
references (unlike skb, xdp, or ringbuf dynptr). So that seems like a safe
"choice" to make from correctness standpoint. It's still possible to
pass any type of dynptr to such subprog, though, because generic dynptr
helpers, like getting data/slice pointers, read/write memory copying
routines, dynptr adjustment and getter routines all work correctly with
any type of dynptr.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for annotating global BPF subprog arguments to provide more
information about expected semantics of the argument. Currently,
verifier relies purely on argument's BTF type information, and supports
three general use cases: scalar, pointer-to-context, and
pointer-to-fixed-size-memory.
Scalar and pointer-to-fixed-mem work well in practice and are quite
natural to use. But pointer-to-context is a bit problematic, as typical
BPF users don't realize that they need to use a special type name to
signal to verifier that argument is not just some pointer, but actually
a PTR_TO_CTX. Further, even if users do know which type to use, it is
limiting in situations where the same BPF program logic is used across
few different program types. Common case is kprobes, tracepoints, and
perf_event programs having a helper to send some data over BPF perf
buffer. bpf_perf_event_output() requires `ctx` argument, and so it's
quite cumbersome to share such global subprog across few BPF programs of
different types, necessitating extra static subprog that is context
type-agnostic.
Long story short, there is a need to go beyond types and allow users to
add hints to global subprog arguments to define expectations.
This patch adds such support for two initial special tags:
- pointer to context;
- non-null qualifier for generic pointer arguments.
All of the above came up in practice already and seem generally useful
additions. Non-null qualifier is an often requested feature, which
currently has to be worked around by having unnecessary NULL checks
inside subprogs even if we know that arguments are never NULL. Pointer
to context was discussed earlier.
As for implementation, we utilize btf_decl_tag attribute and set up an
"arg:xxx" convention to specify argument hint. As such:
- btf_decl_tag("arg:ctx") is a PTR_TO_CTX hint;
- btf_decl_tag("arg:nonnull") marks pointer argument as not allowed to
be NULL, making NULL check inside global subprog unnecessary.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231215011334.2307144-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>