Extract commands to set virtqueue coalescing parameters for reuse
by ethtool -Q, vq resize and netdim.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch separates the rx and tx global coalescing moderation
commands to support netdim switches in subsequent patches.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rx netdim needs to count the traffic during a complete napi process,
and start updating and comparing samples to make decisions after
the napi ends. Let virtqueue_napi_complete() return true if napi is done,
otherwise vice versa.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make arm_smmu_domain_add_master() not use the smmu_domain to detect the
s2cr configuration, instead pass it in as a parameter. It always returns
zero so make it return void.
Since it no longer really does anything to do with a domain call it
arm_smmu_master_install_s2crs().
This is done to make the next two patches able to re-use this code without
forcing the creation of a struct arm_smmu_domain.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-c86cc8c2230e+160bb-smmu_newapi_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Shannon Nelson says:
====================
ionic: updates to PCI error handling
These are improvements to our PCI error handling, including FLR and
AER events.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the pci_error_handlers error_detected and resume to be useful in
handling AER events. If the error detected is pci_channel_io_frozen we
set up to do an FLR at the end of the AER handling - this tends to clear
things up well enough that traffic can continue. Else, let the AER/PCI
machinery do what is needed for the less serious errors seen.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove and restore the lif's debugfs pointers on a reset,
and make sure to check for the dentry before removing it
in case an earlier reset failed to rebuild the lif.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When stopping the watchdog timer at remove time we should
be using the new timer_shutdown_sync to assure the timer
doesn't ever get rearmed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there was a failed attempt to reset the PCI connection,
don't later try to read from PCI as the space is unmapped
and will cause a paging request crash. When clearing the PCI
setup we can clear the dev_info register pointer, and check
it before using it in the fw_running test.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a reset fails, the PCI device is left in a disabled
state, so don't try to disable it again on driver remove.
This prevents a scary looking WARN trace in the kernel log.
ionic 0000:2b:00.0: disabling already-disabled device
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver or firmware is stuck in reset state, don't bother
trying to use adminq commands. This speeds up shutdown and
prevents unnecessary timeouts and error messages.
This includes a bit of rework on ionic_adminq_post_wait()
and ionic_adminq_post_wait_nomsg() to both use
__ionic_adminq_post_wait() which can do the checks needed in
both cases.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we keep and replay the filters and RSS config across
an FLR by using our FW_RESET flag. This gets checked on the
way down and on the way back up to help determine how much LIF
state to keep and restore across a reset action.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't rely on the PCI memory for the devcmd opcode because we
read a 0xff value if the PCI bus is broken, which can cause us
to report a bogus dev_cmd opcode later.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to use TESTL when checking the least-significant bit
with a TEST instruction. Use TESTB, which is three bytes shorter:
f6 05 00 00 00 00 01 testb $0x1,0x0(%rip)
vs:
f7 05 00 00 00 00 01 testl $0x1,0x0(%rip)
00 00 00
for the same effect.
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231109201032.4439-1-ubizjak@gmail.com
Currently this is exactly the same as ARM_SMMU_DOMAIN_S2, so just remove
it. The ongoing work to add nesting support through iommufd will do
something a little different.
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
The only caller is arm_smmu_install_ste_for_dev() which never has a NULL
master. Remove the confusing if.
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
Instead of passing a naked __le16 * around to represent a STE wrap it in a
"struct arm_smmu_ste" with an array of the correct size. This makes it
much clearer which functions will comprise the "STE API".
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
When we dynamically generate a name for a configuration in get-reg-list
we use strcat() to append to a buffer allocated using malloc() but we
never initialise that buffer. Since malloc() offers no guarantees
regarding the contents of the memory it returns this can lead to us
corrupting, and likely overflowing, the buffer:
vregs: PASS
vregs+pmu: PASS
sve: PASS
sve+pmu: PASS
vregs+pauth_address+pauth_generic: PASS
X?vr+gspauth_addre+spauth_generi+pmu: PASS
The bug is that strcat() should have been strcpy(), and that replacement
would be enough to fix it, but there are other things in the function
that leave something to be desired. In particular, an (incorrectly)
empty config would cause an out of bounds access to c->name[-1].
Since the strcpy() call relies on c->name[0..len-1] being initialized,
enforce that invariant throughout the function.
Fixes: 2f9ace5d45 ("KVM: arm64: selftests: get-reg-list: Introduce vcpu configs")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Co-developed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-Id: <20231211-kvm-get-reg-list-str-init-v3-1-6554c71c77b1@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a driver for the OmniVision OV64A40 image sensor.
Co-developed-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add bindings for OmniVision OV64A40.
Co-developed-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In addition to the existing 2592x1940 12-bit mode, introduce support
for 2592x1940 10-bit mode.
Following are the register set which control the 10/12 bit mode setting:
MDBIT 0x319d
ADBIT 0x3050
ADBIT1 0x341c
0x341d
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The V4L2_CID_HBLANK control is marked as readonly and can only be a
single value.
Set the minimum and maximum value to match the mode value.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Support reporting of the Sensor Native and Active pixel array areas
through the Selection API.
The implementation reports a single target crop only for the mode that
is presently exposed by the driver.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Provide support for enabling and disabling regulator supplies to control
power to the camera sensor.
While updating the power on function, document that a sleep is
represented as 'T4' in the datasheet power on sequence.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The existing imx335_parse_hw_config function has two paths
that can be taken without reporting to the user the reason
for failing to accept the hardware configuration.
Extend the error reporting paths to identify failures when
probing the device.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The use of \n as a line ending throughout the driver is inconsistent.
While it is possible for logging messages to automatically have newlines
added by the kernel printk mechanisms, this is specifically to support
continued lines with PR_CONT and the lack of a new line character
indicates that the text is a fragment of a continuation line.
As each of these lines are whole and not fragments, explicitly define the
newline for consistency.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add the bindings for the supply references used on the IMX335.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set effective and active sensor pixel sizes as shown in product
brief[1].
[1]: https://www.mouser.com/datasheet/2/897/ProductBrief_IMX214_20150428-1289331.pdf
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Obtain rotation and orientation information from system firmware and
register the appropriate controls. While at it, update number of
pre-allocated control slots.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Code refinement.
While at it, don't destroy the mutex not initialized yet if the controls
are initialized incorrectly.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Code refinement, no functional changes.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
[Sakari Ailus: The control handler remains in the context struct still.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Introduce new driver for GalaxyCore GC0308, which is a cheap
640x480 with an on-chip ISP sensor sold since 2010. Data is
provided via parallel bus.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
[Sakari Ailus: Changed MAINTAINERS to match GC2145 entry.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
"gc" prefixed i2c media drivers are most likely GalaxyCore camera
sensor drivers, so add it to the list.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add DT binding for GalaxyCore GC0308 camera sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The data lanes and link frequency were set to match existing Linux driver
limitations, however bindings should be independent of chosen Linux
driver support.
Decouple these properties from the driver to match what is actually
supported by the hardware.
This also fixes DTS example:
ov8856.example.dtb: camera@10: port:endpoint:link-frequencies:0: [360000000] is too short
Fixes: 066a94e28a ("media: dt-bindings: media: Use graph and video-interfaces schemas")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
LP-11 and LP-111 are CSI-2 bus states, not modes. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
BT.601 is not actually a bus specification, leaving parallel bus without a
specification to refer to. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Graciously handle an uninitialised (but still zeroed) sub-device in
v4l2_subdev_cleanup(). The list_empty() check there is unnecessary, too,
so replace that by cheking whether the lists's next field is NULL.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The only known devices that use an ov2740 sensor in combination with
the ipu-bridge code are various Lenovo ThinkPad models, which all
need the link-frequency to be 180 MHz for things to work properly.
The ov2740 driver used to only support 360 MHz link-frequency,
which is why the ipu-bridge entry used 360 MHz, but now the
ov2740 driver has been extended to also support 180 MHz.
The ov2740 is actually used with 360 MHz link-frequency on Chromebooks.
On Chromebooks the camera/sensor fwnode graph is part of the ACPI tables.
The ipu-bridge code is used to dynamically generate the graph when it is
missing, so it is not used on Chromebooks and the ov2740 will keep using
360 MHz link-frequency there as before.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Split the resetting of the sensor out of the link_freq_config reg_list
and add a delay after this.
This hopefully fixes the stream sometimes not starting, this was
taken from the ov2740 sensor driver in the out of tree IPU6 driver:
https://github.com/intel/ipu6-drivers/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On various Lenovo Thinkpad models with an ov2740 sensor the 360 MHz
link frequency is not supported.
Add support for 180 MHz link frequency, even though this has half the
pixel clock, this supports the same framerate by using half the VTS value
(significantly reducing the amount of empty lines send during vblank).
Normally if there are multiple link-frequencies then the sensor driver
choses the lowest link-frequency still usable for the chosen resolution.
In this case the board supports only 1 link-frequency. Which frequency
is supported is checked in ov2740_check_hwcfg() and then a different
set of supported_modes (using only the supported link-freq) is selected.
The register settings for this were taken from the ov2740 sensor driver
in the out of tree IPU6 driver:
https://github.com/intel/ipu6-drivers/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Alloc ov2740_data and set up the drvdata pointer before calling
ov2740_check_hwcfg().
This is a preparation patch to allow ov2740_check_hwcfg()
to store some of the parsed data in the ov2740 struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
HTS must be more then width, so the 1080 value clearly is wrong,
this is then corrected with some weird math dividing clocks in
to_pixels_per_line() which results in the hts getting multiplied by 2,
resulting in 2160.
Instead just directly set hts to the correct value of 2160 and
drop to_pixels_per_line().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Make ov2740_check_hwcfg() report an error on failure in all error paths,
so that it is always clear why the probe() failed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the bridge has not yet setup the fwnode-graph then
the fwnode_property_read_u32("clock-frequency") call will fail.
Move the fwnode_graph_get_next_endpoint() call to above reading
the clock-frequency.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various ThinkPad models with
IPU6 + ov2740 sensor, the sensor driver must control the reset GPIO
and the sensor's clock itself.
Add support for having the driver control an optional clock.
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
On some ACPI platforms, such as Chromebooks the ACPI methods to
change the power-state (_PS0 and _PS3) fully take care of powering
on/off the sensor.
On other ACPI platforms, such as e.g. various ThinkPad models with
IPU6 + ov2740 sensor, the sensor driver must control the reset GPIO
and the sensor's clock itself.
Add support for having the driver control an optional reset GPIO.
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The Alvium camera is shipped with sensor + isp in the same housing.
The camera can be equipped with one out of various sensor and abstract
the user from this. Camera is connected via MIPI CSI-2.
Most of the camera module features are supported, with the main exception
being fw update.
The driver provides all mandatory, optional and recommended V4L2 controls
for maximum compatibility with libcamera
References:
- https://www.alliedvision.com/en/products/embedded-vision-solutions
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Assign ret before using it in probe and squash Tommaso's
other fixes.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: alvium-csi2.h: SPDX must use /* */ instead of //]
Add documentation of device tree in YAML schema for the ALVIUM
Camera from Allied Vision Inc.
References:
- https://www.alliedvision.com/en/products/embedded-vision-solutions
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>