Callbacks advancing on SRCU must be performed on two specific places:
1) On enqueue time in order to make room for the acceleration of the
new callback.
2) On invocation time in order to move the callbacks ready to invoke.
Any other callback advancing callsite is needless. Remove the remaining
one in srcu_gp_start().
Co-developed-by: Yong He <zhuangel570@gmail.com>
Signed-off-by: Yong He <zhuangel570@gmail.com>
Co-developed-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Co-developed-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
The error variable in snapshot_write_next() gets a value before it is
used, so don't initialize it to 0 upfront.
Signed-off-by: Li zeming <zeming@nfschina.com>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'error' first receives the function result before it is used, and it
does not need to be assigned a value during definition.
Signed-off-by: Li zeming <zeming@nfschina.com>
[ rjw: Subject rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is not necessary to intialize the error variable in
create_basic_memory_bitmaps(), because it is only read after
being assigned a value.
Signed-off-by: Wang chaodong <chaodong@nfschina.com>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ulong2long, USHORT_CMP_GE and USHORT_CMP_LT are redundant and have been
unused for quite a few releases.
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Although the RCU CPU stall notifiers can be useful for dumping state when
tracking down delicate forward-progress bugs where NUMA effects cause
cache lines to be delivered to a given CPU regularly, but always in a
state that prevents that CPU from making forward progress. These bugs can
be detected by the RCU CPU stall-warning mechanism, but in some cases,
the stall-warnings printk()s disrupt the forward-progress bug before
any useful state can be obtained.
Unfortunately, the notifier mechanism added by commit 5b404fdaba ("rcu:
Add RCU CPU stall notifier") can make matters worse if used at all
carelessly. For example, if the stall warning was caused by a lock not
being released, then any attempt to acquire that lock in the notifier
will hang. This will prevent not only the notifier from producing any
useful output, but it will also prevent the stall-warning message from
ever appearing.
This commit therefore hides this new RCU CPU stall notifier
mechanism under a new RCU_CPU_STALL_NOTIFIER Kconfig option that
depends on both DEBUG_KERNEL and RCU_EXPERT. In addition, the
rcupdate.rcu_cpu_stall_notifiers=1 kernel boot parameter must also
be specified. The RCU_CPU_STALL_NOTIFIER Kconfig option's help text
contains a warning and explains the dangers of careless use, recommending
lockless notifier code. In addition, a WARN() is triggered each time
that an attempt is made to register a stall-warning notifier in kernels
built with CONFIG_RCU_CPU_STALL_NOTIFIER=y.
This combination of measures will keep use of this mechanism confined to
debug kernels and away from routine deployments.
[ paulmck: Apply Dan Carpenter feedback. ]
Fixes: 5b404fdaba ("rcu: Add RCU CPU stall notifier")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
The task_struct structure's ->rcu_tasks_idle_cpu can be concurrently
read and written from the RCU Tasks grace-period kthread and from the
CPU on which the task_struct structure's task is running. This commit
therefore marks the accesses appropriately.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
ip27-hubio.c:32: warning: Function parameter or member 'nasid' not described in 'hub_pio_map'
ip27-hubio.c:32: warning: Excess function parameter 'hub' description in 'hub_pio_map'
Fixes: 4bf841ebf1 ("MIPS: SGI-IP27: get rid of compact node ids")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202311101336.BUL1JuvU-lkp@intel.com
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Its been a while since I am making contributions to this architecture.
Hence add myself as maintainer.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add intel_idle support for MeteorLake.
C1 and C1E states on Meteorlake are mutually exclusive, like Alderlake
and Raptorlake, but they have little latency difference with measureable
power difference, so always enable "C1E promotion" bit and expose C1E
only.
Expose C6 because it has less power compared with C1E, and smaller
latency compared with C8/C10.
Ignore C8 and expose C10, because C8 does not show latency advantage
compared with C10.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make thermal_zone_device_unregister() wait until all of the references
to the given thermal zone object have been dropped and free it before
returning.
This guarantees that when thermal_zone_device_unregister() returns,
there is no leftover activity regarding the thermal zone in question
which is required by some of its callers (for instance, modular driver
code that wants to know when it is safe to let the module go away).
Subsequently, this will allow some confusing device_is_registered()
checks to be dropped from the thermal sysfs and core code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-and-tested-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add device tree bindings for HDC3020/HDC3021/HDC3022 humidity and
temperature sensors.
Signed-off-by: Li peiyu <579lpy@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231211123101.9868-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for HDC302x integrated capacitive based relative
humidity (RH) and temperature sensor.
This driver supports reading values, reading the maximum and
minimum of values and controlling the integrated heater of
the sensor.
Co-developed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Li peiyu <579lpy@gmail.com>
Link: https://lore.kernel.org/r/20231211122940.9791-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The in_temp_peak_raw attribute is already in use, but its documentation
is still missing. The in_humidityrelative_raw must be documented for a
new iio user that supports this attribute. Add temp and humidityrelative
use cases.
When at it, remove an extra blank space in the description.
For users that support minimum values, a new in_<type>_trough_raw
attribute is required. Add this attribute and document the first uses of
it for temp and humidityrelative types.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231211122840.9760-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The IIO_CHAN_INFO_PEAK info element is used for maximum values and
currently there is no equivalent for minimum values. Instead of
overloading the existing peak info element, a new info element can
be added.
In principle there is no need to add a _TROUGH_SCALE element as the
scale will be the same as the one required for INFO_PEAK, which in
turn is sometimes omitted if a single scale for peaks and raw values
is required.
Add an IIO_CHAN_INFO_TROUGH info element for minimum values.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231211122747.9723-1-579lpy@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add comment about intensity scale being poorly defined and
having no proper units.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231207134200.329174-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
MLX90635 is an Infra Red contactless temperature sensor most suitable
for consumer applications where measured object temperature is in range
between -20 to 100 degrees Celsius. It has improved accuracy for
measurements within temperature range of human body and can operate in
ambient temperature range between -20 to 85 degrees Celsius.
Driver provides simple power management possibility as it returns to
lowest possible power mode (Step sleep mode) in which temperature
measurements can still be performed, yet for continuous measuring it
switches to Continuous power mode where measurements constantly change
without triggering.
Signed-off-by: Crt Mori<cmo@melexis.com>
Link: https://lore.kernel.org/r/c6590e4fb8d993a5317b486a3e45e1bb6e9e3318.1701872051.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge series from Nam Cao <namcao@linutronix.de>:
The driver was refactored in 9b2ef250b3 ("spi: spl022: switch to use
default spi_transfer_one_message()"), and some variables are now unused
because of that. Clean them up.
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
Hello,
this series converts all drivers below drivers/regulator to struct
platform_driver::remove_new(). See commit 5c5a7680e6 ("platform:
Provide a remove callback that returns no value") for an extended
explanation and the eventual goal.
All conversations are trivial, because all .remove() callbacks returned
zero unconditionally.
There are no interdependencies between these patches, so they could be
picked up individually. However I'd expect them to go in all together
via Mark's regulator tree.
Best regards
Uwe
Uwe Kleine-König (8):
regulator: arizona-ldo1: Convert to platform remove callback returning
void
regulator: bd9571mwv: Convert to platform remove callback returning
void
regulator: db8500-prcmu: Convert to platform remove callback returning
void
regulator: stm32-vrefbuf: Convert to platform remove callback
returning void
regulator: uniphier: Convert to platform remove callback returning
void
regulator: userspace-consumer: Convert to platform remove callback
returning void
regulator: virtual: Convert to platform remove callback returning void
regulator: wm8350: Convert to platform remove callback returning void
drivers/regulator/arizona-ldo1.c | 8 +++-----
drivers/regulator/bd9571mwv-regulator.c | 5 ++---
drivers/regulator/db8500-prcmu.c | 6 ++----
drivers/regulator/stm32-vrefbuf.c | 6 ++----
drivers/regulator/uniphier-regulator.c | 6 ++----
drivers/regulator/userspace-consumer.c | 6 ++----
drivers/regulator/virtual.c | 6 ++----
drivers/regulator/wm8350-regulator.c | 6 ++----
8 files changed, 17 insertions(+), 32 deletions(-)
base-commit: 0f5f12ac05f36f117e793656c3f560625e927f1b
--
2.42.0
DDI0601 2023-09 defines a new sysrem register FPMR (Floating Point Mode
Register) which configures the new FP8 features. Add a definition of this
register.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-12-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines new fields in HCRX_EL2 controlling access to new
system registers, update our definition of HCRX_EL2 to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-11-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines some new fields in SCTLR_EL1 controlling new MTE
and floating point features. Update our sysreg definition to reflect these.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-10-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines a new feature register ID_AA64FPFR0_EL1 which
enumerates a number of FP8 related features. Add a definition for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-8-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 adds a new system register ID_AA64ISAR3_EL1 enumerating
new floating point and TLB invalidation features. Add a defintion for it.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-7-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines some new fields in previously RES0 space in
ID_AA64ISAR2_EL1, together with one new enum value. Update the system
register definition to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-6-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
DDI0601 2023-09 defines a new system register ID_AA64PFR2_EL1 which
enumerates FPMR and some new MTE features. Add a definition of this
register.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-5-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add E0POE bit that traps accesses to POR_EL0 from EL0.
Updated according to DDI0601 2023-03.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-4-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add POR_EL{0,1} according to DDI0601 2023-03.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-3-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The 2023-09 release of the architecture XML (DDI0601) adds a new field
ATS1E1A to HFGITR_EL2, update our definition of the register to match.
This was extracted from Faud Tabba's patch "KVM: arm64: Add latest
HFGITR_EL2 FGT entries to nested virt"
[Extracted the sysreg definition from Faud's original patch and reword
subject to match -- broonie]
Signed-off-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231206100503.564090-4-tabba@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231209-b4-arm64-sysreg-additions-v1-1-45284e538474@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Fix potential OOB in receive_encrypted_standard() if server returned a
large shdr->NextCommand that would end up writing off the end of
@next_buffer.
Fixes: b24df3e30c ("cifs: update receive_encrypted_standard to handle compounded responses")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't use all of this indirection which makes it really hard to follow
the code which is very basic. Error handling is also not really neede
here at all.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a way to query attributes of a single mount instead of having to parse
the complete /proc/$PID/mountinfo, which might be huge.
Lookup the mount the new 64bit mount ID. If a mount needs to be queried
based on path, then statx(2) can be used to first query the mount ID
belonging to the path.
Design is based on a suggestion by Linus:
"So I'd suggest something that is very much like "statfsat()", which gets
a buffer and a length, and returns an extended "struct statfs" *AND*
just a string description at the end."
The interface closely mimics that of statx.
Handle ASCII attributes by appending after the end of the structure (as per
above suggestion). Pointers to strings are stored in u64 members to make
the structure the same regardless of pointer size. Strings are nul
terminated.
Link: https://lore.kernel.org/all/CAHk-=wh5YifP7hzKSbwJj94+DZ2czjrZsczy6GBimiogZws=rg@mail.gmail.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-5-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
[Christian Brauner <brauner@kernel.org>: various minor changes]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a lockdep assert to pci_disable_link_state_locked() which should only
be called with a pci_bus_sem read lock held.
Link: https://lore.kernel.org/r/20231128081512.19387-7-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include function name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Replace the current 'sem' parameter to the __pci_disable_link_state()
helper with a more descriptive 'locked' parameter, which indicates whether
a pci_bus_sem read lock is already held.
Link: https://lore.kernel.org/r/20231128081512.19387-6-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include function name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Break up the newly added ASPM comment so that it fits within the soft 80
character limit and becomes more readable.
Link: https://lore.kernel.org/r/20231128081512.19387-5-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>