Commit graph

1,264,717 commits

Author SHA1 Message Date
Randy Dunlap
7bcd032370
platform/x86: intel_ips: fix kernel-doc formatting
Fix kernel-doc function notation and comment formatting to prevent
warnings from scripts/kernel-doc.

for drivers/platform/x86/intel_ips.c:
595: warning: No description found for return value of 'mcp_exceeded'
624: warning: No description found for return value of 'cpu_exceeded'
650: warning: No description found for return value of 'mch_exceeded'
745: warning: bad line:                 cpu+ gpu+       cpu+gpu-        cpu-gpu+        cpu-gpu-
746: warning: bad line: cpu < gpu <     cpu+gpu+        cpu+            gpu+            nothing
753: warning: No description found for return value of 'ips_adjust'
747: warning: bad line: cpu < gpu >=    cpu+gpu-(mcp<)  cpu+gpu-(mcp<)  gpu-            gpu-
748: warning: bad line: cpu >= gpu <    cpu-gpu+(mcp<)  cpu-            cpu-gpu+(mcp<)  cpu-
749: warning: bad line: cpu >= gpu >=   cpu-gpu-        cpu-gpu-        cpu-gpu-        cpu-gpu-
945: warning: No description found for return value of 'ips_monitor'
1151: warning: No description found for return value of 'ips_irq_handler'
1301: warning: Function parameter or member 'ips' not described in 'ips_detect_cpu'
1302: warning: No description found for return value of 'ips_detect_cpu'
1358: warning: No description found for return value of 'ips_get_i915_syms'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20231206060120.4816-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-08 13:21:49 +02:00
Andrzej Hajda
34880b1873
drm/i915/selftests: wait for active idle event in i915_active_unlock_wait
After i915_active_unlock_wait i915_active can be still non-idle due
to barrier async handling in signal_irq_work. As a result one can observe
following errors:
bcs0: heartbeat pulse did not flush idle tasks
*ERROR* pulse active pulse_active [i915]:pulse_retire [i915]
*ERROR* pulse    count: 0
*ERROR* pulse    preallocated barriers? no

To prevent it let's wait explicitly for idleness.

v2: wait only in live_idle tests

Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205-selftest_wait_for_active_idle_event-v2-1-1437d0bf9829@intel.com
2023-12-08 12:19:26 +01:00
Jiri Slaby (SUSE)
ae5af710f3 tty: xtensa/iss: use u8
Switch character types to u8. To conform to characters in the rest of
the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20231206073712.17776-28-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
b49d18493a tty: um: convert to u8/__u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Note we use __u8 in the userspace files.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Link: https://lore.kernel.org/r/20231206073712.17776-27-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
18977909bf tty: ttyprintk: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231206073712.17776-26-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
14abfd0cb5 tty: srmcons: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: linux-alpha@vger.kernel.org
Link: https://lore.kernel.org/r/20231206073712.17776-25-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
475fc6e2de tty: serdev: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

This patch converts struct serdev_device_ops hooks and its
instantiations.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
f2470d2bc4 tty: serdev: convert to u8 and size_t in serdev_controller_ops
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

In this patch, only struct serdev_controller_ops hooks. The rest will
follow.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-23-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
5c99e2977f tty: nozomi: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-22-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
5655b16ea5 tty: n_hdlc: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Note u8 is already both passed in and expected on output.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-21-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
eb7e45db2e tty: n_gsm: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-20-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
59b943356b tty: mxser: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-19-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
cb8566b9b3 tty: moxa: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:38 +01:00
Jiri Slaby (SUSE)
2573f7eac0 tty: mmc: sdio: use u8 for flag
Switch character types to u8. To conform to characters in the rest of
the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Link: https://lore.kernel.org/r/20231206073712.17776-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
ce7cbd9a6c tty: mips_ejtag_fdc: use u8 for character pointers
mips_ejtag_fdc_encode() and mips_ejtag_fdc_put_chan() declare arrays of
pointers to characters. Switch their types from char to u8 to conform
to the current tty layer types for characters.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
b7a43d0c87 tty: m68k: nfcon: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20231206073712.17776-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
2f98231327 tty: ipoctal: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: industrypack-devel@lists.sourceforge.net
Link: https://lore.kernel.org/r/20231206073712.17776-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
f32fcbedbe tty: hvc: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Amit Shah <amit@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux.dev
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20231206073712.17776-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
f3fb7367af tty: goldfish: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-12-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
0d08abb983 tty: ehv_bytechan: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231206073712.17776-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
e17934c1bc tty: con3270: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20231206073712.17776-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
359bbdc0cd tty: con3215: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20231206073712.17776-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
03e5af5257 tty: bcm: convert to u8 and size_t
Switch character types to u8 and sizes to size_t. To conform to
characters/sizes in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231206073712.17776-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
fbdeead959 tty: ami: use u8 for characters and flag
Switch character types to u8. To conform to characters in the rest of
the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20231206073712.17776-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
4e8d887814 tty: core: the rest to u8
There are still last minor users in the tty core that still reference
characters by the 'char' type. Switch them to u8.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
3a00da0279 tty: make tty_operations::send_xchar accept u8 char
tty_operations::send_xchar is one of the last users of 'char' type for
characters in the tty layer. Convert it to u8 now.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-bluetooth@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20231206073712.17776-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
49943393c9 tty: switch tty_port::xmit_* to u8
Both xmit_buf and xmit_fifo of struct tty_port should be u8. To conform
to characters in the rest of the tty layer.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
e93102bea4 tty: mmc: sdio_uart: switch sdio_in() to return u8
sdio_in() returns a value returned from sdio_readb(). The latter returns
u8. So should the former. Therefore, switch sdio_in() return type to u8
and all its callers too.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Link: https://lore.kernel.org/r/20231206073712.17776-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
e01b5712a8 tty: goldfish: use bool for is_write parameter
do_rw_io()'s is_write parameter is boolean, but typed int. Switch to the
former, so that it's obvious. (And the two users too.)

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231206073712.17776-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Stephan Gerhold
173ebdedcd serial: msm: Use OPP table for DVFS support
Parse the OPP table from the device tree and use dev_pm_opp_set_rate()
instead of clk_set_rate() to allow making performance state votes
specified in the OPP table (e.g. for power domains and interconnects).

Without an OPP table in the device tree this will behave just as before
this patch.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20231128-serial-msm-dvfs-v1-2-4f290d20a4be@kernkonzept.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Stephan Gerhold
692079bda7 dt-bindings: serial: qcom,msm-uartdm: Vote for shared resources
Document power-domains, operating-points-v2 and interconnects to allow
making performance state votes for certain clock frequencies of the UART
DM controller. The interconnect path to DRAM is needed when UART DM is
used together with a DMA engine.

Voting for these shared resources is necessary to guarantee performance
with power management enabled. Otherwise these resources might run at
minimal performance state which is not sufficient for certain UART
baud rates.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231128-serial-msm-dvfs-v1-1-4f290d20a4be@kernkonzept.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Christophe Leroy
1e7e56160d serial: ucc_uart: Fix multiple address space type errors
sparse reports multiple problems with address space type.

Most problems are linked to missing __iomem qualifier.

Others are caused by dereferencing __iomem addresses.

Fix all this by adding missing __iomem and using ioread32be().

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312050412.zN2PKArS-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/e49deeb079391ff7273ec32f5563df94cf70bc95.1701781976.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Ayan Kumar Halder
0ec058ece2 tty: hvc: dcc: Check for TXfull condition while setting up early console
Refer ARM DDI 0487I.a ID081822, D17.3.8, DBGDTRTX_EL0,
"If TXfull is set to 1, set DTRRX and DTRTX to UNKNOWN"

Thus one should always check for TXfull condition before hvc can be
used as an early console. This is similar to what is being done
today in hvc_dcc_console_init() and hvc_dcc_init().

The count 0x4000000 has been obtained from uboot (v2024.01-rc3)
drivers/serial/arm_dcc.c "TIMEOUT_COUNT".
It reads the dcc status and waits for 0x4000000  times for the TX Fifo
to be available before returning an error. Thus, it will prevent DCC
to be used as early console.

Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Link: https://lore.kernel.org/r/20231205123534.3376883-1-ayan.kumar.halder@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Heiko Stuebner
b18fefd230 dt-bindings: serial: snps-dw-apb-uart: include rs485 schema
The dw-apb-uart also can emulate rs485, so include the rs485
schema to allow validating rs485 properties.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201140542.323564-1-heiko@sntech.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Théo Lebrun
093258a996 tty: serial: amba: cleanup whitespace
Fix whitespace in include/linux/amba/serial.h to match current kernel
coding standards. Fixes about:

 - CHECK: spaces preferred around that '|' (ctx:VxV)
 - ERROR: code indent should use tabs where possible
 - WARNING: Unnecessary space before function pointer arguments
 - WARNING: please, no spaces at the start of a line

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231130-mbly-uart-v5-1-6566703a04b5@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Jiri Slaby (SUSE)
675bf8ef20 tty: virtio: drop virtio_cons_early_init()
The last user of virtio_cons_early_init() was dropped in commit
7fb2b2d512 ("s390/virtio: remove the old KVM virtio transport").

So now, drop virtio_cons_early_init() and the logic and headers behind
too.

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Amit Shah <amit@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: linux-alpha@vger.kernel.org
Cc: virtualization@lists.linux.dev
Link: https://lore.kernel.org/r/20231130113001.29154-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:37 +01:00
Paul Geurts
78d60dae9a serial: imx: fix tx statemachine deadlock
When using the serial port as RS485 port, the tx statemachine is used to
control the RTS pin to drive the RS485 transceiver TX_EN pin. When the
TTY port is closed in the middle of a transmission (for instance during
userland application crash), imx_uart_shutdown disables the interface
and disables the Transmission Complete interrupt. afer that,
imx_uart_stop_tx bails on an incomplete transmission, to be retriggered
by the TC interrupt. This interrupt is disabled and therefore the tx
statemachine never transitions out of SEND. The statemachine is in
deadlock now, and the TX_EN remains low, making the interface useless.

imx_uart_stop_tx now checks for incomplete transmission AND whether TC
interrupts are enabled before bailing to be retriggered. This makes sure
the state machine handling is reached, and is properly set to
WAIT_AFTER_SEND.

Fixes: cb1a609236 ("serial: imx: implement rts delaying for rs485")
Signed-off-by: Paul Geurts <paul_geurts@live.nl>
Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Eberhard Stoll <eberhard.stoll@gmx.de>
Link: https://lore.kernel.org/r/AM0PR09MB26758F651BC1B742EB45775995B8A@AM0PR09MB2675.eurprd09.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08 12:02:36 +01:00
Randy Dunlap
17fe3ec0c1
platform/x86: thinkpad_acpi: fix kernel-doc warnings
Add a function's return description and don't misuse "/**" for
non-kernel-doc comments to prevent warnings from scripts/kernel-doc.

thinkpad_acpi.c:523: warning: No description found for return value of 'tpacpi_check_quirks'
thinkpad_acpi.c:9307: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
thinkpad_acpi.c:9307: warning: missing initial short description on line:
 * This evaluates a ACPI method call specific to the battery

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
CC: ibm-acpi-devel@lists.sourceforge.net
CC: platform-driver-x86@vger.kernel.org
Reviewed-by: mpearson-lenovo@squebb.ca
Link: https://lore.kernel.org/r/20231206060144.8260-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-08 13:02:24 +02:00
David S. Miller
6b4756beb1 Merge branch 'ethtool_puts'
Justin Stitt says:

====================
ethtool: Add ethtool_puts()

This series aims to implement ethtool_puts() and send out a wave 1 of
conversions from ethtool_sprintf(). There's also a checkpatch patch
included to check for the cases listed below.

This was sparked from recent discussion here [1]

The conversions are used in cases where ethtool_sprintf() was being used
with just two arguments:
|       ethtool_sprintf(&data, buffer[i].name);
or when it's used with format string: "%s"
|       ethtool_sprintf(&data, "%s", buffer[i].name);
which both now become:
|       ethtool_puts(&data, buffer[i].name);

The first case commonly triggers a -Wformat-security warning with Clang
due to potential problems with format flags present in the strings [3].

The second is just a bit weird with a plain-ol' "%s".

Changes found with Cocci [4] and grep [5].

[1]: https://lore.kernel.org/all/202310141935.B326C9E@keescook/
[2]: https://lore.kernel.org/all/?q=dfb%3Aethtool_sprintf+AND+f%3Ajustinstitt
[3]: https://lore.kernel.org/all/202310101528.9496539BE@keescook/
[4]: (script authored by Kees w/ modifications from Joe)
@replace_2_args@
expression BUF;
expression VAR;
@@

-       ethtool_sprintf(BUF, VAR)
+       ethtool_puts(BUF, VAR)

@replace_3_args@
expression BUF;
expression VAR;
@@

-       ethtool_sprintf(BUF, "%s", VAR)
+       ethtool_puts(BUF, VAR)

-       ethtool_sprintf(&BUF, "%s", VAR)
+       ethtool_puts(&BUF, VAR)

[5]: $ rg "ethtool_sprintf\(\s*[^,)]+\s*,\s*[^,)]+\s*\)"

Signed-off-by: Justin Stitt <justinstitt@google.com>
---
Changes in v5:
- updated documentation to include info about the lack of a trailing newline
  (Thanks Russell)
- rebased onto mainline
- Link to v4: https://lore.kernel.org/r/20231102-ethtool_puts_impl-v4-0-14e1e9278496@google.com

Changes in v4:
- update documentation to match:
  https://lore.kernel.org/all/20231028192511.100001-1-andrew@lunn.ch/

- Link to v3: https://lore.kernel.org/r/20231027-ethtool_puts_impl-v3-0-3466ac679304@google.com

Changes in v3:
- fix force_speed_maps merge conflict + formatting (thanks Vladimir)
- rebase onto net-next (thanks Andrew, Vladimir)
- change subject (thanks Vladimir)
- fix checkpatch formatting + implementation (thanks Joe)
- Link to v2: https://lore.kernel.org/r/20231026-ethtool_puts_impl-v2-0-0d67cbdd0538@google.com

Changes in v2:
- wrap lines better in replacement (thanks Joe, Kees)
- add --fix to checkpatch (thanks Joe)
- clean up checkpatch formatting (thanks Joe, et al.)
- rebase against next
- Link to v1: https://lore.kernel.org/r/20231025-ethtool_puts_impl-v1-0-6a53a93d3b72@google.com
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08 10:56:26 +00:00
Hans de Goede
14c200b7ca
platform/x86: intel-vbtn: Fix missing tablet-mode-switch events
2 issues have been reported on the Dell Inspiron 7352:

1. Sometimes the tablet-mode-switch stops reporting tablet-mode
   change events.

   Add a "VBDL" call to notify_handler() to work around this.

2. Sometimes the tablet-mode is incorrect after suspend/resume

   Add a detect_tablet_mode() to resume() to fix this.

Reported-by: Arnold Gozum <arngozum@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/87271a74-c831-4eec-b7a4-1371d0e42471@gmail.com/
Tested-by: Arnold Gozum <arngozum@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20231204150601.46976-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-08 12:56:26 +02:00
justinstitt@google.com
e403cffff1 net: Convert some ethtool_sprintf() to ethtool_puts()
This patch converts some basic cases of ethtool_sprintf() to
ethtool_puts().

The conversions are used in cases where ethtool_sprintf() was being used
with just two arguments:
|       ethtool_sprintf(&data, buffer[i].name);
or when it's used with format string: "%s"
|       ethtool_sprintf(&data, "%s", buffer[i].name);
which both now become:
|       ethtool_puts(&data, buffer[i].name);

Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08 10:56:25 +00:00
justinstitt@google.com
9b5f621cea checkpatch: add ethtool_sprintf rules
Add some warnings for using ethtool_sprintf() where a simple
ethtool_puts() would suffice.

The two cases are:

1) Use ethtool_sprintf() with just two arguments:
|       ethtool_sprintf(&data, driver[i].name);
or
2) Use ethtool_sprintf() with a standalone "%s" fmt string:
|       ethtool_sprintf(&data, "%s", driver[i].name);

The former may cause -Wformat-security warnings while the latter is just
not preferred. Both are safely in the category of warnings, not errors.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08 10:56:25 +00:00
justinstitt@google.com
2a48c635fd ethtool: Implement ethtool_puts()
Use strscpy() to implement ethtool_puts().

Functionally the same as ethtool_sprintf() when it's used with two
arguments or with just "%s" format specifier.

Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Madhuri Sripada <madhuri.sripada@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08 10:56:25 +00:00
Maciej Żenczykowski
bd4a816752 net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX
Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.

We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.

We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.

This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.

Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08 10:40:51 +00:00
Judy Hsiao
e5dc5afff6 neighbour: Don't let neigh_forced_gc() disable preemption for long
We are seeing cases where neigh_cleanup_and_release() is called by
neigh_forced_gc() many times in a row with preemption turned off.
When running on a low powered CPU at a low CPU frequency, this has
been measured to keep preemption off for ~10 ms. That's not great on a
system with HZ=1000 which expects tasks to be able to schedule in
with ~1ms latency.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08 10:37:43 +00:00
David S. Miller
179a8b515e mlx5-fixes-2023-12-04
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmVuvyoACgkQSD+KveBX
 +j4Dagf/V2GHaRgEx7QLopSAZHSrINM43Ks8skWeWTN9m6gznv6Pp2CHj22E/4xI
 JktJicbtGbjMg1SYzAoTv8woGPDMjz+Y4CMSUBHOiqS5fcEN9UvxPNfswhJlx5w9
 ALidUw97LzdkDuiQoNeAHaV1gwh/c/07vLUD+7YLL7e4z1a47ps/9Ejqx5/zBzaA
 LUPmkd/mfxMp33BHQpHfItl/BRJCcvZOMSZAanf+G5J/V7N54JATtxTfgFs4vD68
 B/FjsgI2HGHk+qeyE2PJLSfGqHsfOlipI+p1WlPpzuTwhUVis32SvutBF9XuvtZV
 4kqlxGjvvVanEa4Ps7jlb3xKC31Y3A==
 =2z8u
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-fixes-2023-12-04' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2023-12-04

This series provides bug fixes to mlx5 driver.

V1->V2:
  - Drop commit #9 ("net/mlx5e: Forbid devlink reload if IPSec rules are
    offloaded"), we are working on a better fix

Please pull and let me know if there is any problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-08 10:30:34 +00:00
Dan Carpenter
fca9448ae2
drm/imagination: Move dereference after NULL check in pvr_mmu_backing_page_init()
This code dereferences "page->pvr_dev" and then checked for NULL on the
next line.  Re-order it to avoid a potential NULL pointer dereference.

Fixes: ff5f643de0 ("drm/imagination: Add GEM and VM related code")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/13f4278e-af9c-4092-9196-bc0e6b76f1eb@moroto.mountain
2023-12-08 10:25:24 +01:00
Yang Li
b84135e7a5
drm/imagination: Remove unneeded semicolon
./drivers/gpu/drm/imagination/pvr_fw_trace.c:251:2-3: Unneeded semicolon

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7694
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208003034.68339-1-yang.lee@linux.alibaba.com
2023-12-08 10:25:06 +01:00
Dmitry Baryshkov
aa8ec5d7b2
drm/vkms: move wb's atomic_check from encoder to connector
As the renamed drm_atomic_helper_check_wb_connector_state() now accepts
drm_writeback_connector as the first argument (instead of drm_encoder),
move the VKMS writeback atomic_check from drm_encoder_helper_funcs to
drm_connector_helper_funcs. Also drop the vkms_wb_encoder_helper_funcs,
which have become empty now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208010314.3395904-3-dmitry.baryshkov@linaro.org
2023-12-08 10:24:30 +01:00
Dmitry Baryshkov
66f011145b
drm/atomic-helper: rename drm_atomic_helper_check_wb_encoder_state
The drm_atomic_helper_check_wb_encoder_state() function doesn't use
encoder for anything other than getting the drm_device instance. The
function's description talks about checking the writeback connector
state, not the encoder state. Moreover, there is no such thing as an
encoder state, encoders generally do not have a state on their own.

Rename the function to drm_atomic_helper_check_wb_connector_state()
and change arguments to drm_writeback_connector and drm_atomic_state.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208010314.3395904-2-dmitry.baryshkov@linaro.org
2023-12-08 10:24:27 +01:00