Microchip KSZ8863/KSZ8873 have the ability to select between internal
and external RMII reference clock. By default, reference clock
needs to be provided via REFCLKI_3 pin. If required, device can be
setup to provide RMII clock internally so that REFCLKI_3 pin can be
left unconnected.
Add a new "microchip,rmii-clk-internal" property which will set
RMII clock reference to internal. If property is not set, reference
clock needs to be provided externally.
While at it, move the ksz8795_cpu_interface_select() to
ksz8_config_cpu_port() to get a cleaner call path for cpu port.
Signed-off-by: Ante Knezic <ante.knezic@helmholz.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation for selecting reference rmii clock on KSZ88X3 devices
Signed-off-by: Ante Knezic <ante.knezic@helmholz.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The neighbour event callback call the function nfp_tun_write_neigh,
this function will take a mutex lock and it is in soft irq context,
change the work queue to process the neighbour event.
Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock()
in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6.
Fixes: abc210952a ("nfp: flower: tunnel neigh support bond offload")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang-struct [1] found that ee_antenna in struct ath5k_eeprom_info is
unused. The commit 1048643ea9 ("ath5k: Clean up eeprom
parsing and add missing calibration data") added it, but did not use it
in any way. Neither, there is a later user.
So remove that unused member.
[1] https://github.com/jirislaby/clang-struct
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231205111515.21470-1-jirislaby@kernel.org
Broadcast action frames are needed for the Device Provisioning
Protocol (DPP) for Presence and PKEX Exchange requests. Currently
just ath9k has this capability so this is being enabled for
ath10k (for at least one hardware variant).
Add a new capability flag in ath10k_hw_params to indicate support
for receiving multicast action frames. This bit is then checked
when configuring the RX filter and (if set) multicast action frame
registration is enabled.
Until more hardware can be tested only the "qca6174 hw3.2" variant
is enabling this feature.
Note: I went ahead and removed the 'changed_flags' mask operation
since it had no effect, that parameter was not being used anywhere.
Tested-on: QCA6174 hw3.2 WLAN.RM.4.4.1-00288-
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231116173246.40458-1-prestwoj@gmail.com
The uncore code may not always be available (e.g. when we build the
display code with Xe), so we can't always rely on having the uncore's
spinlock.
To handle this, split the spin_lock/unlock_irqsave/restore() into
spin_lock/unlock() followed by a call to local_irq_save/restore() and
create wrapper functions for locking and unlocking the uncore's
spinlock. In these functions, we have a condition check and only
actually try to lock/unlock the spinlock when I915 is defined, and
thus uncore is available.
This keeps the ifdefs contained in these new functions and all such
logic inside the display code.
Cc: Tvrtko Ursulin <tvrto.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201100032.1367589-1-luciano.coelho@intel.com
The pin control header provides struct pingroup and PINCTRL_PINGROUP() macro.
Utilize them instead of open coded variants in the driver.
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231204160033.1872569-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's unclear why it's not a const unsigned int pointer from day 1.
Make the pins member const unsigned int pointer in struct group_desc.
Update necessary APIs.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231204160033.1872569-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We are not going to change pins in the ->set_mux() callback. Mark
the local variable with a const qualifier. While at it, make it
also unsigned.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231204160033.1872569-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move xfs_ondisk.h to libxfs so that we can do the struct sanity checks
in userspace libxfs as well. This should allow us to retire the
somewhat fragile xfs/122 test on xfstests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use the compiler-provided static_assert built-in from C11 instead of
the kernel-specific BUILD_BUG_ON_MSG for the structure size and offset
checks in xfs_ondisk. This not only gives slightly nicer error messages
in case things go south, but can also be trivially used as-is in
userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This patch does not modify logic.
xfs_da_buf_copy() will copy one block from src xfs_buf to
dst xfs_buf, and update the block metadata in dst directly.
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_da3_swap_lastblock() copy the last block content to the dead block,
but do not update the metadata in it. We need update some metadata
for some kinds of type block, such as dir3 leafn block records its
blkno, we shall update it to the dead block blkno. Otherwise,
before write the xfs_buf to disk, the verify_write() will fail in
blk_hdr->blkno != xfs_buf->b_bn, then xfs will be shutdown.
We will get this warning:
XFS (dm-0): Metadata corruption detected at xfs_dir3_leaf_verify+0xa8/0xe0 [xfs], xfs_dir3_leafn block 0x178
XFS (dm-0): Unmount and run xfs_repair
XFS (dm-0): First 128 bytes of corrupted metadata buffer:
00000000e80f1917: 00 80 00 0b 00 80 00 07 3d ff 00 00 00 00 00 00 ........=.......
000000009604c005: 00 00 00 00 00 00 01 a0 00 00 00 00 00 00 00 00 ................
000000006b6fb2bf: e4 44 e3 97 b5 64 44 41 8b 84 60 0e 50 43 d9 bf .D...dDA..`.PC..
00000000678978a2: 00 00 00 00 00 00 00 83 01 73 00 93 00 00 00 00 .........s......
00000000b28b247c: 99 29 1d 38 00 00 00 00 99 29 1d 40 00 00 00 00 .).8.....).@....
000000002b2a662c: 99 29 1d 48 00 00 00 00 99 49 11 00 00 00 00 00 .).H.....I......
00000000ea2ffbb8: 99 49 11 08 00 00 45 25 99 49 11 10 00 00 48 fe .I....E%.I....H.
0000000069e86440: 99 49 11 18 00 00 4c 6b 99 49 11 20 00 00 4d 97 .I....Lk.I. ..M.
XFS (dm-0): xfs_do_force_shutdown(0x8) called from line 1423 of file fs/xfs/xfs_buf.c. Return address = 00000000c0ff63c1
XFS (dm-0): Corruption of in-memory data detected. Shutting down filesystem
XFS (dm-0): Please umount the filesystem and rectify the problem(s)
>From the log above, we know xfs_buf->b_no is 0x178, but the block's hdr record
its blkno is 0x1a0.
Fixes: 24df33b45e ("xfs: add CRC checking to dir2 leaf blocks")
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the case of returning -ENOSPC, ensure logflagsp is initialized by 0.
Otherwise the caller __xfs_bunmapi will set uninitialized illegal
tmp_logflags value into xfs log, which might cause unpredictable error
in the log recovery procedure.
Also, remove the flags variable and set the *logflagsp directly, so that
the code should be more robust in the long run.
Fixes: 1b24b633aa ("xfs: move some more code into xfs_bmap_del_extent_real")
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use struct types instead of typedefs so that the header can be included
with pulling in the headers that define the typedefs, and remove the
pointless externs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_reserve_blocks has a very odd interface that can only be explained
by it directly deriving from the IRIX fcntl handler back in the day.
Split reporting out the reserved blocks out of xfs_reserve_blocks into
the only caller that cares. This means that the value reported from
XFS_IOC_SET_RESBLKS isn't atomically sampled in the same critical
section as when it was set anymore, but as the values could change
right after setting them anyway that does not matter. It does
provide atomic sampling of both values for XFS_IOC_GET_RESBLKS now,
though.
Also pass a normal scalar integer value for the requested value instead
of the pointless pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Split XFS_IOC_FSCOUNTS out of the main xfs_file_ioctl function, and
merge the xfs_fs_counts helper into the ioctl handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The XFS_IOC_GET_RESBLKS and XFS_IOC_SET_RESBLKS already share a fair
amount of code, and will share even more soon. Move the logic for both
of them out of the main xfs_file_ioctl function into a
xfs_ioctl_getset_resblocks helper to share the code and prepare for
additional changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
XFS docs are currently in upper-level Documentation/filesystems.
Although these are currently 4 docs, they are already outstanding as
a group and can be moved to its own subdirectory.
Consolidate them into Documentation/filesystems/xfs/.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Now, if we suddenly remove a PMEM device(by calling unbind) which
contains FSDAX while programs are still accessing data in this device,
e.g.:
```
$FSSTRESS_PROG -d $SCRATCH_MNT -n 99999 -p 4 &
# $FSX_PROG -N 1000000 -o 8192 -l 500000 $SCRATCH_MNT/t001 &
echo "pfn1.1" > /sys/bus/nd/drivers/nd_pmem/unbind
```
it could come into an unacceptable state:
1. device has gone but mount point still exists, and umount will fail
with "target is busy"
2. programs will hang and cannot be killed
3. may crash with NULL pointer dereference
To fix this, we introduce a MF_MEM_PRE_REMOVE flag to let it know that we
are going to remove the whole device, and make sure all related processes
could be notified so that they could end up gracefully.
This patch is inspired by Dan's "mm, dax, pmem: Introduce
dev_pagemap_failure()"[1]. With the help of dax_holder and
->notify_failure() mechanism, the pmem driver is able to ask filesystem
on it to unmap all files in use, and notify processes who are using
those files.
Call trace:
trigger unbind
-> unbind_store()
-> ... (skip)
-> devres_release_all()
-> kill_dax()
-> dax_holder_notify_failure(dax_dev, 0, U64_MAX, MF_MEM_PRE_REMOVE)
-> xfs_dax_notify_failure()
`-> freeze_super() // freeze (kernel call)
`-> do xfs rmap
` -> mf_dax_kill_procs()
` -> collect_procs_fsdax() // all associated processes
` -> unmap_and_kill()
` -> invalidate_inode_pages2_range() // drop file's cache
`-> thaw_super() // thaw (both kernel & user call)
Introduce MF_MEM_PRE_REMOVE to let filesystem know this is a remove
event. Use the exclusive freeze/thaw[2] to lock the filesystem to prevent
new dax mapping from being created. Do not shutdown filesystem directly
if configuration is not supported, or if failure range includes metadata
area. Make sure all files and processes(not only the current progress)
are handled correctly. Also drop the cache of associated files before
pmem is removed.
[1]: https://lore.kernel.org/linux-mm/161604050314.1463742.14151665140035795571.stgit@dwillia2-desk3.amr.corp.intel.com/
[2]: https://lore.kernel.org/linux-xfs/169116275623.3187159.16862410128731457358.stg-ugh@frogsfrogsfrogs/
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
To accommodate for legacy devices, we rely on the last state of a
transition to be valid:
for example when we test PEN_IS_OUT_OF_RANGE to PEN_IS_IN_CONTACT,
any "normal" device that reports an InRange bit would insert a
PEN_IS_IN_RANGE state between the 2.
This is of course valid, but this solution prevents to detect false
releases emitted by some firmware:
when pressing an "eraser mode" button, they might send an extra
PEN_IS_OUT_OF_RANGE that we may want to filter.
So define 2 sets of transitions: one that is the ideal behavior, and
one that is OK, it won't break user space, but we have serious doubts
if we are doing the right thing. And depending on the test, either
ask only for valid transitions, or tolerate weird ones.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-13-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Some tablets report 2 barrel switches. We better test those too.
Use the same transistions description from the primary button tests.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-12-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We get more descriptive in what we are doing, and also get more
information of what is actually being tested. Instead of having a non
exhaustive button changes that are semi-randomly done, we can describe
all the states we want to test.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-11-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Turns out that there are transitions that are unlikely to happen:
for example, having both the tip switch and a button being changed
at the same time (in the same report) would require either a very talented
and precise user or a very bad hardware with a very low sampling rate.
So instead of manually building the button test by hand and forgetting
about some cases, let's reuse the state machine and transitions we have.
This patch only adds the states and the valid transitions. The actual
tests will be replaced later.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-10-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We can easily subclass PenDigitizer for introducing firmware bugs when
subclassing Pen is harder.
Move move_to from Pen to PenDigitizer so we get that ability
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-6-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Those transitions have nothing to do with `Pen`, so migrate them to
`PenState`.
The hidden agenda is to remove `Pen` and integrate it into `PenDigitizer`
so that we can tweak the events in each state to emulate firmware bugs.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-5-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
vmtest.sh works great for a one shot test, but not so much for CI where
I want to build (with different configs) the bzImage in a separate
job than the one I am running it.
Add a "build_only" option to specify whether we need to boot the currently
built kernel in the vm.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-2-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
boot2container is now on an official project, so let's use that.
The container image is now the same I use for the CI, so let's keep
to it.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-1-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Online repair fixes metadata structures by writing a new copy out to
disk and atomically committing the new structure into the filesystem.
For this to work, we need to reserve all the space we're going to need
ahead of time so that the atomic commit transaction is as small as
possible. We also require the reserved space to be freed if the system
goes down, or if we decide not to commit the repair, or if we reserve
too much space.
To keep the atomic commit transaction as small as possible, we would
like to allocate some space and simultaneously schedule automatic
reaping of the reserved space, even on log recovery. EFIs are the
mechanism to get us there, but we need to use them in a novel manner.
Once we allocate the space, we want to hold on to the EFI (relogging as
necessary) until we can commit or cancel the repair. EFIs for written
committed blocks need to go away, but unwritten or uncommitted blocks
can be freed like normal.
Earlier versions of this patchset directly manipulated the log items,
but Dave thought that to be a layering violation. For v27, I've
modified the defer ops handling code to be capable of pausing a deferred
work item. Log intent items are created as they always have been, but
paused items are pushed onto a side list when finishing deferred work
items, and pushed back onto the transaction after that. Log intent done
item are not created for paused work.
The second part adds a "stale" flag to the EFI so that the repair
reservation code can dispose of an EFI the normal way, but without the
space actually being freed.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXEx4wAKCRBKO3ySh0YR
phIZAQCeUpGo77FqSuvgbXOcePgdsrKqSrhCYNxXQqbmTnX6BQEA09ir+SHoWKDy
cvYZ2AEgllh8zJKJsXYi0YO6Y7qj6gQ=
=FuaR
-----END PGP SIGNATURE-----
Merge tag 'repair-auto-reap-space-reservations-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeA
xfs: reserve disk space for online repairs
Online repair fixes metadata structures by writing a new copy out to
disk and atomically committing the new structure into the filesystem.
For this to work, we need to reserve all the space we're going to need
ahead of time so that the atomic commit transaction is as small as
possible. We also require the reserved space to be freed if the system
goes down, or if we decide not to commit the repair, or if we reserve
too much space.
To keep the atomic commit transaction as small as possible, we would
like to allocate some space and simultaneously schedule automatic
reaping of the reserved space, even on log recovery. EFIs are the
mechanism to get us there, but we need to use them in a novel manner.
Once we allocate the space, we want to hold on to the EFI (relogging as
necessary) until we can commit or cancel the repair. EFIs for written
committed blocks need to go away, but unwritten or uncommitted blocks
can be freed like normal.
Earlier versions of this patchset directly manipulated the log items,
but Dave thought that to be a layering violation. For v27, I've
modified the defer ops handling code to be capable of pausing a deferred
work item. Log intent items are created as they always have been, but
paused items are pushed onto a side list when finishing deferred work
items, and pushed back onto the transaction after that. Log intent done
item are not created for paused work.
The second part adds a "stale" flag to the EFI so that the repair
reservation code can dispose of an EFI the normal way, but without the
space actually being freed.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-auto-reap-space-reservations-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: force small EFIs for reaping btree extents
xfs: log EFIs for all btree blocks being used to stage a btree
xfs: implement block reservation accounting for btrees we're staging
xfs: remove unused fields from struct xbtree_ifakeroot
xfs: automatic freeing of freshly allocated unwritten space
xfs: remove __xfs_free_extent_later
xfs: allow pausing of pending deferred work items
xfs: don't append work items to logged xfs_defer_pending objects
Prevent scrub from live locking in xchk_iget if there's a cycle in the
inobt by allocating an empty transaction.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXEx4wAKCRBKO3ySh0YR
phrFAP4mjHlCNpZZlz4xwNMBKypY7Rbm1BY9CJgR8036UYYNPgEAkUgrzbN/LIVc
hgvrcfksJ5ogoemkvd2E+GRvr8EMBAg=
=9yso
-----END PGP SIGNATURE-----
Merge tag 'scrub-livelock-prevention-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeA
xfs: prevent livelocks in xchk_iget
Prevent scrub from live locking in xchk_iget if there's a cycle in the
inobt by allocating an empty transaction.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'scrub-livelock-prevention-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: make xchk_iget safer in the presence of corrupt inode btrees
Christoph pointed out that the defer ops machinery doesn't need to call
->create_done if the deferred work item didn't generate a log intent
item in the first place. Let's clean that up and save an indirect call
in the non-logged xattr update call path.
v2: pick up rvb tags
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXEx4wAKCRBKO3ySh0YR
pjCsAP4z+FUZUEtxd2T32hITEsoEdNksZ5MgPJN0P1lfwoUuzgD9H4HQPQIgbsoY
3aJl/vWE9Nat8jMf+BoujAq2Ns3t7AQ=
=Nlvg
-----END PGP SIGNATURE-----
Merge tag 'defer-elide-create-done-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeA
xfs: elide defer work ->create_done if no intent
Christoph pointed out that the defer ops machinery doesn't need to call
->create_done if the deferred work item didn't generate a log intent
item in the first place. Let's clean that up and save an indirect call
in the non-logged xattr update call path.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'defer-elide-create-done-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: elide ->create_done calls for unlogged deferred work
xfs: document what LARP means
While reading through the realtime geometry support code in xfsprogs, I
noticed a discrepancy between the sb_rextslog computation used when
writing out the superblock during mkfs and the validation code used in
xfs_repair. This discrepancy would lead to system failure for a runt rt
volume having more than 1 rt block but zero rt extents in length. Most
people aren't going to configure a 1M extent size for their 360k rt
floppy disk volume, but I did!
In the process of studying that code, it occurred to me that there is a
second bug in the computation -- the use of highbit32 for a 64-bit
value means that the upper 32 bits are not considered in the search for
a high bit. This causes the creation of a realtime summary file that is
the wrong length. If rextents is a multiple of U32_MAX then this will
appear to work fine because highbit32 returns -1 for an input of 0; but
for all other cases the rt summary is undersized, leading to failures.
Fix the first problem by standardizing the computation with a helper in
libxfs; and the second problem by correcting the computation. This will
cause any existing rt volumes larger than 2^32 blocks to fail validation
but they probably were already crashing anyway.
v2: pick up review tags
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXEx4wAKCRBKO3ySh0YR
prfnAQDVz4i7wygrSGFefrlRwum7OcfjnEO1DMbGmtRK70o9LAEA3qX57rLGwevB
iltpNB7QGdi5LuCvn2eR608gMBDY6wg=
=DszP
-----END PGP SIGNATURE-----
Merge tag 'fix-rtmount-overflows-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeA
xfs: fix realtime geometry integer overflows
While reading through the realtime geometry support code in xfsprogs, I
noticed a discrepancy between the sb_rextslog computation used when
writing out the superblock during mkfs and the validation code used in
xfs_repair. This discrepancy would lead to system failure for a runt rt
volume having more than 1 rt block but zero rt extents in length. Most
people aren't going to configure a 1M extent size for their 360k rt
floppy disk volume, but I did!
In the process of studying that code, it occurred to me that there is a
second bug in the computation -- the use of highbit32 for a 64-bit
value means that the upper 32 bits are not considered in the search for
a high bit. This causes the creation of a realtime summary file that is
the wrong length. If rextents is a multiple of U32_MAX then this will
appear to work fine because highbit32 returns -1 for an input of 0; but
for all other cases the rt summary is undersized, leading to failures.
Fix the first problem by standardizing the computation with a helper in
libxfs; and the second problem by correcting the computation. This will
cause any existing rt volumes larger than 2^32 blocks to fail validation
but they probably were already crashing anyway.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'fix-rtmount-overflows-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: don't allow overly small or large realtime volumes
xfs: fix 32-bit truncation in xfs_compute_rextslog
xfs: make rextslog computation consistent with mkfs
Add yet another PCI ID - the hardware shares the same descriptors as
MTL but we use a dedicated firmware binary file to allow for different
signature keys.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial copy/paste from MTL was incorrect, the hardware is
different and requires different descriptors along with a dedicated
firmware binary.
Fixes: 3851831f52 ("ASoC: SOF: Intel: pci-mtl: use ARL specific firmware definitions")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Same usual filters, SOF is required for DMIC and/or SoundWire support.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI ID insertion follows the increasing order in the table, but
this hardware follows MTL (MeteorLake).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we've restructured log intent item recovery to reconstruct the
incore deferred work state, apply further cleanups to that code to
remove boilerplate that is duplicated across all the _item.c files.
Having done that, collapse a bunch of trivial helpers to reduce the
overall call chain. That enables us to refactor the relog code so that
the ->relog_item implementations only have to know how to format the
implementation-specific data encoded in an intent item and don't
themselves have to handle the log item juggling.
v2: pick up rvb tags
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXEx4wAKCRBKO3ySh0YR
pn7tAQD1AmShSQYrSkbrxBJGy7pvT7T/KkaMvV/CDQiGU0N6+wEA2DfX33nmGRC1
g8THbLLBsFzdYPVXyKSXdAEC6zzKYgA=
=V5xP
-----END PGP SIGNATURE-----
Merge tag 'reconstruct-defer-cleanups-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeA
xfs: continue removing defer item boilerplate
Now that we've restructured log intent item recovery to reconstruct the
incore deferred work state, apply further cleanups to that code to
remove boilerplate that is duplicated across all the _item.c files.
Having done that, collapse a bunch of trivial helpers to reduce the
overall call chain. That enables us to refactor the relog code so that
the ->relog_item implementations only have to know how to format the
implementation-specific data encoded in an intent item and don't
themselves have to handle the log item juggling.
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'reconstruct-defer-cleanups-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: move ->iop_relog to struct xfs_defer_op_type
xfs: collapse the ->create_done functions
xfs: hoist xfs_trans_add_item calls to defer ops functions
xfs: clean out XFS_LI_DIRTY setting boilerplate from ->iop_relog
xfs: use xfs_defer_create_done for the relogging operation
xfs: hoist ->create_intent boilerplate to its callsite
xfs: collapse the ->finish_item helpers
xfs: hoist intent done flag setting to ->finish_item callsite
xfs: don't set XFS_TRANS_HAS_INTENT_DONE when there's no ATTRD log item
Use a common C comment (/*) instead of kernel-doc notation to prevent
warnings from scripts/kernel-doc.
gpio-max730x.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
gpio-max730x.c:3: warning: missing initial short description on line:
* Copyright (C) 2006 Juergen Beisert, Pengutronix
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Long Li reported a KASAN report from a UAF when intent recovery fails:
==================================================================
BUG: KASAN: slab-use-after-free in xfs_cui_release+0xb7/0xc0
Read of size 4 at addr ffff888012575e60 by task kworker/u8:3/103
CPU: 3 PID: 103 Comm: kworker/u8:3 Not tainted 6.4.0-rc7-next-20230619-00003-g94543a53f9a4-dirty #166
Workqueue: xfs-cil/sda xlog_cil_push_work
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
print_report+0xc2/0x600
kasan_report+0xb6/0xe0
xfs_cui_release+0xb7/0xc0
xfs_cud_item_release+0x3c/0x90
xfs_trans_committed_bulk+0x2d5/0x7f0
xlog_cil_committed+0xaba/0xf20
xlog_cil_push_work+0x1a60/0x2360
process_one_work+0x78e/0x1140
worker_thread+0x58b/0xf60
kthread+0x2cd/0x3c0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 531:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x55/0x60
kmem_cache_alloc+0x195/0x5f0
xfs_cui_init+0x198/0x1d0
xlog_recover_cui_commit_pass2+0x133/0x5f0
xlog_recover_items_pass2+0x107/0x230
xlog_recover_commit_trans+0x3e7/0x9c0
xlog_recovery_process_trans+0x140/0x1d0
xlog_recover_process_ophdr+0x1a0/0x3d0
xlog_recover_process_data+0x108/0x2d0
xlog_recover_process+0x1f6/0x280
xlog_do_recovery_pass+0x609/0xdb0
xlog_do_log_recovery+0x84/0xe0
xlog_do_recover+0x7d/0x470
xlog_recover+0x25f/0x490
xfs_log_mount+0x2dd/0x6f0
xfs_mountfs+0x11ce/0x1e70
xfs_fs_fill_super+0x10ec/0x1b20
get_tree_bdev+0x3c8/0x730
vfs_get_tree+0x89/0x2c0
path_mount+0xecf/0x1800
do_mount+0xf3/0x110
__x64_sys_mount+0x154/0x1f0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 531:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
__kasan_slab_free+0x114/0x1b0
kmem_cache_free+0xf8/0x510
xfs_cui_item_free+0x95/0xb0
xfs_cui_release+0x86/0xc0
xlog_recover_cancel_intents.isra.0+0xf8/0x210
xlog_recover_finish+0x7e7/0x980
xfs_log_mount_finish+0x2bb/0x4a0
xfs_mountfs+0x14bf/0x1e70
xfs_fs_fill_super+0x10ec/0x1b20
get_tree_bdev+0x3c8/0x730
vfs_get_tree+0x89/0x2c0
path_mount+0xecf/0x1800
do_mount+0xf3/0x110
__x64_sys_mount+0x154/0x1f0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff888012575dc8
which belongs to the cache xfs_cui_item of size 432
The buggy address is located 152 bytes inside of
freed 432-byte region [ffff888012575dc8, ffff888012575f78)
The buggy address belongs to the physical page:
page:ffffea0000495d00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888012576208 pfn:0x12574
head:ffffea0000495d00 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 001fffff80010200 ffff888012092f40 ffff888014570150 ffff888014570150
raw: ffff888012576208 00000000001e0010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888012575d00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
ffff888012575d80: fc fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb
>ffff888012575e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888012575e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888012575f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc
==================================================================
"If process intents fails, intent items left in AIL will be delete
from AIL and freed in error handling, even intent items that have been
recovered and created done items. After this, uaf will be triggered when
done item committed, because at this point the released intent item will
be accessed.
xlog_recover_finish xlog_cil_push_work
---------------------------- ---------------------------
xlog_recover_process_intents
xfs_cui_item_recover//cui_refcount == 1
xfs_trans_get_cud
xfs_trans_commit
<add cud item to cil>
xfs_cui_item_recover
<error occurred and return>
xlog_recover_cancel_intents
xfs_cui_release //cui_refcount == 0
xfs_cui_item_free //free cui
<release other intent items>
xlog_force_shutdown //shutdown
<...>
<push items in cil>
xlog_cil_committed
xfs_cud_item_release
xfs_cui_release // UAF
"Intent log items are created with a reference count of 2, one for the
creator, and one for the intent done object. Log recovery explicitly
drops the creator reference after it is inserted into the AIL, but it
then processes the log item as if it also owns the intent-done reference.
"The code in ->iop_recovery should assume that it passes the reference
to the done intent, we can remove the intent item from the AIL after
creating the done-intent, but if that code fails before creating the
done-intent then it needs to release the intent reference by log recovery
itself.
"That way when we go to cancel the intent, the only intents we find in
the AIL are the ones we know have not been processed yet and hence we
can safely drop both the creator and the intent done reference from
xlog_recover_cancel_intents().
"Hence if we remove the intent from the list of intents that need to
be recovered after we have done the initial recovery, we acheive two
things:
"1. the tail of the log can be moved forward with the commit of the
done intent or new intent to continue the operation, and
"2. We avoid the problem of trying to determine how many reference
counts we need to drop from intent recovery cancelling because we
never come across intents we've actually attempted recovery on."
Restated: The cause of the UAF is that xlog_recover_cancel_intents
thinks that it owns the refcount on any intent item in the AIL, and that
it's always safe to release these intent items. This is not true after
the recovery function creates an log intent done item and points it at
the log intent item because releasing the done item always releases the
intent item.
The runtime defer ops code avoids all this by tracking both the log
intent and the intent done items, and releasing only the intent done
item if both have been created. Long Li proposed fixing this by adding
state flags, but I have a more comprehensive fix.
First, observe that the latter half of the intent _recover functions are
nearly open-coded versions of the corresponding _finish_one function
that uses an onstack deferred work item to single-step through the item.
Second, notice that the recover function is not an exact match because
of the odd behavior that unfinished recovered work items are relogged
with separate log intent items instead of a single new log intent item,
which is what the defer ops machinery does.
Dave and I have long suspected that recovery should be reconstructing
the defer work state from what's in the recovered intent item. Now we
finally have an excuse to refactor the code to do that.
This series starts by fixing a resource leak in LARP recovery. We fix
the bug that Long Li reported by switching the intent recovery code to
construct chains of xfs_defer_pending objects and then using the defer
pending objects to track the intent/done item ownership. Finally, we
clean up the code to reconstruct the exact incore state, which means we
can remove all the opencoded _recover code, which makes maintaining log
items much easier.
v2: minor changes per review comments
v3: pick up more rvb tags, fix build errors
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZXExxgAKCRBKO3ySh0YR
pteoAP9mQhZ9tnB7Nj37dfx2BY6vcZXBJYDhUIzfzCh5B0wOSAD+MkTw8TTinlsq
HAXuAxf4cjyk5TNl9sXnJ+9L4+bUVQU=
=Y57I
-----END PGP SIGNATURE-----
Merge tag 'reconstruct-defer-work-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.8-mergeA
xfs: log intent item recovery should reconstruct defer work state
Long Li reported a KASAN report from a UAF when intent recovery fails:
==================================================================
BUG: KASAN: slab-use-after-free in xfs_cui_release+0xb7/0xc0
Read of size 4 at addr ffff888012575e60 by task kworker/u8:3/103
CPU: 3 PID: 103 Comm: kworker/u8:3 Not tainted 6.4.0-rc7-next-20230619-00003-g94543a53f9a4-dirty #166
Workqueue: xfs-cil/sda xlog_cil_push_work
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
print_report+0xc2/0x600
kasan_report+0xb6/0xe0
xfs_cui_release+0xb7/0xc0
xfs_cud_item_release+0x3c/0x90
xfs_trans_committed_bulk+0x2d5/0x7f0
xlog_cil_committed+0xaba/0xf20
xlog_cil_push_work+0x1a60/0x2360
process_one_work+0x78e/0x1140
worker_thread+0x58b/0xf60
kthread+0x2cd/0x3c0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 531:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x55/0x60
kmem_cache_alloc+0x195/0x5f0
xfs_cui_init+0x198/0x1d0
xlog_recover_cui_commit_pass2+0x133/0x5f0
xlog_recover_items_pass2+0x107/0x230
xlog_recover_commit_trans+0x3e7/0x9c0
xlog_recovery_process_trans+0x140/0x1d0
xlog_recover_process_ophdr+0x1a0/0x3d0
xlog_recover_process_data+0x108/0x2d0
xlog_recover_process+0x1f6/0x280
xlog_do_recovery_pass+0x609/0xdb0
xlog_do_log_recovery+0x84/0xe0
xlog_do_recover+0x7d/0x470
xlog_recover+0x25f/0x490
xfs_log_mount+0x2dd/0x6f0
xfs_mountfs+0x11ce/0x1e70
xfs_fs_fill_super+0x10ec/0x1b20
get_tree_bdev+0x3c8/0x730
vfs_get_tree+0x89/0x2c0
path_mount+0xecf/0x1800
do_mount+0xf3/0x110
__x64_sys_mount+0x154/0x1f0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 531:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
__kasan_slab_free+0x114/0x1b0
kmem_cache_free+0xf8/0x510
xfs_cui_item_free+0x95/0xb0
xfs_cui_release+0x86/0xc0
xlog_recover_cancel_intents.isra.0+0xf8/0x210
xlog_recover_finish+0x7e7/0x980
xfs_log_mount_finish+0x2bb/0x4a0
xfs_mountfs+0x14bf/0x1e70
xfs_fs_fill_super+0x10ec/0x1b20
get_tree_bdev+0x3c8/0x730
vfs_get_tree+0x89/0x2c0
path_mount+0xecf/0x1800
do_mount+0xf3/0x110
__x64_sys_mount+0x154/0x1f0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff888012575dc8
which belongs to the cache xfs_cui_item of size 432
The buggy address is located 152 bytes inside of
freed 432-byte region [ffff888012575dc8, ffff888012575f78)
The buggy address belongs to the physical page:
page:ffffea0000495d00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888012576208 pfn:0x12574
head:ffffea0000495d00 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 001fffff80010200 ffff888012092f40 ffff888014570150 ffff888014570150
raw: ffff888012576208 00000000001e0010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888012575d00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc
ffff888012575d80: fc fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb
>ffff888012575e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888012575e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888012575f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc
==================================================================
"If process intents fails, intent items left in AIL will be delete
from AIL and freed in error handling, even intent items that have been
recovered and created done items. After this, uaf will be triggered when
done item committed, because at this point the released intent item will
be accessed.
xlog_recover_finish xlog_cil_push_work
---------------------------- ---------------------------
xlog_recover_process_intents
xfs_cui_item_recover//cui_refcount == 1
xfs_trans_get_cud
xfs_trans_commit
<add cud item to cil>
xfs_cui_item_recover
<error occurred and return>
xlog_recover_cancel_intents
xfs_cui_release //cui_refcount == 0
xfs_cui_item_free //free cui
<release other intent items>
xlog_force_shutdown //shutdown
<...>
<push items in cil>
xlog_cil_committed
xfs_cud_item_release
xfs_cui_release // UAF
"Intent log items are created with a reference count of 2, one for the
creator, and one for the intent done object. Log recovery explicitly
drops the creator reference after it is inserted into the AIL, but it
then processes the log item as if it also owns the intent-done reference.
"The code in ->iop_recovery should assume that it passes the reference
to the done intent, we can remove the intent item from the AIL after
creating the done-intent, but if that code fails before creating the
done-intent then it needs to release the intent reference by log recovery
itself.
"That way when we go to cancel the intent, the only intents we find in
the AIL are the ones we know have not been processed yet and hence we
can safely drop both the creator and the intent done reference from
xlog_recover_cancel_intents().
"Hence if we remove the intent from the list of intents that need to
be recovered after we have done the initial recovery, we acheive two
things:
"1. the tail of the log can be moved forward with the commit of the
done intent or new intent to continue the operation, and
"2. We avoid the problem of trying to determine how many reference
counts we need to drop from intent recovery cancelling because we
never come across intents we've actually attempted recovery on."
Restated: The cause of the UAF is that xlog_recover_cancel_intents
thinks that it owns the refcount on any intent item in the AIL, and that
it's always safe to release these intent items. This is not true after
the recovery function creates an log intent done item and points it at
the log intent item because releasing the done item always releases the
intent item.
The runtime defer ops code avoids all this by tracking both the log
intent and the intent done items, and releasing only the intent done
item if both have been created. Long Li proposed fixing this by adding
state flags, but I have a more comprehensive fix.
First, observe that the latter half of the intent _recover functions are
nearly open-coded versions of the corresponding _finish_one function
that uses an onstack deferred work item to single-step through the item.
Second, notice that the recover function is not an exact match because
of the odd behavior that unfinished recovered work items are relogged
with separate log intent items instead of a single new log intent item,
which is what the defer ops machinery does.
Dave and I have long suspected that recovery should be reconstructing
the defer work state from what's in the recovered intent item. Now we
finally have an excuse to refactor the code to do that.
This series starts by fixing a resource leak in LARP recovery. We fix
the bug that Long Li reported by switching the intent recovery code to
construct chains of xfs_defer_pending objects and then using the defer
pending objects to track the intent/done item ownership. Finally, we
clean up the code to reconstruct the exact incore state, which means we
can remove all the opencoded _recover code, which makes maintaining log
items much easier.
v2: minor changes per review comments
v3: pick up more rvb tags, fix build errors
This has been lightly tested with fstests. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'reconstruct-defer-work-6.8_2023-12-06' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: move ->iop_recover to xfs_defer_op_type
xfs: use xfs_defer_finish_one to finish recovered work items
xfs: dump the recovered xattri log item if corruption happens
xfs: recreate work items when recovering intent items
xfs: transfer recovered intent item ownership in ->iop_recover
xfs: pass the xfs_defer_pending object to iop_recover
xfs: use xfs_defer_pending objects to recover intent items
xfs: don't leak recovered attri intent items