Commit graph

1,264,717 commits

Author SHA1 Message Date
Dmitry Baryshkov
b19e6f7dd2 drm/msm/dpu: use devres-managed allocation for interrupts data
Use devm_kzalloc to create interrupts data structure. This allows us to
remove corresponding kfree and drop dpu_hw_intr_destroy() function.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570038/
Link: https://lore.kernel.org/r/20231201211845.1026967-4-dmitry.baryshkov@linaro.org
2023-12-05 22:14:33 +03:00
Dmitry Baryshkov
b830b06f00 drm/msm/dpu: remove IS_ERR_OR_NULL for dpu_hw_intr_init() error handling
Using IS_ERR_OR_NULL() together with PTR_ERR() is a typical mistake. If
the value is NULL, then the function will return 0 instead of a proper
return code. Replace IS_ERR_OR_NULL() with IS_ERR() in the
dpu_hw_intr_init() error check.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570036/
Link: https://lore.kernel.org/r/20231201211845.1026967-3-dmitry.baryshkov@linaro.org
2023-12-05 22:14:33 +03:00
Dmitry Baryshkov
134c78c962 drm/msm/dpu: cleanup dpu_kms_hw_init error path
It was noticed that dpu_kms_hw_init()'s error path contains several
labels which point to the same code path. Replace all of them with a
single label.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570035/
Link: https://lore.kernel.org/r/20231201211845.1026967-2-dmitry.baryshkov@linaro.org
2023-12-05 22:14:32 +03:00
Qiuxu Zhuo
6807434ff0 EDAC/igen6: Add Intel Meteor Lake-P SoCs support
Add Intel Meteor Lake-P SoC compute die IDs for EDAC support.
These Meteor Lake-P SoCs share similar IBECC registers with
Alder Lake-P SoCs.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2023-12-05 10:59:13 -08:00
Qiuxu Zhuo
3c77090c12 EDAC/igen6: Add Intel Meteor Lake-PS SoCs support
Add Intel Meteor Lake-PS SoC compute die IDs for EDAC support.
These SoCs share similar IBECC registers with Alder Lake-P SoCs.
The only difference is that IBECC presence is detected through an
MMIO-mapped register instead of the capability register in the
PCI configuration space.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2023-12-05 10:59:13 -08:00
Qiuxu Zhuo
d23627a768 EDAC/igen6: Add Intel Raptor Lake-P SoCs support
Add Intel Raptor Lake-P SoC compute die IDs for EDAC support.
These Raptor Lake-P SoCs share similar IBECC registers with Alder Lake-P
SoCs but extend the most significant bit of the error address logged
in IBECC from bit 38 to bit 45.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2023-12-05 10:59:13 -08:00
Qiuxu Zhuo
c4a5398991 EDAC/igen6: Add Intel Alder Lake-N SoCs support
Add Intel Alder Lake-N SoC compute die IDs for EDAC support.
Alder Lake-N, with one memory controller, is a reduced version of
Alder Lake-P, which has two memory controllers.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2023-12-05 10:59:13 -08:00
Qiuxu Zhuo
a264f715ec EDAC/igen6: Make get_mchbar() helper function
Make get_mchbar() helper function to retrieve the BAR address of
the memory controller. No function changes.

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2023-12-05 10:59:13 -08:00
Jacob Keller
a206d9959f iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero
In __iavf_set_coalesce, the driver checks both ec->rx_coalesce_usecs and
ec->tx_coalesce_usecs for validity. It does this via a chain if if/else-if
blocks. If every single branch of the series of if statements exited, this
would be fine. However, the rx_coalesce_usecs is checked against zero to
print an informative message if use_adaptive_rx_coalesce is enabled. If
this check is true, it short circuits the entire chain of statements,
preventing validation of the tx_coalesce_usecs field.

Indeed, since commit e792779e6b ("iavf: Prevent changing static ITR
values if adaptive moderation is on") the iavf driver actually rejects any
change to the tx_coalesce_usecs or rx_coalesce_usecs when
use_adaptive_tx_coalesce or use_adaptive_rx_coalesce is enabled, making
this checking a bit redundant.

Fix this error by removing the unnecessary and redundant checks for
use_adaptive_rx_coalesce and use_adaptive_tx_coalesce. Since zero is a
valid value, and since the tx_coalesce_usecs and rx_coalesce_usecs fields
are already unsigned, remove the minimum value check. This allows assigning
an ITR value ranging from 0-8160 as described by the printed message.

Fixes: 65e87c0398 ("i40evf: support queue-specific settings for interrupt moderation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05 10:51:22 -08:00
Ivan Vecera
7d9f22b3d3 i40e: Fix unexpected MFS warning message
Commit 3a2c6ced90 ("i40e: Add a check to see if MFS is set") added
a warning message that reports unexpected size of port's MFS (max
frame size) value. This message use for the port number local
variable 'i' that is wrong.
In i40e_probe() this 'i' variable is used only to iterate VSIs
to find FDIR VSI:

<code>
...
/* if FDIR VSI was set up, start it now */
        for (i = 0; i < pf->num_alloc_vsi; i++) {
                if (pf->vsi[i] && pf->vsi[i]->type == I40E_VSI_FDIR) {
                        i40e_vsi_open(pf->vsi[i]);
                        break;
                }
        }
...
</code>

So the warning message use for the port number index of FDIR VSI
if this exists or pf->num_alloc_vsi if not.

Fix the message by using 'pf->hw.port' for the port number.

Fixes: 3a2c6ced90 ("i40e: Add a check to see if MFS is set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05 10:51:22 -08:00
Marcin Szycik
4e7f0087b0 ice: Restore fix disabling RX VLAN filtering
Fix setting dis_rx_filtering depending on whether port vlan is being
turned on or off. This was originally fixed in commit c793f8ea15 ("ice:
Fix disabling Rx VLAN filtering with port VLAN enabled"), but while
refactoring ice_vf_vsi_init_vlan_ops(), the fix has been lost. Restore the
fix along with the original comment from that change.

Also delete duplicate lines in ice_port_vlan_on().

Fixes: 2946204b3f ("ice: implement bridge port vlan")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05 10:51:22 -08:00
Michal Swiatkowski
f8e9889f54 ice: change vfs.num_msix_per to vf->num_msix
vfs::num_msix_per should be only used as default value for
vf->num_msix. For other use cases vf->num_msix should be used, as VF can
have different MSI-X amount values.

Fix incorrect register index calculation. vfs::num_msix_per and
pf->sriov_base_vector shouldn't be used after implementation of changing
MSI-X amount on VFs. Instead vf->first_vector_idx should be used, as it
is storing value for first irq index.

Fixes: fe1c5ca2fe ("ice: implement num_msix field per VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-05 10:51:22 -08:00
Colin Ian King
018b042485 perf bench sched-seccomp-notify: Fix spelling mistake "synchronious" -> "synchronous"
There is a spelling mistake in an option description. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20230630080029.15614-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:48:52 -03:00
Ian Rogers
144081ef78 perf test: Add basic 'perf diff' test
There are some old bug reports on perf diff crashing:

https://rhaas.blogspot.com/2012/06/perf-good-bad-ugly.html

Happening across them I was prompted to add two very basic tests that
will give some 'perf diff' coverage.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231120190408.281826-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:48:52 -03:00
Kan Liang
a4320085a6 perf mem: Fix error on hybrid related to availability of mem event in a PMU
The below error can be triggered on a hybrid machine.

 $ perf mem record -t load sleep 1
 event syntax error: 'breakpoint/mem-loads,ldlat=30/P'
                                \___ Bad event or PMU

 Unable to find PMU or event on a PMU of 'breakpoint'

In the perf_mem_events__record_args(), the current perf never checks the
availability of a mem event on a given PMU. All the PMUs will be added
to the perf mem event list. Perf errors out for the unsupported PMU.

Extend perf_mem_event__supported() and take a PMU into account. Check
the mem event for each PMU before adding it to the perf mem event list.

Optimize the perf_mem_events__init() a little bit. The function is to
check whether the mem events are supported in the system. It doesn't
need to scan all PMUs. Just return with the first supported PMU is good
enough.

Fixes: 5752c20f37 ("perf mem: Scan all PMUs instead of just core ones")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231128203940.3964287-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:48:52 -03:00
Athira Rajeev
9eef41014f perf vendor events powerpc: Update datasource event name to fix duplicate events
Running "perf list" on powerpc fails with segfault as below:

   $ ./perf list
   Segmentation fault (core dumped)
   $

This happens because of duplicate events in the JSON list.  The powerpc
JSON event list contains some event with same event name, but different
event code. They are:

- PM_INST_FROM_L3MISS (Present in datasource and frontend)
- PM_MRK_DATA_FROM_L2MISS (Present in datasource and marked)
- PM_MRK_INST_FROM_L3MISS (Present in datasource and marked)
- PM_MRK_DATA_FROM_L3MISS (Present in datasource and marked)

pmu_events_table__num_events() uses the value from table_pmu->num_entries
which includes duplicate events as well. This causes issue during "perf
list" and results in a segmentation fault.

Since both event codes are valid, append _DSRC to the Data Source events
(datasource.json), so that they would have a unique name.

Also add PM_DATA_FROM_L2MISS_DSRC and PM_DATA_FROM_L3MISS_DSRC events.

With the fix, 'perf list' works as expected.

Fixes: fc14358075 ("perf vendor events power10: Update JSON/events")
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123160110.94090-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:48:52 -03:00
Ian Rogers
7d723ef83b perf test: Add basic 'perf list --json" test
Test that JSON output produces valid JSON.

Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:48:52 -03:00
Ian Rogers
8226e4a3b3 perf test: Use common python setup library
Avoid replicated logic by having a common library to set the PYTHON
environment variable.

Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:48:52 -03:00
Ian Rogers
b809fc656e perf build: Shellcheck support for OUTPUT directory
Migrate Makefile.tests to Build so that variables like rule_mkdir are
defined via Makefile.build (needed so the output directory can be
created). This requires SHELLCHECK being exported and the clean rule
tweaking to remove the files in find.

Change find "-perm -o=x" as it was failing on my Debian based Linux
kernel tree, switch to using "-executable".

Adding a filename prefix of "." to the shellcheck log files is a pain
and error prone in make, remove this prefix and just add the
shellcheck log files to .gitignore.

Fix the command echo so that running the test is displayed.

Fixes: 1638b11ef8 ("perf tools: Add perf binary dependent rule for shellcheck log in Makefile.perf")
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:46:43 -03:00
Ilkka Koskinen
16438b652b perf vendor events arm64 AmpereOneX: Add core PMU events and metrics
Add JSON files for AmpereOneX core PMU events and metrics.

Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231201021550.1109196-4-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:46:43 -03:00
Ilkka Koskinen
10a149e4b4 perf vendor events arm64 AmpereOne: Rename BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT
The documentation wrongly called the event as BPU_FLUSH_MEM_FAULT and now
has been fixed. Correct the name in the perf tool as well.

Fixes: a9650b7f6f ("perf vendor events arm64: Add AmpereOne core PMU events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231201021550.1109196-3-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-12-05 15:46:43 -03:00
Jakub Kicinski
f7c0e362a2 tools: ynl: remove generated user space code from git
The ynl-generated user space C code is already above 25kLoC
and is growing.

The initial reason to commit these files was to make reviewing changes
to the generator easier. Unfortunately, it has the opposite effect on
reviewing changes to specs, and we get far more changes to specs
than to the generator.

Uncommit those fails, as they are generated on the fly as needed.
netdev patchwork now runs a script on each series to create a diff
of generated code on the fly, for the rare cases when looking at
it is helpful:
https://github.com/kuba-moo/nipa/blob/master/tests/series/ynl/ynl.sh

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05 10:24:39 -08:00
Ilkka Koskinen
90fe70d4e2 perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields
AmpereOne metrics were missing DefaultMetricgroupName from metrics with
"Default" in group name resulting perf to segfault. Add the missing
field to address the issue.

Fixes: 59faeaf80d ("perf vendor events arm64: Fix for AmpereOne metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231201021550.1109196-2-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-12-05 10:16:40 -08:00
Ian Rogers
e2b005d6ec perf metrics: Avoid segv if default metricgroup isn't set
A metric is default by having "Default" within its groups. The default
metricgroup name needn't be set and this can result in segv in
default_metricgroup_cmp and perf_stat__print_shadow_stats_metricgroup
that assume it has a value when there is a Default metric group. To
avoid the segv initialize the value to "".

Fixes: 1c0e47956a ("perf metrics: Sort the Default metricgroup")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: stable@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231204182330.654255-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-12-05 10:15:10 -08:00
Pin-yen Lin
4900e0396e drm/edp-panel: Sort the panel entries
Move the order of CMN 0x14e5 to make the list sorted.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231205123630.988663-3-treapking@chromium.org
2023-12-05 09:57:38 -08:00
Abel Vesa
8ebb1fc2e6 drm/panel-edp: Add SDC ATNA45AF01
Add support for the SDC ATNA45AF01 panel.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201-x1e80100-drm-panel-edp-v2-1-b0173484631a@linaro.org
2023-12-05 09:57:19 -08:00
Ville Syrjälä
01a39f1c4f drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.

Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.

TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...

Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-12-05 19:55:19 +02:00
Thomas Bogendoerfer
a58a173444 MIPS: kernel: Clear FPU states when setting up kernel threads
io_uring sets up the io worker kernel thread via a syscall out of an
user space prrocess. This process might have used FPU and since
copy_thread() didn't clear FPU states for kernel threads a BUG()
is triggered for using FPU inside kernel. Move code around
to always clear FPU state for user and kernel threads.

Cc: stable@vger.kernel.org
Reported-by: Aurelien Jarno <aurel32@debian.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1055021
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-12-05 18:47:11 +01:00
Jiaxun Yang
c7206e7bd2 MIPS: Loongson64: Handle more memory types passed from firmware
There are many types of revsered memory passed from firmware
that should be reserved in memblock, and UMA memory passed
from firmware that should be added to system memory for system
to use.

Also for memblock there is no need to align those space into page,
which actually cause problems.

Handle them properly to prevent memory corruption on some systems.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-12-05 18:45:24 +01:00
Jiaxun Yang
edc0378eee MIPS: Loongson64: Enable DMA noncoherent support
There are some Loongson64 systems come with broken coherent DMA
support, firmware will set a bit in boot_param and pass nocoherentio
in cmdline.

However nonconherent support was missed out when spin off Loongson-2EF
form Loongson64, and that boot_param change never made itself into
upstream.

Support DMA noncoherent properly to get those systems working.

Cc: stable@vger.kernel.org
Fixes: 71e2f4dd5a ("MIPS: Fork loongson2ef from loongson64")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-12-05 18:45:14 +01:00
Jiaxun Yang
8f7aa77a46 MIPS: Loongson64: Reserve vgabios memory on boot
vgabios is passed from firmware to kernel on Loongson64 systems.
Sane firmware will keep this pointer in reserved memory space
passed from the firmware but insane firmware keeps it in low
memory before kernel entry that is not reserved.

Previously kernel won't try to allocate memory from low memory
before kernel entry on boot, but after converting to memblock
it will do that.

Fix by resversing those memory on early boot.

Cc: stable@vger.kernel.org
Fixes: a94e4f24ec ("MIPS: init: Drop boot_mem_map")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-12-05 18:44:31 +01:00
Stefan Wiehler
55702ec960 mips/smp: Call rcutree_report_cpu_starting() earlier
rcutree_report_cpu_starting() must be called before
clockevents_register_device() to avoid the following lockdep splat triggered by
calling list_add() when CONFIG_PROVE_RCU_LIST=y:

  WARNING: suspicious RCU usage
  ...
  -----------------------------
  kernel/locking/lockdep.c:3680 RCU-list traversed in non-reader section!!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 1, debug_locks = 1
  no locks held by swapper/1/0.
  ...
  Call Trace:
  [<ffffffff8012a434>] show_stack+0x64/0x158
  [<ffffffff80a93d98>] dump_stack_lvl+0x90/0xc4
  [<ffffffff801c9e9c>] __lock_acquire+0x1404/0x2940
  [<ffffffff801cbf3c>] lock_acquire+0x14c/0x448
  [<ffffffff80aa4260>] _raw_spin_lock_irqsave+0x50/0x88
  [<ffffffff8021e0c8>] clockevents_register_device+0x60/0x1e8
  [<ffffffff80130ff0>] r4k_clockevent_init+0x220/0x3a0
  [<ffffffff801339d0>] start_secondary+0x50/0x3b8

raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.

See also commit 29368e0939 ("x86/smpboot:  Move rcu_cpu_starting() earlier"),
commit de5d9dae15 ("s390/smp: move rcu_cpu_starting() earlier") and commit
99f070b623 ("powerpc/smp: Call rcu_cpu_starting() earlier").

Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2023-12-05 18:43:05 +01:00
Bjorn Helgaas
1dfc86af06 x86/pci: Reorder pci_mmcfg_arch_map() definition before calls
The typical style is to define functions before calling them.  Move
pci_mmcfg_arch_map() and pci_mmcfg_arch_unmap() earlier so they're defined
before they're called.  No functional change intended.

Link: https://lore.kernel.org/r/20231121183643.249006-10-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:57:03 -06:00
Bjorn Helgaas
f126598326 x86/pci: Return pci_mmconfig_add() failure early
If pci_mmconfig_alloc() fails, return the failure early so it's obvious
that the failure is the exception, and the success is the normal case.  No
functional change intended.

Link: https://lore.kernel.org/r/20231121183643.249006-9-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:56:59 -06:00
Bjorn Helgaas
f284dff47b x86/pci: Comment pci_mmconfig_insert() obscure MCFG dependency
In pci_mmconfig_insert(), there's no reference to "addr" between locking
pci_mmcfg_lock and testing "addr", so it *looks* like we should move the
test before the lock.

But 07f9b61c39 ("x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at
address zero") did that, which broke things by returning -EINVAL when
"addr" is zero instead of -EEXIST.

So 07f9b61c39 was reverted by 67d470e0e1 ("Revert "x86/PCI: MMCONFIG:
Check earlier for MMCONFIG region at address zero"").

Add a comment about this issue to prevent it from happening again.

Link: https://lore.kernel.org/r/20231121183643.249006-8-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:56:56 -06:00
Bjorn Helgaas
d26e7fc3d9 x86/pci: Rename pci_mmcfg_check_reserved() to pci_mmcfg_reserved()
"pci_mmcfg_check_reserved()" doesn't give a hint about what the boolean
return value means.  Rename it to pci_mmcfg_reserved() so testing
"if (pci_mmcfg_reserved())" makes sense.

Update callers to treat the return value as boolean instead of comparing
with 0.

Link: https://lore.kernel.org/r/20231121183643.249006-7-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:56:53 -06:00
Bjorn Helgaas
9ad67912d0 x86/pci: Rename acpi_mcfg_check_entry() to acpi_mcfg_valid_entry()
"acpi_mcfg_check_entry()" doesn't give a hint about what the return value
means.  Rename it to "acpi_mcfg_valid_entry()", convert the return value to
bool, and update the return values and callers to match so testing
"if (acpi_mcfg_valid_entry())" makes sense.

Link: https://lore.kernel.org/r/20231121183643.249006-6-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:56:49 -06:00
Bjorn Helgaas
704891033b x86/pci: Rename 'MMCONFIG' to 'ECAM', use pr_fmt
The "MMCONFIG" term is not used in PCI/PCIe specs.  Replace it with "ECAM",
the term used in PCIe r6.0, sec 7.2.2.

Define pr_fmt() instead of repeating PREFIX in every log message.

Link: https://lore.kernel.org/r/20231121183643.249006-5-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:56:46 -06:00
Bjorn Helgaas
286ae88c9e x86/pci: Add MCFG debug logging
MCFG handling is a frequent source of problems.  Add more logging to aid in
debugging.

Enable the logging with CONFIG_DYNAMIC_DEBUG=y and the kernel boot
parameter 'dyndbg="file arch/x86/pci +p"'.

Link: https://lore.kernel.org/r/20231121183643.249006-4-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:56:39 -06:00
Bjorn Helgaas
e1fad9dd25 x86/pci: Reword ECAM EfiMemoryMappedIO logging to avoid 'reserved'
fd3a8cff4d ("x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM
space") added the concept of using the EFI memory map to help decide
whether ECAM space mentioned in the MCFG table is valid.

Unfortunately it described that EfiMemoryMappedIO space as "reserved", but
it is actually not *reserved* by the EFI memory map.  EfiMemoryMappedIO
only means the firmware requested that the OS map this space for use by
firmware runtime services.

Change the dmesg logging to describe it as simply "EfiMemoryMappedIO", not
as "reserved as EfiMemoryMappedIO".  A previous commit actually *does*
reserve the space if ACPI PNP0C01/02 devices haven't done so:

  - PCI: ECAM at [mem 0xe0000000-0xefffffff] reserved as EfiMemoryMappedIO
  + PCI: ECAM at [mem 0xe0000000-0xefffffff] is EfiMemoryMappedIO; assuming valid
    PCI: ECAM [mem 0xe0000000-0xefffffff] reserved to work around lack of ACPI motherboard _CRS

Link: https://lore.kernel.org/r/20231121183643.249006-3-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-05 10:56:33 -06:00
Bjorn Helgaas
070909e56a x86/pci: Reserve ECAM if BIOS didn't include it in PNP0C02 _CRS
Tomasz, Sebastian, and some Proxmox users reported problems initializing
ixgbe NICs.

I think the problem is that ECAM space described in the ACPI MCFG table is
not reserved via a PNP0C02 _CRS method as required by the PCI Firmware spec
(r3.3, sec 4.1.2), but it *is* included in the PNP0A03 host bridge _CRS as
part of the MMIO aperture.

If we allocate space for a PCI BAR, we're likely to allocate it from that
ECAM space, which obviously cannot work.

This could happen for any device, but in the ixgbe case it happens because
it's an SR-IOV device and the BIOS didn't allocate space for the VF BARs,
so Linux reallocated the bridge window leading to ixgbe and put it on top
of the ECAM space.  From Tomasz' system:

  PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
  PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources
  pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window]

  pci 0000:00:01.1: PCI bridge to [bus 02-03]
  pci 0000:00:01.1:   bridge window [mem 0xfb900000-0xfbbfffff]
  pci 0000:02:00.0: [8086:10fb] type 00 class 0x020000  # ixgbe
  pci 0000:02:00.0: reg 0x10: [mem 0xfba80000-0xfbafffff 64bit]
  pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
  pci 0000:02:00.0: BAR 7: no space for [mem size 0x00100000 64bit]   # VF BAR 0

  pci_bus 0000:00: No. 2 try to assign unassigned res
  pci 0000:00:01.1: resource 14 [mem 0xfb900000-0xfbbfffff] released
  pci 0000:00:01.1: BAR 14: assigned [mem 0x80000000-0x806fffff]
  pci 0000:02:00.0: BAR 0: assigned [mem 0x80000000-0x8007ffff 64bit]
  pci 0000:02:00.0: BAR 7: assigned [mem 0x80204000-0x80303fff 64bit] # VF BAR 0

Fixes: 07eab0901e ("efi/x86: Remove EfiMemoryMappedIO from E820 map")
Fixes: fd3a8cff4d ("x86/pci: Treat EfiMemoryMappedIO as reservation of ECAM space")
Reported-by: Tomasz Pala <gotar@polanet.pl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218050
Reported-by: Sebastian Manciulea <manciuleas@protonmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218107
Link: https://forum.proxmox.com/threads/proxmox-8-kernel-6-2-16-4-pve-ixgbe-driver-fails-to-load-due-to-pci-device-probing-failure.131203/
Link: https://lore.kernel.org/r/20231121183643.249006-2-helgaas@kernel.org
Tested-by: Tomasz Pala <gotar@polanet.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v6.2+
2023-12-05 10:56:07 -06:00
Jakub Kicinski
5ab500d6f9 Merge branch 'sfc-implement-ndo_hwtstamp_-get-set'
Alex Austin says:

====================
sfc: Implement ndo_hwtstamp_(get|set)

Implement ndo_hwtstamp_get and ndo_hwtstamp_set for sfc and sfc-siena.
====================

Link: https://lore.kernel.org/r/20231130135826.19018-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05 07:45:45 -08:00
Alex Austin
d82afc800c sfc-siena: Implement ndo_hwtstamp_(get|set)
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.

Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231130135826.19018-3-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05 07:45:43 -08:00
Alex Austin
1ac23674a9 sfc: Implement ndo_hwtstamp_(get|set)
Update efx->ptp_data to use kernel_hwtstamp_config and implement
ndo_hwtstamp_(get|set). Remove SIOCGHWTSTAMP and SIOCSHWTSTAMP from
efx_ioctl.

Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231130135826.19018-2-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05 07:45:43 -08:00
Richard Fitzgerald
138a4e2a26
ASoC: Intel: sof_sdw_cs_amp: Connect outputs to a speaker widget
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so
that there is a complete logical path to a speaker.

There is no particular reason to use multiple speaker widgets.
The CS35L56 are designed to work together as a set so they have
all been connected to a single speaker widget.

Instead of a hardcoded list of codec widget names, the code walks
through all the codecs on the dailink and for every cs35l56 it uses
its name prefix to construct the source end of the route. This adds
a small amount of overhead during probe but has the benefit that it
isn't dependent on every system using the same prefixes.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231205135001.2506070-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-05 15:41:31 +00:00
Karthikeyan Periyasamy
c8a5f34ad8 wifi: ath12k: avoid repeated wiphy access from hw
Currently repeated access of wiphy data from mac80211 hw structure is
happen inside the mac80211 registration helper functions. So optimize
these helper functions by storing wiphy data locally and accessing it
directly.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231201013735.2292313-1-quic_periyasa@quicinc.com
2023-12-05 17:10:43 +02:00
Kang Yang
ed7e818a7b wifi: ath12k: fix and enable AP mode for WCN7850
For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again.  Then an
error will return which makes AP mode startup fail.

Kernel log:

[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22

wpa_supplicant log:

Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED

So fix this check and enable AP mode for WCN7850, as now AP mode works normally.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
2023-12-05 17:09:50 +02:00
Kang Yang
a3012f206d wifi: ath12k: set IRQ affinity to CPU0 in case of one MSI vector
With VT-d disabled on Intel platform, ath12k gets only one MSI
vector. In that case, ath12k does not free IRQ when doing suspend,
hence the kernel has to migrate it to CPU0 (if it was affine to
other CPUs) and allocates a new MSI vector. However, ath12k has
no chance to reconfig it to HW srngs during this phase, thus
ath12k fails to resume.

This issue can be fixed by setting IRQ affinity to CPU0 before
request_irq is called. With such affinity, migration will not
happen and thus the vector keeps unchanged during suspend/resume.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-8-quic_kangyang@quicinc.com
2023-12-05 17:04:19 +02:00
Kang Yang
08d52ba296 wifi: ath12k: do not restore ASPM in case of single MSI vector
Current code enables ASPM by default, it allows MHI to enter M2 state.
In case of one MSI vector, system hang is observed if ath12k does MHI
register reading in this state.

The workaround here is to prevent MHI from entering M2 state, this can
be done by disabling ASPM if only one MSI vector is used. When using 32
vectors ASPM is enabled as before.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-7-quic_kangyang@quicinc.com
2023-12-05 17:04:19 +02:00
Kang Yang
8398654398 wifi: ath12k: add support one MSI vector
On some platforms it's not possible to allocate 32 MSI vectors for
various reasons, maybe kernel configuration, VT-d disabled, buggy BIOS
etc. So ath12k was not able to use WCN7850 PCI devices on those
platforms. Add support for one MSI vector to solve that.

In case of one MSI vector, interrupt migration needs to be disabled.
This is because when interrupt migration happens, the msi_data may
change. However, msi_data is already programmed to rings during initial
phase and ath12k has no way to know that msi_data is changed during run
time and reprogram again.

In case of one MSI vector, MHI subsystem should not use IRQF_NO_SUSPEND
as WCN7850 doesn't set this flag too. Ath12k doesn't need to leave IRQ
enabled in suspend state.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121021304.12966-6-quic_kangyang@quicinc.com
2023-12-05 17:04:19 +02:00