Commit graph

1,264,717 commits

Author SHA1 Message Date
Chengming Zhou
422e7d5437 slub: Prepare __slab_free() for unfrozen partial slab out of node partial list
Now the partially empty slub will be frozen when taken out of node partial
list, so the __slab_free() will know from "was_frozen" that the partially
empty slab is not on node partial list and is a cpu or cpu partial slab
of some cpu.

But we will change this, make partial slabs leave the node partial list
with unfrozen state, so we need to change __slab_free() to use the new
slab_test_node_partial() we just introduced.

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-12-04 17:54:53 +01:00
Bitao Hu
839a40d1e7 nvme: fix deadlock between reset and scan
If controller reset occurs when allocating namespace, both
nvme_reset_work and nvme_scan_work will hang, as shown below.

Test Scripts:

    for ((t=1;t<=128;t++))
    do
    nsid=`nvme create-ns /dev/nvme1 -s 14537724 -c 14537724 -f 0 -m 0 \
    -d 0 | awk -F: '{print($NF);}'`
    nvme attach-ns /dev/nvme1 -n $nsid -c 0
    done
    nvme reset /dev/nvme1

We will find that both nvme_reset_work and nvme_scan_work hung:

    INFO: task kworker/u249:4:17848 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
    message.
    task:kworker/u249:4  state:D stack:    0 pid:17848 ppid:     2
    flags:0x00000028
    Workqueue: nvme-reset-wq nvme_reset_work [nvme]
    Call trace:
    __switch_to+0xb4/0xfc
    __schedule+0x22c/0x670
    schedule+0x4c/0xd0
    blk_mq_freeze_queue_wait+0x84/0xc0
    nvme_wait_freeze+0x40/0x64 [nvme_core]
    nvme_reset_work+0x1c0/0x5cc [nvme]
    process_one_work+0x1d8/0x4b0
    worker_thread+0x230/0x440
    kthread+0x114/0x120
    INFO: task kworker/u249:3:22404 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
    message.
    task:kworker/u249:3  state:D stack:    0 pid:22404 ppid:     2
    flags:0x00000028
    Workqueue: nvme-wq nvme_scan_work [nvme_core]
    Call trace:
    __switch_to+0xb4/0xfc
    __schedule+0x22c/0x670
    schedule+0x4c/0xd0
    rwsem_down_write_slowpath+0x32c/0x98c
    down_write+0x70/0x80
    nvme_alloc_ns+0x1ac/0x38c [nvme_core]
    nvme_validate_or_alloc_ns+0xbc/0x150 [nvme_core]
    nvme_scan_ns_list+0xe8/0x2e4 [nvme_core]
    nvme_scan_work+0x60/0x500 [nvme_core]
    process_one_work+0x1d8/0x4b0
    worker_thread+0x260/0x440
    kthread+0x114/0x120
    INFO: task nvme:28428 blocked for more than 120 seconds.
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
    message.
    task:nvme            state:D stack:    0 pid:28428 ppid: 27119
    flags:0x00000000
    Call trace:
    __switch_to+0xb4/0xfc
    __schedule+0x22c/0x670
    schedule+0x4c/0xd0
    schedule_timeout+0x160/0x194
    do_wait_for_common+0xac/0x1d0
    __wait_for_common+0x78/0x100
    wait_for_completion+0x24/0x30
    __flush_work.isra.0+0x74/0x90
    flush_work+0x14/0x20
    nvme_reset_ctrl_sync+0x50/0x74 [nvme_core]
    nvme_dev_ioctl+0x1b0/0x250 [nvme_core]
    __arm64_sys_ioctl+0xa8/0xf0
    el0_svc_common+0x88/0x234
    do_el0_svc+0x7c/0x90
    el0_svc+0x1c/0x30
    el0_sync_handler+0xa8/0xb0
    el0_sync+0x148/0x180

The reason for the hang is that nvme_reset_work occurs while nvme_scan_work
is still running. nvme_scan_work may add new ns into ctrl->namespaces
list after nvme_reset_work frozen all ns->q in ctrl->namespaces list.
The newly added ns is not frozen, so nvme_wait_freeze will wait forever.
Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so
nvme_scan_work will also wait forever. Now we are deadlocked!

PROCESS1                         PROCESS2
==============                   ==============
nvme_scan_work
  ...                            nvme_reset_work
  nvme_validate_or_alloc_ns        nvme_dev_disable
    nvme_alloc_ns                    nvme_start_freeze
     down_write                      ...
     nvme_ns_add_to_ctrl_list        ...
     up_write                      nvme_wait_freeze
    ...                              down_read
    nvme_alloc_ns                    blk_mq_freeze_queue_wait
     down_write

Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in
nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check
it before adding the new namespace (under the namespaces_rwsem).

Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04 08:39:04 -08:00
Nitesh Shetty
20dc66f2d7 nvme: prevent potential spectre v1 gadget
This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn:
potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)"
Prevent the contents of kernel memory from being leaked to  user space
via speculative execution by using array_index_nospec.

Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04 08:39:04 -08:00
Shin'ichiro Kawasaki
29ac4b2f92 nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions
Currently two similar config options NVME_HOST_AUTH and NVME_TARGET_AUTH
have almost same descriptions. It is confusing to choose them in
menuconfig. Improve the descriptions to distinguish them.

Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04 08:39:03 -08:00
Keith Busch
7be866b1cf nvme-ioctl: move capable() admin check to the end
This can be an expensive call on some kernel configs. Move it to the end
after checking the cheaper ways to determine if the command is allowed.

Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04 08:39:03 -08:00
Keith Busch
e6e7f7ac03 nvme: ensure reset state check ordering
A different CPU may be setting the ctrl->state value, so ensure proper
barriers to prevent optimizing to a stale state. Normally it isn't a
problem to observe the wrong state as it is merely advisory to take a
quicker path during initialization and error recovery, but seeing an old
state can report unexpected ENETRESET errors when a reset request was in
fact successful.

Reported-by: Minh Hoang <mh2022@meta.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
2023-12-04 08:39:03 -08:00
Keith Busch
5c687c287c nvme: introduce helper function to get ctrl state
The controller state is typically written by another CPU, so reading it
should ensure no optimizations are taken. This is a repeated pattern in
the driver, so start with adding a convenience function that returns the
controller state with READ_ONCE().

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04 08:39:03 -08:00
Srinivas Kandagatla
716d4e5373
ASoC: qcom: sc8280xp: Limit speaker digital volumes
Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04 16:20:26 +00:00
Srinivas Kandagatla
fb9ad24485
ASoC: ops: add correct range check for limiting volume
Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04 16:20:25 +00:00
Sebastian Parschauer
31e5252326 HID: Add quirk for Labtec/ODDOR/aikeec handbrake
This device needs ALWAYS_POLL quirk, otherwise it keeps reconnecting
indefinitely. It is a handbrake for sim racing detected as joystick.
Reported and tested by GitHub user N0th1ngM4tt3rs.

Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-04 16:21:05 +01:00
Hans de Goede
4de77156a2 drm/i915/dsi: Use devm_gpiod_get() for all GPIOs
soc_gpio_set_value() already uses devm_gpiod_get(), lets be consistent
and use devm_gpiod_get() for all GPIOs.

This allows removing the intel_dsi_vbt_gpio_cleanup() function,
which only function was to put the GPIO-descriptors.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231201161130.23976-1-hdegoede@redhat.com
2023-12-04 16:17:23 +01:00
Mario Limonciello
a9f68ffe11 HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[]
Users have reported problems with recent Lenovo laptops that contain
an IDEA5002 I2C HID device. Reports include fans turning on and
running even at idle and spurious wakeups from suspend.

Presumably in the Windows ecosystem there is an application that
uses the HID device. Maybe that puts it into a lower power state so
it doesn't cause spurious events.

This device doesn't serve any functional purpose in Linux as nothing
interacts with it so blacklist it from being probed. This will
prevent the GPIO driver from setting up the GPIO and the spurious
interrupts and wake events will not occur.

Cc: stable@vger.kernel.org # 6.1
Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-04 16:17:12 +01:00
Colin Ian King
153de60e8b selftests/bpf: Fix spelling mistake "get_signaure_size" -> "get_signature_size"
There is a spelling mistake in an ASSERT_GT message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231204093940.2611954-1-colin.i.king@gmail.com
2023-12-04 15:59:42 +01:00
Andrei Matei
5bd90cdc65 bpf: Minor logging improvement
One place where we were logging a register was only logging the variable
part, not also the fixed part.

Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231204011248.2040084-1-andreimatei1@gmail.com
2023-12-04 15:57:27 +01:00
Mario Limonciello
2fff0b5e1a pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend
If a pin isn't marked as a wake source processing any interrupts is
just going to destroy battery life.  The APU may wake up from a hardware
sleep state to process the interrupt but not return control to the OS.

Mask interrupt for all non-wake source pins at suspend. They'll be
re-enabled at resume.

Reported-and-tested-by: Marcus Aram <marcus+oss@oxar.nl>
Reported-and-tested-by: Mark Herbert <mark.herbert42@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2812
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231203032431.30277-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-04 15:46:02 +01:00
Stefan Hajnoczi
b8e0792449 virtio_blk: fix snprintf truncation compiler warning
Commit 4e04005256 ("virtio-blk: support polling I/O") triggers the
following gcc 13 W=1 warnings:

drivers/block/virtio_blk.c: In function ‘init_vq’:
drivers/block/virtio_blk.c:1077:68: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Wformat-truncation=]
 1077 |                 snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
      |                                                                    ^~
drivers/block/virtio_blk.c:1077:58: note: directive argument in the range [-2147483648, 65534]
 1077 |                 snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
      |                                                          ^~~~~~~~~~~~~
drivers/block/virtio_blk.c:1077:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
 1077 |                 snprintf(vblk->vqs[i].name, VQ_NAME_LEN, "req_poll.%d", i);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is a false positive because the lower bound -2147483648 is
incorrect. The true range of i is [0, num_vqs - 1] where 0 < num_vqs <
65536.

The code mixes int, unsigned short, and unsigned int types in addition
to using "%d" for an unsigned value. Use unsigned short and "%u"
consistently to solve the compiler warning.

Cc: Suwan Kim <suwan.kim027@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312041509.DIyvEt9h-lkp@intel.com/
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204140743.1487843-1-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-04 09:43:53 -05:00
Dan Carpenter
35ddd61cf0 platform/x86: x86-android-tablets: Fix an IS_ERR() vs NULL check in probe
The spi_new_device() function returns NULL on error, it doesn't return
error pointers.

Fixes: 70505ea6de ("platform/x86: x86-android-tablets: Add support for SPI device instantiation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/4b1b2395-c7c5-44a4-b0b0-6d091c7f46a2@moroto.mountain
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 15:42:15 +01:00
Marek Vasut
8c82e9e376 dt-bindings: iio: light: isl76682: Document ISL76682
The ISL76682 is very basic ALS which only supports ALS or IR mode
in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any
other fancy functionality. Document it as trivial device.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231127212726.77707-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04 14:33:19 +00:00
Krzysztof Kozlowski
253bad7f04 dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: add X1E80100 LPASS LPI
Document the Qualcomm X1E80100 SoC Low Power Audio SubSystem Low Power
Island (LPASS LPI) pin controller, compatible with earlier SM8550 model.

Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231129155738.167030-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-04 15:32:42 +01:00
Thomas Richard
e24b623d95 pinctrl: pinctrl-single: add ti,j7200-padconf compatible
On j7200, during suspend to ram pinctrl contexts are lost. To save and
restore contexts during suspend/resume, the flag PCS_CONTEXT_LOSS_OFF
shall be set.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-2-704e7dc24460@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-04 15:32:42 +01:00
Thomas Richard
aa587ff2ab dt-bindings: pinctrl: pinctrl-single: add ti,j7200-padconf compatible
Add the "ti,j7200-padconf" compatible to support suspend to ram on
j7200.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-1-704e7dc24460@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-04 15:32:42 +01:00
Richard Acayan
27030ff787 pinctrl: qcom: fail to retrieve configuration from invalid pin groups
The pinconf-groups debugfs file dumps each valid configuration item of
all pin groups. Some platforms and devices may have pin groups which
cannot be accessed, according to commit 691bf5d5a7 ("pinctrl: qcom:
Don't allow protected pins to be requested"). Fail for each
configuration item of an invalid pin group by checking the GPIO chip's
valid mask.

The validity of the pin group cannot be checked in the generic pinconf
dump (function "pinconf_generic_dump_one"), as it does not directly
interact with the gpiochip or the pinmux callbacks (which would give it
access to the request callback). Instead, an entry contains the ID and
name of the pingroup with no properties when all items fail.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231128020202.728156-3-mailingradian@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-04 15:32:42 +01:00
Andy Shevchenko
142173c4ad pinctrl: mediatek: Switch to use no-IRQ PM helpers
Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231122144744.2222207-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-04 15:32:42 +01:00
Andy Shevchenko
7cc4e6b0e4 pinctrl: Convert unsigned to unsigned int
Simple type conversion with no functional change implied.
While at it, adjust indentation where it makes sense.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231129161459.1002323-24-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-04 15:32:42 +01:00
Bin Li
6f7e4664e5 ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5
Lenovo M90 Gen5 is equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.

Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-04 15:23:53 +01:00
Aleksandrs Vinarskis
cd14dedf15 ALSA: hda/realtek: fix speakers on XPS 9530 (2023)
XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI
connected. For subwoofers to work, it requires both to enable amplifier
support, and to enable output to subwoofers via 0x17 quirk (similalry to
XPS 9510/9520).

Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231203233006.100558-1-alex.vinarskis@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-04 15:23:07 +01:00
Sarah Grant
bbb8e71965 ALSA: usb-audio: Add Pioneer DJM-450 mixer controls
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.

Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-04 15:22:14 +01:00
Dmitry Baryshkov
d0b3c318e0 drm/bridge: migrate bridge_chains to per-encoder file
Instead of having a single file with all bridge chains, list bridges
under a corresponding per-encoder debugfs directory.

While we are at it, also slightly improve the formatting of the bridge
data: split a single line entry into multiple lines, include the symbol
name of the bridge funcs and add the textual representation of the
bridge ops.

Example of the listing:

$ cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dsi_mgr_bridge_funcs
	type: [0] Unknown
	ops: [0]
bridge[1]: lt9611uxc_bridge_funcs
	type: [11] HDMI-A
	OF: /soc@0/geniqup@9c0000/i2c@994000/hdmi-bridge@2b:lontium,lt9611uxc
	ops: [7] detect edid hpd

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203115315.1306124-3-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Dmitry Baryshkov
caf525ed45 drm/encoder: register per-encoder debugfs dir
Each of connectors and CRTCs used by the DRM device provides debugfs
directory, which is used by several standard debugfs files and can
further be extended by the driver. Add such generic debugfs directories
for encoder.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203115315.1306124-2-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Dmitry Baryshkov
7d9f1b72b2 usb: typec: qcom-pmic-typec: switch to DRM_AUX_HPD_BRIDGE
Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
same functionality for the DRM bridge chain termination.

Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-7-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Dmitry Baryshkov
2bcca96abf soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE
Use the freshly defined DRM_AUX_HPD_BRIDGE instead of open-coding the
same functionality for the DRM bridge chain termination.

Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-6-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Dmitry Baryshkov
e560518a6c drm/bridge: implement generic DP HPD bridge
Several USB-C controllers implement a pretty simple DRM bridge which
implements just the HPD notification operations. Add special helper
for creating such simple bridges.

Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-5-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Dmitry Baryshkov
c5d296bad6 usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE
Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-4-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Dmitry Baryshkov
35921910bb phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE
Switch to using the new DRM_AUX_BRIDGE helper to create the
transparent DRM bridge device instead of handcoding corresponding
functionality.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-3-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Dmitry Baryshkov
2a04739139 drm/bridge: add transparent bridge helper
Define a helper for creating simple transparent bridges which serve the
only purpose of linking devices into the bridge chain up to the last
bridge representing the connector. This is especially useful for
DP/USB-C bridge chains, which can span across several devices, but do
not require any additional functionality from the intermediate bridges.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-2-dmitry.baryshkov@linaro.org
2023-12-04 16:07:29 +02:00
Javier Carrasco
3b82f43238 iio: light: add VEML6075 UVA and UVB light sensor driver
The Vishay VEMl6075 is a low power, 16-bit resolution UVA and UVB
light sensor with I2C interface and noise compensation (visible and
infrarred).

Every UV channel generates an output signal measured in counts per
integration period, where the integration time is configurable.

This driver adds support for both UV channels and the ultraviolet
index (UVI) inferred from them according to the device application note
with open-air (no teflon) coefficients.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-3-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04 13:57:25 +00:00
Javier Carrasco
249f27ac71 dt-bindings: iio: light: add support for Vishay VEML6075
The Vishay VEML6075 is a 16-bit digital UVA and UVB sensor with I2C
interface.

Add bindings and an example for the Vishay VEML6075.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-2-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04 13:57:24 +00:00
Javier Carrasco
b89710bd21 iio: add modifiers for A and B ultraviolet light
Currently there are only two modifiers for ultraviolet light: a generic
one for any ultraviolet light (IIO_MOD_LIGHT_UV) and one for deep
ultraviolet (IIO_MOD_LIGHT_DUV), which is also referred as ultraviolet
C (UV-C) band and covers short-wave ultraviolet.

There are still no modifiers for the long-wave and medium-wave
ultraviolet bands. These two bands are the main components used to
obtain the UV index on the Earth's surface.

Add modifiers for the ultraviolet A (UV-A) and ultraviolet B (UV-B)
bands.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231110-veml6075-v3-1-6ee46775b422@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04 13:57:24 +00:00
Marius Cristea
408d4b33c2 iio: adc: MCP3564: fix hardware identification logic
In mcp3564_config() fix the hardware identification logic
based on the hardware ID registers. Second part of the code was
disabled by an logic error.
Fix a typo related to the "MODULE_DESCRIPTION".

Fixes: 33ec3e5fc1 (iio: adc: adding support for MCP3564 ADC)
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20231129135619.63475-1-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04 13:54:10 +00:00
David E. Box
6e79648553 platform/x86/intel/pmc: Show Die C6 counter on Meteor Lake
Expose the Die C6 counter on Meteor Lake.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-21-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
David E. Box
3621df43b0 platform/x86/intel/pmc: Add debug attribute for Die C6 counter
Add a "die_c6_us_show" debugfs attribute.  Reads the counter value using
Intel Platform Monitoring Technology (PMT) driver API. This counter is
useful for determining the idle residency of CPUs in the compute tile.
Also adds a missing forward declaration for punit_ep which was declared in
an earlier upstream commit but only used for the first time in this one.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-20-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
Xi Pardee
935b8211a3 platform/x86/intel/pmc: Read low power mode requirements for MTL-M and MTL-P
Add support to read the low power mode requirements for Meteor Lake M and
Meteor Lake P.

Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-19-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
Xi Pardee
4d621c3f02 platform/x86/intel/pmc: Retrieve LPM information using Intel PMT
On supported platforms, the low power mode (LPM) requirements for entering
each idle substate are described in Platform Monitoring Technology (PMT)
telemetry entries. Provide a function for platform code to attempt to find
and read the requirements from the telemetry entries.

Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-18-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
Rajvi Jingar
0f601dec18 platform/x86/intel/pmc: Display LPM requirements for multiple PMCs
Update the substate_requirements attribute to display the requirements for
all the PMCs on a package.

Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-17-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
David E. Box
104f74943f platform/x86/intel/pmc: Find and register PMC telemetry entries
The PMC SSRAM device contains counters that are structured in Intel
Platform Monitoring Technology (PMT) telemetry regions. Look for and
register these telemetry regions from the driver so that they may be read
using the Intel PMT ABI.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-16-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
David E. Box
642dd26f58 platform/x86/intel/pmc/mtl: Use return value from pmc_core_ssram_init()
Instead of checking for a NULL regbase, use the return value from
pmc_core_ssram_init() to check if PMC discovery was successful. If not, use
the legacy enumeration method (which only works for the primary PMC).

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-15-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
David E. Box
a01486dc4b platform/x86/intel/pmc: Cleanup SSRAM discovery
Clean up the code handling SSRAM discovery. Handle all resource allocation
and cleanup in pmc_core_ssram_get_pmc(). Return the error status from this
function but only fail the init if we fail to discover the primary PMC.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-14-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
David E. Box
9512920a6b platform/x86/intel/pmc: Allow pmc_core_ssram_init to fail
Currently, if the PMC SSRAM initialization fails, no error is returned and
the only indication is that a PMC device has not been created.  Instead,
allow an error to be returned and handled directly by the caller.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-13-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
Xi Pardee
2e35e3aa9f platform/x86:intel/pmc: Call pmc_get_low_power_modes from platform init
In order to setup a table of low power mode requirements for Meteor Lake,
pmc_core_get_low_power_modes() will need to be run from platform init code
so that the enabled modes are known, allowing the use of the
pmc_for_each_mode helper. Make the function global and call it from the
platform init code.

Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-12-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00
David E. Box
416eeb2e1f platform/x86/intel/pmt: telemetry: Export API to read telemetry
Export symbols to allow access to Intel PMT Telemetry data on available
devices. Provides APIs to search, register, and read telemetry using a
kref managed pointer that serves as a handle to a telemetry endpoint.
To simplify searching for present devices, have the IDA start at 1
instead of 0 so that 0 can be used to indicate end of search.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129222132.2331261-11-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-04 14:53:43 +01:00