The RB1 platform doesn't have board-specific board-id programmed, it uses
generic 0xff. Thus add the property with the 'variant' of the
calibration data.
Note: the driver will check for the calibration data for the following
IDs, so existing board-2.bin files will continue to work.
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1'
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120'
- 'bus=snoc,qmi-board-id=ff'
For the reference, the board is identified by the driver in the
following way:
ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1
ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-12-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the required nodes to support display output via the HDMI port.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-10-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MDSS, aside from the MDP-MEM path, also requires the CPU-DISP_CFG one.
Failing to provide it may result in register accesses failing and that's
never good.
Add the missing path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-7-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MDSS, aside from the MDP-MEM path, also requires the CPU-DISP_CFG one.
Failing to provide it may result in register accesses failing and that's
never good.
Add the missing path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-6-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The stats can be expanded by poking the Always-On Subsystem through QMP.
Allow passing a QMP handle for configurations that support it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-ddr_sleep_stats-v1-1-5981c2e764b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add type-c node to feature otg function and set usb-role-switch property
for usb_1_dwc3 to enable usb otg.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231126022849.14273-2-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are two typos in this dtsi, so fix it.
classis -> chassis.
80700000 -> 80600000
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Link: https://lore.kernel.org/r/20231126022849.14273-1-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Consider an object near to the sensor when their distance is about 4 cm
or below.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20231126-bqm5_prox-v2-1-b7defc3979ac@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the QCA bluetooth on RB2. It identifies like the following:
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40020150
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x01500201
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231120-topic-rb2_bt-v2-2-4bbf266258ef@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This link got broken by commit e790a4ce52 ("arm: docs: Move Arm
documentation to Documentation/arch/") when the doc moved from arm/ to
arch/arm/. Fix the link so that it can continue to be followed.
Fixes: e790a4ce52 ("arm: docs: Move Arm documentation to Documentation/arch/")
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20231129030443.2753833-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add DTS for Qualcomm qcs6490-rb3gen2 board which uses
QCS6490 SoC. This adds debug uart and usb support along
with regulators found on this board.
Co-developed-by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-4-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add DTS for Qualcomm IDP platform using QCM6490 SoC.
This adds debug uart, eMMC and usb support along with
regulators found on this board.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the qcom,qcm6490-idp and qcs6490-rb3gen2 boards.
qcm6490-idp based off qcm6490 SoC derived from sc7280 meant for
various form factor including IoT and qcs6490-rb3gen2 based off
qcs6490 SoC derivative of qcm6490 without internal modem.
Co-developed by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some gpios are reserved for other subsystems, so mark these reserved
gpios.
Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129103325.24854-6-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add uart support for QRD4450 for enable uart console.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-5-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add base description of UART and TLMM nodes which helps SM4450
boot to shell with console on boards with this SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-4-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to
find them by matching globaly by name.
If not passed directly, driver maintains backwards compatibility by then
falling back to global lookup.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231013164025.3541606-2-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QMP PCI PHY PIPE clocks are inputs for the GCC clock controller.
In order to describe this in DTS, allow passing them as the inputs to GCC.
This has a benefit that it avoids doing a global matching by name.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013164025.3541606-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the thermals for the QUIET_THERM, CAM_FLASH_THERM, MSM_THERM
and RFC_CAM_THERM thermistors connected to PM7325.
With this PMIC the software communication to the ADC is going through
PMK7325 (= PMK8350).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-4-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the defines for the ADC channels found on the PM7325. The list is
taken from downstream msm-5.4 and adjusted for mainline.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-1-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[mani: Splitted pd change and used rpmhpd_opp_low_svs]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ bootloaders do not need these information to select the
the DTB blob. So dropping the board names from board section.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230927093130.4098385-1-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the APCS, A53 PLL, cpu-opp-table nodes to set
the CPU frequency at 800MHz (idle) or 1.008GHz.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230925102826.405446-4-quic_gokulsri@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Node names should not have vendor prefixes:
qcom-sdx65-mtp.dtb: qcom,spmi@c440000: $nodename:0: 'qcom,spmi@c440000' does not match '^spmi@.*
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183103.49487-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SDX65 GCC clock controller expects two required clocks:
pcie_pipe_clk and usb3_phy_wrapper_gcc_usb30_pipe_clk. The first one is
provided by existing phy node, but second is not yet implemented.
qcom-sdx65-mtp.dtb: clock-controller@100000: clocks: [[11, 0], [11, 1], [12]] is too short
qcom-sdx65-mtp.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk'] is too short
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230924183103.49487-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This helper has been introduced to avoid programmer errors (missing
_put calls leading to dangling refcnt) when using pm_runtime_get, use it.
While at it, start checking the return value.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 5c82902844 ("drm/msm/dsi: Split PHY drivers to separate files")
Patchwork: https://patchwork.freedesktop.org/patch/543350/
Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-1-a11a751f34f0@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Similar to SC8280XP, the misconfigured SAFE logic causes rather
significant delays in __arm_smmu_tlb_sync(), resulting in poor
performance for things such as USB.
Introduce appropriate SAFE values for SC8180X to correct this.
Fixes: f3af2d6ee9 ("drm/msm/dpu: Add SC8180x to hw catalog")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reported-by: Anton Bambura <jenneron@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/569840/
Link: https://lore.kernel.org/r/20231130-sc8180x-dpu-safe-lut-v1-1-a8a6bbac36b8@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The UBWC settings need to match between the display and GPU. When we
updated the GPU settings, we forgot to make the corresponding update on
the display side.
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 07e6de738a ("drm/msm/a690: Fix reg values for a690")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/569817/
Link: https://lore.kernel.org/r/20231130192119.32538-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently eDP population is done at msm_dp_modeset_init() which happen
at binding time. Move eDP population to be done at display probe time
so that probe deferral cases can be handled effectively.
wait_for_hpd_asserted callback is added during drm_dp_aux_init()
to ensure eDP's HPD is up before proceeding eDP population.
Changes in v5:
-- inline dp_display_auxbus_population() and delete it
Changes in v4:
-- delete duplicate initialize code to dp_aux before drm_dp_aux_register()
-- delete of_get_child_by_name(dev->of_node, "aux-bus") and inline the
function
-- not initialize rc = 0
Changes in v3:
-- add done_probing callback into devm_of_dp_aux_populate_bus()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570074/
Link: https://lore.kernel.org/r/1701472789-25951-8-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
EV_HPD_INIT_SETUP flag is used to trigger the initialization of external
DP host controller. Since external DP host controller initialization had
been incorporated into pm_runtime_resume(), this flag became obsolete.
msm_dp_irq_postinstall() which triggers EV_HPD_INIT_SETUP event is
obsoleted accordingly.
Changes in v4:
-- reworded commit text
-- drop EV_HPD_INIT_SETUP
-- drop msm_dp_irq_postinstall()
Changes in v3:
-- drop EV_HPD_INIT_SETUP and msm_dp_irq_postinstall()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570075/
Link: https://lore.kernel.org/r/1701472789-25951-7-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently DP driver is executed independent of PM runtime framework.
This leads msm eDP panel can not being detected by edp_panel driver
during generic_edp_panel_probe() due to AUX DPCD read failed at
edp panel driver. Incorporate PM runtime framework into DP driver so
that host controller's power and clocks are enable/disable through
PM runtime mechanism. Once PM runtime framework is incorporated into
DP driver, waking up device from power up path is not necessary. Hence
remove it.
After incorporating pm_runtime framework into eDP/DP driver,
dp_pm_suspend() to handle power off both DP phy and controller during
suspend and dp_pm_resume() to handle power on both DP phy and controller
during resume are not necessary. Therefore both dp_pm_suspend() and
dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and
dp_pm_runtime_resume() respectively.
Changes in v9:
-- silent compiler warning message at dp_power_init() and dp_power_deinit()
with W1 flag
Changes in v7:
-- add comments to dp_pm_runtime_resume()
-- add comments to dp_bridge_hpd_enable()
-- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify()
Changes in v6:
-- delete dp_power_client_deinit(dp->power);
-- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle()
-- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle()
-- add IRQF_NO_AUTOEN to devm_request_irq()
-- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend()
-- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable()
Changes in v5:
-- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync()
-- squash add pm_runtime_force_suspend()/resume() patch into this patch
Changes in v4:
-- reworded commit text to explain why pm_framework is required for
edp panel
-- reworded commit text to explain autosuspend is choiced
-- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3
-- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3
-- return value from pm_runtime_resume_and_get() directly
-- check return value of devm_pm_runtime_enable()
-- delete pm_runtime_xxx from dp_display_remove()
-- drop dp_display_host_init() from EV_HPD_INIT_SETUP
-- drop both dp_pm_prepare() and dp_pm_compete() from this change
-- delete ST_SUSPENDED state
-- rewording commit text to add more details regrading the purpose
of this change
Changes in v3:
-- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch
-- use pm_runtime_resume_and_get() instead of pm_runtime_get()
-- error checking pm_runtime_resume_and_get() return value
-- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case
-- replace dp_pm_suspend() with pm_runtime_force_suspend()
-- replace dp_pm_resume() with pm_runtime_force_resume()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570073/
Link: https://lore.kernel.org/r/1701472789-25951-6-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Original both parser->parse() and dp_power_client_init() are done at
dp_display_bind() since eDP population is done at binding time.
In the preparation of having eDP population done at probe() time,
move both function from dp_display_bind() to dp_display_probe().
Changes in v6:
-- move dp_power_client_deinit() to remove()
Changes in v5:
-- explain why parser->parse() and dp_power_client_init() are moved to
probe time
-- tear down sub modules if failed
Changes in v4:
-- split this patch out of "incorporate pm_runtime framework into DP
driver" patch
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/570065/
Link: https://lore.kernel.org/r/1701472789-25951-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>