There are two genpd (as required-opp) cases that we need to handle,
devices with a single genpd and ones with multiple genpds.
The multiple genpds case is clear, where the OPP core calls
dev_pm_domain_attach_by_name() for them and uses the virtual devices
returned by this helper to call dev_pm_domain_set_performance_state()
later to change the performance state.
The single genpd case however requires special handling as we need to
use the same `dev` structure (instead of a virtual one provided by genpd
core) for setting the performance state via
dev_pm_domain_set_performance_state().
As we move towards more generic code to take care of the required OPPs,
where we will recursively call dev_pm_opp_set_opp() for all the required
OPPs, the above special case becomes a problem.
It doesn't make sense for a device's DT entry to have both "opp-level"
and single "required-opps" entry pointing to a genpd's OPP, as that
would make the OPP core call dev_pm_domain_set_performance_state() for
two different values for the same device structure. And so we can reuse
the 'opp->level" field in such a case and call _set_opp_level() for the
device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The level zero can be used by some OPPs to drop performance state vote
for the device. It is perfectly fine to allow the same.
_set_opp_level() considers it as an invalid value currently and returns
early.
In order to support this properly, initialize the level field with
U32_MAX, which denotes unused level field.
Reported-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Edgeble AI 6TOPS board topology is now changed in final revisions
as a compatible IO board, NCM6A-IO, is made available for both
variants of SoM: NCM6A and NCM6B.
With this change, 6b-io is not as available and 6a; 6b SoM's have
the same compatible IO board as 6a-io. This change is due to the
common optimised design of the IO board made available now in
final revisions, which was not the case in initial revisions.
So, use the NCM6A-IO compatible for NCM6B SoM based IO dts.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231125142914.57459-2-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Current binding has following compatible combination for SoM, IO board
- NCM6A: edgeble,neural-compute-module-6a,
edgeble,neural-compute-module-6a-io
- NCM6B: edgeble,neural-compute-module-6b,
edgeble,neural-compute-module-6b-io
This board topology now changes in final revisions, so a common
compatible IO board, NCM6A-IO, is made available for both variants
of SoM: NCM6A and NCM6B, produced by Edgeble AI.
With this change, 6b-io is not as available and 6a; 6b SoM's have the
same compatible IO board as 6a-io. This change is due to the common
optimised design of the IO board made available now in final revisions,
which was not the case in initial revisions.
Update the dt-bindings with this new change.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231125142914.57459-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
bus->params.max_dr_freq is calculated and set in sdw_bus_master_add().
We can use it directly instead of calculating it again.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20231127124405.2080431-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Start from ACE1.x, DOAISE is added to AC timing control
register bit 5, it combines with DOAIS to get effective
timing, and has the default value 1.
The current code fills DOAIS, DACTQE and DODS bits to a
variable initialized to zero, and updates the variable
to AC timing control register. With this operation, We
change DOAISE to 0, and force a much more aggressive
timing. The timing is even unable to form a working
waveform on SDA pin.
This patch uses read-modify-write operation for the AC
timing control register access, thus makes sure those
bits not supposed and intended to change are not touched.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231127124735.2080562-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Motorola mapphone tablets are similar to the mapphone phones, but with
different display and without some phone related peripherals.
Let's add a new motorola-mapphone-mz607-mz617.dtsi and basic files for
xyboard mz609 and mz617. All the tablets from mz607 to mz617 are quite
similar so let's use motorola-mapphone-mz607-mz617.dtsi naming for the
common file.
Note that the tc358765 lcd bridge needs driver changes before it can be
added.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The mapphone tablets do not have same peripherals as the mapphone
handsets. Let's move the handset specific devices into a common
motorola-mapphone-handset.dtsi file.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The LCD regulator and backlight are specific only to droid bionic xt875
and droid4 xt894. On droid razr xt910 and xt912, the LCD regulator and
backlight are different. The LCD and backlight are also different on the
the mz609 tablets.
Let's add a common motorola-mapphone-xt8xx.dtsi to make it easy to add
support for xt910 and xt912 and the mz609 to mz617 tablets.
While at it, let's also move aliases to the board specific dts files where
they belong. And let's move the omap4-droid4-xt894.dts compatible to the
top.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Let's add compatibles for some xyboard tablets, these are similar to
the mapphone devices already listed but with different peripherals.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A loop in rvu_mbox_handler_nix_bandprof_free() contains
a break if (idx == MAX_BANDPROF_PER_PFFUNC),
but if idx may reach MAX_BANDPROF_PER_PFFUNC
buffer '(*req->prof_idx)[layer]' overflow happens before that check.
The patch moves the break to the
beginning of the loop.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e8e095b3b3 ("octeontx2-af: cn10k: Bandwidth profiles config support").
Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but
used with the (more) correct name sclk_sdmmc. SD card tuning does currently
fail as the parent can't be found under that name.
There is no need to suffix the name with '0' since RK312x SoCs do have a
single sdmmc controller - so rename it to the name which is already used
by it's children.
Fixes: f6022e88fa ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.
Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.
Fixes: f6022e88fa ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add missing space in compatible property and align style with rest of
the file.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231125233327.238575-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing space in compatible property and align style with rest of
the file.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231125233242.237660-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
If bus is marked as multi_link, but number of masters in the stream is
not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >=
bus->hw_sync_min_links), bank switching should not happen. The first
part of do_bank_switch() code properly takes these conditions into
account, but second part (sdw_ml_sync_bank_switch()) relies purely on
bus->multi_link property. This is not balanced and leads to NULL
pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
wait_for_completion_timeout+0x124/0x1f0
do_bank_switch+0x370/0x6f8
sdw_prepare_stream+0x2d0/0x438
qcom_snd_sdw_prepare+0xa0/0x118
sm8450_snd_prepare+0x128/0x148
snd_soc_link_prepare+0x5c/0xe8
__soc_pcm_prepare+0x28/0x1ec
dpcm_be_dai_prepare+0x1e0/0x2c0
dpcm_fe_dai_prepare+0x108/0x28c
snd_pcm_do_prepare+0x44/0x68
snd_pcm_action_single+0x54/0xc0
snd_pcm_action_nonatomic+0xe4/0xec
snd_pcm_prepare+0xc4/0x114
snd_pcm_common_ioctl+0x1154/0x1cc0
snd_pcm_ioctl+0x54/0x74
Fixes: ce6e74d008 ("soundwire: Add support for multi link bank switch")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
From Yu Kuai:
md: remove rcu protection to access rdev from conf
The lifetime of rdev:
1. md_import_device() generate a rdev based on underlying disk;
mddev_lock()
rdev = kzalloc();
rdev->bdev = blkdev_get_by_dev();
mddev_unlock()
2. bind_rdev_to_array() add this rdev to mddev->disks;
mddev_lock()
kobject_add(&rdev->kobj, &mddev->kobj, ...);
list_add_rcu(&rdev->same_set, &mddev->disks);
mddev_unlock()
3. remove_and_add_spares() add this rdev to conf;
mddev_lock()
rdev_addable();
pers->hot_add_disk();
rcu_assign_pointer(conf->rdev, rdev);
mddev_unlock()
4. Use this array with rdev;
5. remove_and_add_spares() remove rdev from conf;
// triggered by sysfs/ioctl
mddev_lock()
rdev_removeable();
pers->hot_remove_disk();
rcu_assign_pointer(conf->rdev, NULL);
synchronize_rcu();
mddev_unlock()
// triggered by daemon
mddev_lock()
rdev_removeable();
synchronize_rcu(); -> this can't protect accessing rdev from conf
pers->hot_remove_disk();
rcu_assign_pointer(conf->rdev, NULL);
mddev_unlock()
6. md_kick_rdev_from_array() remove rdev from mddev->disks;
mddev_lock()
list_del_rcu(&rdev->same_set);
synchronize_rcu();
list_add(&rdev->same_set, &mddev->deleting)
mddev_unlock()
export_rdev
There are two separate rcu protection for rdev, and this pathset remove
the protection of conf(step 3 and 5), because it's safe to access rdev
from conf in following cases:
- If 'reconfig_mutex' is held, because rdev can't be added or rmoved to
conf;
- If there is normal IO inflight, because mddev_suspend() will wait for
IO to be done and prevent rdev to be added or removed to conf;
- If sync thread is running, because remove_and_add_spares() can only be
called from daemon thread when sync thread is done, and
'MD_RECOVERY_RUNNING' is also checked for ioctl/sysfs;
- if any spinlock or rcu_read_lock() is held, because synchronize_rcu()
from step 6 prevent rdev to be freed until spinlock is released or
rcu_read_unlock();
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
* extend support for scanning while Multi-Link Operation (MLO) connected
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmVk2JkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtD4gf7B8eR+lq6+5Qg7ObiURTci/WYlDo3prz4
R7hDmuHI5S3AJIRXF87fmC1iThIigi6dri1akRdRo3UvNr9gBTRpDGHnALuDPxOp
p8MpsG1gPNhMo0aNFfX5RDaGkfKqZQMT3er3ELG4B+k4q0glNWud07D2/0t1zSt9
rag3vlFVPRzcCz2T/Xv/nXXWaiIaQx0RLHrQshbxg0Glu+m/l3/ACBrirMiWami4
nr4SX717yckqwRElH0l5fSmCbylTDCTslo4UnpVKusxTtt1f3RxFZvsxvRgI5O9q
LEYsMtjNj2Ea3uLb0DvSNY640O/dqbRSm0PjwYxPwlmrtQB/6GMx8g==
=a+Xs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
- extend support for scanning while Multi-Link Operation (MLO) connected
* tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits)
wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event
wifi: mac80211: Extend support for scanning while MLO connected
wifi: cfg80211: Extend support for scanning while MLO connected
wifi: ieee80211: fix PV1 frame control field name
rfkill: return ENOTTY on invalid ioctl
MAINTAINERS: update iwlwifi maintainers
wifi: rtw89: 8922a: read efuse content from physical map
wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map
wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels
wifi: rtw89: mac: add to access efuse for WiFi 7 chips
wifi: rtw89: mac: use mac_gen pointer to access about efuse
wifi: rtw89: 8922a: add 8922A basic chip info
wifi: rtlwifi: drop unused const_amdpci_aspm
wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable
wifi: rtw89: regd: update regulatory map to R65-R44
wifi: rtw89: regd: handle policy of 6 GHz according to BIOS
wifi: rtw89: acpi: process 6 GHz band policy from DSM
wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start()
wifi: rtw89: pci: update interrupt mitigation register for 8922AE
wifi: rtw89: pci: correct interrupt mitigation register for 8852CE
...
====================
Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rpm-pkg and deb-pkg targets have transitioned to using 'git archive'
for tarball creation.
Although the old cmd_src_tar is still used by snap-pkg, there is no need
to pack and unpack a tarball solely for passing the source to snapcraft.
Instead, you can use 'source-type: local' to tell the source location to
snapcraft.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is done for the same reasons as 4243afdb93 does it for builddeb:
always runs make modules to install modules.builtin* files, which are
needed for e.g. initramfs-tools or LTP testing tool.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The shell variable $dirs is not used any more since 1fc9095846
("kbuild: tar-pkg: use tar rules in scripts/Makefile.package"),
therefore remove it".
Fixes: 1fc9095846 ("kbuild: tar-pkg: use tar rules in scripts/Makefile.package")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Make the while-loop code a little more readable.
The gain is that "CONFIG_FOO" without '=' is warned as unexpected data.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, any string starting "is not set" disables a CONFIG option.
For example, "# CONFIG_FOO is not settled down" is accepted as valid
input, functioning the same as "# CONFIG_FOO is not set". It is a
long-standing oddity.
Check the line against the exact pattern "is not set".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, newline characters are stripped away in multiple places
on the caller.
Doing that in the callee is helpful for further cleanups.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kconfig accepts both "# CONFIG_FOO is not set" and "CONFIG_FOO=n" as
a valid input, but conf_read_simple() duplicates similar code to handle
them. Factor out the common code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'else' arm here is unreachable in practical use cases.
include/config/auto.conf does not include "# CONFIG_... is not set"
line unless it is manually hacked.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, when an input line starts with '#', (line + 2) is passed to
memcmp() without checking line[1].
It means that line[1] can be any arbitrary character. For example,
"#KCONFIG_FOO is not set" is accepted as valid input, functioning the
same as "# CONFIG_FOO is not set".
More importantly, this can potentially lead to a buffer overrun if
line[1] == '\0'. It occurs if the input only contains '#', as
(line + 2) points to an uninitialized buffer.
Check line[1], and skip the line if it is not a space.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
xrealloc() never returns NULL as it is checked in the callee.
This is a left-over of commit d717f24d8c ("kconfig: add xrealloc()
helper").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The long version --rules-file and --jobs are available since 1.18.8
while their short analogues -R and -j have been added since 1.14.7.
The option --rules-file the way it works currently was introduced in the
commit 5cd52673aabdf5eaa58181972119a41041fc85f2 of dpkg dated 23.07.18
with the following changelog entry:
* Fix dpkg-buildpackage option --rules-file parsing. It was trying to parse
it as --rules-target, which due to the ordering was a no-op.
The current behavior of the long version --rules-file is guaranteed to
be in use starting 1.19.1 and might cause build failures for some
versions newer than 1.18.8 even in spite of being documented that way.
Signed-off-by: Dmitrii Bundin <dmitrii.bundin.a@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a user-supplied value is out of range, (NEW) and an incorrect default
value are shown.
[Test Kconfig]
config FOO
int "foo"
range 10 20
[Test .config]
CONFIG_FOO=30
[Result without this fix]
$ make config
*
* Main menu
*
foo (FOO) [10] (NEW)
[Result with this fix]
$ make config
*
* Main menu
*
foo (FOO) [20]
Currently, the SYMBOL_DEF_USER is cleared if the user input does not
reside within the range. Kconfig forgets the initial value 30, and
prints (NEW) and an incorrect default [10].
Kconfig should remember the user's input. The default should be [20]
because the user's input, 30, is closer to the upper limit of the range.
Please note it will not show up in "make oldconfig" because it is no
longer considered as a new symbol. It also fixes the inconsistent
behavior in listnewconfig/helpnewconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
getopt_long() is used by various tools in the kernel (e.g. Kconfig).
It should be fine to use it all the time.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 74d9317161 ("genksyms: remove symbol prefix support") removed
the -s (--symbol-prefix) option.
Clean up the left-over.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pedro Tammela says:
====================
selftests: tc-testing: updates and cleanups for tdc
Address the recommendations from the previous series and cleanup some
leftovers.
====================
Link: https://lore.kernel.org/r/20231124154248.315470-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove this leftover from the times we pre-allocated everything
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231124154248.315470-6-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cleanup net namespaces and other resources if we get a SIGINT (Ctrl-C).
As user visible resources are allocated on a per test basis, it's only
required to catch this condition when (possibly) running tests.
So far calling post_suite is enough to free up anything that might
linger.
A missing keyword replacement for nsPlugin is also included.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231124154248.315470-5-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As suggested by Simon, prefix the functions that operate on iproute2
commands in contrast with the "nl" netlink prefix.
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231124154248.315470-4-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This operation is redundant and it's not stabilizing nor waiting
for anything.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231124154248.315470-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As tdc only tests loading/deleting and anything more complicated is
better left to the ebpf test suite, provide a pre-compiled version of
'action.c' and don't bother compiling it in kselftests or on the fly
at all.
Cc: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231124154248.315470-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn says:
====================
selftests/net: fix a few small compiler warnings
Observed a clang warning when backporting cmsg_sender.
Ran the same build against all the .c files under selftests/net.
This is clang-14 with -Wall
Which is what tools/testing/selftests/net/Makefile also enables.
====================
Link: https://lore.kernel.org/r/20231124171645.1011043-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same init_rng() in both tests. The function reads /dev/urandom to
initialize srand(). In case of failure, it falls back onto the
entropy in the uninitialized variable. Not sure if this is on purpose.
But failure reading urandom should be rare, so just fail hard. While
at it, convert to getrandom(). Which man 4 random suggests is simpler
and more robust.
mptcp_inq.c:525:6:
mptcp_connect.c:1131:6:
error: variable 'foo' is used uninitialized
whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Fixes: b51880568f ("selftests: mptcp: add inq test case")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
When input is randomized because this is expected to meaningfully
explore edge cases, should we also add
1. logging the random seed to stdout and
2. adding a command line argument to replay from a specific seed
I can do this in net-next, if authors find it useful in this case.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signedness of char is signed on x86_64, but unsigned on arm64.
Fix the warning building cmsg_sender.c on signed platforms or
forced with -fsigned-char:
msg_sender.c:455:12:
error: implicit conversion from 'int' to 'char'
changes value from 128 to -128
[-Werror,-Wconstant-conversion]
buf[0] = ICMPV6_ECHO_REQUEST;
constant ICMPV6_ECHO_REQUEST is 128.
Link: https://lwn.net/Articles/911914
Fixes: de17e305a8 ("selftests: net: cmsg_sender: support icmp and raw sockets")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>