EOPNOTSUPP is more situable than EINVAL for allocating XRCD while XRC
is not supported and unsupported resizing SRQ.
Fixes: 32548870d4 ("RDMA/hns: Add support for XRC on HIP09")
Fixes: 221109e643 ("RDMA/hns: Add interception for resizing SRQs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231114123449.1106162-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add interrupt support for ethernet phy subnode.
Add PB8 definition to macb0 pinctrl.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20231109131149.46397-3-mihai.sain@microchip.com
[claudiu.beznea: s/at91/microchip in commit title to match dts directory]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add interrupt support for ethernet phy subnode.
Add PB8 definition to macb0 pinctrl.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Link: https://lore.kernel.org/r/20231109131149.46397-2-mihai.sain@microchip.com
[claudiu.beznea: s/at91/microchip in commit title to match dts directory]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
In non secure mode, soc_pm.data.mode is set when entering pm in
at91_pm_begin(). This value is used (not only) to determine if the system
is going into slow clock mode (at91_suspend_entering_slow_clock()). This
function is called from various drivers to check this and act accordingly.
If not set, the driver might enter an incorrect suspend mode. When using
secure suspend mode, at91_pm_begin() is not called and thus
soc_pm.data.mode is not set. Since when using secure suspend, only one
suspend mode is supported, set this value directly in
at91_pm_secure_init().
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20231020130219.1255937-1-thomas.perrot@bootlin.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
When the cred was explicit passed through to aa_may_ptrace() the
kernel-doc comment was not properly updated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040508.AUhi04RY-lkp@intel.com/
Signed-off-by: John Johansen <john.johansen@canonical.com>
With the conversion to a refcounted pdb the nulldfa is now only used
in security/apparmor/lsm.c so declar it as static.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311092038.lqfYnvmf-lkp@intel.com/
Signed-off-by: John Johansen <john.johansen@canonical.com>
sha1 is insecure and has colisions, thus it is not useful for even
lightweight policy hash checks. Switch to sha256, which on modern
hardware is fast enough.
Separately as per NIST Policy on Hash Functions, sha1 usage must be
withdrawn by 2030. This config option currently is one of many that
holds up sha1 usage.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
if a PF has 256 or more VFs, ip link command will allocate an order 3
memory or more, and maybe trigger OOM due to memory fragment,
the VFs needed memory size is computed in rtnl_vfinfo_size.
so introduce nlmsg_new_large which calls netlink_alloc_large_skb in
which vmalloc is used for large memory, to avoid the failure of
allocating memory
ip invoked oom-killer: gfp_mask=0xc2cc0(GFP_KERNEL|__GFP_NOWARN|\
__GFP_COMP|__GFP_NOMEMALLOC), order=3, oom_score_adj=0
CPU: 74 PID: 204414 Comm: ip Kdump: loaded Tainted: P OE
Call Trace:
dump_stack+0x57/0x6a
dump_header+0x4a/0x210
oom_kill_process+0xe4/0x140
out_of_memory+0x3e8/0x790
__alloc_pages_slowpath.constprop.116+0x953/0xc50
__alloc_pages_nodemask+0x2af/0x310
kmalloc_large_node+0x38/0xf0
__kmalloc_node_track_caller+0x417/0x4d0
__kmalloc_reserve.isra.61+0x2e/0x80
__alloc_skb+0x82/0x1c0
rtnl_getlink+0x24f/0x370
rtnetlink_rcv_msg+0x12c/0x350
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1b2/0x280
netlink_sendmsg+0x355/0x4a0
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1ea/0x250
___sys_sendmsg+0x88/0xd0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f95a65a5b70
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20231115120108.3711-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: one by one port representors creation
Michal Swiatkowski says:
Currently ice supports creating port representors only for VFs. For that
use case they can be created and removed in one step.
This patchset is refactoring current flow to support port representor
creation also for subfunctions and SIOV. In this case port representors
need to be created and removed one by one. Also, they can be added and
removed while other port representors are running.
To achieve that we need to change the switchdev configuration flow.
Three first patches are only cosmetic (renaming, removing not used code).
Next few ones are preparation for new flow. The most important one
is "add VF representor one by one". It fully implements new flow.
New type of port representor (for subfunction) will be introduced in
follow up patchset.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: reserve number of CP queues
ice: adjust switchdev rebuild path
ice: add VF representors one by one
ice: realloc VSI stats arrays
ice: set Tx topology every time new repr is added
ice: allow changing SWITCHDEV_CTRL VSI queues
ice: return pointer to representor
ice: make representor code generic
ice: remove VF pointer reference in eswitch code
ice: track port representors in xarray
ice: use repr instead of vf->repr
ice: track q_id in representor
ice: remove unused control VSI parameter
ice: remove redundant max_vsi_num variable
ice: rename switchdev to eswitch
====================
Link: https://lore.kernel.org/r/20231114181449.1290117-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
igc: Add support for physical + free-running timers
Vinicius Costa Gomes says:
The objective is to allow having functionality that depends on the
physical timer (taprio and ETF offloads, for example) and vclocks
operating together.
The "big" missing piece is the implementation of the .getcyclesx64()
function in igc, as i225/i226 have multiple timers, we use one of
those timers (timer 1) as a free-running (non adjustable) timer.
The complication is that only implementing .getcyclesx64() and nothing
else will break synchronization when using vclocks, as reading the clock
will retrieve the free-running value but timnestamps will come from the
adjustable timer. The solution is to modify "in one go" the timestamping
code to be able to retrieve the timestamp from the correct timer (if a
socket is "phc_bound" to a vclock the timestamp will come from the
free-running timer).
I was debating whether or not to do the adjustments for the internal latencies
for the free-running timestamps, decided to do the adjustments so the path
delay when using vclocks is similar to the one when using the physical clock.
One future improvement is to implement the .getcrosscycles() function.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Add support for PTP .getcyclesx64()
igc: Simplify setting flags in the TX data descriptor
====================
Link: https://lore.kernel.org/r/20231114183640.1303163-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pedro Tammela says:
====================
net/sched: cls_u32: use proper refcounts
In u32 we are open coding refcounts of hashtables with integers which is
far from ideal. Update those with proper refcount and add a couple of
tests to tdc that exercise the refcounts explicitly.
====================
Link: https://lore.kernel.org/r/20231114141856.974326-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests to specifically check for the refcount interactions of
hashtables created by u32. These tables should not be deleted when
referenced and the flush order should respect a tree like composition.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231114141856.974326-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Proper refcounts will always warn splat when something goes wrong,
be it underflow, saturation or object resurrection. As these are always
a source of bugs, use it in cls_u32 as a safeguard to prevent/catch issues.
Another benefit is that the refcount API self documents the code, making
clear when transitions to dead are expected.
For such an update we had to make minor adaptations on u32 to fit the refcount
API. First we set explicitly to '1' when objects are created, then the
objects are alive until a 1 -> 0 happens, which is then released appropriately.
The above made clear some redundant operations in the u32 code
around the root_ht handling that were removed. The root_ht is created
with a refcnt set to 1. Then when it's associated with tcf_proto it increments the refcnt to 2.
Throughout the entire code the root_ht is an exceptional case and can never be referenced,
therefore the refcnt never incremented/decremented.
Its lifetime is always bound to tcf_proto, meaning if you delete tcf_proto
the root_ht is deleted as well. The code made up for the fact that root_ht refcnt is 2 and did
a double decrement to free it, which is not a fit for the refcount API.
Even though refcount_t is implemented using atomics, we should observe
a negligible control plane impact.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20231114141856.974326-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert following commits:
commit acec05fb78 ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06d ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00c ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c753 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d48 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab1228 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d0 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0 ("netlink: specs: Introduce time stamping set command")
They need more time for reviews.
Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
7 small fixes, 6 in drivers and one in sd. The sd fix is so large
because it changes a struct pointer to a struct but otherwise is
fairly simple.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZVkRkiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWnKAP9Tp3yI
OEX/k3QdMmY91kBSWR3fZ0WEBXkTGVhlQb96WwD9Gj5ea29GYHw3dFyUSvarj8B0
x+OwcZKStktz1Ua2aDU=
=E/Sg
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven small fixes, six in drivers and one in sd.
The sd fix is so large because it changes a struct pointer to a struct
but otherwise is fairly simple"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
scsi: sd: Fix sshdr use in sd_suspend_common()
scsi: scsi_debug: Delete some bogus error checking
scsi: scsi_debug: Fix some bugs in sdebug_error_write()
scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
scsi: qla2xxx: Fix system crash due to bad pointer access
- Fix power soft-off on qemu
- Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
writeable stacks
- Use strscpy instead of strlcpy in show_cpuinfo()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZVkHjgAKCRD3ErUQojoP
X196AP9I9w/4Go3HfvFNgEGUpVSbQq8679um13mlMdlFC6z3NAD+J32vmvU1keL1
0f4C7IltOr2ntU4QIXJUCLAPWO7NWgQ=
=r7N6
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"On parisc we still sometimes need writeable stacks, e.g. if programs
aren't compiled with gcc-14. To avoid issues with the upcoming
systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now
(for parisc only).
The other two patches are minor: a bugfix for the soft power-off on
qemu with 64-bit kernel and prefer strscpy() over strlcpy():
- Fix power soft-off on qemu
- Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
writeable stacks
- Use strscpy instead of strlcpy in show_cpuinfo()"
* tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
prctl: Disable prctl(PR_SET_MDWE) on parisc
parisc/power: Fix power soft-off when running on qemu
parisc: Replace strlcpy() with strscpy()
nfsd_client_rmdir() open-codes a subset of simple_recursive_removal().
Conversion to calling simple_recursive_removal() allows to clean things
up quite a bit.
While we are at it, nfsdfs_create_files() doesn't need to mess with "pick
the reference to struct nfsdfs_client from the already created parent" -
the caller already knows it (that's where the parent got it from,
after all), so we might as well just pass it as an explicit argument.
So __get_nfsdfs_client() is only needed in get_nfsdfs_client() and
can be folded in there.
Incidentally, the locking in get_nfsdfs_client() is too heavy - we don't
need ->i_rwsem for that, ->i_lock serves just fine.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The current emac setting is not suitable for Orange Pi Zero 3,
move it back to Orange Pi Zero 2 DT. Also update phy mode and
delay values for emac on Orange Pi Zero 3.
With these changes, Ethernet now looks stable.
Fixes: 322bf10320 ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Variable tmp_parent is being ininitialized with a value that is never
read, the initialization is redundant and can be removed. Move the
initialization and move the variable to the inner loop scope.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231023133502.666559-1-colin.i.king@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Mirsad proposed a patch to reduce the number of spinlock lock/unlock
operations and the function code size. This can be further improved
because the function sets a consecutive register block.
Suggested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Orange Pi Zero 2W is a board based on the Allwinner H618 SoC.
It uses the RaspberryPi Zero form factor, with an optional expansion
board, connected via an FPC connector, to provide more connectors.
The base board features:
- Allwinner H618 SoC (quad Cortex-A53 cores, with 1MB L2 cache)
- 1, 2 or 4GB of LPDDR4 DRAM
- SD card socket
- two USB-C sockets, one UFP, one DFP
- HDMI connector
- (yet unsupported) WiFi module
- 16 MiB SPI flash
- power supply via the UFP USB-C port
The FPC connector provides access to two more USB host ports, Fast
Ethernet, some GPIOs, Audio Line out and the IR receiver pin.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20231020145706.705420-3-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Orange Pi Zero 2W is a small board with an Allwinner H618 SoC.
Add the compatible string to the binding documents.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231020145706.705420-2-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
there's a strange comment in front of d_lookup() declaration:
/* appendix may either be NULL or be used for transname suffixes */
Looks like nobody had been curious enough to track its history;
it predates git, it predates bitkeeper and if you look through
the pre-BK trees, you finally arrive at this in 2.1.44-for-davem:
/* appendix may either be NULL or be used for transname suffixes */
-extern struct dentry * d_lookup(struct inode * dir, struct qstr * name,
- struct qstr * appendix);
+extern struct dentry * d_lookup(struct dentry * dir, struct qstr * name);
In other words, it refers to the third argument d_lookup() used to have
back then. It had been introduced in 2.1.43-pre, on June 12 1997,
along with d_lookup(), only to be removed by July 4 1997, presumably
when the Cthulhu-awful thing it used to be used for (look for
CONFIG_TRANS_NAMES in 2.1.43-pre, and keep a heavy-duty barfbag
ready) had been, er, noticed and recognized for what it had been.
Despite the appendectomy, the comment remained. Some things really
need to be put out of their misery...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
d_instantiate_unique() had been gone for 7 years; __d_lookup...()
and shrink_dcache_for_umount() are fs/internal.h fodder.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For bits 20..22 (inode type cached in ->d_flags) turn the definitions into
expressions like (5 << 20); everything else turns into straight use of
BIT()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This is beyond ridiculous. There is a reason why that thing is
cacheline-aligned...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit f9c34674bc ("vfs: factor out helpers d_instantiate_anon() and
d_alloc_anon()") was introduced so overlayfs could initialize a non-dir
disconnected overlay dentry before overlay inode is attached to it.
Since commit ("0af950f57f ovl: move ovl_entry into ovl_inode"), all
ovl_obtain_alias() can do is set DCACHE_OP_*REVALIDATE flags in ->d_flags
and OVL_E_UPPER_ALIAS flag in ->d_fsdata.
The DCACHE_OP_*REVALIDATE flags and OVL_E_UPPER_ALIAS flag are irrelevant
for a disconnected non-dir dentry, so it is better to use d_obtain_alias()
instead of open coding it.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andrii Nakryiko says:
====================
BPF verifier log improvements
This patch set moves a big chunk of verifier log related code from gigantic
verifier.c file into more focused kernel/bpf/log.c. This is not essential to
the rest of functionality in this patch set, so I can undo it, but it felt
like it's good to start chipping away from 20K+ verifier.c whenever we can.
The main purpose of the patch set, though, is in improving verifier log
further.
Patches #3-#4 start printing out register state even if that register is
spilled into stack slot. Previously we'd get only spilled register type, but
no additional information, like SCALAR_VALUE's ranges. Super limiting during
debugging. For cases of register spills smaller than 8 bytes, we also print
out STACK_MISC/STACK_ZERO/STACK_INVALID markers. This, among other things,
will make it easier to write tests for these mixed spill/misc cases.
Patch #5 prints map name for PTR_TO_MAP_VALUE/PTR_TO_MAP_KEY/CONST_PTR_TO_MAP
registers. In big production BPF programs, it's important to map assembly to
actual map, and it's often non-trivial. Having map name helps.
Patch #6 just removes visual noise in form of ubiquitous imm=0 and off=0. They
are default values, omit them.
Patch #7 is probably the most controversial, but it reworks how verifier log
prints numbers. For small valued integers we use decimals, but for large ones
we switch to hexadecimal. From personal experience this is a much more useful
convention. We can tune what consitutes "small value", for now it's 16-bit
range.
Patch #8 prints frame number for PTR_TO_CTX registers, if that frame is
different from the "current" one. This removes ambiguity and confusion,
especially in complicated cases with multiple subprogs passing around
pointers.
v2->v3:
- adjust reg_bounds tester to parse hex form of reg state as well;
- print reg->range as unsigned (Alexei);
v1->v2:
- use verbose_snum() for range and offset in register state (Eduard);
- fixed typos and added acks from Eduard and Stanislav.
====================
Link: https://lore.kernel.org/r/20231118034623.3320920-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's possible to pass a pointer to parent's stack to child subprogs. In
such case verifier state output is ambiguous not showing whether
register container a pointer to "current" stack, belonging to current
subprog (frame), or it's actually a pointer to one of parent frames.
So emit this information if frame number differs between the state which
register is part of. E.g., if current state is in frame 2 and it has
a register pointing to stack in grand parent state (frame #0), we'll see
something like 'R1=fp[0]-16', while "local stack pointer" will be just
'R2=fp-16'.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of always printing numbers as either decimals (and in some
cases, like for "imm=%llx", in hexadecimals), decide the form based on
actual values. For numbers in a reasonably small range (currently,
[0, U16_MAX] for unsigned values, and [S16_MIN, S16_MAX] for signed ones),
emit them as decimals. In all other cases, even for signed values,
emit them in hexadecimals.
For large values hex form is often times way more useful: it's easier to
see an exact difference between 0xffffffff80000000 and 0xffffffff7fffffff,
than between 18446744071562067966 and 18446744071562067967, as one
particular example.
Small values representing small pointer offsets or application
constants, on the other hand, are way more useful to be represented in
decimal notation.
Adjust reg_bounds register state parsing logic to take into account this
change.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify BPF verifier log further by omitting default (and frequently
irrelevant) off=0 and imm=0 parts for non-SCALAR_VALUE registers. As can
be seen from fixed tests, this is often a visual noise for PTR_TO_CTX
register and even for PTR_TO_PACKET registers.
Omitting default values follows the rest of register state logic: we
omit default values to keep verifier log succinct and to highlight
interesting state that deviates from default one. E.g., we do the same
for var_off, when it's unknown, which gives no additional information.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In complicated real-world applications, whenever debugging some
verification error through verifier log, it often would be very useful
to see map name for PTR_TO_MAP_VALUE register. Usually this needs to be
inferred from key/value sizes and maybe trying to guess C code location,
but it's not always clear.
Given verifier has the name, and it's never too long, let's just emit it
for ptr_to_map_key, ptr_to_map_value, and const_ptr_to_map registers. We
reshuffle the order a bit, so that map name, key size, and value size
appear before offset and immediate values, which seems like a more
logical order.
Current output:
R1_w=map_ptr(map=array_map,ks=4,vs=8,off=0,imm=0)
But we'll get rid of useless off=0 and imm=0 parts in the next patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print the same register state representation when printing stack state,
as we do for normal registers. Note that if stack slot contains
subregister spill (1, 2, or 4 byte long), we'll still emit "m0?" mask
for those bytes that are not part of spilled register.
While means we can get something like fp-8=0000scalar() for a 4-byte
spill with other 4 bytes still being STACK_ZERO.
Some example before and after, taken from the log of
pyperf_subprogs.bpf.o:
49: (7b) *(u64 *)(r10 -256) = r1 ; frame1: R1_w=ctx(off=0,imm=0) R10=fp0 fp-256_w=ctx
49: (7b) *(u64 *)(r10 -256) = r1 ; frame1: R1_w=ctx(off=0,imm=0) R10=fp0 fp-256_w=ctx(off=0,imm=0)
150: (7b) *(u64 *)(r10 -264) = r0 ; frame1: R0_w=map_value_or_null(id=6,off=0,ks=192,vs=4,imm=0) R10=fp0 fp-264_w=map_value_or_null
150: (7b) *(u64 *)(r10 -264) = r0 ; frame1: R0_w=map_value_or_null(id=6,off=0,ks=192,vs=4,imm=0) R10=fp0 fp-264_w=map_value_or_null(id=6,off=0,ks=192,vs=4,imm=0)
5192: (61) r1 = *(u32 *)(r10 -272) ; frame1: R1_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=15,var_off=(0x0; 0xf)) R10=fp0 fp-272=
5192: (61) r1 = *(u32 *)(r10 -272) ; frame1: R1_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=15,var_off=(0x0; 0xf)) R10=fp0 fp-272=????scalar(smin=smin32=0,smax=umax=smax32=umax32=15,var_off=(0x0; 0xf))
While at it, do a few other simple clean ups:
- skip slot if it's not scratched before detecting whether it's valid;
- move taking spilled_reg pointer outside of switch (only DYNPTR has
to adjust that to get to the "main" slot);
- don't recalculate types_buf second time for MISC/ZERO/default case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract printing register state representation logic into a separate
helper, as we are going to reuse it for spilled register state printing
in the next patch. This also nicely reduces code nestedness.
No functional changes.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move a good chunk of code from verifier.c to log.c: verifier state
verbose printing logic. This is an important and very much
logging/debugging oriented code. It fits the overlall log.c's focus on
verifier logging, and moving it allows to keep growing it without
unnecessarily adding to verifier.c code that otherwise contains a core
verification logic.
There are not many shared dependencies between this code and the rest of
verifier.c code, except a few single-line helpers for various register
type checks and a bit of state "scratching" helpers. We move all such
trivial helpers into include/bpf/bpf_verifier.h as static inlines.
No functional changes in this patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
verifier.c is huge. Let's try to move out parts that are logging-related
into log.c, as we previously did with bpf_log() and other related stuff.
This patch moves line info verbose output routines: it's pretty
self-contained and isolated code, so there is no problem with this.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* Fix deadlock arising due to intent items in AIL not being cleared when log
recovery fails.
* Fix stale data exposure bug when remapping COW fork extents to data fork.
* Fix deadlock when data device flush fails.
* Fix AGFL minimum size calculation.
* Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
selected.
* Fix corruption of log inode's extent count field when NREXT64 feature is
enabled.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZVNouAAKCRAH7y4RirJu
9O0mAQDePPSRT8ZrR63dxFZ1AW55q4y9iqgBxWcnKEelmVULPwD/byzoAJ46jvcL
qpBHUJ1rUIcd/fGqAEkwfG6hKzD99w8=
=G+60
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Fix deadlock arising due to intent items in AIL not being cleared
when log recovery fails
- Fix stale data exposure bug when remapping COW fork extents to data
fork
- Fix deadlock when data device flush fails
- Fix AGFL minimum size calculation
- Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
selected
- Fix corruption of log inode's extent count field when NREXT64 feature
is enabled
* tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: recovery should not clear di_flushiter unconditionally
xfs: inode recovery does not validate the recovered inode
xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
xfs: fix internal error from AGFL exhaustion
xfs: up(ic_sema) if flushing data device fails
xfs: only remap the written blocks in xfs_reflink_end_cow_extent
XFS: Update MAINTAINERS to catch all XFS documentation
xfs: abort intent items when recovery intents fail
xfs: factor out xfs_defer_pending_abort
- Fix several long-standing bugs in the duplicate reply cache
- Fix a memory leak
-----BEGIN PGP SIGNATURE-----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=GOU4
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix several long-standing bugs in the duplicate reply cache
- Fix a memory leak
* tag 'nfsd-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix checksum mismatches in the duplicate reply cache
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
NFSD: Update nfsd_cache_append() to use xdr_stream
nfsd: fix file memleak on client_opens_release
-----BEGIN PGP SIGNATURE-----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=idlR
-----END PGP SIGNATURE-----
Merge tag '6.7-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- multichannel fixes (including a lock ordering fix and an important
refcounting fix)
- spnego fix
* tag '6.7-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix lock ordering while disabling multichannel
cifs: fix leak of iface for primary channel
cifs: fix check of rc in function generate_smb3signingkey
cifs: spnego: add ';' in HOST_KEY_LEN
systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.
Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775
Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+
introduced during the 6.7 merge.
- Fixes to both DM bufio and the verity target for no-sleep mode, to
address sleeping while atomic issues.
- Update DM crypt target in response to the treewide change that made
MAX_ORDER inclusive.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmVY35gACgkQxSPxCi2d
A1pt/gf+NVN/3N0BMYlc/L129+QCIreDH/PuhoxVxMLrhZ8oERw7XkgGIu5JoR1C
Sec5OWJWV0+AZ3kSeW8WBoFFGDdfTYQTId2R3mF3a+34mpAvjTMqnvGkA1GrixCt
xvj2cQjQkBWwwbikAkHZOUoK3UEPFurk/a7oXTAl43kZaV6gWHEAY/bxet9Wuc7+
NWN6xEg7sHhdVgJYltGkOl8Pf9y3zPDUT8SqFT0J7dPEGytNHscozDdRJiLmvoS6
g4WkMkrg87Ude7g0/l7hCM9b3ElamtMsZtyy43cvaKp3UrwFiAzFMCprEl4TS5Br
LNhuwegIBWMVCklRiTDG+uHnbMxKZg==
=9Lfg
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Various fixes for the DM delay target to address regressions
introduced during the 6.7 merge window
- Fixes to both DM bufio and the verity target for no-sleep mode,
to address sleeping while atomic issues
- Update DM crypt target in response to the treewide change that
made MAX_ORDER inclusive
* tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt: start allocating with MAX_ORDER
dm-verity: don't use blocking calls from tasklets
dm-bufio: fix no-sleep mode
dm-delay: avoid duplicate logic
dm-delay: fix bugs introduced by kthread mode
dm-delay: fix a race between delay_presuspend and delay_bio
Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.
Fixes: d0c2194729 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
IO accessors for designware, and use proper PM level for ocores to allow
accessing interrupt providers late.
-----BEGIN PGP SIGNATURE-----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=ztqw
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Revert a not-working conversion to generic recovery for PXA,
use proper IO accessors for designware, and use proper PM level
for ocores to allow accessing interrupt providers late"
* tag 'i2c-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ocores: Move system PM hooks to the NOIRQ phase
i2c: designware: Fix corrupted memory seen in the ISR
Revert "i2c: pxa: move to generic GPIO recovery"