This terminal 1-length variable array can be directly converted into a C99
flexible array member.
As all users of MPI2_CONFIG_PAGE_IO_UNIT_8 (Mpi2IOUnitPage8_t) do not use
Sensor[], no further source changes are required to accommodate its reduced
sizeof():
- mpt3sas_config.c:mpt3sas_config_get_iounit_pg8() fetches a
Mpi2IOUnitPage8_t into a caller-provided buffer, assuming
sizeof(Mpi2IOUnitPage8_t) as the buffer size. It has one caller:
- mpt3sas_base.c:_base_static_config_pages() passes the address of the
Mpi2IOUnitPage8_t iounit_pg8 member of the per-adapter struct (struct
MPT3SAS_ADAPTER *ioc) as the buffer. The assumed buffer size is
therefore correct.
However, the only subsequent use in mpt3sas of the thus populated
ioc->iounit_pg8 is a little further on in the same function, and this
use does not involve ioc->iounit_pg8.Sensor[].
Note that iounit_pg8 occurs in the middle of the per-adapter struct,
not at the end. The per-adapter struct is extensively used throughout
mpt3sas even if its iounit_pg8 member isn't, resulting in an
especially large amount of noise when comparing binary changes
attributable to this commit.
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-3-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These terminal 1-length variable arrays can be directly converted into C99
flexible array members without any binary changes.
In most cases, they belong to unused structs, or to structs used only by
unused code. The remaining few coincidentally have their sizes calculated
in roundabout ways that do not depend on the sizeof() their structs.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Seo <james@equiv.tech>
Link: https://lore.kernel.org/r/20230806170604.16143-2-james@equiv.tech
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A previous commit added a trylock for getting the SQPOLL thread info via
fdinfo, but this introduced a regression where we often fail to get it if
the thread is busy. For that case, we end up not printing the current CPU
and PID info.
Rather than rely on this lock, just print the pid we already stored in
the io_sq_data struct, and ensure we update the current CPU every time
we've slept or potentially rescheduled. The latter won't potentially be
100% accurate, but that wasn't the case before either as the task can
get migrated at any time unless it has been pinned at creation time.
We retain keeping the io_sq_data dereference inside the ctx->uring_lock,
as it has always been, as destruction of the thread and data happen below
that. We could make this RCU safe, but there's little point in doing that.
With this, we always print the last valid information we had, rather than
have spurious outputs with missing information.
Fixes: 7644b1a1c9 ("io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add debugfs support which will print source and sink status
per connector basis. Existing i915_psr_status and
i915_psr_sink_status will be used to get the source and
sink status of panel replay.
v1: Initial version. [rb-ed by Arun]
v2: Added check for DP 2.0 and connector type in connector_debugfs_add().
v3: Optimization and cosmetic changes. [Jouni]
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-7-animesh.manna@intel.com
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230925095532.1984344-41-u.kleine-koenig@pengutronix.de
Signed-off-by: Michal Simek <michal.simek@amd.com>
Do not acquire a reference on the module that provides a client's
callback functions in drm_client_init(). The additional reference
prevents the user from unloading the callback functions' module and
thus creating dangling pointers.
This is only necessary if there is no direct dependency between the
caller of drm_client_init() and the provider of the callbacks in
struct drm_client_funcs. If this case ever existed, it has been
removed from the DRM code. Callers of drm_client_init() also provide
the callback implementation. The lifetime of the clients is tied to
the dependency chain's outer-most module, which is the hardware's
DRM driver. Before client helpers could be unloaded, the driver module
would have to be unloaded, which also unregisters all clients.
Driver modules that set up DRM clients can now be unloaded.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102131056.7256-2-tzimmermann@suse.de
Enable the options to mount a rootfs over NFS for microblaze
platforms and also support for automatic configuration of IP addresses
during boot as needed by NFS.
Signed-off-by: Raju Kumar Pothuraju <rajukumar.pothuraju@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d7bc1c93e485e0a6ab2c234a144402b7bd5f77bb.1698155190.git.michal.simek@amd.com
Add samsung,exynosautov9-uart dedicated compatible for representing
uart of ExynosAutov920 SoC.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231115095609.39883-5-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add samsung,exynosautov920-usi dedicated compatible for representing USI
of ExynosAutoV920 SoC.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231115095609.39883-4-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
acpi_object *obj is unused in this function, so delete it, also
delete a unnecessary kfree(obj);
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-4-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
'attr_name_kobj' is allocated using kzalloc, but on all the error paths
it is not freed, hence we have a memory leak.
Fix the error path before kobject_init_and_add() by adding kfree().
kobject_put() must be always called after passing the object to
kobject_init_and_add(). Only the error path which is immediately next
to kobject_init_and_add() calls kobject_put() and not any other error
path after it.
Fix the error handling after kobject_init_and_add() by moving the
kobject_put() into the goto label err_other_attr_init that is already
used by all the error paths after kobject_init_and_add().
Fixes: a34fc329b1 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org # 6.6.x: c5dbf04160: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
Cc: stable@vger.kernel.org # 6.6.x: 5736aa9537: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ij: Added the stable dep tags]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-3-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
attr_name_kobj's memory allocation is done with mutex_lock() held, this
is not needed.
Move allocation outside of mutex_lock() so unlock is not needed when
allocation fails.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
All cases in switch-case have a same goto on error, move the return
check out of the switch. This is a cleanup.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set,
causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes.
Fixes: ecaa1867b5 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol")
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Maurice is no longer with Intel and his e-mail address is no longer
active. Remove the stale entry from Slim boot loader section.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20231102195218.143440-1-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ExynosAutov9 SADK board has 3 keys to test external GPIO interrupt.
To support this, add 3 gpio-key(Wakeup, Volume Down, Volume Up) node.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Link: https://lore.kernel.org/r/20231027040338.63088-1-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
ExynosAutov9 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to ExynosAutov9 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-18-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos850 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos850 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-17-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos7885 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos7885 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-16-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos7 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos7 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-15-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Exynos5433 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos5433 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20231108104343.24192-14-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231108104343.24192-13-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231108104343.24192-12-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231108104343.24192-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231108104343.24192-10-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231108104343.24192-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Re-shuffle also the entries in compatibles, so the one-compatible-enum
is the first.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231108104343.24192-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20231108104343.24192-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Samsung Exynos SoC reuses several devices from older designs, thus
historically we kept the old (block's) compatible only. This works fine
and there is no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to each SoC in front of all old-SoC-like
compatibles.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231108104343.24192-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cited commit removed the strscpy() call and kept the snprintf() only.
It is common to use 'dev->name' as the format string before a netdev is
registered, this results in 'res' and 'name' pointers being equal.
According to POSIX, if copying takes place between objects that overlap
as a result of a call to sprintf() or snprintf(), the results are
undefined.
Add back the strscpy() and use 'buf' as an intermediate buffer.
Fixes: 7ad17b04dc ("net: trust the bitmap in __dev_alloc_name()")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When in the list_for_each_entry iteration, reload of p->state->settings
with a local setting from old_state will turn the list iteration into an
infinite loop.
The typical symptom when the issue happens, will be a printk message like:
"not freeing pin xx (xxx) as part of deactivating group xxx - it is
already used for some other setting".
This is a compiler-dependent problem, one instance occurred using Clang
version 10.0 on the arm64 architecture with linux version 4.19.
Fixes: 6e5e959dde ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115102824.23727-1-quic_aiquny@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The top syzbot report for networking (#14 for the entire kernel)
is the queue timeout splat. We kept it around for a long time,
because in real life it provides pretty strong signal that
something is wrong with the driver or the device.
Removing it is also likely to break monitoring for those who
track it as a kernel warning.
Nevertheless, WARN()ings are best suited for catching kernel
programming bugs. If a Tx queue gets starved due to a pause
storm, priority configuration, or other weirdness - that's
obviously a problem, but not a problem we can fix at
the kernel level.
Bite the bullet and convert the WARN() to a print.
Before:
NETDEV WATCHDOG: eni1np1 (netdevsim): transmit queue 0 timed out 1975 ms
WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:525 dev_watchdog+0x39e/0x3b0
[... completely pointless stack trace of a timer follows ...]
Now:
netdevsim netdevsim1 eni1np1: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 1769 ms
Alternatively we could mark the drivers which syzbot has
learned to abuse as "print-instead-of-WARN" selectively.
Reported-by: syzbot+d55372214aff0faa1f1f@syzkaller.appspotmail.com
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: TX path improvements
All patches in this patchset are related to improving the TX path.
There are 2 areas of improvements:
1. The TX interrupt logic currently counts the number of TX completions
to determine the number of TX SKBs to free. We now change it so that
the TX completion will now contain the hardware consumer index
information. The driver will keep track of the latest hardware
consumer index from the last TX completion and clean up all TX SKBs
up to that index. This scheme aligns better with future chips and
allows xmit_more code path to be more optimized.
2. The current driver logic requires an additional MSIX for each
additional MQPRIO TX ring. This scheme uses too many MSIX vectors if
the user enables a large number of MQPRIO TCs. We now use a new scheme
that will use the same MSIX for all the MQPRIO TX rings for each
ethtool channel. Each ethtool TX channel can have up to 8 MQPRIO
TX rings and now they all will share the same MSIX.
v2: Rebased
v1 posted on Oct 27 2023 right before the close of net-next:
https://lore.kernel.org/netdev/20231027232252.36111-1-michael.chan@broadcom.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we use the cumulative consumer index scheme for TX completion,
we don't need to have one TX completion per TX packet in the xmit_more
code path. Set the TX_BD_FLAGS_NO_CMPL flag if xmit_more is true.
Fallback to one interrupt per packet if the ring is filled beyond
bp->tx_wake_thresh.
Also, move the wmb() to bnxt_txr_db_kick(). When xmit_more is true,
we'll skip the bnxt_txr_db_kick() call and there is no need to call
wmb() to sync. the TX BD data.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can now fully support sharing the same MSIX for all mqprio TX rings
belonging to the same ethtool channel with the new infrastructure:
1. Allocate the proper entries for cp_ring_arr in struct bnxt_cp_ring_info
to support the additional TX rings.
2. Populate the tx_ring array in struct bnxt_napi for all TX rings
sharing the same NAPI.
3. bnxt_num_tx_to_cp() returns the proper NQ/completion rings to support
the TX rings in the input.
4. Adjust bnxt_get_num_ring_stats() for the reduced number of ring
counters with the new scheme.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 3 macros that handle to conversions between TC numbers and TX
ring numbers. These will help to clarify the existing logic and the
new logic in the next patch.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up until now, each TX ring always requires a completion ring/NQ/MSIX.
bnxt_trim_rings() and the assignment of bp->cp_nr_rings always make
this assumption. This will no longer be true in the next patches, so
we refactor and add helper functions to determine the proper relationship
between TX rings and the required completion ring/NQ/MSIX. This patch
does not change the 1:1 relationship yet.
Note that on P5 chips, each RX and TX ring still requires a completion
ring. Only the number of NQs has been reduced. We should no longer call
bnxt_trim_rings() to adjust the RX and TX rings on P5 chips. Replace with
simple logic to check that RX + TX < CP and adjust accordingly.
bnxt_check_rings() should call _bnxt_get_max_rings() to get the raw
number of rings instead of bnxt_get_max_rings(). If we are about to
create TCs, bnxt_get_max_rings() would not be able to calculate the max
rings correctly.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For each mqprio TC, we allocate a set of TX rings to map to the new
hardware CoS queue. Expand the tx_ring pointer in struct bnxt_napi
to an array of 8 to support up to 8 TX rings, one for each TC.
Only array entry 0 is used at this time. The rest of the array
entries will be used in later patches.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>