[ Upstream commit 8ac412a336 ]
MEM_WRITE attribute is defined as: "Non-presence of MEM_WRITE means that
MEM is only being read". bpf_load_hdr_opt() both reads and writes from
its arg2 - void *search_res.
This matters a lot for the next commit where we more precisely track
stack accesses. Without this annotation, the verifier will make false
assumptions about the contents of memory written to by helpers and
possibly prune valid branches.
Fixes: 6fad274f06 ("bpf: Add MEM_WRITE attribute")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/730e45f8c39be2a5f3d8c4406cceca9d574cbf14.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d640627663 ]
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250115164220.19954-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c1a9ca53 ]
I noticed that HyStart incorrectly marks the start of rounds,
leading to inaccurate measurements of ACK train lengths and
resetting the `ca->sample_cnt` variable. This inaccuracy can impact
HyStart's functionality in terminating exponential cwnd growth during
Slow-Start, potentially degrading TCP performance.
The issue arises because the changes introduced in commit 4e1fddc98d
("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
moved the caller of the `bictcp_hystart_reset` function inside the `hystart_update` function.
This modification added an additional condition for triggering the caller,
requiring that (tcp_snd_cwnd(tp) >= hystart_low_window) must also
be satisfied before invoking `bictcp_hystart_reset`.
This fix ensures that `bictcp_hystart_reset` is correctly called
at the start of a new round, regardless of the congestion window size.
This is achieved by moving the condition
(tcp_snd_cwnd(tp) >= hystart_low_window)
from before calling `bictcp_hystart_reset` to after it.
I tested with a client and a server connected through two Linux software routers.
In this setup, the minimum RTT was 150 ms, the bottleneck bandwidth was 50 Mbps,
and the bottleneck buffer size was 1 BDP, calculated as (50M / 1514 / 8) * 0.150 = 619 packets.
I conducted the test twice, transferring data from the server to the client for 1.5 seconds.
Before the patch was applied, HYSTART-DELAY stopped the exponential growth of cwnd when
cwnd = 516, and the bottleneck link was not yet saturated (516 < 619).
After the patch was applied, HYSTART-ACK-TRAIN stopped the exponential growth of cwnd when
cwnd = 632, and the bottleneck link was saturated (632 > 619).
In this test, applying the patch resulted in 300 KB more data delivered.
Fixes: 4e1fddc98d ("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
Signed-off-by: Mahdi Arghavani <ma.arghavani@yahoo.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haibo Zhang <haibo.zhang@otago.ac.nz>
Cc: David Eyers <david.eyers@otago.ac.nz>
Cc: Abbas Arghavani <abbas.arghavani@mdu.se>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a12c76a033 ]
This patch addresses issues with filter counting in block (tcf_block),
particularly for software bypass scenarios, by introducing a more
accurate mechanism using useswcnt.
Previously, filtercnt and skipswcnt were introduced by:
Commit 2081fd3445 ("net: sched: cls_api: add filter counter") and
Commit f631ef39d8 ("net: sched: cls_api: add skip_sw counter")
filtercnt tracked all tp (tcf_proto) objects added to a block, and
skipswcnt counted tp objects with the skipsw attribute set.
The problem is: a single tp can contain multiple filters, some with skipsw
and others without. The current implementation fails in the case:
When the first filter in a tp has skipsw, both skipswcnt and filtercnt
are incremented, then adding a second filter without skipsw to the same
tp does not modify these counters because tp->counted is already set.
This results in bypass software behavior based solely on skipswcnt
equaling filtercnt, even when the block includes filters without
skipsw. Consequently, filters without skipsw are inadvertently bypassed.
To address this, the patch introduces useswcnt in block to explicitly count
tp objects containing at least one filter without skipsw. Key changes
include:
Whenever a filter without skipsw is added, its tp is marked with usesw
and counted in useswcnt. tc_run() now uses useswcnt to determine software
bypass, eliminating reliance on filtercnt and skipswcnt.
This refined approach prevents software bypass for blocks containing
mixed filters, ensuring correct behavior in tc_run().
Additionally, as atomic operations on useswcnt ensure thread safety and
tp->lock guards access to tp->usesw and tp->counted, the broader lock
down_write(&block->cb_lock) is no longer required in tc_new_tfilter(),
and this resolves a performance regression caused by the filter counting
mechanism during parallel filter insertions.
The improvement can be demonstrated using the following script:
# cat insert_tc_rules.sh
tc qdisc add dev ens1f0np0 ingress
for i in $(seq 16); do
taskset -c $i tc -b rules_$i.txt &
done
wait
Each of rules_$i.txt files above includes 100000 tc filter rules to a
mlx5 driver NIC ens1f0np0.
Without this patch:
# time sh insert_tc_rules.sh
real 0m50.780s
user 0m23.556s
sys 4m13.032s
With this patch:
# time sh insert_tc_rules.sh
real 0m17.718s
user 0m7.807s
sys 3m45.050s
Fixes: 047f340b36 ("net: sched: make skip_sw actually skip software")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a4b614063 ]
The conntrack entry is already public, there is a small chance that another
CPU is handling a packet in reply direction and racing with the tcp state
update.
Move this under ct spinlock.
This is done once, when ct is about to be offloaded, so this should
not result in a noticeable performance hit.
Fixes: 8437a6209f ("netfilter: nft_flow_offload: set liberal tracking mode for tcp")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d738c1869 ]
The existing rbtree implementation uses singleton elements to represent
ranges, however, userspace provides a set size according to the number
of ranges in the set.
Adjust provided userspace set size to the number of singleton elements
in the kernel by multiplying the range by two.
Check if the no-match all-zero element is already in the set, in such
case release one slot in the set size.
Fixes: 0ed6389c48 ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc50835e83 ]
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12e070eb69 ]
The following trace can be seen if a device is being unregistered while
its number of channels are being modified.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120
CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771
RIP: 0010:__mutex_lock+0xc8a/0x1120
Call Trace:
<TASK>
ethtool_check_max_channel+0x1ea/0x880
ethnl_set_channels+0x3c3/0xb10
ethnl_default_set_doit+0x306/0x650
genl_family_rcv_msg_doit+0x1e3/0x2c0
genl_rcv_msg+0x432/0x6f0
netlink_rcv_skb+0x13d/0x3b0
genl_rcv+0x28/0x40
netlink_unicast+0x42e/0x720
netlink_sendmsg+0x765/0xc20
__sys_sendto+0x3ac/0x420
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is because unregister_netdevice_many_notify might run before the
rtnl lock section of ethnl operations, eg. set_channels in the above
example. In this example the rss lock would be destroyed by the device
unregistration path before being used again, but in general running
ethnl operations while dismantle has started is not a good idea.
Fix this by denying any operation on devices being unregistered. A check
was already there in ethnl_ops_begin, but not wide enough.
Note that the same issue cannot be seen on the ioctl version
(__dev_ethtool) because the device reference is retrieved from within
the rtnl lock section there. Once dismantle started, the net device is
unlisted and no reference will be found.
Fixes: dde91ccfa2 ("ethtool: do not perform operations on net devices being unregistered")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f9f79fa2 ]
The following problem was encountered during stability test:
(NULL net_device): NAPI poll function process_backlog+0x0/0x530 \
returned 1, exceeding its budget of 0.
------------[ cut here ]------------
list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \
next=ffff88905f746e40.
WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \
__list_add_valid_or_report+0xf3/0x130
CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+
RIP: 0010:__list_add_valid_or_report+0xf3/0x130
Call Trace:
? __warn+0xcd/0x250
? __list_add_valid_or_report+0xf3/0x130
enqueue_to_backlog+0x923/0x1070
netif_rx_internal+0x92/0x2b0
__netif_rx+0x15/0x170
loopback_xmit+0x2ef/0x450
dev_hard_start_xmit+0x103/0x490
__dev_queue_xmit+0xeac/0x1950
ip_finish_output2+0x6cc/0x1620
ip_output+0x161/0x270
ip_push_pending_frames+0x155/0x1a0
raw_sendmsg+0xe13/0x1550
__sys_sendto+0x3bf/0x4e0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reproduction command is as follows:
sysctl -w net.core.dev_weight=0
ping 127.0.0.1
This is because when the napi's weight is set to 0, process_backlog() may
return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this
napi to be re-polled in net_rx_action() until __do_softirq() times out.
Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can
be retriggered in enqueue_to_backlog(), causing this issue.
Making the napi's weight always non-zero solves this problem.
Triggering this issue requires system-wide admin (setting is
not namespaced).
Fixes: e387660545 ("[NET]: Fix sysctl net.core.dev_weight")
Fixes: 3d48b53fb2 ("net: dev_weight: TX/RX orthogonality")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e361560a79 ]
The cited commit forgot to add netdev_rename_lock in one of the
error paths in dev_change_name().
Let's hold netdev_rename_lock before restoring the old dev->name.
Fixes: 0840556e5a ("net: Protect dev->name by seqlock.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250115095545.52709-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3440fa34ad ]
Following fields of 'struct mr_mfc' can be updated
concurrently (no lock protection) from ip_mr_forward()
and ip6_mr_forward()
- bytes
- pkt
- wrong_if
- lastuse
They also can be read from other functions.
Convert bytes, pkt and wrong_if to atomic_long_t,
and use READ_ONCE()/WRITE_ONCE() for lastuse.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a0d24775c ]
In 'cfg80211_scan_6ghz()', an instances of 'struct cfg80211_colocated_ap'
are allocated as if they would have 'ssid' as trailing VLA member. Since
this is not so, extra IEEE80211_MAX_SSID_LEN bytes are not needed.
Briefly tested with KUnit.
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250113155417.552587-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4b6539038 ]
When recvmsg with MSG_PEEK flag, the data will be copied to
user's buffer without advancing consume cursor and without
reducing the length of rx available data. Once the expected
peek length is larger than the value of bytes_to_rcv, in the
loop of do while in smc_rx_recvmsg, the first loop will copy
bytes_to_rcv bytes of data from the position local_tx_ctrl.cons,
the second loop will copy the min(bytes_to_rcv, read_remaining)
bytes from the position local_tx_ctrl.cons again because of the
lacking of process with advancing consume cursor and reducing
the length of available data. So do the subsequent loops. The
data copied in the second loop and the subsequent loops will
result in data error, as it should not be copied if no more data
arrives and it should be copied from the position advancing
bytes_to_rcv bytes from the local_tx_ctrl.cons if more data arrives.
This issue can be reproduce by the following python script:
server.py:
import socket
import time
server_ip = '0.0.0.0'
server_port = 12346
server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server_socket.bind((server_ip, server_port))
server_socket.listen(1)
print('Server is running and listening for connections...')
conn, addr = server_socket.accept()
print('Connected by', addr)
while True:
data = conn.recv(1024)
if not data:
break
print('Received request:', data.decode())
conn.sendall(b'Hello, client!\n')
time.sleep(5)
conn.sendall(b'Hello, again!\n')
conn.close()
client.py:
import socket
server_ip = '<server ip>'
server_port = 12346
resp=b'Hello, client!\nHello, again!\n'
client_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
client_socket.connect((server_ip, server_port))
request = 'Hello, server!'
client_socket.sendall(request.encode())
peek_data = client_socket.recv(len(resp),
socket.MSG_PEEK | socket.MSG_WAITALL)
print('Peeked data:', peek_data.decode())
client_socket.close()
Fixes: 952310ccf2 ("smc: receive data from RMBE")
Reported-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20250104143201.35529-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa3ce3f8fa ]
If STA state is pre-moved to AUTHORIZED (such as in IBSS
scenarios) and insertion fails, the station is freed.
In this case, the driver never knew about the station,
so trying to flush it is unexpected and may crash.
Check if the sta was uploaded to the driver before and
fix this.
Fixes: d00800a289 ("wifi: mac80211: add flush_sta method")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.e3d10970a7c7.I491bbcccc46f835ade07df0640a75f6ed92f20a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3aaa1a5a9a ]
With change (wifi: mac80211: fix receiving A-MSDU
frames on mesh interfaces), a non-zero TID assignment
is lost during slow path mesh forwarding.
Prior to this change, ieee80211_rx_h_mesh_fwding()
left the TID intact in the header.
As a result of this header corruption, packets belonging
to non-zero TIDs will get treating as belonging
TID 0 by functions such as ieee80211_get_tid().
While this miscategorization by itself is an
issue, there are additional ramifications
due to the fact that skb->priority still reflects
the mesh forwarded packet's ingress (correct) TID.
The mt7915 driver inspects the TID recorded within
skb->priority and relays this to the
hardware/radio during TX. The radio firmware appears to
react to this by changing the sequence control
header, but it does not also ensure/correct the TID in
the QoS control header. As a result, the receiver
will see packets with sequence numbers corresponding
to the wrong TID. The receiver of the forwarded
packet will see TID 0 in QoS control but a sequence number
corresponding to the correct (different) TID in sequence
control. This causes data stalls for TID 0 until
the TID 0 sequence number advances past what the receiver
believes it should be due to this bug.
Mesh routing mpath changes cause a brief transition
from fast path forwarding to slow path forwarding.
Since this bug only affects the slow path forwarding,
mpath changes bring opportunity for the bug to be triggered.
In the author's case, he was experiencing TID 0 data stalls
after mpath changes on an intermediate mesh node.
These observed stalls may be specific
to mediatek radios. But the inconsistency between
the packet header and skb->priority may cause problems
for other drivers as well. Regardless if this causes
connectivity issues on other radios, this change is
necessary in order transmit (forward) the packet on the
correct TID and to have a consistent view a packet's TID
within mac80211.
Fixes: 986e43b19a ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Signed-off-by: Andy Strohman <andrew@andrewstrohman.com>
Link: https://patch.msgid.link/20250107104431.446775-1-andrew@andrewstrohman.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a502ea6fa9 ]
If a UDP socket changes its local address while it's receiving
datagrams, as a result of connect(), there is a period during which
a lookup operation might fail to find it, after the address is changed
but before the secondary hash (port and address) and the four-tuple
hash (local and remote ports and addresses) are updated.
Secondary hash chains were introduced by commit 30fff9231f ("udp:
bind() optimisation") and, as a result, a rehash operation became
needed to make a bound socket reachable again after a connect().
This operation was introduced by commit 719f835853 ("udp: add
rehash on connect()") which isn't however a complete fix: the
socket will be found once the rehashing completes, but not while
it's pending.
This is noticeable with a socat(1) server in UDP4-LISTEN mode, and a
client sending datagrams to it. After the server receives the first
datagram (cf. _xioopen_ipdgram_listen()), it issues a connect() to
the address of the sender, in order to set up a directed flow.
Now, if the client, running on a different CPU thread, happens to
send a (subsequent) datagram while the server's socket changes its
address, but is not rehashed yet, this will result in a failed
lookup and a port unreachable error delivered to the client, as
apparent from the following reproducer:
LEN=$(($(cat /proc/sys/net/core/wmem_default) / 4))
dd if=/dev/urandom bs=1 count=${LEN} of=tmp.in
while :; do
taskset -c 1 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.1 || sleep 1
taskset -c 2 socat OPEN:tmp.in UDP4:localhost:1337,shut-null
wait
done
where the client will eventually get ECONNREFUSED on a write()
(typically the second or third one of a given iteration):
2024/11/13 21:28:23 socat[46901] E write(6, 0x556db2e3c000, 8192): Connection refused
This issue was first observed as a seldom failure in Podman's tests
checking UDP functionality while using pasta(1) to connect the
container's network namespace, which leads us to a reproducer with
the lookup error resulting in an ICMP packet on a tap device:
LOCAL_ADDR="$(ip -j -4 addr show|jq -rM '.[] | .addr_info[0] | select(.scope == "global").local')"
while :; do
./pasta --config-net -p pasta.pcap -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.2 || sleep 1
socat OPEN:tmp.in UDP4:${LOCAL_ADDR}:1337,shut-null
wait
cmp tmp.in tmp.out
done
Once this fails:
tmp.in tmp.out differ: char 8193, line 29
we can finally have a look at what's going on:
$ tshark -r pasta.pcap
1 0.000000 :: ? ff02::16 ICMPv6 110 Multicast Listener Report Message v2
2 0.168690 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
3 0.168767 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
4 0.168806 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
5 0.168827 c6:47:05:8d:dc:04 ? Broadcast ARP 42 Who has 88.198.0.161? Tell 88.198.0.164
6 0.168851 9a:55:9a:55:9a:55 ? c6:47:05:8d:dc:04 ARP 42 88.198.0.161 is at 9a:55:9a:55:9a:55
7 0.168875 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
8 0.168896 88.198.0.164 ? 88.198.0.161 ICMP 590 Destination unreachable (Port unreachable)
9 0.168926 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
10 0.168959 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
11 0.168989 88.198.0.161 ? 88.198.0.164 UDP 4138 60260 ? 1337 Len=4096
12 0.169010 88.198.0.161 ? 88.198.0.164 UDP 42 60260 ? 1337 Len=0
On the third datagram received, the network namespace of the container
initiates an ARP lookup to deliver the ICMP message.
In another variant of this reproducer, starting the client with:
strace -f pasta --config-net -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc 2>strace.log &
and connecting to the socat server using a loopback address:
socat OPEN:tmp.in UDP4:localhost:1337,shut-null
we can more clearly observe a sendmmsg() call failing after the
first datagram is delivered:
[pid 278012] connect(173, 0x7fff96c95fc0, 16) = 0
[...]
[pid 278012] recvmmsg(173, 0x7fff96c96020, 1024, MSG_DONTWAIT, NULL) = -1 EAGAIN (Resource temporarily unavailable)
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = 1
[...]
[pid 278012] sendmmsg(173, 0x561c5ad0a720, 1, MSG_NOSIGNAL) = -1 ECONNREFUSED (Connection refused)
and, somewhat confusingly, after a connect() on the same socket
succeeded.
Until commit 4cdeeee925 ("net: udp: prefer listeners bound to an
address"), the race between receive address change and lookup didn't
actually cause visible issues, because, once the lookup based on the
secondary hash chain failed, we would still attempt a lookup based on
the primary hash (destination port only), and find the socket with the
outdated secondary hash.
That change, however, dropped port-only lookups altogether, as side
effect, making the race visible.
To fix this, while avoiding the need to make address changes and
rehash atomic against lookups, reintroduce primary hash lookups as
fallback, if lookups based on four-tuple and secondary hashes fail.
To this end, introduce a simplified lookup implementation, which
doesn't take care of SO_REUSEPORT groups: if we have one, there are
multiple sockets that would match the four-tuple or secondary hash,
meaning that we can't run into this race at all.
v2:
- instead of synchronising lookup operations against address change
plus rehash, reintroduce a simplified version of the original
primary hash lookup as fallback
v1:
- fix build with CONFIG_IPV6=n: add ifdef around sk_v6_rcv_saddr
usage (Kuniyuki Iwashima)
- directly use sk_rcv_saddr for IPv4 receive addresses instead of
fetching inet_rcv_saddr (Kuniyuki Iwashima)
- move inet_update_saddr() to inet_hashtables.h and use that
to set IPv4/IPv6 addresses as suitable (Kuniyuki Iwashima)
- rebase onto net-next, update commit message accordingly
Reported-by: Ed Santiago <santiago@redhat.com>
Link: https://github.com/containers/podman/issues/24147
Analysed-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: 30fff9231f ("udp: bind() optimisation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a853c60950 ]
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b362f21d ]
inet_putpeer() will be removed in the following patch,
because we will no longer use refcounts.
Update inetpeer timestamp (p->dtime) at lookup time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c60950 ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a596a50c4 ]
All callers of inet_getpeer() want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c60950 ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 661cd8fc8e ]
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a853c60950 ("inetpeer: do not get a refcount in inet_getpeer()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e56ebde24 ]
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10685681ba ]
The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in
kernel as well.
This fixes the following syzkaller reported crash:
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x125/0x19f lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347
sfq_link net/sched/sch_sfq.c:210 [inline]
sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238
sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500
sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296
netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline]
dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362
__dev_close_many+0x214/0x350 net/core/dev.c:1468
dev_close_many+0x207/0x510 net/core/dev.c:1506
unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738
unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695
unregister_netdevice include/linux/netdevice.h:2893 [inline]
__tun_detach+0x6b6/0x1600 drivers/net/tun.c:689
tun_detach drivers/net/tun.c:705 [inline]
tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640
__fput+0x203/0x840 fs/file_table.c:280
task_work_run+0x129/0x1b0 kernel/task_work.c:185
exit_task_work include/linux/task_work.h:33 [inline]
do_exit+0x5ce/0x2200 kernel/exit.c:931
do_group_exit+0x144/0x310 kernel/exit.c:1046
__do_sys_exit_group kernel/exit.c:1057 [inline]
__se_sys_exit_group kernel/exit.c:1055 [inline]
__x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055
do_syscall_64+0x6c/0xd0
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fe5e7b52479
Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f.
RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0
R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270
The crash can be also be reproduced with the following (with a tc
recompiled to allow for sfq limits of 1):
tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s
../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1
ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1
Scenario that triggers the crash:
* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1
* TBF dequeues: it peeks from SFQ which moves the packet to the
gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so
it schedules itself for later.
* the second packet is sent and TBF tries to queues it to SFQ. qdisc
qlen is now 2 and because the SFQ limit is 1 the packet is dropped
by SFQ. At this point qlen is 1, and all of the SFQ slots are empty,
however q->tail is not NULL.
At this point, assuming no more packets are queued, when sch_dequeue
runs again it will decrement the qlen for the current empty slot
causing an underflow and the subsequent out of bounds access.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241204030520.2084663-2-tavip@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4650d7ae4 ]
SFQ has an assumption on dealing with packets smaller than 64KB.
Even before BIG TCP, TCA_STAB can provide arbitrary big values
in qdisc_pkt_len(skb)
It is time to switch (struct sfq_slot)->allot to a 32bit field.
sizeof(struct sfq_slot) is now 64 bytes, giving better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241008111603.653140-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 10685681ba ("net_sched: sch_sfq: don't allow 1 packet limit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c4f7714c ]
kunit_kzalloc() may return NULL, dereferencing it without NULL check may
lead to NULL dereference.
Add a NULL check for ies.
Fixes: 45d43937a4 ("wifi: cfg80211: add a kunit test for 6 GHz colocated AP parsing")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Link: https://patch.msgid.link/20241115063835.5888-1-zichenxie0106@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 91751e2482 upstream.
Recent reports have shown how we sometimes call vsock_*_has_data()
when a vsock socket has been de-assigned from a transport (see attached
links), but we shouldn't.
Previous commits should have solved the real problems, but we may have
more in the future, so to avoid null-ptr-deref, we can return 0
(no space, no data available) but with a warning.
This way the code should continue to run in a nearly consistent state
and have a warning that allows us to debug future problems.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/Z2K%2FI4nlHdfMRTZC@v4bel-B760M-AORUS-ELITE-AX/
Link: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/
Link: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/
Co-developed-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Co-developed-by: Wongi Lee <qwerty@theori.io>
Signed-off-by: Wongi Lee <qwerty@theori.io>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a24009bc9b upstream.
Transport's release() and destruct() are called when de-assigning the
vsock transport. These callbacks can touch some socket state like
sock flags, sk_state, and peer_shutdown.
Since we are reassigning the socket to a new transport during
vsock_connect(), let's reset these fields to have a clean state with
the new transport.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df137da9d6 upstream.
During virtio_transport_release() we can schedule a delayed work to
perform the closing of the socket before destruction.
The destructor is called either when the socket is really destroyed
(reference counter to zero), or it can also be called when we are
de-assigning the transport.
In the former case, we are sure the delayed work has completed, because
it holds a reference until it completes, so the destructor will
definitely be called after the delayed work is finished.
But in the latter case, the destructor is called by AF_VSOCK core, just
after the release(), so there may still be delayed work scheduled.
Refactor the code, moving the code to delete the close work already in
the do_close() to a new function. Invoke it during destruction to make
sure we don't leave any pending work.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Closes: https://lore.kernel.org/netdev/Z37Sh+utS+iV3+eb@v4bel-B760M-AORUS-ELITE-AX/
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Tested-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cb7c756f6 upstream.
If the socket has been de-assigned or assigned to another transport,
we must discard any packets received because they are not expected
and would cause issues when we access vsk->transport.
A possible scenario is described by Hyunwoo Kim in the attached link,
where after a first connect() interrupted by a signal, and a second
connect() failed, we can find `vsk->transport` at NULL, leading to a
NULL pointer dereference.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Reported-by: Wongi Lee <qwerty@theori.io>
Closes: https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6abafcd32 upstream.
Some of the core functions can only be called if the transport
has been assigned.
As Michal reported, a socket might have the transport at NULL,
for example after a failed connect(), causing the following trace:
BUG: kernel NULL pointer dereference, address: 00000000000000a0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+
RIP: 0010:vsock_connectible_has_data+0x1f/0x40
Call Trace:
vsock_bpf_recvmsg+0xca/0x5e0
sock_recvmsg+0xb9/0xc0
__sys_recvfrom+0xb3/0x130
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
So we need to check the `vsk->transport` in vsock_bpf_recvmsg(),
especially for connected sockets (stream/seqpacket) as we already
do in __vsock_connectible_recvmsg().
Fixes: 634f1a7110 ("vsock: support sockmap")
Cc: stable@vger.kernel.org
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/
Tested-by: Michal Luczaj <mhal@rbox.co>
Reported-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/
Tested-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e226d9259d upstream.
The wake-up condition currently implemented by mptcp_epollin_ready()
is wrong, as it could mark the MPTCP socket as readable even when
no data are present and the system is under memory pressure.
Explicitly check for some data being available in the receive queue.
Fixes: 5684ab1a0e ("mptcp: give rcvlowat some love")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-2-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ca06a2f65 upstream.
mptcp_cleanup_rbuf() is responsible to send acks when the user-space
reads enough data to update the receive windows significantly.
It tries hard to avoid acquiring the subflow sockets locks by checking
conditions similar to the ones implemented at the TCP level.
To avoid too much code duplication - the MPTCP protocol can't reuse the
TCP helpers as part of the relevant status is maintained into the msk
socket - and multiple costly window size computation, mptcp_cleanup_rbuf
uses a rough estimate for the most recently advertised window size:
the MPTCP receive free space, as recorded as at last-ack time.
Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect
a zero to non-zero win change in some corner cases, skipping the
tcp_cleanup_rbuf call and leaving the peer stuck.
After commit ea66758c17 ("tcp: allow MPTCP to update the announced
window"), MPTCP has actually cheap access to the announced window value.
Use it in mptcp_cleanup_rbuf() for a more accurate ack generation.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-1-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76201b5979 ]
Passing a sufficient amount of imix entries leads to invalid access to the
pkt_dev->imix_entries array because of the incorrect boundary check.
UBSAN: array-index-out-of-bounds in net/core/pktgen.c:874:24
index 20 is out of range for type 'imix_pkt [20]'
CPU: 2 PID: 1210 Comm: bash Not tainted 6.10.0-rc1 #121
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl lib/dump_stack.c:117
__ubsan_handle_out_of_bounds lib/ubsan.c:429
get_imix_entries net/core/pktgen.c:874
pktgen_if_write net/core/pktgen.c:1063
pde_write fs/proc/inode.c:334
proc_reg_write fs/proc/inode.c:346
vfs_write fs/read_write.c:593
ksys_write fs/read_write.c:644
do_syscall_64 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:130
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 52a62f8603 ("pktgen: Parse internet mix (imix) input")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
[ fp: allow to fill the array completely; minor changelog cleanup ]
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e55e4b41 ]
Commit in a fixes tag attempted to fix the issue in the following
sequence of calls:
do_output
-> ovs_vport_send
-> dev_queue_xmit
-> __dev_queue_xmit
-> netdev_core_pick_tx
-> skb_tx_hash
When device is unregistering, the 'dev->real_num_tx_queues' goes to
zero and the 'while (unlikely(hash >= qcount))' loop inside the
'skb_tx_hash' becomes infinite, locking up the core forever.
But unfortunately, checking just the carrier status is not enough to
fix the issue, because some devices may still be in unregistering
state while reporting carrier status OK.
One example of such device is a net/dummy. It sets carrier ON
on start, but it doesn't implement .ndo_stop to set the carrier off.
And it makes sense, because dummy doesn't really have a carrier.
Therefore, while this device is unregistering, it's still easy to hit
the infinite loop in the skb_tx_hash() from the OVS datapath. There
might be other drivers that do the same, but dummy by itself is
important for the OVS ecosystem, because it is frequently used as a
packet sink for tcpdump while debugging OVS deployments. And when the
issue is hit, the only way to recover is to reboot.
Fix that by also checking if the device is running. The running
state is handled by the net core during unregistering, so it covers
unregistering case better, and we don't really need to send packets
to devices that are not running anyway.
While only checking the running state might be enough, the carrier
check is preserved. The running and the carrier states seem disjoined
throughout the code and different drivers. And other core functions
like __dev_direct_xmit() check both before attempting to transmit
a packet. So, it seems safer to check both flags in OVS as well.
Fixes: 066b86787f ("net: openvswitch: fix race on port output")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Closes: https://mail.openvswitch.org/pipermail/ovs-discuss/2025-January/053423.html
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250109122225.4034688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3af60928a ]
As pointed out in the original comment, lookup in sockmap can return a TCP
ESTABLISHED socket. Such TCP socket may have had SO_ATTACH_REUSEPORT_EBPF
set before it was ESTABLISHED. In other words, a non-NULL sk_reuseport_cb
does not imply a non-refcounted socket.
Drop sk's reference in both error paths.
unreferenced object 0xffff888101911800 (size 2048):
comm "test_progs", pid 44109, jiffies 4297131437
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 9336483b):
__kmalloc_noprof+0x3bf/0x560
__reuseport_alloc+0x1d/0x40
reuseport_alloc+0xca/0x150
reuseport_attach_prog+0x87/0x140
sk_reuseport_attach_bpf+0xc8/0x100
sk_setsockopt+0x1181/0x1990
do_sock_setsockopt+0x12b/0x160
__sys_setsockopt+0x7b/0xc0
__x64_sys_setsockopt+0x1b/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 64d85290d7 ("bpf: Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250110-reuseport-memleak-v1-1-fa1ddab0adfe@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d1cacd7477 upstream.
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org
Fixes: 1287c1ae0f ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f5611cbc4 upstream.
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The per-netns structure can be obtained from the table->data using
container_of(), then the 'net' one can be retrieved from the listen
socket (if available).
Fixes: c6a58ffed5 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-9-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6259d2484d upstream.
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is
used.
Fixes: d1e462a7a5 ("sctp: add probe_interval in sysctl and sock/asoc/transport")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-8-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c10377bbc1 upstream.
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.
Fixes: 046c052b47 ("sctp: enable udp tunneling socks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-7-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15649fd541 upstream.
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.
Fixes: b14878ccb7 ("net: sctp: cache auth_enable per endpoint")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-6-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fc17b76fc upstream.
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.
Fixes: 4f3fdf3bc5 ("sctp: add check rto_min and rto_max in sysctl")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-5-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea62dd1383 upstream.
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is
used.
Fixes: 3c68198e75 ("sctp: Make hmac algorithm selection for cookie generation dynamic")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-4-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92cf7a51bd upstream.
As mentioned in the previous commit, using the 'net' structure via
'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'pernet' structure can be obtained from the table->data using
container_of().
Fixes: 27069e7cb3 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-3-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
