Clean-up: There doesn't seem to be a reason why this function is
stuck in a header. One thing it prevents is the convenient addition
of tracing. Moving it to a source file also makes the rq_respages
clean-up logic easier to find.
Reviewed-by: Calum Mackay <calum.mackay@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: All callers of svc_process() ignore its return value, so
svc_process() can safely be converted to return void. Ditto for
svc_send().
The return value of ->xpo_sendto() is now used only as part of a
trace event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There have been several bugs over the years where the NFSD splice
actor has attempted to write outside the rq_pages array.
This is a "should never happen" condition, but if for some reason
the pipe splice actor should attempt to walk past the end of
rq_pages, it needs to terminate the READ operation to prevent
corruption of the pointer addresses in the fields just beyond the
array.
A server crash is thus prevented. Since the code is not behaving,
the READ operation returns -EIO to the client. None of the READ
payload data can be trusted if the splice actor isn't operating as
expected.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The get_expiry() function currently returns a timestamp, and uses the
special return value of 0 to indicate an error.
Unfortunately this causes a problem when 0 is the correct return value.
On a system with no RTC it is possible that the boot time will be seen
to be "3". When exportfs probes to see if a particular filesystem
supports NFS export it tries to cache information with an expiry time of
"3". The intention is for this to be "long in the past". Even with no
RTC it will not be far in the future (at most a second or two) so this
is harmless.
But if the boot time happens to have been calculated to be "3", then
get_expiry will fail incorrectly as it converts the number to "seconds
since bootime" - 0.
To avoid this problem we change get_expiry() to report the error quite
separately from the expiry time. The error is now the return value.
The expiry time is reported through a by-reference parameter.
Reported-by: Jerry Zhang <jerry@skydio.com>
Tested-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
lockd needs to be able to hash filehandles for tracepoints. Move the
nfs_fhandle_hash() helper to a common nfs include file.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
After the wait for a grant is done (for whatever reason), nlmclnt_block
updates the status of the nlm_rqst with the status of the block. At the
point it does this, however, the block is still queued its status could
change at any time.
This is particularly a problem when the waiting task is signaled during
the wait. We can end up giving up on the lock just before the GRANTED_MSG
callback comes in, and accept it even though the lock request gets back
an error, leaving a dangling lock on the server.
Since the nlm_wait never lives beyond the end of nlmclnt_lock, put it on
the stack and add functions to allow us to enqueue and dequeue the
block. Enqueue it just before the lock/wait loop, and dequeue it
just after we exit the loop instead of waiting until the end of
the function. Also, scrape the status at the time that we dequeue it to
ensure that it's final.
Reported-by: Yongcheng Yang <yoyang@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2063818
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The next patch needs struct nlm_wait in fs/lockd/clntproc.c, so move
the definition to a shared header file. As an added clean-up, drop
the unused b_reclaim field.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
On most filesystems, there is no reason to delay reaping an nfsd_file
just because its underlying inode is still under writeback. nfsd just
relies on client activity or the local flusher threads to do writeback.
The main exception is NFS, which flushes all of its dirty data on last
close. Add a new EXPORT_OP_FLUSH_ON_CLOSE flag to allow filesystems to
signal that they do this, and only skip closing files under writeback on
such filesystems.
Also, remove a redundant NULL file pointer check in
nfsd_file_check_writeback, and clean up nfs's export op flag
definitions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-----BEGIN PGP SIGNATURE-----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=cMwX
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-04-24
We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 7 files changed, 87 insertions(+), 44 deletions(-).
The main changes are:
1) Workaround for bpf iter selftest due to lack of subprog support
in precision tracking, from Andrii.
2) Disable bpf_refcount_acquire kfunc until races are fixed, from Dave.
3) One more test_verifier test converted from asm macro to asm in C,
from Eduard.
4) Fix build with NETFILTER=y INET=n config, from Florian.
5) Add __rcu_read_{lock,unlock} into deny list, from Yafang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: avoid mark_all_scalars_precise() trigger in one of iter tests
bpf: Add __rcu_read_{lock,unlock} into btf id deny list
bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed
selftests/bpf: verifier/prevent_map_lookup converted to inline assembly
bpf: fix link failure with NETFILTER=y INET=n
====================
Link: https://lore.kernel.org/r/20230425005648.86714-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=T5eS
-----END PGP SIGNATURE-----
Merge tag 'nf-next-23-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Reduce jumpstack footprint: Stash chain in last rule marker in blob for
tracing. Remove last rule and chain from jumpstack. From Florian Westphal.
2) nf_tables validates all tables before committing the new rules.
Unfortunately, this has two drawbacks:
- Since addition of the transaction mutex pernet state gets written to
outside of the locked section from the cleanup callback, this is
wrong so do this cleanup directly after table has passed all checks.
- Revalidate tables that saw no changes. This can be avoided by
keeping the validation state per table, not per netns.
From Florian Westphal.
3) Get rid of a few redundant pointers in the traceinfo structure.
The three removed pointers are used in the expression evaluation loop,
so gcc keeps them in registers. Passing them to the (inlined) helpers
thus doesn't increase nft_do_chain text size, while stack is reduced
by another 24 bytes on 64bit arches. From Florian Westphal.
4) IPVS cleanups in several ways without implementing any functional
changes, aside from removing some debugging output:
- Update width of source for ip_vs_sync_conn_options
The operation is safe, use an annotation to describe it properly.
- Consistently use array_size() in ip_vs_conn_init()
It seems better to use helpers consistently.
- Remove {Enter,Leave}Function. These seem to be well past their
use-by date.
- Correct spelling in comments.
From Simon Horman.
5) Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
* tag 'nf-next-23-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: allow to create netdev chain without device
netfilter: nf_tables: support for deleting devices in an existing netdev chain
netfilter: nf_tables: support for adding new devices to an existing netdev chain
netfilter: nf_tables: rename function to destroy hook list
netfilter: nf_tables: do not send complete notification of deletions
netfilter: nf_tables: extended netlink error reporting for netdevice
ipvs: Correct spelling in comments
ipvs: Remove {Enter,Leave}Function
ipvs: Consistently use array_size() in ip_vs_conn_init()
ipvs: Update width of source for ip_vs_sync_conn_options
netfilter: nf_tables: do not store rule in traceinfo structure
netfilter: nf_tables: do not store verdict in traceinfo structure
netfilter: nf_tables: do not store pktinfo in traceinfo structure
netfilter: nf_tables: remove unneeded conditional
netfilter: nf_tables: make validation state per table
netfilter: nf_tables: don't write table validation state without mutex
netfilter: nf_tables: don't store chain address on jump
netfilter: nf_tables: don't store address of last rule on jump
netfilter: nf_tables: merge nft_rules_old structure and end of ruleblob marker
====================
Link: https://lore.kernel.org/r/20230421235021.216950-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes sure hci_cmd_sync_queue only queue new work if HCI_RUNNING
has been set otherwise there is a risk of commands being sent while
turning off.
Because hci_cmd_sync_queue can no longer queue work while HCI_RUNNING is
not set it cannot be used to power on adapters so instead
hci_cmd_sync_submit is introduced which bypass the HCI_RUNNING check, so
it behaves like the old implementation.
Link: https://lore.kernel.org/all/CAB4PzUpDMvdc8j2MdeSAy1KkAE-D3woprCwAdYWeOc-3v3c9Sw@mail.gmail.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ATS2851 based controller advertises support for command "LE Set Random
Private Address Timeout" but does not actually implement it, impeding the
controller initialization.
Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller
initialization.
< HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2
Timeout: 900 seconds
> HCI Event: Command Status (0x0f) plen 4
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
Status: Unknown HCI Command (0x01)
Co-developed-by: imoc <wzj9912@gmail.com>
Signed-off-by: imoc <wzj9912@gmail.com>
Signed-off-by: Raul Cheleguini <raul.cheleguini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When submitting HCI_OP_LE_CREATE_CIS the code shall wait for
HCI_EVT_LE_CIS_ESTABLISHED thus enforcing the serialization of
HCI_OP_LE_CREATE_CIS as the Core spec does not allow to send them in
parallel:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2566:
If the Host issues this command before all the HCI_LE_CIS_Established
events from the previous use of the command have been generated, the
Controller shall return the error code Command Disallowed (0x0C).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes only matching CIS by address which prevents creating new hcon
if upper layer is requesting a specific CIS ID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since it is required for some configurations to have multiple CIS with
the same peer which is now covered by iso-tester in the following test
cases:
ISO AC 6(i) - Success
ISO AC 7(i) - Success
ISO AC 8(i) - Success
ISO AC 9(i) - Success
ISO AC 11(i) - Success
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables 2M and Coded PHY by default if they are marked as supported
in the LE features bits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Split bt_iso_qos into dedicated unicast and broadcast
structures and add additional broadcast parameters.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add devcoredump APIs to hci core so that drivers only have to provide
the dump skbs instead of managing the synchronization and timeouts.
The devcoredump APIs should be used in the following manner:
- hci_devcoredump_init is called to allocate the dump.
- hci_devcoredump_append is called to append any skbs with dump data
OR hci_devcoredump_append_pattern is called to insert a pattern.
- hci_devcoredump_complete is called when all dump packets have been
sent OR hci_devcoredump_abort is called to indicate an error and
cancel an ongoing dump collection.
The high level APIs just prepare some skbs with the appropriate data and
queue it for the dump to process. Packets part of the crashdump can be
intercepted in the driver in interrupt context and forwarded directly to
the devcoredump APIs.
Internally, there are 5 states for the dump: idle, active, complete,
abort and timeout. A devcoredump will only be in active state after it
has been initialized. Once active, it accepts data to be appended,
patterns to be inserted (i.e. memset) and a completion event or an abort
event to generate a devcoredump. The timeout is initialized at the same
time the dump is initialized (defaulting to 10s) and will be cleared
either when the timeout occurs or the dump is complete or aborted.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds serdev_device_break_ctl() and an implementation for ttyport.
This function simply calls the break_ctl in tty layer, which can
assert a break signal over UART-TX line, if the tty and the
underlying platform and UART peripheral supports this operation.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This replaces all instances of ENOTSUPP with EOPNOTSUPP since ENOTSUPP
is not a standard error code. This will help maintain consistency in
error codes when new serdev API's are added.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some adapters (e.g. RTL8723CS) advertise that they have more than
2 pages for local ext features, but they don't support any features
declared in these pages. RTL8723CS reports max_page = 2 and declares
support for sync train and secure connection, but it responds with
either garbage or with error in status on corresponding commands.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Bastian Germann <bage@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This delays the identity address updates to give time for userspace to
process the new address otherwise there is a risk that userspace
creates a duplicated device if the MGMT event is delayed for some
reason.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes hci_conn_hash_add append to the tail of the conn_hash so it
matches the order they are created, this is required if the controller
attempts to match the order of ACL with CIS which uses append logic
when programming the CIS ids on the CIG.
The result of this change affects Create CIS:
Before:
< HCI Command: LE Create Connected Isochronous Stream (0x08|0x0064) plen 9
Number of CIS: 2
CIS Handle: 2560
ACL Handle: 3586
CIS Handle: 2561
ACL Handle: 3585
After:
< HCI Command: LE Create Connected Isochronous Stream (0x08|0x0064) plen 9
Number of CIS: 2
CIS Handle: 2560
ACL Handle: 3585
CIS Handle: 2561
ACL Handle: 3586
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes use of BIT macro when defining bitfields which makes it
clearer what bit it is toggling.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ocelot_xmit_get_vlan_info() calls __skb_vlan_pop() as the most
appropriate helper I could find which strips away a VLAN header.
That's all I need it to do, but __skb_vlan_pop() has more logic, which
will become incompatible with the future revert of commit 6d1ccff627
("net: reset mac header in dev_start_xmit()").
Namely, it performs a sanity check on skb_mac_header(), which will stop
being set after the above revert, so it will return an error instead of
removing the VLAN tag.
ocelot_xmit_get_vlan_info() gets called in 2 circumstances:
(1) the port is under a VLAN-aware bridge and the bridge sends
VLAN-tagged packets
(2) the port is under a VLAN-aware bridge and somebody else (an 8021q
upper) sends VLAN-tagged packets (using a VID that isn't in the
bridge vlan tables)
In case (1), there is actually no bug to defend against, because
br_dev_xmit() calls skb_reset_mac_header() and things continue to work.
However, in case (2), illustrated using the commands below, it can be
seen that our intervention is needed, since __skb_vlan_pop() complains:
$ ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set $eth master br0 && ip link set $eth up
$ ip link add link $eth name $eth.100 type vlan id 100 && ip link set $eth.100 up
$ ip addr add 192.168.100.1/24 dev $eth.100
I could fend off the checks in __skb_vlan_pop() with some
skb_mac_header_was_set() calls, but seeing how few callers of
__skb_vlan_pop() there are from TX paths, that seems rather
unproductive.
As an alternative solution, extract the bare minimum logic to strip a
VLAN header, and move it to a new helper named vlan_remove_tag(), close
to the definition of vlan_insert_tag(). Document it appropriately and
make ocelot_xmit_get_vlan_info() call this smaller helper instead.
Seeing that it doesn't appear illegal to test skb->protocol in the TX
path, I guess it would be a good for vlan_remove_tag() to also absorb
the vlan_set_encap_proto() function call.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to skb_eth_hdr() introduced in commit 96cc4b6958 ("macvlan: do
not assume mac_header is set in macvlan_broadcast()"), let's introduce a
skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get
to the VLAN header based on skb->data rather than based on the
skb_mac_header(skb).
We also consolidate the drivers that dereference skb->data to go through
this helper.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preparatory change for the deletion of skb_reset_mac_header(skb)
from __dev_queue_xmit(). After that deletion, skb_mac_header(skb) will
no longer be set in TX paths, from which __vlan_insert_inner_tag() can
still be called (perhaps indirectly).
If we don't make this change, then an unset MAC header (equal to ~0U)
will become set after the adjustment with VLAN_HLEN.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We use napi_threaded_poll() in order to reduce our softirq dependency.
We can add a followup of 821eba962d ("net: optimize napi_schedule_rps()")
to further remove the need of firing NET_RX_SOFTIRQ whenever
RPS/RFS are used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly check if NETFILTER_BPF_LINK is enabled, else configs
that have NETFILTER=y but CONFIG_INET=n fail to link:
> kernel/bpf/syscall.o: undefined reference to `netfilter_prog_ops'
> kernel/bpf/verifier.o: undefined reference to `netfilter_verifier_ops'
Fixes: fd9c663b9a ("bpf: minimal support for programs hooked into netfilter framework")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304220903.fRZTJtxe-lkp@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230422073544.17634-1-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If the rxrpc call set up by afs_make_call() receives an error whilst it is
transmitting the request, there's the possibility that it may get to the
point the rxrpc call is ended (after the error_kill_call label) just as the
call is queued for async processing.
This could manifest itself as call->rxcall being seen as NULL in
afs_deliver_to_call() when it tries to lock the call.
Fix this by splitting rxrpc_kernel_end_call() into a function to shut down
an rxrpc call and a function to release the caller's reference and calling
the latter only when we get to afs_put_call().
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing+fedora36_64checkkafs-build-306@auristor.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Dragos Improves RX page pool, and provides some fixes to his previous series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmRB6HcACgkQSD+KveBX
+j4+nAf/cCJ7poDQQOp/Oug6H3xn/COYPv3Iasl0dhT8yu+LlNMQTF0bRrU4UpAQ
aIKcja2biOBAnD96EhA1nJoo9bJUTtKLokUDDyK/xRHS+wIyr8Lia6vxTz1yjj3C
jDqX3+ZP4rFuhAvh+92AT1I0JvS0g+ocokPVKmm+Pwf4y7sG69CZ7phVGSc0iFfT
y+gnP4C6cdIr7kNLByeeX6alDHL/q83vfNFWrugRPna2uXjcSR5Gtp03pJ0OVkI5
qHxG7Bz0BE/hcMYwNcNVTu/5e02+5PS6B8kN/ho5DkhVFhp+h17XWWvOMZxC3jfI
k0ijRSWocG1jIgRgkioBRgzXmc6nNw==
=jUe8
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-20
1) Dragos Improves RX page pool, and provides some fixes to his previous
series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
* tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Update op_mode to op_mod for port selection
net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()
net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()
net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()
net/mlx5e: RX, Hook NAPIs to page pools
net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case
net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ
net/mlx5e: Add vnic devlink health reporter to representors
net/mlx5: Add vnic devlink health reporter to PFs/VFs
Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"
Revert "net/mlx5: Expose steering dropped packets counter"
net/mlx5: DR, Add memory statistics for domain object
net/mlx5: DR, Add more info in domain dbg dump
net/mlx5: DR, Calculate sync threshold of each pool according to its type
net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump
====================
Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZELn8wAKCRDbK58LschI
g1khAQC1nmXPuKjM4EAfFK8Ysb3KoF8ADmpE97n+/HEDydCagwD/bX0+NABR75Nh
ueGcoU1TcfcbshDzrH0s+C95owZDZw4=
=BeZM
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-21
We've added 71 non-merge commits during the last 8 day(s) which contain
a total of 116 files changed, 13397 insertions(+), 8896 deletions(-).
The main changes are:
1) Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward,
from Florian Westphal.
2) Fix race between btf_put and btf_idr walk which caused a deadlock,
from Alexei Starovoitov.
3) Second big batch to migrate test_verifier unit tests into test_progs
for ease of readability and debugging, from Eduard Zingerman.
4) Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree, from Dave Marchevsky.
5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF
selftests into libbpf-provided bpf_helpers.h header and improve
kfunc handling, from Andrii Nakryiko.
6) Support 64-bit pointers to kfuncs needed for archs like s390x,
from Ilya Leoshkevich.
7) Support BPF progs under getsockopt with a NULL optval,
from Stanislav Fomichev.
8) Improve verifier u32 scalar equality checking in order to enable
LLVM transformations which earlier had to be disabled specifically
for BPF backend, from Yonghong Song.
9) Extend bpftool's struct_ops object loading to support links,
from Kui-Feng Lee.
10) Add xsk selftest follow-up fixes for hugepage allocated umem,
from Magnus Karlsson.
11) Support BPF redirects from tc BPF to ifb devices,
from Daniel Borkmann.
12) Add BPF support for integer type when accessing variable length
arrays, from Feng Zhou.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits)
selftests/bpf: verifier/value_ptr_arith converted to inline assembly
selftests/bpf: verifier/value_illegal_alu converted to inline assembly
selftests/bpf: verifier/unpriv converted to inline assembly
selftests/bpf: verifier/subreg converted to inline assembly
selftests/bpf: verifier/spin_lock converted to inline assembly
selftests/bpf: verifier/sock converted to inline assembly
selftests/bpf: verifier/search_pruning converted to inline assembly
selftests/bpf: verifier/runtime_jit converted to inline assembly
selftests/bpf: verifier/regalloc converted to inline assembly
selftests/bpf: verifier/ref_tracking converted to inline assembly
selftests/bpf: verifier/map_ptr_mixing converted to inline assembly
selftests/bpf: verifier/map_in_map converted to inline assembly
selftests/bpf: verifier/lwt converted to inline assembly
selftests/bpf: verifier/loops1 converted to inline assembly
selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly
selftests/bpf: verifier/direct_packet_access converted to inline assembly
selftests/bpf: verifier/d_path converted to inline assembly
selftests/bpf: verifier/ctx converted to inline assembly
selftests/bpf: verifier/btf_ctx_access converted to inline assembly
selftests/bpf: verifier/bpf_get_stack converted to inline assembly
...
====================
Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct some spelling errors flagged by codespell and found by inspection.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove EnterFunction and LeaveFunction.
These debugging macros seem well past their use-by date. And seem to
have little value these days. Removing them allows some trivial cleanup
of some exit paths for some functions. These are also included in this
patch. There is likely scope for further cleanup of both debugging and
unwind paths. But let's leave that for another day.
Only intended to change debug output, and only when CONFIG_IP_VS_DEBUG
is enabled. Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In ip_vs_sync_conn_v0() copy is made to struct ip_vs_sync_conn_options.
That structure looks like this:
struct ip_vs_sync_conn_options {
struct ip_vs_seq in_seq;
struct ip_vs_seq out_seq;
};
The source of the copy is the in_seq field of struct ip_vs_conn. Whose
type is struct ip_vs_seq. Thus we can see that the source - is not as
wide as the amount of data copied, which is the width of struct
ip_vs_sync_conn_option.
The copy is safe because the next field in is another struct ip_vs_seq.
Make use of struct_group() to annotate this.
Flagged by gcc-13 as:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/timex.h:5,
from ./include/linux/timex.h:67,
from ./include/linux/time32.h:13,
from ./include/linux/time.h:60,
from ./include/linux/stat.h:19,
from ./include/linux/module.h:13,
from net/netfilter/ipvs/ip_vs_sync.c:38:
In function 'fortify_memcpy_chk',
inlined from 'ip_vs_sync_conn_v0' at net/netfilter/ipvs/ip_vs_sync.c:606:3:
./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
529 | __read_overflow2_field(q_size_field, size);
|
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pass it as argument instead. This reduces size of traceinfo to
16 bytes. Total stack usage:
nf_tables_core.c:252 nft_do_chain 304 static
While its possible to also pass basechain as argument, doing so
increases nft_do_chaininfo function size.
Unlike pktinfo/verdict/rule the basechain info isn't used in
the expression evaluation path. gcc places it on the stack, which
results in extra push/pop when it gets passed to the trace helpers
as argument rather than as part of the traceinfo structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Just pass it as argument to nft_trace_notify. Stack is reduced by 8 bytes:
nf_tables_core.c:256 nft_do_chain 312 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pass it as argument. No change in object size.
stack usage decreases by 8 byte:
nf_tables_core.c:254 nft_do_chain 320 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We only need to validate tables that saw changes in the current
transaction.
The existing code revalidates all tables, but this isn't needed as
cross-table jumps are not allowed (chains have table scope).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ->cleanup callback needs to be removed, this doesn't work anymore as
the transaction mutex is already released in the ->abort function.
Just do it after a successful validation pass, this either happens
from commit or abort phases where transaction mutex is held.
Fixes: f102d66b33 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that the rule trailer/end marker and the rcu head reside in the
same structure, we no longer need to save/restore the chain pointer
when performing/returning from a jump.
We can simply let the trace infra walk the evaluated rule until it
hits the end marker and then fetch the chain pointer from there.
When the rule is NULL (policy tracing), then chain and basechain
pointers were already identical, so just use the basechain.
This cuts size of jumpstack in half, from 256 to 128 bytes in 64bit,
scripts/stackusage says:
nf_tables_core.c:251 nft_do_chain 328 static
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
add glue code so a bpf program can be run using userspace-provided
netfilter state and packet/skb.
Default is to use ipv4:output hook point, but this can be overridden by
userspace. Userspace provided netfilter state is restricted, only hook and
protocol families can be overridden and only to ipv4/ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-7-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This allows userspace ("nft list hooks") to show which bpf program
is attached to which hook.
Without this, user only knows bpf prog is attached at prio
x, y, z at INPUT and FORWARD, but can't tell which program is where.
v4: kdoc fixups (Simon Horman)
Link: https://lore.kernel.org/bpf/ZEELzpNCnYJuZyod@corigine.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-4-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This adds minimal support for BPF_PROG_TYPE_NETFILTER bpf programs
that will be invoked via the NF_HOOK() points in the ip stack.
Invocation incurs an indirect call. This is not a necessity: Its
possible to add 'DEFINE_BPF_DISPATCHER(nf_progs)' and handle the
program invocation with the same method already done for xdp progs.
This isn't done here to keep the size of this chunk down.
Verifier restricts verdicts to either DROP or ACCEPT.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-3-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_link support skeleton. To keep this reviewable, no bpf program
can be invoked yet, if a program is attached only a c-stub is called and
not the actual bpf program.
Defaults to 'y' if both netfilter and bpf syscall are enabled in kconfig.
Uapi example usage:
union bpf_attr attr = { };
attr.link_create.prog_fd = progfd;
attr.link_create.attach_type = 0; /* unused */
attr.link_create.netfilter.pf = PF_INET;
attr.link_create.netfilter.hooknum = NF_INET_LOCAL_IN;
attr.link_create.netfilter.priority = -128;
err = bpf(BPF_LINK_CREATE, &attr, sizeof(attr));
... this would attach progfd to ipv4:input hook.
Such hook gets removed automatically if the calling program exits.
BPF_NETFILTER program invocation is added in followup change.
NF_HOOK_OP_BPF enum will eventually be read from nfnetlink_hook, it
allows to tell userspace which program is attached at the given hook
when user runs 'nft hook list' command rather than just the priority
and not-very-helpful 'this hook runs a bpf prog but I can't tell which
one'.
Will also be used to disallow registration of two bpf programs with
same priority in a followup patch.
v4: arm32 cmpxchg only supports 32bit operand
s/prio/priority/
v3: restrict prog attachment to ip/ip6 for now, lets lift restrictions if
more use cases pop up (arptables, ebtables, netdev ingress/egress etc).
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230421170300.24115-2-fw@strlen.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ck6R
-----END PGP SIGNATURE-----
Merge tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Set on IPS_CONFIRMED before change_status() otherwise EBUSY is
bogusly hit. This bug was introduced in the 6.3 release cycle.
2) Fix nfnetlink_queue conntrack support: Set/dump timeout
accordingly for unconfirmed conntrack entries. Make sure this
is done after IPS_CONFIRMED is set on. This is an old bug, it
happens since the introduction of this feature.
* tag 'nf-23-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix wrong ct->timeout value
netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()
====================
Link: https://lore.kernel.org/r/20230421105700.325438-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
* fix some Fine Time Measurement (FTM) frames not being bufferable
* flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
* preparation for Wi-Fi 7 EHT and multi-link support
rtw88
* SDIO bus support
* RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
* framework firmware backwards compatibility
brcmfmac
* Cypress 43439 SDIO support
mt76
* mt7921 P2P support
* mt7996 mesh A-MSDU support
* mt7996 EHT support
* mt7996 coredump support
wcn36xx
* support for pronto v3 hardware
ath11k
* PCIe DeviceTree bindings
* WCN6750: enable SAR support
ath10k
* convert DeviceTree bindings to YAML
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmRCaTURHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvcRwf+NcLS4HbmqGZhBxl2LZVZ6AFCBM4ijDlO
pxdMiC4UxT+UApY1/9YXo0VS97M7paDJH+R/g1HcTvvKURHCmsdhYHm+R1MH+/uD
r8RfvJg4VtNnlUpsJh9jxt+e697KP15M7DF0sFlQzdIoTUl13Hp7YhI76zunAbAN
u1FBcVVJiCcJWbLolMzqAeBMUWUEG+GtHF6Zn5kChVU/p1nmwJMPUG3Qvb61a7Yc
BM1pQX8jQ8PBj+VrGPGvqX0BOdbxq0evauYScq2oTOhQ1fzTNWOsI1yI7AwApptR
itwQ2t1UK/C/EWpvWIBSd0nit1uwSx0Zsu/nSZlbKbrvIFwd5XnfwQ==
=Irrd
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.4
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
- fix some Fine Time Measurement (FTM) frames not being bufferable
- flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
- preparation for Wi-Fi 7 EHT and multi-link support
rtw88
- SDIO bus support
- RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
- framework firmware backwards compatibility
brcmfmac
- Cypress 43439 SDIO support
mt76
- mt7921 P2P support
- mt7996 mesh A-MSDU support
- mt7996 EHT support
- mt7996 coredump support
wcn36xx
- support for pronto v3 hardware
ath11k
- PCIe DeviceTree bindings
- WCN6750: enable SAR support
ath10k
- convert DeviceTree bindings to YAML
* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
wifi: rtw88: Update spelling in main.h
wifi: airo: remove ISA_DMA_API dependency
wifi: rtl8xxxu: Simplify setting the initial gain
wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
wifi: rtl8xxxu: Don't print the vendor/product/serial
wifi: rtw88: Fix memory leak in rtw88_usb
wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
wifi: rtw88: rtw8821c: Fix rfe_option field width
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: 8822c: add iface combination
wifi: rtw88: handle station mode concurrent scan with AP mode
wifi: rtw88: prevent scan abort with other VIFs
wifi: rtw88: refine reserved page flow for AP mode
wifi: rtw88: disallow PS during AP mode
wifi: rtw88: 8822c: extend reserved page number
wifi: rtw88: add port switch for AP mode
wifi: rtw88: add bitmap for dynamic port settings
wifi: rtw89: mac: use regular int as return type of DLE buffer request
wifi: mac80211: remove return value check of debugfs_create_dir()
...
====================
Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
