Commit graph

752,318 commits

Author SHA1 Message Date
weiyi.lu@mediatek.com
9f99712661 soc: mediatek: update power domain data of MT2712
1. split MFG power domain into MFG/MFG_SC1/MFG_SC2/MFG_SC3
according to MT2712 ECO design change
2. add subdomain support for MT2712

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-19 02:29:05 +01:00
weiyi.lu@mediatek.com
1390515aed dt-bindings: soc: update MT2712 power dt-bindings
Add new power domains(MFG_SC1/MFG_SC2/MFG_SC3)
for MT2712 according to ECO design change.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-19 02:29:04 +01:00
Mylène Josserand
e4fe156ae8
ASoC: Add bindings for PCM1789
Add a device-tree binding for Texas Instrument's PCM1789 codec.
For the moment, only I2C bus is supported but SPI could be added
in future.

Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-19 09:24:14 +08:00
Mylène Josserand
4ae340d1be
ASoC: codecs: Add support for PCM1789
Add Texas Instruments's PCM1789 DAC support.
It is a simple DAC and does not have many registers.

One particularity about this DAC is that the clocks must be
always enabled. Also, an entire software reset is necessary
while starting to play a sound otherwise, the clocks are not
synchronized (so the DAC is not able to send data).

Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-19 09:23:59 +08:00
Geert Uytterhoeven
da263026c0
ASoC: rsnd: Document R-Car M3-W support
Document support for the sound modules in the Renesas M3-W (r8a7796)
SoC.

No driver update is needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 18:00:58 -07:00
weiyongjun (A)
c0153b126c
ASoC: da7210: Use devm_snd_soc_register_component()
Since the remove callback is removed, the snd_soc_unregister_component()
is missing when remove device. Using devm_snd_soc_register_component()
instead of snd_soc_register_component().

Fixes: d06f33aed8 ("ASoC: da7210: replace codec to component")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:59:39 -07:00
Krzysztof Kozlowski
3b84574d95
ASoC: samsung: Mark unused Odroid compatibles as deprecated
Compatible for XU4 audio is not being used.  Instead the board uses the
same compatible as XU3.  The devices are now just compatible so they
should use the same value.  Mark "hardkernel,odroid-xu4-audio" as being
deprecated so in this future could be removed to limit useless
properties.

Additionally add older compatibles appearing in the bindings.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:59:33 -07:00
weiyongjun (A)
822e70a821
ASoC: wm8400: Use devm_snd_soc_register_component()
Since the remove callback is removed, the snd_soc_unregister_component()
is missing when remove device. Using devm_snd_soc_register_component()
instead of snd_soc_register_component().

Fixes: 10dc44c646 ("ASoC: wm8400: replace codec to component")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:59:27 -07:00
Wei Yongjun
66717d787a
ASoC: mediatek: mt2701: drop unnessary snd_soc_unregister_component()
It's not necessary to unregister a component registered
with devm_snd_soc_register_component().

Fixes: f1b5bf0736 ("ASoC: mt2701/mt8173: replace platform to componen")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:58:59 -07:00
Katsuhiro Suzuki
7c3c20f2be
ASoC: uniphier: add syscon property for UniPhier sound system
This patch adds syscon property for specifying soc-glue core.

Currently, soc-glue core is used for changing the state of S/PDIF
signal output pin to signal output state or Hi-Z state. After
resetting of SoC Hi-Z state is selected. This driver set to signal
output state when syscon property is available.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:57:54 -07:00
Katsuhiro Suzuki
8bde8fd64d
ASoC: uniphier: add syscon property to binding document
This patch adds syscon property for specifying soc-glue core into
DT binding documentation.

Currently, soc-glue core is used for changing the state of S/PDIF
signal output pin to signal output state or Hi-Z state. If you don't
need to use features on soc-glue described above you can ommit this
property.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:57:48 -07:00
Alexey Khoroshilov
7c2861a6fb
spi: jcore: disable ref_clk after getting its rate
The driver does not disable ref_clk on remove.
According to the comment, the only reason to enable the clock is to get
its rate. So, it should be safe to disable clk just after that.

By the way, clk_prepare_enable() looks to be more appropriate
than clk_enable() here.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:57:42 -07:00
Linus Walleij
6e9554a48b gpio: ks8695: Include the right header
This driver is a pure GPIO driver and should only include
<linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:31 +01:00
Linus Walleij
430f649987 gpio: kempld: Include the right header
This driver is a pure GPIO driver and should only include
<linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:31 +01:00
Linus Walleij
96d0d03dc4 gpio: janz-ttl: Use BIT() macro
This makes the code more readable by using the BIT() macro.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:30 +01:00
Linus Walleij
1c947b7f48 gpio: janz-ttl: Include the right header
This driver is a pure GPIO driver and should only include
<linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:30 +01:00
Linus Walleij
c3a174036f gpio: it87: Include the right header
This driver is a pure GPIO driver and should only include
<linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:29 +01:00
Linus Walleij
7a8fd1f5cc gpio: ich: Use BIT() macro
Using BIT() makes (1 << foo) constructions easier to read, and
also account for common mistakes where bit 31 is not working
because of numbers being interpreted as negative unless
specified as unsigned.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:29 +01:00
Linus Walleij
3f4290d4dc gpio: ich: Include the right header
This driver is a pure GPIO driver and should only include
<linux/gpio/driver.h>. Refrain from using GPIOF_* flags in
the driver, just use 1/0 to return direction.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:29 +01:00
Linus Walleij
f63109f0cb gpio: htc-gpio: Include the right header
This driver is a pure GPIO driver and should only include
<linux/gpio/driver.h>. Drop the include of <linux/gpio.h>
from the platform data header as well, it serves no purpose.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:28 +01:00
Linus Walleij
00d712a930 gpio: grgpio: Include the right header
This driver is a pure GPIO driver and should only include
<linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:28 +01:00
Linus Walleij
7113ea8a8f gpio: ftgpio010: Drop of_gpio.h include
This driver does not make use of the functions in
<linux/of_gpio.h> so drop this include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:24 +01:00
Linus Walleij
7275cb75b9 gpio: em: Use the right include
The Emma Mobile (EM) GPIO driver uses the too generic include
<linux/gpio.h>. It is a driver so it should just use
<linux/gpio/driver.h>.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:07 +01:00
Linus Walleij
d90f2adee4 gpio: ge: Drop of_gpio.h include
This driver does not make use of the functions in
<linux/of_gpio.h> so drop this include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:07 +01:00
Linus Walleij
1cb6610aec gpio: dln2: Include proper header
This driver has no business including <linux/gpio.h>, it is a
driver so include <linux/gpio/driver.h>.

GPIOF_DIR_IN/GPIOF_DIR_OUT are for consumers and should not be
used in drivers to use just 1/0 instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-19 01:50:07 +01:00
Linus Torvalds
c698ca5278 Linux 4.16-rc6 v4.16-rc6 2018-03-18 17:48:42 -07:00
Sylwester Nawrocki
c15619a88a dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
The #sound-dai-cells DT property is required to describe link between
the HDMI IP block and the SoC's audio subsystem.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-03-19 08:42:53 +09:00
Paul Mackerras
58c5c276b4 KVM: PPC: Book3S HV: Handle 1GB pages in radix page fault handler
This adds code to the radix hypervisor page fault handler to handle the
case where the guest memory is backed by 1GB hugepages, and put them
into the partition-scoped radix tree at the PUD level.  The code is
essentially analogous to the code for 2MB pages.  This also rearranges
kvmppc_create_pte() to make it easier to follow.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-03-19 10:08:53 +11:00
Paul Mackerras
f7caf712d8 KVM: PPC: Book3S HV: Streamline setting of reference and change bits
When using the radix MMU, we can get hypervisor page fault interrupts
with the DSISR_SET_RC bit set in DSISR/HSRR1, indicating that an
attempt to set the R (reference) or C (change) bit in a PTE atomically
failed.  Previously we would find the corresponding Linux PTE and
check the permission and dirty bits there, but this is not really
necessary since we only need to do what the hardware was trying to
do, namely set R or C atomically.  This removes the code that reads
the Linux PTE and just update the partition-scoped PTE, having first
checked that it is still present, and if the access is a write, that
the PTE still has write permission.

Furthermore, we now check whether any other relevant bits are set
in DSISR, and if there are, then we proceed with the rest of the
function in order to handle whatever condition they represent,
instead of returning to the guest as we did previously.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-03-19 10:08:44 +11:00
Paul Mackerras
c4c8a7643e KVM: PPC: Book3S HV: Radix page fault handler optimizations
This improves the handling of transparent huge pages in the radix
hypervisor page fault handler.  Previously, if a small page is faulted
in to a 2MB region of guest physical space, that means that there is
a page table pointer at the PMD level, which could never be replaced
by a leaf (2MB) PMD entry.  This adds the code to clear the PMD,
invlidate the page walk cache and free the page table page in this
situation, so that the leaf PMD entry can be created.

This also adds code to check whether a PMD or PTE being inserted is
the same as is already there (because of a race with another CPU that
faulted on the same page) and if so, we don't replace the existing
entry, meaning that we don't invalidate the PTE or PMD and do a TLB
invalidation.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-03-19 10:08:38 +11:00
Paul Mackerras
39c983ea0f KVM: PPC: Remove unused kvm_unmap_hva callback
Since commit fb1522e099 ("KVM: update to new mmu_notifier semantic
v2", 2017-08-31), the MMU notifier code in KVM no longer calls the
kvm_unmap_hva callback.  This removes the PPC implementations of
kvm_unmap_hva().

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-03-19 10:08:29 +11:00
Viresh Kumar
bf14721c97 cpufreq: powernv: Don't validate the frequency table twice
The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from powernv driver.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-19 00:04:56 +01:00
Joe Konno
ef74b5bf22 powercap: RAPL: Add support for Cannon Lake
RAPL MSRs and handling for Cannon Lake are similar to Sky Lake
and Kaby Lake.

Signed-off-by: Joe Konno <joe.konno@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-19 00:02:24 +01:00
Rafael J. Wysocki
fa54150aad ACPI / PM: Reduce LPI constraints logging noise
If a device referred to by ACPI LPI constrains (coming from function 1
of the Low Power S0 Idle _DSM interface) is not power-manageable via
ACPI (no _PS0 method and no power resources), the code generating
diagnostic information for the LPI constraints will print a message
about that to the kernel log on every system suspend-resume cycle
(possibly for multiple times).

That is not very useful and noisy, so modify that code to disregard
the LPI list entries corresponding to the devices that are not power-
manageable after printing that information for them once.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2018-03-18 23:55:01 +01:00
Randy Dunlap
7e46b32bd5 ACPI / Kconfig: Update ACPI_PROCFS_POWER help text
Fix grammar and punctuation (end sentences with a period) in the
Kconfig help text for ACPI_PROCFS_POWER.

I was looking at this since it appears to be going away (again,
some day) and I have a working script that uses this info to tell me
battery usage. I can update the script to use /sys/class/power_supply
(in theory) but the contents (with units) should be documented in
Documentation/ABI/ before /proc/acpi/battery/ is removed (IMO).

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18 23:49:42 +01:00
Christophe JAILLET
99a31adfb2 remoteproc: imx_rproc: Slightly simplify code in 'imx_rproc_probe()'
We can return directly at the beginning of the function and save the 'err'
label.
We can also explicitly return 0 when the probe succeed.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-18 15:43:46 -07:00
Christophe JAILLET
96a30d7f91 remoteproc: imx_rproc: Re-use existing error handling path in 'imx_rproc_probe()'
Avoid some code ducplication and be more future-proof.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-18 15:43:46 -07:00
Christophe JAILLET
de6f83f85b remoteproc: imx_rproc: Fix an error handling path in 'imx_rproc_probe()'
If 'of_device_get_match_data()' fails, we must undo the previous
'rproc_alloc()' call.

Fixes: a0ff4aa6f0 ("remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-18 15:43:46 -07:00
Alex Hung
9251a71db6 ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3
A number of Dell systems require an OEM _OSI string "Linux-Dell-Video"
as a BIOS workaround to disable RTD3 which causes systems hangs when
NVidia graphics cards are installed.  The affected Dell systems are
with system IDs: 0818, 0819, 0820, 0850, 0851, 086F, 0870, 0885 and
0886.

The form of the OEM _OSI strings is defined by each OEMs and is
discussed in Documentation/acpi/osi.txt.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-18 23:42:33 +01:00
Giulio Benetti
c235edcb34
ARM: dts: sun8i-h3: Add Mali node
The H3 has an ARM Mali 400 GPU, so add binding to our DT.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-18 22:57:21 +01:00
Sean Wang
58b369679e arm: dts: mt7623: use - instead of _ in DT node name
It should be good that no use "_" is in DT node name. Consequently,
those nodes in certain files which have an inappropriate name containing
"_" are all being replaced with "-".

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18 22:44:03 +01:00
Sean Wang
f59c89df65 arm: dts: mt7623: remove useless property pinctrl-names at node switch@0
The property pinctrl-names is totally superfluous. It would be good to
remove the property to keep the node neatness. There is actually
unnecessary to set up any pins for data path TRGMII between main SoC and
MT7530. Furthermore, it's more reasonable for the pin setup of control
path MDIO bus is being placed inside the node of ethernet controller.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18 22:41:34 +01:00
Sean Wang
8e908df628 arm: dts: mt7623: add related clock properties to cpu[1-3] nodes
Complement the missing clock properties cpu[1-3] should depend on.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18 22:39:27 +01:00
Sean Wang
cc2f65242e arm: dts: mt7623: enable three available UARTs on bananapi-r2
On bpi-r2 board, totally there're four UARTs which we usually called
uart[0-3] helpful to extend slow-I/O devices. Among those ones, uart2 has
dedicated pin slot which is used to console log. uart[0-1] appear at the
40-pins connector and uart3 has no pinout, but just has test points (TP47
for TX and TP48 for RX, respectively) nearby uart2, but we don't enable
uart3 in the patch. The missing pinctrl is also being supplemented for
those newly added devices.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18 22:39:10 +01:00
Sean Wang
528a97e9b6 arm: dts: mt7623: fix the regulators mmc should use on bananapi-r2
Both mmc devices on bananapi-r2 board should all use the fixed regulators
as their power source instead of PMIC MT6323 exports.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18 22:38:25 +01:00
Stefano Brivio
e3c72f3d37 selftests: pmtu: Drop prints to kernel log from pmtu_vti6_link_change_mtu
Reported-by: David Ahern <dsahern@gmail.com>
Fixes: 1fad59ea1c ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 17:13:29 -04:00
David S. Miller
ef57e31e2b Merge branch 'mv88e6xxx-auto-phy-intr'
Andrew Lunn says:

====================
Automatic PHY interrupts

Now that the mv88e6xxx driver either installs in interrupt handler, or
polls for interrupts, it is possible to always handle PHY interrupts,
rather than have phylib perform the polling. This speeds up detection
of link changes and reduces the load on the MDIO bus, which is
beneficial for PTP.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 16:52:59 -04:00
Andrew Lunn
6f88284f3b net: dsa: mv88e6xxx: Add MDIO interrupts for internal PHYs
When registering an MDIO bus, it is possible to pass an array of
interrupts, one per address on the bus. phylib will then associate the
interrupt to the PHY device, if no other interrupt is provided.

Some of the global2 interrupts are PHY interrupts. Place them into the
MDIO bus structure.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 16:52:59 -04:00
Andrew Lunn
bc3931557d net: dsa: mv88e6xxx: Add number of internal PHYs
Add to the info structure the number of internal PHYs, if they generate
interrupts. Some of the older generations of switches have internal
PHYs, but no interrupt registers. In this case, set the count to zero.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 16:52:58 -04:00
Andrew Lunn
adfccf1182 net: dsa: mv88e6xxx: Add missing g1 IRQ numbers
With the recent change to polling for interrupts, it is important that
the number of global 1 interrupts is listed. Without it, the driver
requests an interrupt domain for zero interrupts, which returns
EINVAL, and the probe fails.

Add two missing entries.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18 16:52:58 -04:00