Commit graph

752,318 commits

Author SHA1 Message Date
Magnus Damm
56bac953b1 ARM: dts: marzen: Add SDHI0 VCCQ Regulator
Add support for the on-board voltage regulator hooked up to GPIO3_20
on r8a7779 Marzen. The board schematics describes the regulator as U4
TPS2110A. Input wise, U4 has D0 fixed to ground, D1 tied to GPIO3_20
while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V. OUT goes to the
pull-ups for the data pins of SDHI0.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16 17:24:17 +01:00
Marek Vasut
92bcfdb334 ARM: dts: stout: Initial r8a7790 Stout board support
Stout base board support making use of 1 GiB of memory,
the Renesas H2 r8a7790 SoC with the SCIFA0 serial port
and CA15 with ARM architected timer.

Furthermore, this device tree contains entries for:
  - 4x LEDs
  - SDHI SD/MMC controller
  - Display unit with HDMI output
  - SH fast ethernet controller
  - QSPI controller with S25FL512S attached to it
  - I2C controller with DA9210 and DA 9063 PMICs

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16 17:24:16 +01:00
Geert Uytterhoeven
fe61513f16 ARM: dts: lager: Move cec_clock to root node
cec-clock is a fixed clock generator that is not controlled by i2c-12
and thus should not be a child of the i2c-12 bus node. Rather, it should
be a child of the root node of the DT.

Fixes: c5aa879776 ("ARM: dts: lager: Add CEC clock for HDMI transmitter")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16 17:24:15 +01:00
Geert Uytterhoeven
b1798f2a97 ARM: dts: kzm9d: Fix "debounce-interval" property misspelling
"debounce_interval" was never supported.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16 17:24:15 +01:00
Stephen Boyd
1871f0fcba clk: samsung: Mark a few things static
Running sparse on the samsung clk directory has some noise that we can
fix to look for future problems easier.

drivers/clk/samsung/clk-s3c2443.c:111:26: warning: symbol 's3c2443_common_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:139:26: warning: symbol 's3c2443_common_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:152:27: warning: symbol 's3c2443_common_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:186:28: warning: symbol 's3c2443_common_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:241:26: warning: symbol 's3c2416_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:247:26: warning: symbol 's3c2416_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:253:27: warning: symbol 's3c2416_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:263:28: warning: symbol 's3c2416_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:291:26: warning: symbol 's3c2443_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:296:27: warning: symbol 's3c2443_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:305:28: warning: symbol 's3c2443_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:321:26: warning: symbol 's3c2450_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:328:26: warning: symbol 's3c2450_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:334:27: warning: symbol 's3c2450_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:345:28: warning: symbol 's3c2450_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:368:33: warning: symbol 's3c2443_common_frate_clks' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2443.c:464:49: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-s3c2443.c:470:49: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-s3c2443.c:476:49: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-s3c2412.c:96:26: warning: symbol 's3c2412_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2412.c:108:35: warning: symbol 's3c2412_ffactor' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2412.c:128:26: warning: symbol 's3c2412_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2412.c:146:27: warning: symbol 's3c2412_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2412.c:177:28: warning: symbol 's3c2412_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2412.c:227:33: warning: symbol 's3c2412_common_frate_clks' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2412.c:292:43: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-s3c2410.c:98:26: warning: symbol 's3c2410_common_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:114:26: warning: symbol 's3c2410_common_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:119:27: warning: symbol 's3c2410_common_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:138:28: warning: symbol 's3c2410_common_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:203:26: warning: symbol 's3c2410_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:207:35: warning: symbol 's3c2410_ffactor' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:218:28: warning: symbol 's3c2410_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:272:26: warning: symbol 's3c244x_common_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:277:35: warning: symbol 's3c244x_common_ffactor' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:294:26: warning: symbol 's3c244x_common_dividers' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:302:27: warning: symbol 's3c244x_common_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:306:28: warning: symbol 's3c244x_common_aliases' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:321:26: warning: symbol 's3c2440_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:325:27: warning: symbol 's3c2440_gates' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:331:35: warning: symbol 's3c2442_ffactor' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:337:26: warning: symbol 's3c2442_muxes' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:346:33: warning: symbol 's3c2410_common_frate_clks' was not declared. Should it be static?
drivers/clk/samsung/clk-s3c2410.c:471:49: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-s3c2410.c:477:49: warning: Using plain integer as NULL pointer
drivers/clk/samsung/clk-s3c2410.c:483:49: warning: Using plain integer as NULL pointer

Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-16 09:23:17 -07:00
Jonas Rabenstein
5f990d3160 block: sed-opal: fix u64 short atom length
The length must be given as bytes and not as 4 bit tuples.

Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 10:15:27 -06:00
Michal Kalderon
4609adc271 qede: Fix qedr link update
Link updates were not reported to qedr correctly.
Leading to cases where a link could be down, but qedr
would see it as up.
In addition, once qede was loaded, link state would be up,
regardless of the actual link state.

Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 12:15:24 -04:00
David S. Miller
b225598d62 Merge branch 'qed-iWARP-related-fixes'
Michal Kalderon says:

====================
qed: iWARP related fixes

This series contains two fixes related to iWARP flow.
====================

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
2018-03-16 12:13:51 -04:00
Michal Kalderon
16da09047d qed: Fix non TCP packets should be dropped on iWARP ll2 connection
FW workaround. The iWARP LL2 connection did not expect TCP packets
to arrive on it's connection. The fix drops any non-tcp packets

Fixes b5c29ca ("qed: iWARP CM - setup a ll2 connection for handling
SYN packets")

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 12:13:50 -04:00
Michal Kalderon
933e8c91b9 qed: Fix MPA unalign flow in case header is split across two packets.
There is a corner case in the MPA unalign flow where a FPDU header is
split over two tcp segments. The length of the first fragment in this
case was not initialized properly and should be '1'

Fixes: c7d1d839 ("qed: Add support for MPA header being split over two tcp packets")

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 12:13:50 -04:00
Stephen Boyd
c7e4e0d7cc clk/samsung updates for v4.17
This change set includes the PLL rate definition fixes and an addition
 of compile time PLL rate validation macros. It adds definitions of some
 missing clocks and extends the PLL rate tables required in the sound
 subsystem.
 In order to handle dependencies of clocks on the power domains a clock
 provider sub-driver is added for Exynos5 SoCs. In newer Exynos SoCs
 there is no need to do such things as the clocks/power domain relations
 are more clearly defined and better documented.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJaqsD/AAoJEE1bIKeAnHqL6T4P/1yQzJjN854/fjXlUQNyWhgg
 H+0d80LqrVjPY23UN2he9HDOUBgPEPML9nlZweZ/852flfs1TkvSqAugLjuFZVyU
 7ypvqtZ7d//SLBlF4hIg9+P7S8dCn5wa2G+W348S+shH8YBiLKHUQE4Ii/gC8HOa
 LG1IMVwxdmtRiv638WbgXPM3Dp/P+Sm3mQmiycuTkwUnu3N2TvdcwEJLRwlKM8M5
 yaNTwUKEA7ipAGBsvlFXV6Q22gaDyJdRH4HFtFzTg5FnBUC4wG4Uj1mWvU8N+qgD
 lStkQrrd6YfhM79s8AOz8Tx+7lSRjsMhI+8FiCFhgb4lt3i25uudZ645ZKIDoZaa
 qta2ijFZ6y8mpIN8VLK+J3xa9YUIaYgUX/s1hcKvob1ZHBchVwkE4iu3dwaGXd30
 540dZOygX7pxUr8S1YBYJ/8If/fkHHssxuZTnT9YFhpHH9H2K1m4dJuwpDwCeekn
 1YN3205YTBoZtqoBff/C7JjtUKFtAqFXIjgX3o+0Wx/KxbM1TCXwCfT4vTadWSpA
 0G5SsP+/2JH5WsMn2r6GLOM+2b0wR0v2/IUkxeu15fp8GuIXWVfyxPmgQ1UAvuJx
 oFu4WWr/mSBJeJ8vcYbzfLkiFuqmKwLxWnueElUeh+wL2NoefpdL9uE/F0tXhzSJ
 +8qJHGhBhuvF6YAwoto/
 =mUDp
 -----END PGP SIGNATURE-----

Merge tag 'clk-v4.17-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-samsung

Pull samsung clk driver updates from Sylwester Nawrocki:

This change set includes the PLL rate definition fixes and an addition
of compile time PLL rate validation macros. It adds definitions of some
missing clocks and extends the PLL rate tables required in the sound
subsystem.

In order to handle dependencies of clocks on the power domains a clock
provider sub-driver is added for Exynos5 SoCs. In newer Exynos SoCs
there is no need to do such things as the clocks/power domain relations
are more clearly defined and better documented.

* tag 'clk-v4.17-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk: (21 commits)
  clk: samsung: Add fout=196608001 Hz EPLL rate entry for exynos4412
  clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices
  clk: samsung: exynos5420: Add more entries to EPLL rate table
  clk: samsung: exynos5420: Add CLK_SET_RATE_PARENT flag to mout_mau_epll_clk
  clk: samsung: exynos5250: Move PD-dependent clocks to Exynos5 sub-CMU
  clk: samsung: exynos5420: Move PD-dependent clocks to Exynos5 sub-CMU
  clk: samsung: Add Exynos5 sub-CMU clock driver
  soc: samsung: pm_domains: Add blacklisting clock handling
  clk: samsung: Add compile time PLL rate validators
  clk: samsung: s3c2410: Fix PLL rates
  clk: samsung: exynos7: Fix PLL rates
  clk: samsung: exynos5433: Fix PLL rates
  clk: samsung: exynos5260: Fix PLL rates
  clk: samsung: exynos5250: Fix PLL rates
  clk: samsung: exynos3250: Fix PLL rates
  clk: exynos5433: Extend list of available AUD_PLL output frequencies
  clk: exynos5433: Add CLK_IGNORE_UNUSED flag to sclk_ioclk_i2s1_bclk
  clk: samsung: Add a git tree entry to MAINTAINERS
  clk: samsung: Remove redundant dev_err call in exynos_audss_clk_probe()
  clk: samsung: Remove redundant dev_err call in exynos5433_cmu_probe()
  ...
2018-03-16 09:11:27 -07:00
Stephen Boyd
91fab9d26b clk: tegra: Updates for v4.17-rc1
This contains preliminary work for the MBIST workaround implemented in
 the Tegra PMC driver. There's also some fixes to various clocks for bugs
 that went unnoticed for a long time.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlqr0WwTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoY/aD/4ri79zTLHquirEOQXUTeh82tMFGCO8
 oD6U4TCONAIZg+Q1dcMEiV43gWy3XVKu3fNFxfb2WXajnRgTZjHyfeo7flxuA+eh
 frKRzlzY6z2AzhtodEZCMBNLoqQNnpWAUrVf5cP5Fmy4Zrt8oIWeMyQ20ftKjw5g
 XdTuOcs5H4VS1W9XyObIefovt8Sm1WPIbVeGtE4UoKoRGehFqp/NgI2vkD1gFizu
 5vDroeI6yuMlE/qCjDaYJf5G00+zW0qPSaPdnVNydxLPVBjC7h6BInVTbmikuPOP
 RgjNUUy1AFOXbrLLTQ0y17kyM2oUzdNI4oN3MjGy/Q+RDW/oZFW4XL0afNYmWoZ5
 c95e2joDEXl3Apfx9FPddbQjfcPuHRd1/NqHjMBTTljOYqn4FyG3ogEiknlU1xQY
 H5DGrGMPjfUEiZXyCT8hveeF3nFoOy1fmLazFafLtpXvLAQal7IJ7FJBQuF4W6kF
 ABaWxdU5AZlaD1eKSEsPpx+rgTqmj6szhCvU6BhFdvXaY8/VHiounjx0ggR39isG
 iE7uLkPu9zhAGAZgsDOzFneZaMt0zhYqcbsSuhaToht943pqFj1WRC7I0f7r6gWk
 wr12EK93Rq0KUZRlu0j4t2qcc0cRMhLz3/iu1Lnww2P5/B2k8IvwqQa1OdVyMR8v
 Y/juUn08IgsyBA==
 =LEk2
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.17-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-tegra

Pull tegra clk driver updates from Thierry Reding:

This contains preliminary work for the MBIST workaround implemented in
the Tegra PMC driver. There's also some fixes to various clocks for bugs
that went unnoticed for a long time.

* tag 'tegra-for-4.17-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: Fix pll_u rate configuration
  clk: tegra: Specify VDE clock rate
  clk: tegra20: Correct PLL_C_OUT1 setup
  clk: tegra: Mark HCLK, SCLK and EMC as critical
  clk: tegra: MBIST work around for Tegra210
  clk: tegra: add fence_delay for clock registers
  clk: tegra: Add la clock for Tegra210
2018-03-16 09:09:49 -07:00
Tonghao Zhang
320bd6de79 doc: Change the udp/sctp rmem/wmem default value.
The SK_MEM_QUANTUM was changed from PAGE_SIZE to 4096.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 12:03:30 -04:00
Tonghao Zhang
1e80295158 udp: Move the udp sysctl to namespace.
This patch moves the udp_rmem_min, udp_wmem_min
to namespace and init the udp_l3mdev_accept explicitly.

The udp_rmem_min/udp_wmem_min affect udp rx/tx queue,
with this patch namespaces can set them differently.

Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 12:03:30 -04:00
Arvind Yadav
fa6a91e9b9 net/iucv: Free memory obtained by kzalloc
Free memory by calling put_device(), if afiucv_iucv_init is not
successful.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:42:12 -04:00
Ard Biesheuvel
1a3713c7cd crypto: arm64/sha256-neon - play nice with CONFIG_PREEMPT kernels
Tweak the SHA256 update routines to invoke the SHA256 block transform
block by block, to avoid excessive scheduling delays caused by the
NEON algorithm running with preemption disabled.

Also, remove a stale comment which no longer applies now that kernel
mode NEON is actually disallowed in some contexts.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:58 +08:00
Ard Biesheuvel
870c163a0e crypto: arm64/aes-blk - add 4 way interleave to CBC-MAC encrypt path
CBC MAC is strictly sequential, and so the current AES code simply
processes the input one block at a time. However, we are about to add
yield support, which adds a bit of overhead, and which we prefer to
align with other modes in terms of granularity (i.e., it is better to
have all routines yield every 64 bytes and not have an exception for
CBC MAC which yields every 16 bytes)

So unroll the loop by 4. We still cannot perform the AES algorithm in
parallel, but we can at least merge the loads and stores.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:58 +08:00
Ard Biesheuvel
a8f8a69e82 crypto: arm64/aes-blk - add 4 way interleave to CBC encrypt path
CBC encryption is strictly sequential, and so the current AES code
simply processes the input one block at a time. However, we are
about to add yield support, which adds a bit of overhead, and which
we prefer to align with other modes in terms of granularity (i.e.,
it is better to have all routines yield every 64 bytes and not have
an exception for CBC encrypt which yields every 16 bytes)

So unroll the loop by 4. We still cannot perform the AES algorithm in
parallel, but we can at least merge the loads and stores.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:57 +08:00
Ard Biesheuvel
55868b45cf crypto: arm64/aes-blk - remove configurable interleave
The AES block mode implementation using Crypto Extensions or plain NEON
was written before real hardware existed, and so its interleave factor
was made build time configurable (as well as an option to instantiate
all interleaved sequences inline rather than as subroutines)

We ended up using INTERLEAVE=4 with inlining disabled for both flavors
of the core AES routines, so let's stick with that, and remove the option
to configure this at build time. This makes the code easier to modify,
which is nice now that we're adding yield support.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:55 +08:00
Ard Biesheuvel
4bf7e7a19d crypto: arm64/chacha20 - move kernel mode neon en/disable into loop
When kernel mode NEON was first introduced on arm64, the preserve and
restore of the userland NEON state was completely unoptimized, and
involved saving all registers on each call to kernel_neon_begin(),
and restoring them on each call to kernel_neon_end(). For this reason,
the NEON crypto code that was introduced at the time keeps the NEON
enabled throughout the execution of the crypto API methods, which may
include calls back into the crypto API that could result in memory
allocation or other actions that we should avoid when running with
preemption disabled.

Since then, we have optimized the kernel mode NEON handling, which now
restores lazily (upon return to userland), and so the preserve action
is only costly the first time it is called after entering the kernel.

So let's put the kernel_neon_begin() and kernel_neon_end() calls around
the actual invocations of the NEON crypto code, and run the remainder of
the code with kernel mode NEON disabled (and preemption enabled)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:55 +08:00
Ard Biesheuvel
78ad7b08d8 crypto: arm64/aes-bs - move kernel mode neon en/disable into loop
When kernel mode NEON was first introduced on arm64, the preserve and
restore of the userland NEON state was completely unoptimized, and
involved saving all registers on each call to kernel_neon_begin(),
and restoring them on each call to kernel_neon_end(). For this reason,
the NEON crypto code that was introduced at the time keeps the NEON
enabled throughout the execution of the crypto API methods, which may
include calls back into the crypto API that could result in memory
allocation or other actions that we should avoid when running with
preemption disabled.

Since then, we have optimized the kernel mode NEON handling, which now
restores lazily (upon return to userland), and so the preserve action
is only costly the first time it is called after entering the kernel.

So let's put the kernel_neon_begin() and kernel_neon_end() calls around
the actual invocations of the NEON crypto code, and run the remainder of
the code with kernel mode NEON disabled (and preemption enabled)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:55 +08:00
Ard Biesheuvel
6833817472 crypto: arm64/aes-blk - move kernel mode neon en/disable into loop
When kernel mode NEON was first introduced on arm64, the preserve and
restore of the userland NEON state was completely unoptimized, and
involved saving all registers on each call to kernel_neon_begin(),
and restoring them on each call to kernel_neon_end(). For this reason,
the NEON crypto code that was introduced at the time keeps the NEON
enabled throughout the execution of the crypto API methods, which may
include calls back into the crypto API that could result in memory
allocation or other actions that we should avoid when running with
preemption disabled.

Since then, we have optimized the kernel mode NEON handling, which now
restores lazily (upon return to userland), and so the preserve action
is only costly the first time it is called after entering the kernel.

So let's put the kernel_neon_begin() and kernel_neon_end() calls around
the actual invocations of the NEON crypto code, and run the remainder of
the code with kernel mode NEON disabled (and preemption enabled)

Note that this requires some reshuffling of the registers in the asm
code, because the XTS routines can no longer rely on the registers to
retain their contents between invocations.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:54 +08:00
Ard Biesheuvel
bd2ad885e3 crypto: arm64/aes-ce-ccm - move kernel mode neon en/disable into loop
When kernel mode NEON was first introduced on arm64, the preserve and
restore of the userland NEON state was completely unoptimized, and
involved saving all registers on each call to kernel_neon_begin(),
and restoring them on each call to kernel_neon_end(). For this reason,
the NEON crypto code that was introduced at the time keeps the NEON
enabled throughout the execution of the crypto API methods, which may
include calls back into the crypto API that could result in memory
allocation or other actions that we should avoid when running with
preemption disabled.

Since then, we have optimized the kernel mode NEON handling, which now
restores lazily (upon return to userland), and so the preserve action
is only costly the first time it is called after entering the kernel.

So let's put the kernel_neon_begin() and kernel_neon_end() calls around
the actual invocations of the NEON crypto code, and run the remainder of
the code with kernel mode NEON disabled (and preemption enabled)

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:54 +08:00
Ard Biesheuvel
702202f1d4 crypto: testmgr - add a new test case for CRC-T10DIF
In order to be able to test yield support under preempt, add a test
vector for CRC-T10DIF that is long enough to take multiple iterations
(and thus possible preemption between them) of the primary loop of the
accelerated x86 and arm64 implementations.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:53 +08:00
Kees Cook
14de52112e crypto: ecc - Remove stack VLA usage
On the quest to remove all VLAs from the kernel[1], this switches to
a pair of kmalloc regions instead of using the stack. This also moves
the get_random_bytes() after all allocations (and drops the needless
"nbytes" variable).

[1] https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:53 +08:00
Gary R Hook
b698a9f4c5 crypto: ccp - Validate buffer lengths for copy operations
The CCP driver copies data between scatter/gather lists and DMA buffers.
The length of the requested copy operation must be checked against
the available destination buffer length.

Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:52 +08:00
Kamil Konieczny
3d053d53fc crypto: hash - Prevent use of req->result in ahash update
Prevent improper use of req->result field in ahash update, init, export and
import functions in drivers code. A driver should use ahash request context
if it needs to save internal state.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:52 +08:00
Peter Wu
5bfa7ac388 crypto: virtio - remove dependency on CRYPTO_AUTHENC
virtio_crypto does not use function crypto_authenc_extractkeys, remove
this unnecessary dependency. Compiles fine and passes cryptodev-linux
cipher and speed tests from https://wiki.qemu.org/Features/VirtioCrypto

Fixes: dbaf0624ff ("crypto: add virtio-crypto driver")
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:51 +08:00
Gilad Ben-Yossef
cd83a8a7c3 crypto: testmgr - introduce SM4 tests
Add testmgr tests for the newly introduced SM4 ECB symmetric cipher.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:50 +08:00
Gilad Ben-Yossef
747c8ce4e7 crypto: sm4 - introduce SM4 symmetric cipher algorithm
Introduce the SM4 cipher algorithms (OSCCA GB/T 32907-2016).

SM4 (GBT.32907-2016) is a cryptographic standard issued by the
Organization of State Commercial Administration of China (OSCCA)
as an authorized cryptographic algorithms for the use within China.

SMS4 was originally created for use in protecting wireless
networks, and is mandated in the Chinese National Standard for
Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure)
(GB.15629.11-2003).

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:48 +08:00
Harsh Jain
5110e65536 crypto: chelsio -Split Hash requests for large scatter gather list
Send multiple WRs to H/W when No. of entries received in scatter list
cannot be sent in single request.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:47 +08:00
Harsh Jain
7ffb911882 crypto: chelsio - Fix iv passed in fallback path for rfc3686
We use ctr(aes) to fallback rfc3686(ctr) request. Send updated IV to fallback path.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:46 +08:00
Harsh Jain
5fb78dba16 crypto: chelsio - Update IV before sending request to HW
CBC Decryption requires Last Block as IV. In case src/dst buffer
are same last block will be replaced by plain text. This patch copies
the Last Block before sending request to HW.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:46 +08:00
Harsh Jain
1d693cf650 crypto: chelsio - Fix src buffer dma length
ulptx header cannot have length > 64k. Adjust length accordingly.

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:45 +08:00
Harsh Jain
125d01caae crypto: chelsio - Use kernel round function to align lengths
Replace DIV_ROUND_UP to roundup or rounddown

Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:45 +08:00
Vladimir Zapolskiy
a6ab6402c4 hwrng: mxc-rnga - add driver support on boards with device tree
The driver works well on i.MX31 powered boards with device description
taken from board device tree, the only change to add to the driver is
the missing OF device id, the affected list of included headers and
indentation in platform driver struct are beautified a little.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:44 +08:00
Vladimir Zapolskiy
9885b1bd95 dt-bindings: rng: Document Freescale i.MX21 and i.MX31 RNGA compatibles
Freescale i.MX21 and i.MX31 SoCs contain a Random Number Generator
Accelerator module (RNGA), which is replaced by RNGB and RNGC modules
on later i.MX SoC series, the change adds a new compatible property
to describe the controller.

Since all versions of Freescale RNG modules are legacy, apparently
the documentation file has no more potential for further extensions,
nevertheless generalize it by removing explicit RNGC specifics.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:42 +08:00
Eric Biggers
91a2abb78f crypto: arm64/speck - add NEON-accelerated implementation of Speck-XTS
Add a NEON-accelerated implementation of Speck128-XTS and Speck64-XTS
for ARM64.  This is ported from the 32-bit version.  It may be useful on
devices with 64-bit ARM CPUs that don't have the Cryptography
Extensions, so cannot do AES efficiently -- e.g. the Cortex-A53
processor on the Raspberry Pi 3.

It generally works the same way as the 32-bit version, but there are
some slight differences due to the different instructions, registers,
and syntax available in ARM64 vs. in ARM32.  For example, in the 64-bit
version there are enough registers to hold the XTS tweaks for each
128-byte chunk, so they don't need to be saved on the stack.

Benchmarks on a Raspberry Pi 3 running a 64-bit kernel:

   Algorithm                              Encryption     Decryption
   ---------                              ----------     ----------
   Speck64/128-XTS (NEON)                 92.2 MB/s      92.2 MB/s
   Speck128/256-XTS (NEON)                75.0 MB/s      75.0 MB/s
   Speck128/256-XTS (generic)             47.4 MB/s      35.6 MB/s
   AES-128-XTS (NEON bit-sliced)          33.4 MB/s      29.6 MB/s
   AES-256-XTS (NEON bit-sliced)          24.6 MB/s      21.7 MB/s

The code performs well on higher-end ARM64 processors as well, though
such processors tend to have the Crypto Extensions which make AES
preferred.  For example, here are the same benchmarks run on a HiKey960
(with CPU affinity set for the A73 cores), with the Crypto Extensions
implementation of AES-256-XTS added:

   Algorithm                              Encryption     Decryption
   ---------                              -----------    -----------
   AES-256-XTS (Crypto Extensions)        1273.3 MB/s    1274.7 MB/s
   Speck64/128-XTS (NEON)                  359.8 MB/s     348.0 MB/s
   Speck128/256-XTS (NEON)                 292.5 MB/s     286.1 MB/s
   Speck128/256-XTS (generic)              186.3 MB/s     181.8 MB/s
   AES-128-XTS (NEON bit-sliced)           142.0 MB/s     124.3 MB/s
   AES-256-XTS (NEON bit-sliced)           104.7 MB/s      91.1 MB/s

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:41 +08:00
Markus Elfring
6c51ddddac crypto: ccp - Use memdup_user() rather than duplicating its implementation
Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:33:29 +08:00
David S. Miller
859844e5c2 Merge branch 'net-ipv6-Address-checks-need-to-consider-the-L3-domain'
David Ahern says:

====================
net/ipv6: Address checks need to consider the L3 domain

IPv6 prohibits a local address from being used as a gateway for a route.
However, it is ok for the gateway to be a local address in a different L3
domain (e.g., VRF). This allows, for example, veth pairs to connect VRFs.

ip6_route_info_create calls ipv6_chk_addr_and_flags for gateway addresses
to determine if the address is a local one, but ipv6_chk_addr_and_flags
does not currently consider L3 domains. As a result routes can not be
added in one VRF with a nexthop that points to a local address in a
second VRF.

Resolve by comparing the l3mdev for the passed in device and requiring an
l3mdev match with the device containing an address. The intent of checking
for an address on the specified device versus any device in the domain is
mantained by a new argument to skip the check between the passed in device
and the device with the address.

Patch 1 moves the gateway validation from ip6_route_info_create into a
helper; the function is long enough and refactoring drops the indent
level.

Patch 2 adds a skip_dev_check argument to ipv6_chk_addr_and_flags to
allow a device to always be passed yet skip the device check when
looking at addresses and fixes up a few ipv6_chk_addr callers that
pass a NULL device.

Patch 3 adds l3mdev checks to ipv6_chk_addr_and_flags.

Patches 4 and 5 do some refactoring to the fib_tests script and then
patch 6 adds nexthop validation tests.

v4
- separated l3mdev check into a separate patch (patch 3 of this set)
  as suggested by Kirill
- consolidated dev and ipv6_chk_addr_and_flags call into 1 if (Kirill)
- added a temp variable for gw type (Kirill)

v3
- set skip_dev_check in ipv6_chk_addr based on dev == NULL (per
  comment from Ido)

v2
- handle 2 variations of route spec with sane error path
- add test cases
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:28:40 -04:00
David Ahern
654d3a7821 selftests: fib_tests: Add IPv6 nexthop spec tests
Add series of tests for valid and invalid nexthop specs for IPv6.

$ TEST=fib_nexthop_test ./fib_tests.sh
...
IPv6 nexthop tests
    TEST: Directly connected nexthop, unicast address              [ OK ]
    TEST: Directly connected nexthop, unicast address with device  [ OK ]
    TEST: Gateway is linklocal address                             [ OK ]
    TEST: Gateway is linklocal address, no device                  [ OK ]
    TEST: Gateway can not be local unicast address                 [ OK ]
    TEST: Gateway can not be local unicast address, with device    [ OK ]
    TEST: Gateway can not be a local linklocal address             [ OK ]
    TEST: Gateway can be local address in a VRF                    [ OK ]
    TEST: Gateway can be local address in a VRF, with device       [ OK ]
    TEST: Gateway can be local linklocal address in a VRF          [ OK ]
    TEST: Redirect to VRF lookup                                   [ OK ]
    TEST: VRF route, gateway can be local address in default VRF   [ OK ]
    TEST: VRF route, gateway can not be a local address            [ OK ]
    TEST: VRF route, gateway can not be a local addr with device   [ OK ]

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:28:39 -04:00
David Ahern
a511858c75 selftests: fib_tests: Allow user to run a specific test
Allow a user to run just a specific fib test by setting the TEST
environment variable.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:28:39 -04:00
David Ahern
171a48717b selftests: fib_tests: Use an alias for ip command
Replace 'ip -netns testns' with the alias IP. Shortens the line lengths
and makes running the commands manually a bit easier.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:28:39 -04:00
David Ahern
1893ff2027 net/ipv6: Add l3mdev check to ipv6_chk_addr_and_flags
Lookup the L3 master device for the passed in device. Only consider
addresses on netdev's with the same master device. If the device is
not enslaved or is NULL, then the l3mdev is NULL which means only
devices not enslaved (ie, in the default domain) are considered.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:28:38 -04:00
David Ahern
232378e8db net/ipv6: Change address check to always take a device argument
ipv6_chk_addr_and_flags determines if an address is a local address and
optionally if it is an address on a specific device. For example, it is
called by ip6_route_info_create to determine if a given gateway address
is a local address. The address check currently does not consider L3
domains and as a result does not allow a route to be added in one VRF
if the nexthop points to an address in a second VRF. e.g.,

    $ ip route add 2001:db8:1::/64 vrf r2 via 2001:db8:102::23
    Error: Invalid gateway address.

where 2001:db8:102::23 is an address on an interface in vrf r1.

ipv6_chk_addr_and_flags needs to allow callers to always pass in a device
with a separate argument to not limit the address to the specific device.
The device is used used to determine the L3 domain of interest.

To that end add an argument to skip the device check and update callers
to always pass a device where possible and use the new argument to mean
any address in the domain.

Update a handful of users of ipv6_chk_addr with a NULL dev argument. This
patch handles the change to these callers without adding the domain check.

ip6_validate_gw needs to handle 2 cases - one where the device is given
as part of the nexthop spec and the other where the device is resolved.
There is at least 1 VRF case where deferring the check to only after
the route lookup has resolved the device fails with an unintuitive error
"RTNETLINK answers: No route to host" as opposed to the preferred
"Error: Gateway can not be a local address." The 'no route to host'
error is because of the fallback to a full lookup. The check is done
twice to avoid this error.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:28:38 -04:00
David Ahern
9fbb704c33 net/ipv6: Refactor gateway validation on route add
Move gateway validation code from ip6_route_info_create into
ip6_validate_gw. Code move plus adjustments to handle the potential
reset of dev and idev and to make checkpatch happy.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:28:38 -04:00
Florian Fainelli
484d802d0f net: systemport: Rewrite __bcm_sysport_tx_reclaim()
There is no need for complex checking between the last consumed index
and current consumed index, a simple subtraction will do.

This also eliminates the possibility of a permanent transmit queue stall
under the following conditions:

- one CPU bursts ring->size worth of traffic (up to 256 buffers), to the
  point where we run out of free descriptors, so we stop the transmit
  queue at the end of bcm_sysport_xmit()

- because of our locking, we have the transmit process disable
  interrupts which means we can be blocking the TX reclamation process

- when TX reclamation finally runs, we will be computing the difference
  between ring->c_index (last consumed index by SW) and what the HW
  reports through its register

- this register is masked with (ring->size - 1) = 0xff, which will lead
  to stripping the upper bits of the index (register is 16-bits wide)

- we will be computing last_tx_cn as 0, which means there is no work to
  be done, and we never wake-up the transmit queue, leaving it
  permanently disabled

A practical example is e.g: ring->c_index aka last_c_index = 12, we
pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12,
so last_tx_cn == 0, nothing happens.

Fixes: 80105befdb ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:16:55 -04:00
David S. Miller
1ad2ff028f Merge branch 'macb-Introduce-phy-handle-DT-functionality'
Brad Mouring says:

====================
net: macb: Introduce phy-handle DT functionality

Consider the situation where a macb netdev is connected through
a phydev that sits on a mii bus other than the one provided to
this particular netdev. This situation is what this patchset aims
to accomplish through the existing phy-handle optional binding.

This optional binding (as described in the ethernet DT bindings doc)
directs the netdev to the phydev to use. This is precisely the
situation this patchset aims to solve, so it makes sense to introduce
the functionality to this driver (where the physical layout discussed
was encountered).

The devicetree snippet would look something like this:

...
   ethernet@feedf00d {
           ...
           phy-handle = <&phy0> // the first netdev is physically wired to phy0
           ...
           phy0: phy@0 {
                   ...
                   reg = <0x0> // MDIO address 0
                   ...
           }
           phy1: phy@1 {
                   ...
                   reg = <0x1> // MDIO address 1
                   ...
           }
           ...
   }

   ethernet@deadbeef {
           ...
           phy-handle = <&phy1> // tells the driver to use phy1 on the
                                // first mac's mdio bus (it's wired thusly)
           ...
   }
...

The work done to add the phy_node in the first place (dacdbb4dfc:
"net: macb: add fixed-link node support") will consume the
device_node (if found).

v2: Reorganization of mii probe/init functions, suggested by Andrew Lunn
v3: Moved some of the bus init code back into init (erroneously moved to probe)
    some style issues, and an unintialized variable warning addressed.
v4: Add Reviewed-by: tags
    Skip fallback code if phy-handle phandle is found
v5: Cleanup formatting issues
    Fix compile failure introduced in 1/4 "net: macb: Reorganize macb_mii
        bringup"
    Fix typo in "Documentation: macb: Document phy-handle binding"
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:14:34 -04:00
Brad Mouring
f3b249e652 Documentation: macb: Document phy-handle binding
Document the existence of the optional binding, directing to the
general ethernet document that describes this binding.

Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:14:33 -04:00
Brad Mouring
2105a5d3ac net: macb: Add phy-handle DT support
This optional binding (as described in the ethernet DT bindings doc)
directs the netdev to the phydev to use. This is useful for a phy
chip that has >1 phy in it, and two netdevs are using the same phy
chip (i.e. the second mac's phy lives on the first mac's MDIO bus)

The devicetree snippet would look something like this:

ethernet@feedf00d {
	...
	phy-handle = <&phy0> // the first netdev is physically wired to phy0
	...
	phy0: phy@0 {
		...
		reg = <0x0> // MDIO address 0
		...
	}
	phy1: phy@1 {
		...
		reg = <0x1> // MDIO address 1
		...
	}
...
}

ethernet@deadbeef {
	...
	phy-handle = <&phy1> // tells the driver to use phy1 on the
						 // first mac's mdio bus (it's wired thusly)
	...
}

The work done to add the phy_node in the first place (dacdbb4dfc:
"net: macb: add fixed-link node support") will consume the
device_node (if found).

Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16 11:14:33 -04:00