Commit graph

752,318 commits

Author SHA1 Message Date
David S. Miller
cfda06d736 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-03-08

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix various BPF helpers which adjust the skb and its GSO information
   with regards to SCTP GSO. The latter is a special case where gso_size
   is of value GSO_BY_FRAGS, so mangling that will end up corrupting
   the skb, thus bail out when seeing SCTP GSO packets, from Daniel(s).

2) Fix a compilation error in bpftool where BPF_FS_MAGIC is not defined
   due to too old kernel headers in the system, from Jiri.

3) Increase the number of x64 JIT passes in order to allow larger images
   to converge instead of punting them to interpreter or having them
   rejected when the interpreter is not built into the kernel, from Daniel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07 20:27:51 -05:00
Neil Armstrong
6878231f25 meson-gx-socinfo: Add package id for S905H
The S905H can be found on the Wetek Hub and Play2 boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07 17:26:13 -08:00
Neil Armstrong
fb72c03e0e ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2
This patch adds a specific wetek dtsi to handle the specific Hub and Play2
boards by no more depending on the p20x dtsi.
This simplifies the hub and play2 dts and will avoid breaking these
boards when adding p200 and p201 specific changes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07 17:25:56 -08:00
Jerome Brunet
c04ffa71ff ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate
Different modules maybe installed by the user on the eMMC connector
of the odroid-c2. While the red modules are working without an issue,
it seems some black modules (apparently Samsung based) are having
issue at 200MHz

While the tuning algorithm introduced in v4.14 enables high speed modes
on every other tested designs, it seems a problem remains for this
particular combination of board and eMMC module.

Lowering the maximum frequency of the eMMC on this board until we can
figure out a better solution.

Fixes: d341ca88ee ("mmc: meson-gx: rework tuning function")
Suggested-by: Ellie Reeves <ellierevves@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07 17:24:10 -08:00
Daniel Borkmann
12ef9bda06 Merge branch 'bpf-perf-sample-addr'
Teng Qin says:

====================
These patches add support that allows bpf programs attached to perf events to
read the address values recorded with the perf events. These values are
requested by specifying sample_type with PERF_SAMPLE_ADDR when calling
perf_event_open().

The main motivation for these changes is to support building memory or lock
access profiling and tracing tools. For example on Intel CPUs, the recorded
address values for supported memory or lock access perf events would be
the access or lock target addresses from PEBS buffer. Such information would
be very valuable for building tools that help understand memory access or
lock acquire pattern.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-08 02:22:35 +01:00
Teng Qin
12fe12253c samples/bpf: add example to test reading address
This commit adds additional test in the trace_event example, by
attaching the bpf program to MEM_UOPS_RETIRED.LOCK_LOADS event with
PERF_SAMPLE_ADDR requested, and print the lock address value read from
the bpf program to trace_pipe.

Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-08 02:22:34 +01:00
Teng Qin
95da0cdb72 bpf: add support to read sample address in bpf program
This commit adds new field "addr" to bpf_perf_event_data which could be
read and used by bpf programs attached to perf events. The value of the
field is copied from bpf_perf_event_data_kern.addr and contains the
address value recorded by specifying sample_type with PERF_SAMPLE_ADDR
when calling perf_event_open.

Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-08 02:22:34 +01:00
Neil Armstrong
114abfe1aa ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
Move the SPDX-License-Identifier lines to the top and drop the
license splat.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07 17:21:58 -08:00
Martin Blumenstingl
7a6cc8be39 ARM: dts: meson8b: add the I2C clocks
Add the I2C clocks so the I2C busses can be used. The clock input is not
device specific (the AO I2C bus uses clk81 as input, while the two I2C
busses in CBUS have a separate "CLKID_I2C" gate, provided by the clock
controller.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07 17:14:04 -08:00
Jerome Brunet
b4ff05ca9a ARM64: dts: meson-axg: fix pwm_AO_cd compatible
The compatible in pwm_AO_cd is wrong and does not match anything.
Correct this with the correct compatible string

Fixes: 4a81e5ddfb ("ARM64: dts: meson-axg: add PWM DT info for Meson-Axg SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07 17:10:08 -08:00
Jerome Brunet
a04c18cb27 ARM64: dts: meson-axg: add sec_AO system controller
add the secure AO system controller with chipid enabled

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-03-07 17:09:17 -08:00
Leon Romanovsky
31135eb388 net/mlx5: Fix wrongly assigned CQ reference counter
The kernel compiled with CONFIG_REFCOUNT_FULL produces the following
error. The reason to it that initial value of refcount_t is supposed
to be more than 0, change it.

[    3.106634] ------------[ cut here ]------------
[    3.107756] refcount_t: increment on 0; use-after-free.
[    3.109130] WARNING: CPU: 0 PID: 1 at lib/refcount.c:153 refcount_inc+0x27/0x30
[    3.110085] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00028-gf683e04bdccc #137
[    3.110085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[    3.110085] RIP: 0010:refcount_inc+0x27/0x30
[    3.110085] RSP: 0000:ffffaa620000fba0 EFLAGS: 00010286
[    3.110085] RAX: 0000000000000000 RBX: ffff9a6d1a1821c8 RCX: ffffffff98a50f48
[    3.110085] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000246
[    3.110085] RBP: ffff9a6d1ac800a0 R08: 0000000000000289 R09: 000000000000000a
[    3.110085] R10: fffff03bc0682840 R11: ffffffff9949856d R12: ffff9a6d1b4a4000
[    3.110085] R13: 0000000000000000 R14: ffff9a6d1a0a6c00 R15: ffffaa620000fc5c
[    3.110085] FS:  0000000000000000(0000) GS:ffff9a6d1fc00000(0000) knlGS:0000000000000000
[    3.110085] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.110085] CR2: 0000000000000000 CR3: 000000000ba0a000 CR4: 00000000000006b0
[    3.110085] Call Trace:
[    3.110085]  mlx5_core_create_cq+0xde/0x250
[    3.110085]  ? __kmalloc+0x1ce/0x1e0
[    3.110085]  mlx5e_create_cq+0x15c/0x1e0
[    3.110085]  mlx5e_open_drop_rq+0xea/0x190
[    3.110085]  mlx5e_attach_netdev+0x53/0x140
[    3.110085]  mlx5e_attach+0x3d/0x60
[    3.110085]  mlx5e_add+0x11d/0x2f0
[    3.110085]  mlx5_add_device+0x77/0x170
[    3.110085]  mlx5_register_interface+0x74/0xc0
[    3.110085]  ? set_debug_rodata+0x11/0x11
[    3.110085]  init+0x67/0x72
[    3.110085]  ? mlx4_en_init_ptys2ethtool_map+0x346/0x346
[    3.110085]  do_one_initcall+0x98/0x147
[    3.110085]  ? set_debug_rodata+0x11/0x11
[    3.110085]  kernel_init_freeable+0x164/0x1e0
[    3.110085]  ? rest_init+0xb0/0xb0
[    3.110085]  kernel_init+0xa/0x100
[    3.110085]  ret_from_fork+0x35/0x40
[    3.110085] Code: 00 00 00 00 e8 ab ff ff ff 84 c0 74 02 f3 c3 80 3d 3b c3 64 01 00 75 f5 48 c7 c7 68 0b 81 98 c6 05 2b c3 64 01 01 e8 79 d7 a3 ff <0f> ff c3 66 0f 1f 44 00 00 8b 06 83 f8 ff 74 39 31 c9 39 f8 89
[    3.110085] ---[ end trace a0068e1c68438a74 ]---

Fixes: f105b45bf7 ("net/mlx5: CQ hold/put API")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:54:36 -08:00
Aviad Yehezkel
cb01008390 net/mlx5: IPSec, Add support for ESN
Currently ESN is not supported with IPSec device offload.

This patch adds ESN support to IPsec device offload.
Implementing new xfrm device operation to synchronize offloading device
ESN with xfrm received SN. New QP command to update SA state at the
following:

           ESN 1                    ESN 2                  ESN 3
|-----------*-----------|-----------*-----------|-----------*
^           ^           ^           ^           ^           ^

^ - marks where QP command invoked to update the SA ESN state
    machine.
| - marks the start of the ESN scope (0-2^32-1). At this point move SA
    ESN overlap bit to zero and increment ESN.
* - marks the middle of the ESN scope (2^31). At this point move SA
    ESN overlap bit to one.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:54:36 -08:00
Aviad Yehezkel
75ef3f5515 net/mlx5e: Added common function for to_ipsec_sa_entry
New function for getting driver internal sa entry from xfrm state.
All checks are done in one function.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:54:35 -08:00
Aviad Yehezkel
05564d0ae0 net/mlx5: Add flow-steering commands for FPGA IPSec implementation
In order to add a context to the FPGA, we need to get both the software
transform context (which includes the keys, etc) and the
source/destination IPs (which are included in the steering
rule). Therefore, we register new set of firmware like commands for
the FPGA. Each time a rule is added, the steering core infrastructure
calls the FPGA command layer. If the rule is intended for the FPGA,
it combines the IPs information with the software transformation
context and creates the respective hardware transform.
Afterwards, it calls the standard steering command layer.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:54:35 -08:00
Aviad Yehezkel
d6c4f0298c net/mlx5: Refactor accel IPSec code
The current code has one layer that executed FPGA commands and
the Ethernet part directly used this code. Since downstream patches
introduces support for IPSec in mlx5_ib, we need to provide some
abstractions. This patch refactors the accel code into one layer
that creates a software IPSec transformation and another one which
creates the actual hardware context.
The internal command implementation is now hidden in the FPGA
core layer. The code also adds the ability to share FPGA hardware
contexts. If two contexts are the same, only a reference count
is taken.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:54:34 -08:00
Aviad Yehezkel
af9fe19d66 net/mlx5: Added required metadata capability for ipsec
Currently our device requires additional metadata in packet
to perform ipsec crypto offload.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:54:34 -08:00
Rodrigo Vivi
a4713c5a8d drm/i915/cnl: Add Wa_2201832410
"Clock gating bug in GWL may not clear barrier state when an EOT
is received, causing a hang the next time that barrier is used."

HSDES: 2201832410

Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307220912.3681-1-rodrigo.vivi@intel.com
2018-03-07 15:54:31 -08:00
Aviad Yehezkel
1d2005e204 net/mlx5: Export ipsec capabilities
We will need that for ipsec verbs.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:54:30 -08:00
Aviad Yehezkel
65802f4800 net/mlx5: IPSec, Add command V2 support
This patch adds V2 command support.
New fpga devices support extended features (udp encap, esn etc...), this
features require new hardware sadb format therefore we have a new version
of commands to manipulate it.

Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:53:18 -08:00
Yossi Kuperman
788a821076 net/mlx5e: IPSec, Add support for ESP trailer removal by hardware
Current hardware decrypts and authenticates incoming ESP packets.
Subsequently, the software extracts the nexthdr field, truncates the
trailer and adjusts csum accordingly.

With this patch and a capable device, the trailer is being removed
by the hardware and the nexthdr field is conveyed via PET. This way
we avoid both the need to access the trailer (cache miss) and to
compute its relative checksum, which significantly improve
the performance.

Experiment shows that trailer removal improves the performance by
2Gbps, (netperf). Both forwarding and host-to-host configurations.

Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:53:18 -08:00
Yossi Kuperman
581fdddee4 net/mlx5: IPSec, Generalize sandbox QP commands
The current code assume only SA QP commands.
Refactor in order to pave the way for new QP commands:
1. Generic cmd response format.
2. SA cmd checks are in dedicated functions.
3. Aligned debug prints.

Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-07 15:53:17 -08:00
Arkadiusz Hiler
5444a992b4 Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
This reverts commit 4828296982 which
caused the following issues:

1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working
after suspend-resume cycle. Due to strange state of the device another
suspend is impossible.

The following dmesg errors can be observed:
thinkpad_acpi: EC reports that Thermal Table has changed
rmi4_smbus 7-002c: failed to get SMBus version number!
rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16.
rmi4_f01 rmi4-00.fn01: Resume failed with code -16.
rmi4_physical rmi4-00: Failed to suspend functions: -16
rmi4_smbus 7-002c: Failed to resume device: -16
PM: resume devices took 0.640 seconds
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16).
rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
psmouse: probe of serio3 failed with error -1

2. On another T460p with BIOS version 2.15 two finger scrolling gesture
on the touchpad stops working after suspend-resume cycle (about 75%
reproducibility, when it still works, the scrolling gesture becomes
laggy). Nothing suspicious appears in the dmesg.

Analysis form Richard Schütz:

"RMI is unreliable on the ThinkPad T460p because the device is affected
by the firmware behavior addressed in a7ae81952c ("i2c: i801: Allow
ACPI SystemIO OpRegion to conflict with PCI BAR")."

The affected devices often show:

i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited

Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Tested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-07 15:50:29 -08:00
Saeed Mahameed
d83a69c2b1 net/mlx5: Use MLX5_IPSEC_DEV macro for ipsec caps
Fix build break of mlx5_accel_ipsec_device_caps is not defined when
MLX5_ACCEL is not selected, use MLX5_IPSEC_DEV instead which handles
such case.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reported-by: Doug Ledford <dledford@redhat.com>
2018-03-07 15:49:19 -08:00
Eric Dumazet
a366e300ae ip6mr: remove synchronize_rcu() in favor of SOCK_RCU_FREE
Kirill found that recently added synchronize_rcu() call in
ip6mr_sk_done()
was slowing down netns dismantle and posted a patch to use it only if
the socket
was found.

I instead suggested to get rid of this call, and use instead
SOCK_RCU_FREE

We might later change IPv4 side to use the same technique and unify
both stacks. IPv4 does not use synchronize_rcu() but has a call_rcu()
that could be replaced by SOCK_RCU_FREE.

Tested:
 time for i in {1..1000}; do unshare -n /bin/false;done

 Before : real 7m18.911s
 After : real 10.187s

Fixes: 8571ab479a ("ip6mr: Make mroute_sk rcu-based")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07 18:13:41 -05:00
Yishai Hadas
d50a8a96ee IB/mlx4: Move mlx4_uverbs_ex_query_device_resp to include/uapi/
This struct is involved in the user API for mlx4 and should not be hidden
inside a driver header file.

Fixes: 09d208b258 ("IB/mlx4: Add report for RSS capabilities by vendor channel")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-07 16:10:07 -07:00
David S. Miller
3f6be0ebde Merge branch 'RDS-zerocopy-code-enhancements'
Sowmini Varadhan says:

====================
RDS: zerocopy code enhancements

A couple of enhancements to the rds zerocop code
- patch 1 refactors rds_message_copy_from_user to pull the zcopy logic
  into its own function
- patch 2 drops the usage sk_buff to track MSG_ZEROCOPY cookies and
  uses a simple linked list (enhancement suggested by willemb during
  code review)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07 18:05:57 -05:00
Sowmini Varadhan
9426bbc6de rds: use list structure to track information for zerocopy completion notification
Commit 401910db4c ("rds: deliver zerocopy completion notification
with data") removes support fo r zerocopy completion notification
on the sk_error_queue, thus we no longer need to track the cookie
information in sk_buff structures.

This commit removes the struct sk_buff_head rs_zcookie_queue by
a simpler list that results in a smaller memory footprint as well
as more efficient memory_allocation time.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07 18:05:57 -05:00
Sowmini Varadhan
d40a126b16 rds: refactor zcopy code into rds_message_zcopy_from_user
Move the large block of code predicated on zcopy from
rds_message_copy_from_user into a new function,
rds_message_zcopy_from_user()

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-07 18:05:57 -05:00
Doug Ledford
1abb791fcd Merge tag 'mlx5-updates-2018-02-28-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next
mlx5-updates-2018-02-28-1 (IPSec-1)

This series consists of some fixes and refactors for the mlx5 drivers,
especially around the FPGA and flow steering. Most of them are trivial
fixes and are the foundation of allowing IPSec acceleration from user-space.

We use flow steering abstraction in order to accelerate IPSec packets.
When a user creates a steering rule, [s]he states that we'll carry an
encrypt/decrypt flow action (using a specific configuration) for every
packet which conforms to a certain match. Since currently offloading these
packets is done via FPGA, we'll add another set of flow steering ops.
These ops will execute the required FPGA commands and then call the
standard steering ops.

In order to achieve this, we need that the commands will get all the
required information. Therefore, we pass the fte object and embed the
flow_action struct inside the fte. In addition, we add the shim layer
that will later be used for alternating between the standard and the
FPGA steering commands.

Some fixes, like " net/mlx5e: Wait for FPGA command responses with a timeout"
are very relevant for user-space applications, as these applications could
be killed, but we still want to wait for the FPGA and update the kernel's
database.

Regards,
Aviad and Matan

Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07 15:56:39 -07:00
Zhu Yanjun
befd8d98f2 IB/rxe: change the function rxe_init_device_param type
The function rxe_init_device_param always return 0. So the function
type is changed to void.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07 15:56:15 -07:00
Zhu Yanjun
31f1bd14cb IB/rxe: remove unnecessary rxe in rxe_send
In the function rxe_send, the variable rxe is not used in it.
So it should be removed.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07 15:56:14 -07:00
Zhu Yanjun
86af617641 IB/rxe: remove unnecessary skb_clone
In send_atomic_ack function, it is not necessary to make a
skb_clone. To gain better performance (high throughput and
low latency), this skb_clone is removed.

The following tests are made.

 server                       client
---------                    ---------
|1.1.1.1|<----rxe-channel--->|1.1.1.2|
---------                    ---------

On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512

The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server
and client.

This test runs for several hours. There is no memory leak and the whole
system can work well.

Based on the above network, the following tests are made.

Server: ibv_rc_pingpong -d rxe0 -g 1
Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1

The test results on Server(10 tests are made).
Before:
Throughput is 137.07 Mbit/sec
Latency is 517.76 usec/iter

After:
Throughput is 148.85 Mbit/sec
Latency is 476.64 usec/iter

The throughput is enhanced and the latency is reduced.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>

Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07 15:56:14 -07:00
Bart Van Assche
63cf1a902c IB/srpt: Add RDMA/CM support
Add a parameter for configuring the port on which the ib_srpt driver
listens for incoming RDMA/CM connections, namely
/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port. The default
value for this parameter is 0 which means "do not listen for incoming
RDMA/CM connections". Add RDMA/CM support to all code that handles
connection state changes. Modify srpt_init_nodeacl() such that ACLs can
be configured for IPv4 and IPv6 addresses.

Note: incoming connection requests are only accepted for ports that
have been enabled. See also the "if (!sport->enabled)" code in the
connection request handler. See also the following configfs attribute:
/sys/kernel/config/target/srpt/$port/$port/enable.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07 15:56:14 -07:00
Daniel Borkmann
6007b080d2 bpf, x64: increase number of passes
In Cilium some of the main programs we run today are hitting 9 passes
on x64's JIT compiler, and we've had cases already where we surpassed
the limit where the JIT then punts the program to the interpreter
instead, leading to insertion failures due to CONFIG_BPF_JIT_ALWAYS_ON
or insertion failures due to the prog array owner being JITed but the
program to insert not (both must have the same JITed/non-JITed property).

One concrete case the program image shrunk from 12,767 bytes down to
10,288 bytes where the image converged after 16 steps. I've measured
that this took 340us in the JIT until it converges on my i7-6600U. Thus,
increase the original limit we had from day one where the JIT covered
cBPF only back then before we run into the case (as similar with the
complexity limit) where we trip over this and hit program rejections.
Also add a cond_resched() into the compilation loop, the JIT process
runs without any locks and may sleep anyway.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-07 14:47:24 -08:00
Linus Walleij
df99dd9202 drm/pl111: Use max memory bandwidth for resolution
We were previously selecting 1024x768 and 32BPP as the default
set-up for the PL111 consumers.

This does not work on elder systems: the device tree bindings
support a property "max-memory-bandwidth" in bytes/second that
states that if you exceed this the memory bus will saturate.
The result is flickering and unstable images.

Parse the "max-memory-bandwidth" and respect it when
intializing the driver. On the RealView PB11MP, Versatile and
Integrator/CP we get a nice console as default with this code.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307215819.15814-1-linus.walleij@linaro.org
2018-03-07 23:14:24 +01:00
Vishal Verma
3ffb0ba9b5 libnvdimm, {btt, blk}: do integrity setup before add_disk()
Prior to 25520d55cd ("block: Inline blk_integrity in struct gendisk")
we needed to temporarily add a zero-capacity disk before registering for
blk-integrity. But adding a zero-capacity disk caused the partition
table scanning to bail early, and this resulted in partitions not coming
up after a probe of the BTT or blk namespaces.

We can now register for integrity before the disk has been added, and
this fixes the rescan problems.

Fixes: 25520d55cd ("block: Inline blk_integrity in struct gendisk")
Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-07 13:50:09 -08:00
Linus Walleij
2e7a66a8b5 drm/bridge: sii902x: Retry status read after DDI I2C
The following happens when connection a DVI output driven
from the SiI9022 using a DVI-to-VGA adapter plug:

i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.

Then no picture. Apparently the I2C engine inside the SiI9022
is not smart enough to try to fall back to DDC I2C. Or the
vendor have not integrated the electronics properly. I don't
know which one it is.

After this, the I2C bus seems stalled and the first attempt to
read the status register fails, and the code returns with
negative return value, and the display fails to initialized.

Instead, retry status readout five times and continue even
if this fails.

Tested on the ARM Versatile Express with a DVI-to-VGA
connector, it now gives picture.

Introduce a helper struct device *dev variable to make
the code more readable.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305101702.13441-1-linus.walleij@linaro.org
2018-03-07 22:48:19 +01:00
Linus Walleij
20a0dfeead drm/pl111: Handle the RealView variant separately
We want to cut down the default bpp to 16 on the RealView so
we can have a 1024x768 framebuffer console by default. The
memory bandwidth limitations makes this not work with the
PL111 default of 32bpp.

This builds on top of the earlier patches making the
framebuffer default bpp a per-variant variable.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302090948.6399-4-linus.walleij@linaro.org
2018-03-07 22:48:08 +01:00
Linus Walleij
9f8d4fe94e drm/pl111: Make the default BPP a per-variant variable
The PL110, Integrator and Versatile boards strongly prefer to
use 16 BPP even if other modes are supported, both to keep down
memory consumption and also to easier find a good match to
supported resolutions with consideration taken to the memory
bandwidth of the platforms.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302090948.6399-2-linus.walleij@linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180307084316.23623-1-linus.walleij@linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20180307084316.23623-1-linus.walleij@linaro.org
2018-03-07 22:46:46 +01:00
Linus Walleij
afe09e43b4 drm: simple_kms_helper: Fix .mode_valid() documentation
This fixes up the .mode_valid() vtable entry documentation
by copyediting the documentation from the .mode_valid()
documentation in the drm_modeset_helper_vtables.h file.

Fixes: 40275dc4ed ("drm: simple_kms_helper: Add mode_valid() callback support")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227101109.6088-1-linus.walleij@linaro.org
2018-03-07 22:38:59 +01:00
Linus Walleij
bbce9ad9c2 bridge: Elaborate a bit on dumb VGA bridges in Kconfig
It's better if we explain a bit that this pertains to
non-programmable VGA DAC bridges.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302091426.8463-1-linus.walleij@linaro.org
2018-03-07 22:38:50 +01:00
Shirish S
4a53d9045e drm/amd/display: validate plane format on primary plane
In dce110, the plane configuration is such that plane 0
or the primary plane should be rendered with only RGB data.

This patch adds the validation to ensure that no video data
is rendered on plane 0.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07 16:31:19 -05:00
James Zhu
f8bee6135e drm/amdgpu:Always save uvd vcpu_bo in VM Mode
When UVD is in VM mode, there is not uvd handle exchanged,
uvd.handles are always 0. So vcpu_bo always need save,
Otherwise amdgpu driver will fail during suspend/resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-03-07 16:30:44 -05:00
James Zhu
0e5ee33d2a drm/amdgpu:Correct max uvd handles
Max uvd handles should use adev->uvd.max_handles instead of
AMDGPU_MAX_UVD_HANDLES here.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-03-07 16:30:29 -05:00
Eric Yang
abca24007e drm/amd/display: early return if not in vga mode in disable_vga
The work around for hw bug causes S3 resume failure. Don't execute
disable vga logic if not in vga mode.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07 16:28:39 -05:00
Bhawanpreet Lakha
bd9bc355be drm/amd/display: Fix takover from VGA mode
HW Engineer's Notes:
 During switch from vga->extended, if we set the VGA_TEST_ENABLE and then
 hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly.
 Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset
 VGA_TEST_ENABLE, to leave it in the same state as before.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07 16:28:32 -05:00
Leo (Sunpeng) Li
9fe8f03bc0 drm/amd/display: Fix memleaks when atomic check fails.
While checking plane states for updates during atomic check, we create
dc_plane_states in preparation. These dc states should be freed if
something errors.

Although the input transfer function is also freed by
dc_plane_state_release(), we should free it (on error) under the same
scope as where it is created.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07 16:28:22 -05:00
Harry Wentland
c0e463d3a0 drm/amd/display: Return success when enabling interrupt
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07 16:28:15 -05:00
Harry Wentland
c0ec56449d drm/amd/display: Use crtc enable/disable_vblank hooks
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07 16:28:06 -05:00