Use the new MSR feature framework to tell userspace which VMX capabilities
are available for nested hypervisors. Before, these were only accessible
with the KVM_GET_MSR VCPU ioctl, after VCPUs had been created.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Move the MSRs to a separate struct, so that we can introduce a global
instance and return it from the /dev/kvm KVM_GET_MSRS ioctl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
vCPUs are very unlikely to get preempted when they are the only task
running on a CPU. PV TLB flush is slower that the native flush in that
case, so disable it.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Waiman Long mentioned that:
> Generally speaking, unfair lock performs well for VMs with a small
> number of vCPUs. Native qspinlock may perform better than pvqspinlock
> if there is vCPU pinning and there is no vCPU over-commitment.
This patch uses the KVM_HINTS_DEDICATED performance hint, which is
provided by the hypervisor admin, to choose the qspinlock algorithm
when a dedicated physical CPU is available.
PV_DEDICATED = 1, PV_UNHALT = anything: default is qspinlock
PV_DEDICATED = 0, PV_UNHALT = 1: default is Hybrid PV queued/unfair lock
PV_DEDICATED = 0, PV_UNHALT = 0: default is tas
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This patch introduces kvm_para_has_hint() to query for hints about
the configuration of the guests. The first hint KVM_HINTS_DEDICATED,
is set if the guest has dedicated physical CPUs for each vCPU (i.e.
pinning and no over-commitment). This allows optimizing spinlocks
and tells the guest to avoid PV TLB flush.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The loading time of a VM is quite significant with a CPU usage
reaching 100% when loading a VM that its virtio devices use a
large amount of virt-queues (e.g. a virtio-serial device with
max_ports=511). Most of the time is spend in re-sorting the
kvm_io_bus kvm_io_range array when a new eventfd is registered.
The patch replaces the existing method with an insert sort.
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Uri Lublin <ulublin@redhat.com>
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This commit implements an enhanced x86 version of S390
KVM_CAP_SYNC_REGS functionality. KVM_CAP_SYNC_REGS "allow[s]
userspace to access certain guest registers without having
to call SET/GET_*REGS”. This reduces ioctl overhead which
is particularly important when userspace is making synchronous
guest state modifications (e.g. when emulating and/or intercepting
instructions).
Originally implemented upstream for the S390, the x86 differences
follow:
- userspace can select the register sets to be synchronized with kvm_run
using bit-flags in the kvm_valid_registers and kvm_dirty_registers
fields.
- vcpu_events is available in addition to the regs and sregs register
sets.
Signed-off-by: Ken Hofsass <hofsass@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[Removed wrapper around check for reserved kvm_valid_regs. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Replace hardcoded padding size value for struct kvm_sync_regs
with #define SYNC_REGS_SIZE_BYTES.
Also update the value specified in api.txt from outdated hardcoded
value to SYNC_REGS_SIZE_BYTES.
Signed-off-by: Ken Hofsass <hofsass@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
In Hyper-V, the fast guest->host notification mechanism is the
SIGNAL_EVENT hypercall, with a single parameter of the connection ID to
signal.
Currently this hypercall incurs a user exit and requires the userspace
to decode the parameters and trigger the notification of the potentially
different I/O context.
To avoid the costly user exit, process this hypercall and signal the
corresponding eventfd in KVM, similar to ioeventfd. The association
between the connection id and the eventfd is established via the newly
introduced KVM_HYPERV_EVENTFD ioctl, and maintained in an
(srcu-protected) IDR.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[asm/hyperv.h changes approved by KY Srinivasan. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
On ARM64, the default page size has been 64K on some distributions, and
we should allow ARM64 people to play null_blk.
This patch fixes the issue by extend page bitmap size for supporting
other non-4KB PAGE_SIZE.
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Kyungchan Koh <kkc6196@fb.com>,
Cc: weiping zhang <zhangweiping@didichuxing.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for r8a7743. The Renesas RZ/G1M(R8A7743)PCIe controller
is identical to the R-Car Gen2 family.
No driver change is needed due to the fallback compatible value
"renesas,pcie-rcar-gen2".
Adding the SoC-specific compatible values here has three purposes:
1. Document which SoCs have this hardware module,
2. Allow checkpatch to validate compatible values.
3. Allow the driver to support SoC specific implementations in future
as necessary.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Links like :ref:`VIDIOC_STREAMON` expand to "ioctl VIDIOC_STREAMON,
VIDIOC_STREAMOFF". Thus our reader will think we are talking about
STREAMON _and_ STREAMOFF, but only one of the two actually applies
in some cases.
Fix by adding a link title, so the reader will read only the correct
ioctl name.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Previously, we would spin waiting for all waiters to wake up and notice
their request had completed before we would reset the seqno upon
wraparound. However, we can mark their waits as complete and wake them
up directly using the existing machinery for handling the flushing of
missed wakeups when idling.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306130143.13312-2-chris@chris-wilson.co.uk
Since commit fd10e2ce99 ("drm/i915/breadcrumbs: Ignore unsubmitted
signalers"), we cancel the signaler when retiring the request and so
upon wraparound, where we wait for all requests to be retired, we no
longer need to spin waiting for the signaling thread to release its
references to the in-flight requests, and so we can assert that the
signaler is idle.
References: fd10e2ce99 ("drm/i915/breadcrumbs: Ignore unsubmitted signalers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306130143.13312-1-chris@chris-wilson.co.uk
The ">" should be ">=" so that we don't read one element beyond the end
of the array.
Fixes: 8a77009be4 ("media: ov5695: add support for OV5695 sensor")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update the register 0x3503 to use 'no delay latch' for gain.
This makes sensor to output the first frame as normal rather
than a very dark one.
Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The PM runtime operations are unused when CONFIG_PM is disabled,
leading to a harmless warning:
drivers/media/platform/renesas-ceu.c:1003:12: error: 'ceu_runtime_suspend' defined but not used [-Werror=unused-function]
static int ceu_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~
drivers/media/platform/renesas-ceu.c:987:12: error: 'ceu_runtime_resume' defined but not used [-Werror=unused-function]
static int ceu_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~
This adds a __maybe_unused annotation to shut up the warning.
Fixes: 32e5a70dc8 ("media: platform: Add Renesas CEU driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move kvm.arch.hyperv initialization and cleanup to separate functions.
For now only a mutex is inited in the former, and the latter is empty;
more stuff will go in there in a followup patch.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The CSTRST_CPON mask was wrongly assigned to BIT(1) instead of BIT(0).
Fix that by changing the mask opportunely.
Reported-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Commit 57e6f0d7b8 ("typec: tcpm: Only request matching pdos") is causing
a regression, before this commit e.g. the GPD win and GPD pocket devices
were charging at 9V 3A with a PD charger, now they are instead slowly
discharging at 5V 0.4A, as this commit causes the ports max_snk_mv/ma/mw
settings to be completely ignored.
Arguably the way to fix this would be to add a PDO_VAR() describing the
voltage range to the snk_caps of boards which can handle any voltage in
their range, but the "typec: tcpm: Only request matching pdos" commit
looks at the type of PDO advertised by the source/charger and if that
is fixed (as it typically is) only compairs against PDO_FIXED entries
in the snk_caps so supporting a range of voltage would require adding a
PDO_FIXED entry for *every possible* voltage to snk_caps.
AFAICT there is no reason why a fixed source_cap cannot be matched against
a variable snk_cap, so at a minimum the commit should be rewritten to
support that.
For now lets revert the "typec: tcpm: Only request matching pdos" commit,
fixing the regression.
Fixes: 57e6f0d7b8 ("typec: tcpm: Only request matching pdos")
Cc: Badhri Jagan Sridharan <badhri@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without pm_runtime_{get,put}_sync calls in place, reading
vbus status via /sys causes the following error:
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060
pgd = b333e822
[fa0ab060] *pgd=48011452(bad)
[<c05261b0>] (musb_default_readb) from [<c0525bd0>] (musb_vbus_show+0x58/0xe4)
[<c0525bd0>] (musb_vbus_show) from [<c04c0148>] (dev_attr_show+0x20/0x44)
[<c04c0148>] (dev_attr_show) from [<c0259f74>] (sysfs_kf_seq_show+0x80/0xdc)
[<c0259f74>] (sysfs_kf_seq_show) from [<c0210bac>] (seq_read+0x250/0x448)
[<c0210bac>] (seq_read) from [<c01edb40>] (__vfs_read+0x1c/0x118)
[<c01edb40>] (__vfs_read) from [<c01edccc>] (vfs_read+0x90/0x144)
[<c01edccc>] (vfs_read) from [<c01ee1d0>] (SyS_read+0x3c/0x74)
[<c01ee1d0>] (SyS_read) from [<c0106fe0>] (ret_fast_syscall+0x0/0x54)
Solution was suggested by Tony Lindgren <tony@atomide.com>.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.
Commit de3af5bf25 ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.
Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):
[ 29.103520] usb 1-8: string descriptor 0 read error: -110
[ 34.363097] usb 1-8: can't set config #1, error -110
Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:
[ 35.400533] usbhid 1-8:1.0: can't add hid device: -110
[ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110
The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.
Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().
The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.
Fixes: de3af5bf25 ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cxd2099 driver is now maintained and being taken care of by
* Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As all drivers using the cxd2099 are converted to handle attach/detach
the generic I2C client way, the static inline cxd2099_attach isn't
required anymore. Thus cleanup cxd2099.h from the remainders, the adr
struct member also isn't used anymore.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Report I2C_FUNC_I2C in .functionality() as well. The I2C interface can
handle this fine and even is required for all I2C client drivers that
utilise the regmap API which are used from within the ngene driver.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Change the way the cxd2099 hardware is being attached to the new I2C
client interface way.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A typo broke the comparison.
Fixes: cbeef22fd6 ("usb: uas: unconditionally bring back host after reset")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@kernel.org
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a common device tree for all Nuvoton NPCM750 BMCs and a board
specific device tree for the NPCM750 (Poleg) evaluation board.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Avi Fishman <avifishman70@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Tomer Maimon <tmaimon77@gmail.com>
Tested-by: Avi Fishman <avifishman70@gmail.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables level resets on Meson8b SoCs. Level resets have been
previously implemented for the newer Meson GX SoCs, so this removes
the distinction between the two families in the meson-reset driver.
Also enables the ASPEED LPC reset controller on ASPEED AST2400 and
AST2500 SoCs, by adding compatibles to the simple-reset driver.
-----BEGIN PGP SIGNATURE-----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=Ghzu
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.17' of git://git.pengutronix.de/git/pza/linux into next/drivers
Pull "Reset controller changes for v4.17" from Philipp Zabel:
This enables level resets on Meson8b SoCs. Level resets have been
previously implemented for the newer Meson GX SoCs, so this removes
the distinction between the two families in the meson-reset driver.
Also enables the ASPEED LPC reset controller on ASPEED AST2400 and
AST2500 SoCs, by adding compatibles to the simple-reset driver.
* tag 'reset-for-4.17' of git://git.pengutronix.de/git/pza/linux:
reset: simple: Enable for ASPEED systems
dt-bindings: aspeed-lpc: Add reset controller
reset: meson: enable level reset support on Meson8b
As the media subdevice is registered with 'v4l2_async_register_subdev()'
unregister it at module removal time with
'v4l2_async_unregister_subdev()'
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
msleep() can sleep up to 20ms.
As suggested by Documentation/timers/timers_howto.txt replace it with
usleep_range() with up to 5ms delay.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add an empty line before return at the end of functions.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A lot of comments that would fit a single line were spread on two or
more lines. Also fix capitalization and punctuation where appropriate.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Align all function parameters to first open brace when declaring
functions.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
msleep() can sleep up to 20ms.
As suggested by Documentation/timers/timers_howto.txt replace it with
usleep_range() with up to 5ms delay.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Two minor style fixes, align function parameter and remove un-necessary
spaces.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Yet more whitespace and style neatening
o Add blank lines before returns
o Reverse a logic test and return early on error
o Move formats to same line as dev_<level> calls
o Remove an unnecessary period from a logging message
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update multiline statements to open parenthesis.
Update a ?: to a single line.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A lot of comments that would fit a single line were spread on two or
more lines. Also fix capitalization and punctuation where appropriate.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Dynamic debug can be instructed to add the function name to the debug
output using the +f switch, so there is no need for the dax modules to
do it again. If a user decides to add the +f switch for the dax modules'
dynamic debug this results in double prints of the function name.
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
OF graph describes MHL data lanes between MHL and respective USB
connector.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Since USB connector bindings are available we can describe it on TM2(e).
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Dynamic debug can be instructed to add the function name to the debug
output using the +f switch, so there is no need for the libnvdimm
modules to do it again. If a user decides to add the +f switch for
libnvdimm's dynamic debug this results in double prints of the function
name.
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Fix random memory corruption when running as guest2 (e.g. KVM in
LPAR) and starting guest3 (nested KVM) with many CPUs (e.g. a nested
guest with 200 vcpu)
- io interrupt delivery counter was not exported
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=mxZT
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: Fixes
- Fix random memory corruption when running as guest2 (e.g. KVM in
LPAR) and starting guest3 (nested KVM) with many CPUs (e.g. a nested
guest with 200 vcpu)
- io interrupt delivery counter was not exported
Add node for the hardware crypto acceleration used in the artpec6 SoC.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>