There are no in tree users of platform-data for the rt5651 codec driver,
so lets remove support for it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The read/write pointers on sdma4 devices increment
beyond the ring size and should be masked. Tested
on my Ryzen 2400G.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sometimes GPU is switched to other VFs and won't swich
back soon, so the kiq reg access will not signal within
a short period, instead of busy waiting a long time(MAX_KEQ_REG_WAIT)
and returning TMO we can istead sleep 5ms and try again
later (non irq context)
And since the waiting in kiq_r/weg is busy wait, so MAX_KIQ_REG_WAIT
shouldn't set to a long time, set it to 10ms is more appropriate.
if gpu already in reset state, don't retry the KIQ reg access
otherwise it would always hang because KIQ was already die usually.
v2:
replace schedule() with msleep() for the wait
v3:
use while loop for the wait repeating
use macros for the sleep period
more description for it
v4:
drop unused variable
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com
Reviewed-by: Pixel Ding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vq->vq.num_free hasn't been changed when error happens,
so it shouldn't be changed when handling the error.
Fixes: 780bc7903a ("virtio_ring: Support DMA APIs")
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
1)create a routine "handle_vram_lost" to do the vram
recovery, and put it into amdgpu_device_reset/reset_sriov,
this way no need of the extra paramter to hold the
VRAM LOST information and the related macros can be removed.
3)show vram_recover failure if time out, and set TMO equal to
lockup_timeout if vram_recover is under SRIOV runtime mode.
4)report error if any ip reset failed for SR-IOV
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
found recover_vram_from_shadow sometimes get executed
in paralle with SDMA scheduler, should stop all
schedulers before doing gpu reset/recover
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create sound card with NAU88L24 codec in Intel Cherryview-based platforms,
Cherrytrail and Braswell.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
84676c1f21 ("genirq/affinity: assign vectors to all possible CPUs")
has switched to do irq vectors spread among all possible CPUs, so
pass num_possible_cpus() as max vecotrs to be assigned.
For example, in a 8 cores system, 0~3 online, 4~8 offline/not present,
see 'lscpu':
[ming@box]$lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 2
NUMA node(s): 2
...
NUMA node0 CPU(s): 0-3
NUMA node1 CPU(s):
...
1) before this patch, follows the allocated vectors and their affinity:
irq 47, cpu list 0,4
irq 48, cpu list 1,6
irq 49, cpu list 2,5
irq 50, cpu list 3,7
2) after this patch, follows the allocated vectors and their affinity:
irq 43, cpu list 0
irq 44, cpu list 1
irq 45, cpu list 2
irq 46, cpu list 3
irq 47, cpu list 4
irq 48, cpu list 6
irq 49, cpu list 5
irq 50, cpu list 7
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
ashmem_mutex create a chain of dependencies like so:
(1)
mmap syscall ->
mmap_sem -> (acquired)
ashmem_mmap
ashmem_mutex (try to acquire)
(block)
(2)
llseek syscall ->
ashmem_llseek ->
ashmem_mutex -> (acquired)
inode_lock ->
inode->i_rwsem (try to acquire)
(block)
(3)
getdents ->
iterate_dir ->
inode_lock ->
inode->i_rwsem (acquired)
copy_to_user ->
mmap_sem (try to acquire)
There is a lock ordering created between mmap_sem and inode->i_rwsem
causing a lockdep splat [2] during a syzcaller test, this patch fixes
the issue by unlocking the mutex earlier. Functionally that's Ok since
we don't need to protect vfs_llseek.
[1] https://patchwork.kernel.org/patch/10185031/
[2] https://lkml.org/lkml/2018/1/10/48
Acked-by: Todd Kjos <tkjos@google.com>
Cc: Arve Hjonnevag <arve@android.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+8ec30bb7bf1a981a2012@syzkaller.appspotmail.com
Signed-off-by: Joel Fernandes <joelaf@google.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vfio-ccw only supports command mode for channel programs, not transport
mode. User space is supposed to already take care of that and pass us
command-mode ORBs only, but better make sure and return an error to
the caller instead of trying to process tcws as ccws.
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This driver defined constants FRAME_TYPE_* to represent frame control
field codes; however, these constants are already defined in the header
'linux/ieee80211.h' as IEEE80211_STYPE_*. This change removes the locally
defined constants and substitutes the kernel's constants.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver defined constants BSS_CAP_* to represent WLAN capability
codes; however, these constants are already defined in the header
'linux/ieee80211.h' as WLAN_CAPABILITY_*. This change removes the locally
defined constants and substitutes the kernel's constants.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code that generates a WLAN capability mask is repeated in five
functions. This change refactors that code into a new function, which is
called now in each of those functions.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SSID_MAX_SIZE is a constant defined locally in ks_hostif.h, but it should
be replaced with IEEE80211_MAX_SSID_LEN from the kernel's 802.11 header,
of which it is just a copy.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The case statement in get_ap_information() should not use literal integers
to parse information element IDs when these values are provided by name
in 'enum ieee80211_eid' in the header 'linux/ieee80211.h'.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Triggering PPC EEH detection and handling requires a memory mapped read
failure. The NVMe driver removed the periodic health check MMIO, so
there's no early detection mechanism to trigger the recovery. Instead,
the detection now happens when the nvme driver handles an IO timeout
event. This takes the pci channel offline, so we do not want the driver
to proceed with escalating its own recovery efforts that may conflict
with the EEH handler.
This patch ensures the driver will observe the channel was set to offline
after a failed MMIO read and resets the IO timer so the EEH handler has
a chance to recover the device.
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
[updated change log]
Signed-off-by: Keith Busch <keith.busch@intel.com>
The error variable ret is currently a u8 and so two comparisons
to see if an error return is less than zero will always be false
because ret is unsigned. Fix this by making ret an int.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vfio-ccw documentation comes from the cover letter of the
original patch submission, which shows in some parts. Give it some
love; in particular:
- Remove/rework statements that make sense in a cover letter, but not
in regular documentation.
- Fix some typos.
- Describe the current limitations in more detail.
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The only core change is the fix for possible memory corruption by
ALSA ctl API since 4.14 kernel due to a thinko. The rest are all
device-specific: in addition to the usual suspects (HD-audio and
USB-audio fixups), a few LPE HDMI audio fixes came in at this time.
-----BEGIN PGP SIGNATURE-----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=UY/c
-----END PGP SIGNATURE-----
Merge tag 'sound-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only core change is the fix for possible memory corruption by ALSA
ctl API since 4.14 kernel due to a thinko.
The rest are all device-specific: in addition to the usual suspects
(HD-audio and USB-audio fixups), a few LPE HDMI audio fixes came in at
this time"
* tag 'sound-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: x86: Fix potential crash at error path
ALSA: x86: Fix missing spinlock and mutex initializations
ALSA: control: Fix memory corruption risk in snd_ctl_elem_read
ALSA: hda - Fix pincfg at resume on Lenovo T470 dock
ALSA: usb-audio: Add a quirck for B&W PX headphones
ALSA: hda: Add a power_save blacklist
ALSA: x86: hdmi: Add single_port option for compatible behavior
The DPAA2 Ethernet driver incorrectly assumes virtual addresses
are always 64b long, which causes compiler errors when building
for a 32b platform.
Fix this by using explicit casts to uintptr_t where necessary.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop dependency on ARCH_LAYERSCAPE (which in turn depends on ARM64),
thus allowing this driver to compile on all architectures supported
by the fsl-mc bus driver.
This was compile tested on:
- powerpc (corenet_basic_defconfig, ppc64_defconfig)
- x86 (i386_defconfig, x86_64_defconfig, needs CONFIG_OF)
- arm64 (defconfig)
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the zillion different compilers out there, never use -Werror,
otherwise your code will end up breaking the build for odd reasons.
Like now, if this driver is enabled, it breaks the build due to a
function that could be marked static. So it's obvious no one is even
paying attention to this driver :(
Cc: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DPIO driver incorrectly assumes virtual addresses are always
64b long, which causes compiler errors when building for a 32b
platform.
Fix this by using explicit casts to uintptr_t where necessary.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the allocation of priv->oldaddr is not null checked which will
lead to subsequent errors when accessing priv->oldaddr. Fix this with
a null pointer check and a return of -ENOMEM on allocation failure.
Detected with Coccinelle:
drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test,
possible model on line 1723
Fixes: 8fc8598e61 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rt5663 requires mclk/sclk early to synchronize its internal clocks.
Enable these clocks early.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Kevin Cheng <kevin.cheng@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Bay Trail SST-DSP firmware version looses track of all streams over a
suspend/resume, failing any attempts to resume and/or free streams, with
a SST_ERR_INVALID_STREAM_ID error.
This commit adds support for free-ing the streams on suspend and
re-allocating them on resume, fixing suspend/resume issues on devices
using this firmware version.
This new behavior gets triggered by a new flag in sst_platform_info which
only gets set on Bay Trail platforms.
This has been tested on the following devices:
-Asus T100TA, Bay Trail + ALC5642 codec
-Ployer MOMO7W, Bay Trail CR + ALC5652 codec
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the struct snd_sst_alloc_mrfld alloc parameters from the stack
into struct stream_info and add a new sst_realloc_stream() function which
can re-alloc a stream with the same parameters as before.
This is a preparation patch for fixing suspend/resume issues with some
SST / DSP firmware versions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
STREAM_DECODE is completely unused, status == STREAM_RESET was checked
for, but never set, remove both.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sst_init_stream() has only one caller and all its function arguments are
unused. Inline it on the one call site and remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the unused ops and str_id members from the stream_info struct.
While at it also remove some kernel-doc comments for members which have
already been removed in the past.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The value returned by sst_prepare_and_post_msg() is a negated SST_ERR_*
value, so we must check for -SST_ERR_INVALID_STREAM_ID. Note that
sst_pause_resume() already has the correct check.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the same #define from multiple '.c' files to common header file.
Instead of having same macro in different '.c' files, now kept in
common '.h' file.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename label name starting with '_' to follow as per linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor wilc_wlan_handle_txq() by removing unnecessary while(0)
loop. "Line over 80 char" issues in wilc_wlan_handle_txq() are fix by
reducing extra leading tab.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function pointer 'complete' in 'struct mbo' should use an identifier
for its argument.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It isn't necessary for the driver to log out-of-memory errors, so
these have been removed and the functions simply return -ENOMEM.
Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move logical continuation '&&' to the previous line to conform to the
Linux kernel coding style. Issue found using checkpatch.
Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace NULL comparison of the variable with just the variable name to
conform to the Linux kernel coding style. Issue found using checkpatch.
Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add trailing */ on a separate line for block comments to conform to
the Linux kernel coding style. Issue found using checkpatch.
Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kmemdup instead of kzalloc and memcpy to simplify the code.
Issue found with coccicheck.
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a pin group on the Meson.
- Assign maintainers for Freescale/NXP pin controllers.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJal7MkAAoJEEEQszewGV1zfW8QAJbeMR/FZCmufgSaeHi1HuTQ
Q6naMUT+23zaBjFwHarXjvlH2YxGqGDRu22fQxn44Ruxh4utCG9dkp800Si3Rzit
FmIiKBBRw/MnjDmmWMq+SkpaAzseCXg97us6beFk9ZoO+/t/JrZenuVgk/XQtrv9
7Fy98OvU0nXr366Jn2ZI8q4g57XpRbGX+2x/DIs68B7wOLBQpVl/OId4n+foyVmR
VxRzGS9f6fnXK4BxSUGPzdcCdbRDLZIYxuLXJoAzQDAAEbby7/qKyPHeIsZYWBBW
Jsn1lun/tcPVFFhYR6Fo5w/45UW7+rjfm4MFR3zPtZfEusflMd9byBp7+PPoV1X4
CQ4TB3yW5+0I/xjZVPgU6UcbnZWTUGeFy8LZ4NIzTb9I8hxGrkoVlHZtft5syFtD
kZViwRG5a1txWH+9/5yJnLg0KKS3+rh2Knn/GJTV4NdJcj/18Ye4NEueXIcJzYlX
947aSnBJpMfOX0I6tBg0VW8tb2js2ROHLg5sOMbGAaCyr3KfZkOnCze7lWSV0VmS
v8K9zBtUjMFPddXG6O4EvwYOax0W5bnFfJ6MmcEnGxCKdEtUShaJNRiyPzGYei0O
s/znLxQmhV4IAKt6AQ/bLlKeNpvoeC7THBBjhjKhn5j+QNhBqtUVvVrUh/tv2DEQ
t0XrzQMKSYcbfiPKQMI9
=jVcD
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two smallish pin control fixes: one actual code fix for the Meson and
a MAINTAINERS update.
Summary:
- fix a pin group on the Meson
- assign maintainers for Freescale/NXP pin controllers"
* tag 'pinctrl-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: add Freescale pin controllers
pinctrl: meson-axg: adjust uart_ao_b pin group naming
- Fix up device tree properties readout caused by my own
refactorings.
-----BEGIN PGP SIGNATURE-----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=XcVM
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Fix up device tree properties readout caused by my own refactorings"
* tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Handle deferred probing in of_find_gpio() properly
gpiolib: Keep returning EPROBE_DEFER when we should
Add group configuration for uarts that are cut down
variants, the standard being full, i.e. all signals,
flow control, i.e. rx/tx and cts/rts, and rx/tx only.
This allows us to be more precise in which pins we're
actually using.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix a typo in pkt_start_recovery.
Fixes: 74d46992e0 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_devname use __bdevname to display the device name, and can
only show the major and minor of the part0,
Fix this by using disk_name to display the correct name.
Fixes: 74d46992e0 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>