Commit graph

752,318 commits

Author SHA1 Message Date
Linus Torvalds
b5e792f11a RISC-V: smb_mb() fix for 4.16-rc4
This week we have a single fix: replacing smp_mb() with __smp_mb().  We
 were the only architecture with smp_mb() and it appears to just be
 clearly wrong, so I think this is a pretty safe patch for an RC.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlqUQEETHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQciND/wJOHzf/O7aHWlt7UYvzKsqgIdxNKiH
 IWbv4jTmJGJju10Ht5jImuIxSYJ5gu24Vj5f+/XkFRZfTGrOGgByXh37RuFP51kH
 3yFqzDoBfmBHu8NTeyAb6hHtozvcVTBYynSqKBJzsCz3mrBgqobvzoii1R2TX4lc
 +cPNffv+YRPZSHdHOpaytYIYdVxbcFmsGocftjzZ9AbR87mbT1zxDJV+YHgH86vE
 2qqaWYTJChCCQo+We57+0HheMtzjvuC9wXRg7yqDOhe5mvpxNQf/RLhr4cxJtcFN
 i96ERaRg0B5PAU+Pcql0wVL9oigd7bPv4Ncc+rjPG9efkXDKeN/ueD1az9yWRqE1
 SUjJROel5tF6Yxytn2XX+MEIPEy0AO1WlD+9o23aoaKXHgSu8kMU3Zgryvs+S6W5
 VkZeeUk/VV4YIQy8HwMujgjKzLXOoBjAHOvSyyf75ERkYbQxpEjkWRZWtjsiLGbP
 lgHX59p3C2J3w/xLA+rUE3gdPm4qY45l232RJFlFS6e+wG32/Fw+Yc+PxFHhPARK
 J+mhAVswhfrC4x9KbL83y8Zf9RvJ4y4qnpJAOyze+OgARq30SLzr6ul+5nHQAkb+
 4lcPS0ROsxpa83BnGC8bfz9TGoomdYJrT8piV+lx8wTPrZQg4gfAoStSyu89V0Vz
 LBcwO6MObWcdhw==
 =ke4H
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.16-rc4_smp_mb' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fix from Palmer Dabbelt:
 "This week we have a single fix: replacing smp_mb() with __smp_mb().

  We were the only architecture with smp_mb() and it appears to just be
  clearly wrong, so I think this is a pretty safe patch for an RC"

* tag 'riscv-for-linus-4.16-rc4_smp_mb' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  riscv/barrier: Define __smp_{mb,rmb,wmb}
2018-02-28 14:55:07 -08:00
Tony Lindgren
e33509c19d ARM: OMAP2+: Fix typo for wakeup_ns_pa_addr
This is in bank1, not in bank3.

Cc: Tero Kristo <t-kristo@ti.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:47:13 -08:00
Tony Lindgren
2402ff05c6 ARM: OMAP2+: Use v7_invalidate_l1 in omap4_finish_suspend
We can use just v7_invalidate_l1 here instead of v7_flush_dcache_all
like the comments say.

Cc: Tero Kristo <t-kristo@ti.com>
Cc: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:46:53 -08:00
Lingutla Chandrasekhar
c52232a49e timers: Forward timer base before migrating timers
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.

If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.

In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.

But there is a worse problem than that. The following sequence of events
illustrates it:

 - CPU0 timer1 is queued expires = 59969 and base->clk = 59131.

   The timer is queued at wheel level 2, with resulting expiry time = 60032
   (due to level granularity).

 - CPU1 enters idle @60007, with next timer expiry @60020.

 - CPU0 is hotplugged at @60009

 - CPU1 exits idle and runs the control thread which migrates the
   timers from CPU0

   timer1 is now queued in level 0 for immediate handling in the next
   softirq because the requested expiry time 59969 is before CPU1 base->clk
   60007

 - CPU1 runs code which forwards the base clock which succeeds because the
   next expiring timer. which was collected at idle entry time is still set
   to 60020.

   So it forwards beyond 60007 and therefore misses to expire the migrated
   timer1. That timer gets expired when the wheel wraps around again, which
   takes between 63 and 630ms depending on the HZ setting.

Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.

[ tglx: Massaged comment and changelog ]

Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
2018-02-28 23:34:33 +01:00
Arnd Bergmann
8f148f3292 This pull request contains Broadcom SoCs drivers fixes for 4.16, please
pull the following:
 
 - Markus provides two minor fixes to the Broadcom STB DPFE driver, one
   to properly mask bits, and a second one to use the correct type. The
   third commit is a consequence of a newer DFPE firmware which would
   unfortunately crash without appropriate kernel changes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJalfwrAAoJEIfQlpxEBwcEpdMP/RW8vxZvJVbeOGIdTZt/lzGZ
 d36knOHqtK3+Wqx5PD1M34C6BavipHHCxpc358EMwtlwHGzwatmJIXgZYO54x3Ug
 Mlgpv5INqN7k2fwVvS3yKRDSFU4HRUo5yhocdKJVUibFwGbMhLLjBw5csx9rmHue
 AZ61gUVGT7Ok5RYoQ3ug4I4IG2sWVBWRAEYLnk+MhCoLCd8ONhA+SVxJyvl+cCcr
 GUMBSSEOBQ2NKlKvC5d8FKEAlDyY1KSPxcytLYoj9lOB38vqoSA8uxDZKpPn/+wu
 12m9mLfu2WtNg5RxLmyDjAtBQVnNhEmAc6dYmSGQR1m30ogV+ZT3KHENR3Yk59yA
 IzUKzYr2/m1kNpW3sW1RX5GMRIXEDozyrDWTiWWV6uQ7N+QRK1KmtZdGOTb1jcwI
 if4Vp7/TDOXeQEbZ0SETxF+vxi3tJoBlKDXeNopG8N/JzBfET6mkKx0y+v9f/dQ6
 Tv1h8iEhHFNm1GKFZqegnBuF7m9IDR8X3PktRdnN9HTs57x159xICtKz4AQDMXwq
 vPo6/EHdH+EQNVqwFijhIN7q1ZtZS0ocUJ/H1BS5mevIiNz3PEvp4H79BtFMCGj9
 JVlTxrxLK5ezhmjxwM4a9zxPpDneiZAzICqxCiPp98xr2OwO7O1DJW9zg5o8aQY7
 VSJj/U60jH/QqaFqa8bD
 =HV7L
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux into fixes

Pull "Broadcom drivers fixes for 4.16" from Florian Fainelli:

This pull request contains Broadcom SoCs drivers fixes for 4.16, please
pull the following:

- Markus provides two minor fixes to the Broadcom STB DPFE driver, one
  to properly mask bits, and a second one to use the correct type. The
  third commit is a consequence of a newer DFPE firmware which would
  unfortunately crash without appropriate kernel changes.

* tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux:
  memory: brcmstb: dpfe: support new way of passing data from the DCPU
  memory: brcmstb: dpfe: fix type declaration of variable "ret"
  memory: brcmstb: dpfe: properly mask vendor error bits
2018-02-28 23:27:21 +01:00
Kishon Vijay Abraham I
18aa0f4bca ARM: dts: am57xx-idk: Select pull down for mmc1_clk line in default mode
During a short period when the bus voltage is switched from 3.3v to 1.8v,
(to enumerate UHS mode), the mmc module is disabled and the mmc IO lines
are kept in a state according to the programmed pad mux pull type.

According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications
Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the
host should hold CLK low for at least 5ms.

In order to keep the card line low during voltage switch, the pad mux of
mmc1_clk line should be configured to pull down.

This is specific to am57xx-idk (and not all dra72/dra74 based boards)
since mmc1_clk line in am57xx-idk is not connected to an external
pullup.

While at that change the order of header files in am571x-idk.dts and
am572x-idk.dts so that the modified pinctrl values in am57xx-idk-common
could take effect.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:15 -08:00
Kishon Vijay Abraham I
0e43884cca ARM: dts: dra71-evm: Select pull down for mmc1_clk line in default mode
During a short period when the bus voltage is switched from 3.3v to 1.8v,
(to enumerate UHS mode), the mmc module is disabled and the mmc IO lines
are kept in a state according to the programmed pad mux pull type.

According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications
Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the
host should hold CLK low for at least 5ms.

In order to keep the card line low during voltage switch, the pad mux of
mmc1_clk line should be configured to pull down.

This is specific only to dra71-evm (and not all dra72 based boards) since
mmc1_clk line in dra71-evm is not connected to an external pullup.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:14 -08:00
Ravikumar Kattekola
f4aa1bd5b4 ARM: dts: dra71-evm: Correct evm_sd regulator max voltage
Correct vpo_sd_1v8_3v3 regulator max voltage to 3.3V

Fixes: 9868bc585ae2 ("ARM: dts: Add support for dra718-evm")
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:14 -08:00
Kishon Vijay Abraham I
1eab48f376 ARM: dts: dra76-evm: Add "vqmmc-supply" property for mmc2
Add "vqmmc-supply" property for mmc2 to indicate the supply connected
to the IO lines.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:13 -08:00
Kishon Vijay Abraham I
4dd7f7a71d ARM: dts: am57xx-idk: Add "vqmmc-supply" property for mmc2
Add "vqmmc-supply" property for mmc2 to indicate the supply connected
to the IO lines.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:12 -08:00
Kishon Vijay Abraham I
a9aa4e6e4f ARM: dts: dra7-evm: Add "vqmmc-supply" property for mmc2
Add "vqmmc-supply" property for mmc2 to indicate the supply connected
to the IO lines.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:12 -08:00
Kishon Vijay Abraham I
bcce7918e6 ARM: dts: dra7-evm: Remove mmc specific pinmux
mmc specific pinmux is selected from dra74x-mmc-iodelay.dtsi, so remove
it in dra7-evm.dts

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:11 -08:00
Kishon Vijay Abraham I
3df7e0f398 ARM: dts: am57xx-beagle-x15: Add "vqmmc-supply" property for mmc2
Add "vqmmc-supply" property for mmc2 to indicate the supply connected
to the IO lines.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:10 -08:00
Sekhar Nori
0ec76a63e5 ARM: dts: dra76-evm: Add pinctrl data for higher speed MMC/SD modes
The SD card interface on DRA76x EVM can support
high speed SD cards. The eMMC onboard can support
upto HS200 mode.

Enable support for these higher speed modes in the
device-tree file.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:10 -08:00
Sekhar Nori
d48bea5732 ARM: dts: dra76-evm: Shift to using common IOdelay data
Now that we have a device-tree include file with common
MMC/SD IOdelay data for DRA76x SoC, shift the EVM device-tree
file to using that.

Tested-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:09 -08:00
Sekhar Nori
008599e2af ARM: dts: dra76x: Create a common file with MMC/SD IOdelay data
Add a common device-tree include file with MMC/SD IOdelay data
for DRA76x SoC.

In the most common case, IOdelay data available in datamanual
can directly be used. This file caters to that common case.

Data is based on DRA76x datamanual, SPRS993A, revised July 2017.

Tested-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:27:08 -08:00
Arnd Bergmann
c98e140ff5 This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
4.16, please pull the following:
 
 - Mathieu fixes leading 0x and 0's from bindings and Device Tree source
   files, he has done this treewide and most of his changes are already in
   4.16
 
 - Stefan provides two changes to the BCM283x DTS files in order to fix
   DTC warnings
 
 - Florian fixes the amount of RAM on the BCM958625HR reference board to
   properly limit to what is initialized by the bootloader
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJalfuUAAoJEIfQlpxEBwcEaMoQAIR2oLcNZcrUzsgOuBSQ/m1N
 +EpXw5TIeDzZRIdNTqofcldGDn0FMnAsPEBnMMYCti+2iPntPGK64IFAD0u7E8JW
 +CU6sfk3SYijPP/nz5/KOSwRZ2KrDombYx73yrXqY2hs4kYupT078NfiI70jZYSB
 6v8cua4Pg/Uw9c2ZSC/lkgrW3G1ZImAxA6tgAOZvRaq7qgCBlBvWEweLIgMcBAGY
 Eq5p6KsmC01/1QGNV0sL9v90Mg8uAe3IJK0hGgk57BeYERcyVZ/V1C6veQmiiyjj
 XYcILm2ww3KOfbZYslwKBfr9V76lFcsTPQD16Z8IOWTL9X/B0DRXDXiRnUX5P6w+
 ZIzVBjLH8UxSU5bgD2tXVBWfEKs/kgvQPAv+8FlpCU0bY7fB2y8E6Pr44FVH/dTV
 7Vkm60Jz9AFGVjaqhx+t8hyjQ7g2NQGwonWYGUWYXD7Wi+OK7cazC49lnebZJyPN
 rSJjOWGxblHUAh2CjGUQNyk4CplbUybuo8441xacGK2BXJS0gl+xvGdxY+uaUcbc
 zMb1Ox4I0gpe8xpWcc7vyKt+cgWCaXnyLHpFdcaC3bBT63O04yVU5mirlHYQu/NR
 R/yY7lPStA+DzL6uihRi4K05+BoO12J7I3Mm0Wq//KgE1ij7LeHL7Nzy+AzQI2Rs
 Dy1H//EWpDvfZTbONIwz
 =9RVY
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes

Pull "Broadcom devicetree fixes for 4.16" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
4.16, please pull the following:

- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
  files, he has done this treewide and most of his changes are already in
  4.16

- Stefan provides two changes to the BCM283x DTS files in order to fix
  DTC warnings

- Florian fixes the amount of RAM on the BCM958625HR reference board to
  properly limit to what is initialized by the bootloader

* tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Move arm-pmu out of soc node
  ARM: dts: bcm283x: Fix unit address of local_intc
  ARM: dts: NSP: Fix amount of RAM on BCM958625HR
  ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
2018-02-28 23:26:21 +01:00
Alexandre Torgue
20f4ed3ae5 MAINTAINERS: update entries for ARM/STM32
Changes old git repository to the maintained one and adds more patterns.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-28 23:25:12 +01:00
Kishon Vijay Abraham I
5bfd9c8e7b ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7 based SoC's
can use sdhci-omap driver for eMMC/SD/SDIO controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:24:57 -08:00
Kishon Vijay Abraham I
1b75c1934a ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7/k2g based SoC's
can use sdhci-omap for eMMC/SD/SDIO controller..

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 14:24:53 -08:00
Arnd Bergmann
36b38aef57 i.MX fixes for 4.16:
- Fix i.MX GPC driver to remove power domains only when they are
    initialized in imx_gpc_probe().
  - Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include
    imx6dl.dtsi instead of imx6q.dtsi.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJalfO8AAoJEFBXWFqHsHzOPk4IALx0Gl07tgaTy2VgZJT2w0ud
 ZoyeicSNxfM42auRHjC6QhYpQztw8+k4PCuGmUOutHc2Hbw21EXDxLiSwYgGarBR
 3OuYShxBg6IExpUk7TM0kDFU0Z4GcpTjAovloM7yjLxCj88dzS+NIiUwPSl02kTp
 iAGxVtTQOYLotJFZLQ+DGH3SuaEvOEzeQZz/v4v2/z1IsJRI5IQ2ILtSFEOYhMwh
 vgagvvHopS2jIfLXd47PJJvUQuRjXH00FMvrEmBT2b31HJDU2uKn+y4BtMCJHzJV
 cTaCwKcrJcLCH2tv5LVUg86VcbL7qbMGjqKQk4aSuEtMtJkpkD4palNG+y69N9g=
 =NKMF
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Pull "i.MX fixes for 4.16" from Shawn Guo:

 - Fix i.MX GPC driver to remove power domains only when they are
   initialized in imx_gpc_probe().
 - Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include
   imx6dl.dtsi instead of imx6q.dtsi.

* tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
  soc: imx: gpc: de-register power domains only if initialized
2018-02-28 23:24:01 +01:00
David Woodhouse
28f8f1833b powerpc/pci: Use generic pci_mmap_resource_range()
Commit f719582435 ("PCI: Add pci_mmap_resource_range() and use it for
ARM64") added this generic function with the intent of using it everywhere
and ultimately killing the old arch-specific implementations.

Remove the powerpc-specific pci_mmap_page_range() and use the generic
pci_mmap_resource_range() instead.

Powerpc can mmap I/O port space, so supply the powerpc-specific
pci_iobar_pfn() required to make that work.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-28 16:18:53 -06:00
Ladislav Michl
58a54f03e7 clocksource: timer-ti-dm: Check prescaler value
Invalid value silently disables use of the prescaler.
Use -1 explicitely for that purpose and error out on
invalid value.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 13:41:30 -08:00
Ladislav Michl
ad6e4b6fdc clocksource: timer-ti-dm: Consolidate set source
Reorder omap_dm_timer_set_source internals to get
source verification more straightforward.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 13:41:20 -08:00
Linus Torvalds
3499de32fa Merge tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
 "Fixes for various problems in test output, compile errors, and missing
  configs"

* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: vm: update .gitignore with new test
  selftests: memory-hotplug: silence test command echo
  selftests/futex: Fix line continuation in Makefile
  selftests: memfd: add config fragment for fuse
  selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
  selftests/android: Fix line continuation in Makefile
  selftest/vDSO: fix O=
  selftests: sync: missing CFLAGS while compiling
2018-02-28 13:38:52 -08:00
Ladislav Michl
592ea6bd1f clocksource: timer-ti-dm: Make unexported functions static
As dmtimer no longer exports functions, make those previously
exported static (this requires few functions to be moved around
as their prototypes were deleted).

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-28 13:38:10 -08:00
Jani Nikula
229675d5c0 drm/i915/dp: move link rate arrays where they're used
Localize link rate arrays by moving them to the functions where they're
used. Further clarify the distinction between source and sink
capabilities. Split pre and post Haswell arrays, and get rid of the
array size arithmetics. Use a direct rate value in the paranoia case of
no common rates find.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227105911.4485-1-jani.nikula@intel.com
2018-02-28 23:04:40 +02:00
Sinan Kaya
04875177db PCI/ASPM: Don't warn if already in common clock mode
Previously we emitted a warning if we tried to configure common clock mode
the link was already configured to common clock mode by the UEFI BIOS.
Bail out silently in that case instead of emitting the warning:

  pci 0004:00:00.0: ASPM: Could not configure common clock

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-28 15:00:55 -06:00
Hernán Gonzalez
c33bab622d IB/rxe: Remove unused variable (char *rxe_qp_state_name[])
Note: This is compile only tested as I have no access to the hw.  This
variable was not used anywhere in the code. Removing it saves 24 bytes.

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-24 (-24)
Function                                     old     new   delta
rxe_qp_state_name                             24       -     -24
Total: Before=3348732, After=3348708, chg -0.00%

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:40 -07:00
Hernán Gonzalez
7f566a91b1 IB/qib: Move char *qib_sdma_state_names[] and constify while there.
Note: This is compile only tested as I have no access to the hw.
This variable was not used in qib_sdma.c but in qib_iba7322.c. Declaring it
there, as static, saves 56 bytes.

add/remove: 0/2 grow/shrink: 0/0 up/down: 0/-144 (-144)
Function                                     old     new   delta
qib_sdma_state_names                          56       -     -56
qib_sdma_event_names                          88       -     -88
Total: Before=2874565, After=2874421, chg -0.01%

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:40 -07:00
Hernán Gonzalez
4f1d583432 IB/qib: Remove unused variable (char *qib_sdma_event_names[])
Note: This is compile only tested as I have no access to the hw.

This variable was not used anywhere in the code. Removing it saves 88
bytes.

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-88 (-88)
Function                                     old     new   delta
qib_sdma_event_names                          88       -     -88
Total: Before=2874565, After=2874477, chg -0.00%

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Bart Van Assche
7da09af91d IB/srp: Use %pIS instead of inet_ntop()
Except for a minor log message change, this patch does not change
any functionality. For the introduction of %pIS, see also commit
1067964305 ("lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs]
format specifier").

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Bart Van Assche
c74ff7501e Revert "IB/srp: Avoid that a cable pull can trigger a kernel crash"
The caller of srp_ib_lookup_path() is responsible for holding a reference
on the SCSI host. That means that commit 8a0d18c621 was not necessary.
Hence revert it.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Bart Van Assche
e68088e78d IB/srp: Fix srp_abort()
Before commit e494f6a728 ("[SCSI] improved eh timeout handler") it
did not really matter whether or not abort handlers like srp_abort()
called .scsi_done() when returning another value than SUCCESS. Since
that commit however this matters. Hence only call .scsi_done() when
returning SUCCESS.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Arnd Bergmann
a8ed748708 infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
On 32-bit targets, we otherwise get a warning about an impossible constant
integer expression:

In file included from include/linux/kernel.h:11,
                 from include/linux/interrupt.h:6,
                 from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device':
include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow]
 #define BIT(nr)   (1UL << (nr))
                        ^~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT'
 #define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39)
                                  ^~~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH'
 #define BNXT_RE_MAX_MR_SIZE  BNXT_RE_MAX_MR_SIZE_HIGH
                              ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE'
  ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
                         ^~~~~~~~~~~~~~~~~~~

Fixes: 872f357824 ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Arnd Bergmann
e5d6574ded infiniband: qplib_fp: fix pointer cast
Building for a 32-bit target results in a couple of warnings from casting
between a 32-bit pointer and a 64-bit integer:

drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq':
drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle,
                       ^
drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
            (struct bnxt_qplib_srq *)q_handle,
            ^
In file included from include/linux/byteorder/little_endian.h:5,
                 from arch/arm/include/uapi/asm/byteorder.h:22,
                 from include/asm-generic/bitops/le.h:6,
                 from arch/arm/include/asm/bitops.h:342,
                 from include/linux/bitops.h:38,
                 from include/linux/kernel.h:11,
                 from include/linux/interrupt.h:6,
                 from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq':
include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
 #define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
                                           ^
include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64'
 #define cpu_to_le64 __cpu_to_le64
                     ^~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64'
  req.srq_handle = cpu_to_le64(srq);

Using a uintptr_t as an intermediate works on all architectures.

Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Markus Elfring
c7ec83772a RDMA/iwpm: Delete an error message for a failed memory allocation in iwpm_create_nlmsg()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Markus Elfring
b7c5bc7368 IB/usnic: Delete an error message for a failed memory allocation in usnic_transport_init()
Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28 13:57:39 -07:00
Gustavo A. R. Silva
f51af8a63c PCI/ASPM: Declare threshold_ns as u32, not u64
aspm_calc_l1ss_info() computes l1_2_threshold in microseconds as:

  l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;

where t_common_mode is at most 255us:

  PCI_L1SS_CAP_CM_RESTORE_TIME  0x0000ff00   <-- 8 bits; <256us

and t_power_on is at most 31 * 100us = 3100us:

  PCI_L1SS_CAP_P_PWR_ON_VALUE   0x00f80000   <-- 5 bits; <32
  PCI_L1SS_CAP_P_PWR_ON_SCALE   0x00030000   <-- *2us, *10us, or *100us

So l1_2_threshold is at most 2 + 4 + 255 + 3100 = 3361, which means
threshold_ns is at most 3361 * 1000 = 3361000, which easily fits in a
u32.

Declare threshold_ns as u32, not u64.  This fixes a Coverity warning.

Addresses-Coverity-ID: 1462501
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-02-28 14:39:53 -06:00
Alex Deucher
d869ae092e drm/amdgpu: fix module parameter descriptions
Some were missing the close parens around options.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:38:47 -05:00
Amber Lin
f8f4b9a679 drm/amdgpu: Map all visible VRAM at startup
When using CPU to update page table, we need to kmap all the PDs/PTs after
they are allocated and that requires a TLB shot down on each CPU, which is
quite heavy.

Instead, we map the whole visible VRAM to a kernel address at once. Pages
can be obtained from the offset.

v2: move the mapping base from gmc to amdgpu_mman structure, and the
    implementation in amdgpu_ttm_* functions

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:38:46 -05:00
Shirish S
5d447f09b8 drm/amd/display: check for ipp before calling cursor operations
Currently all cursor related functions are made to all
pipes that are attached to a particular stream.
This is not applicable to pipes that do not have cursor plane
initialised like underlay.
Hence this patch allows cursor related operations on a pipe
only if ipp in available on that particular pipe.

The check is added to set_cursor_position & set_cursor_attribute.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-02-28 15:38:46 -05:00
Shirish S
cc19514113 drm/amd/display: make dm_dp_aux_transfer return payload bytes instead of size
The drm layer expects aux->transfer() to return the payload bytes read.
Currently dm_dp_aux_transfer() returns the payload size which does not
gets updated during the read, hence not giving the right data for the
drm layer to pars edid. This leads to the drm layer to conclude as the
edid is BAD and hence some monitors/devices dont get detected properly.

This patch changes the return type of dm_dp_aux_transfer() to actual
bytes read during DP_AUX_NATIVE_READ & DP_AUX_I2C_READ.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:38:40 -05:00
Shawn Lin
205adda79a PCI: cpqphp: Fix possible NULL pointer dereference
Check io_node for NULL before dereferencing it.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-28 14:35:54 -06:00
Monk Liu
fd430a702d drm/amdgpu: skip ECC for SRIOV in gmc late_init
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:20:22 -05:00
Tom St Denis
82d0ece957 drm/amd/amdgpu: Correct VRAM width for APUs with GMC9
DDR4 has a 64-bit width not 128-bits.  It was reporting
twice the width.  Tested with my Ryzen 2400G.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:19:21 -05:00
Monk Liu
f812dec57d drm/amdgpu: fix&cleanups for wb_clear
fix:
should do right shift on wb before clearing

cleanups:
1,should memset all wb buffer
2,set max wb number to 128 (total 4KB) is big enough

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:19:03 -05:00
Emily Deng
8d333fe0ad drm/amdgpu: Correct sdma_v4 get_wptr(v2)
the original method will change the wptr value in wb.
v2:
furthur cleanup

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:17:57 -05:00
Eric Huang
a0aaa03062 drm/amd/powerplay: fix power over limit on Fiji
power containment disabled only on Fiji and compute
power profile. It violates PCIe spec and may cause power
supply failed. Enabling it will fix the issue, even the
fix will drop performance of some compute tests.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-02-28 15:17:11 -05:00
James Zhu
8014e2d3fd drm/amdgpu:Fixed wrong emit frame size for enc
Emit frame size should match with corresponding function,
uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28 15:16:48 -05:00