Commit graph

27,507 commits

Author SHA1 Message Date
Jamie Lentin
b6114633fb ARM: dts: orion5x: Add description for Netgear WNR854T
This is a router based on the mv88f5181 chipset.

http://www.netgear.com/support/product/WNR854T.aspx
http://wiki.openwrt.org/toh/netgear/wnr854t

[gregory.clement@free-electrons.com:
- extract dt part from "arm: orion5x: Add DT-based support for Netgear
  WNR854T"
- squashed "arm: orion5x: Alias uart0 to serial0 for all orion5x" into
this commit and move serial0 alias from dtsi to dts]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:47:26 +02:00
Linus Walleij
a441b0d093 block: remove remnant refs to hardsect
commit e1defc4ff0
"block: Do away with the notion of hardsect_size"
removed the notion of "hardware sector size" from
the kernel in favor of logical block size, but
references remain in comments and documentation.

Update the remaining sites mentioning hardsect.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-14 08:44:57 -06:00
Jamie Lentin
91762fab30 ARM: dts: arm: orion5x: Add DT include for mv88f5181
Common definitions for the SoC for board definitions to use.

[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:24:38 +02:00
Jamie Lentin
96b5a54528 dt-bindings: arm: add DT binding for Marvell Orion5x SoC family
Copy the format for kirkwood/dove to orion5x

[gregory.clement@free-electrons.com: fix commit title]
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:24:38 +02:00
Baruch Siach
ab48eb5332 dt-binding: mrvl-gpio: remove orion-gpio description
The Orion GPIO controller binding description in mrvl-gpio.txt is obsolete, and
duplicates the description in gpio-mvebu.txt.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-14 16:24:17 +02:00
Craig Gallek
ecb3f394c5 genirq: Expose interrupt information through sysfs
Information about interrupts is exposed via /proc/interrupts, but the
format of that file has changed over kernel versions and differs across
architectures. It also has varying column numbers depending on hardware.

That all makes it hard for tools to parse.

To solve this, expose the information through sysfs so each irq attribute
is in a separate file in a consistent, machine parsable way.

This feature is only available when both CONFIG_SPARSE_IRQ and
CONFIG_SYSFS are enabled.

Examples:
  /sys/kernel/irq/18/actions:	i801_smbus,ehci_hcd:usb1,uhci_hcd:usb7
  /sys/kernel/irq/18/chip_name:	IR-IO-APIC
  /sys/kernel/irq/18/hwirq:		18
  /sys/kernel/irq/18/name:		fasteoi
  /sys/kernel/irq/18/per_cpu_count:	0,0
  /sys/kernel/irq/18/type:		level

  /sys/kernel/irq/25/actions:	ahci0
  /sys/kernel/irq/25/chip_name:	IR-PCI-MSI
  /sys/kernel/irq/25/hwirq:		512000
  /sys/kernel/irq/25/name:		edge
  /sys/kernel/irq/25/per_cpu_count:	29036,0
  /sys/kernel/irq/25/type:		edge

[ tglx: Moved kobject_del() under sparse_irq_lock, massaged code comments
  	and changelog ]

Signed-off-by: Craig Gallek <kraig@google.com>
Cc: David Decotigny <decot@google.com>
Link: http://lkml.kernel.org/r/1473783291-122873-1-git-send-email-kraigatgoog@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-14 15:28:15 +02:00
Li Jun
e5b3253dcc doc: usb: ci-hdrc-usb2: add property over-current-active-high
Adding over-current-active-high to indicate the over current flag
is high active as typically we use active low for over current
polarity.

Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
2016-09-14 10:58:13 +08:00
Li Jun
5de97f8bd7 doc: usb: usbmisc-imx: add imx7d compatible string
Add compatible string for imx7d-usbmisc.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-09-14 10:58:13 +08:00
Alexandre TORGUE
905933af89 pinctrl: Fix "st,syscfg" definition for STM32 pinctrl
"st,syscfg" entry was bad described.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13 23:03:06 +02:00
Arnd Bergmann
292cc1affb Allwinner DT changes for 4.9, take 2
A second set of device tree changes, this time switching a few SoCs to the
 new sunxi-ng clock framework. We also added the support for a new SoC
 (NextThing GR8 and its evaluation board), and the support for the DRM
 driver in the A33.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX1b4yAAoJEBx+YmzsjxAg630P/i4++5Q3TWkkM8x0H375Hu/w
 S2rsA4Tg3979rB8R32yQqquy05ngYB/iKsp+vnx9UDMwPwD7D09+pFm5eQTTpI3o
 L+5O27VhaaFY1G3ZNvyfatw75dk733oA0hYQV4NNQXIzocTrOkFSuAES/LOvdeN5
 T5H4aREySzUBCGkqlq92fz0eSc5l/RDkkxvVjD5Qz2kf7jyWVLlbP96m58cmdKQG
 tiVL+Sn6tDKPumYB8Ab/nt4n7Vni45/D4HAvWQPWxnQD3ImY2d6N0M3bXbttckYU
 XUVhMLczQeuBtyO5XRCRZR2T7dQmqbvNdPGg/R2HTDyMSuUc+RQUE1CcTUxZKsTE
 mhm5UD/qZD2l4sKooNSDqXGplQaExmoJercsTyZ856uPhFY+WwtTh0JgHpSO8hX8
 OC7YVuS4TP4AmBklO39VIMjeA+yDbG5gpkHMH5GFiJG3bDEWUD2NyCgkSn8+CUMF
 QBe5E4tBk5SPoB6LylnVFDyS7BBmqBoBWddYOepAV0QRk/mJCGigIiHExhrd7fAp
 scVvkliScSlUyLhOKJ4vpga3vXLKStEuCEjMsL0hbeaLBSRcXHNDBw70DQx8QJMu
 nBjhyNIF5TdX875IJskd0YSAdLfrjuyuxpecdn+0YyOq9/9Y0SgbPN+vNE3Kj544
 15378EMLv7oCPuFaCPJ5
 =uy/t
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/late

Merge "Allwinner DT changes for 4.9, take 2" from Maxime Ripard:

A second set of device tree changes, this time switching a few SoCs to the
new sunxi-ng clock framework. We also added the support for a new SoC
(NextThing GR8 and its evaluation board), and the support for the DRM
driver in the A33.

To maintain bisectability, while avoiding some un-trivial merge
conflicts, I had to merge the clk branch that I've sent a PR to Mike
and Stephen. This branch will of course be stable.

* tag 'sunxi-dt-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (53 commits)
  ARM: dts: gr8: Add support for the GR8 evaluation board
  ARM: dts: Add NextThing GR8 dtsi
  ARM: dts: sun8i: Move A23/A33 usbphy and usb_otg nodes to common dtsi
  ARM: sun8i: a23/a33: Add RGB666 pins
  ARM: sun8i: a33: Add display pipeline
  ARM: sun8i: Convert the A23 and A33 to the CCU
  ARM: dts: sun6i: switch A31/A31s to new CCU clock bindings
  clk: sunxi-ng: Add hardware dependency
  clk: sunxi-ng: Add A23 CCU
  clk: sunxi-ng: Add A33 CCU support
  clk: sunxi-ng: Add N-class clocks support
  clk: sunxi-ng: mux: Add mux table macro
  clk: sunxi-ng: div: Allow to set a maximum
  clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure
  clk: sunxi-ng: div: Add mux table macros
  devicetree: Add vendor prefix for FriendlyARM
  ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC
  ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllers
  ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC
  ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2
  ...
2016-09-13 17:51:23 +02:00
Arnd Bergmann
327c2c1562 CLCD graphics on the Nomadik NHK15
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX1xA0AAoJEEEQszewGV1z6X4QAMcgpRoBZu1sImOxzslHBO7e
 MAqpbKczZwXVWxBLurQttIlIFL64jccLrmFNQ8Jurxkh/tKBlxNngtj0AlpSCiX8
 qxfHhXymnIR3BRXvbXaGO7ddmPv3BXcThvKEAyKPBV7BBbHpWpBxgKbLiNG+ykrA
 4kiJCtgmbKgUrdj2u5T7U5Ne+fHcspP4HFjzLPoVVapSkG21llOZK/GIj/lVZ63o
 pNIMf95ut/+t9Vw5Wd+lCtAI3L2hYeK5K259mIo97yv1mDXVFuPZGcNFIK7F8UWF
 pM6e3IftHQm/ALDgzBr3r+bI3CXGS8FySDeS5ds/Gwfp48fSkjIDh0R0wVmJZBJj
 7FYGLnTESYQuQrF9D0cPJUemMu/lS2kqvxobiqqgPDoOy+RoWCeTXbhWeiokrVph
 hWXfWm2VdvBsF3I/7/HuhttTekPosZ8XfUliw4XDSAc5Qvbf19AMckGtZ7KFPL8R
 5s5oZBrLT2OADYboeIJgvnGydyym/JEBJ4vCHK6oy447mS/PgQGZh6Kie3eZIVkZ
 wPddp3XQtz2Af2P9PqtpadBWOqn4xHiTUPF+4lrMvruXkURPzdcQdsLyOIKnVDge
 P+Sbt0LHMzh776EdIp7mipQOaz3vlAKXFSW79eV+vwaG7LKbF48TajcjaGl6Ccmu
 tJUB2mgz6LmkLVQnf+Jh
 =C78b
 -----END PGP SIGNATURE-----

Merge tag 'clcd-nomadik' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Pull "CLCD graphics on the Nomadik NHK15" from Linus Walleij:

* tag 'clcd-nomadik' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: add the CLCD LCD display to the NHK15
  ARM: dts: add PMU to the NHK15 device tree
  ARM: nomadik: select MFD_SYSCON
  dt-bindings: Add TPO TPG110 binding
  dt-bindings: add vendor TPO
  ARM: dts: add STMPE PWM to the NHK15 device tree
2016-09-13 17:43:48 +02:00
Arnd Bergmann
4dbacf2cde i.MX device tree changes for 4.9:
- Add SoC support for i.MX7 Solo which is a reduced version of i.MX7
    Dual.
  - New board support: Gateworks Ventana i.MX6Q/DL GW553x, Inverse Path
    i.MX53 USB armory, i.MX6Q/DL TS-4900 from Technologic Systems,
    i.MX6UL GEA M6UL modules from Engicam, i.MX7 Solo Warp7 board.
  - Add DMA and IPU CSI devices for i.MX53 SoC support.
  - Refine i.MX7 Dual SoC DTS as a preparation of i.MX7 Solo support.
  - Use of_graph dt nodes to describe the panel for vf610-colibri and
    ls1021a-twr boards.
  - Add gpio-ranges property to i.MX6 GPIO controllers, which will be
    useful when GPIO driver is changed to request pad configuration as
    GPIO function.
  - Random device additions or small changes for various board support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX1lb5AAoJEFBXWFqHsHzOBI0H/1ynv4DnmCds1eBS8yjqYJnH
 bM02BSwV2gwVQaDljTJCDNoDFMGM3aNjnWge1v4UsfIyDPploMCFi4ympPNsCx3w
 VYB+TRQFG6WHIyd6lHBd+VqeTNgPz+LAhpdrNloZecUUIBlpD8i+8WpDw45ufE7b
 A7jRIaFWnBjMEsUsG/To5PQDI17YwtkRaht2gq+3rwRdk2hbeVlg05JUcwn1+eBB
 DnccJUTy4zZd09W7MRMRM2FejYCququCCfH4is8+1iVLVixwpjEKBHA2w8GatLtn
 e8T+ie/FWIizlnK4Jadba1tcRmW8PlX6UAzgWjGia27G6deHQ1x/0YL9eqDsAP0=
 =CNTd
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree changes for 4.9" from Shawn Guo:

 - Add SoC support for i.MX7 Solo which is a reduced version of i.MX7
   Dual.
 - New board support: Gateworks Ventana i.MX6Q/DL GW553x, Inverse Path
   i.MX53 USB armory, i.MX6Q/DL TS-4900 from Technologic Systems,
   i.MX6UL GEA M6UL modules from Engicam, i.MX7 Solo Warp7 board.
 - Add DMA and IPU CSI devices for i.MX53 SoC support.
 - Refine i.MX7 Dual SoC DTS as a preparation of i.MX7 Solo support.
 - Use of_graph dt nodes to describe the panel for vf610-colibri and
   ls1021a-twr boards.
 - Add gpio-ranges property to i.MX6 GPIO controllers, which will be
   useful when GPIO driver is changed to request pad configuration as
   GPIO function.
 - Random device additions or small changes for various board support.

* tag 'imx-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
  ARM: dts: add gpio-ranges property to iMX GPIO controllers
  ARM: dts: imx35: add iim module to imx35.dtsi
  ARM: dts: vf610-colibri: use of_graph dt nodes to describe the panel
  ARM: dts: ls1021a: Add of_graph dt nodes to describe the panel
  ARM: dts: imx53: add support for USB armory board
  devicetree: Add vendor prefix for Inverse Path
  ARM: dts: imx7s-warp: Add Bluetooth support
  ARM: dts: imx7s-warp: Add User Button support
  ARM: dts: imx7s-warp: Enable I2C2 device support
  ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support
  ARM: dts: imx6ul iomuxc syscon is compatible to imx6q
  ARM: dts: imx7-colibri: add Audio support
  ARM: dts: imx7-colibri: add basic supply regulators
  ARM: dts: imx7-colibri: move SD-card to module level
  ARM: dts: imx6sx: Add GPU bindings
  ARM: dts: imx7s-warp: Let the codec control MCLK pinctrl
  ARM: dts: imx6ul-pico-hobbit: Use WDOG_B pin reset
  ARM: dts: imx6q-bx50v3: configure unused pca953x pins
  ARM: dts: imx6sx: document SION necessity of ENET1_REF_CLK1
  ARM: dts: imx7s-warp: Use WDOG_B pin reset
  ...
2016-09-13 17:42:20 +02:00
Arnd Bergmann
1f480960e0 32bit Rockchip devicetree changes containing two new rk3288 boards (Fennec
and Firefly-reload), display support for the rk3288-evb, support for the
 recently added firmware reboot-flag support and some housekeeping cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJX0WScAAoJEPOmecmc0R2BEycIAK7/5hV5kyeEA3vx1VaLoRH0
 lFHMQyaucbqQCuAu6U6NBwyVGnirvd5HG+KRA34RncLfVT5Fnv81u43byKkaUI/I
 8NH6l4FvcND76J1IIR6XZl8cGxaRCT1bkUgII4MFaMaQBxY19gbLCDuBVLVJEhK7
 lUy7lG/6j/DvIwU0UevGdB/bdCPZ0WZ6n9InF4xIMJ6PJYI5/BctSpxfJr47hTjQ
 a0z637dqXv08L7LRqVtXn+1tJZ6QJdHrtsEavGFOQEzl+n2rRFuBC63+v98h7WCc
 1gnyfWbR+NMZOH13imBiOiK7Ap/F5Qm1uF5bfJhoJGbGazv5NcZqPlZ0CocrAXY=
 =gktZ
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.9" from Heiko Stübner:

32bit Rockchip devicetree changes containing two new rk3288 boards (Fennec
and Firefly-reload), display support for the rk3288-evb, support for the
recently added firmware reboot-flag support and some housekeeping cleanups.

* tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add sensor-supplies on PopMetal-RK3288 board
  ARM: dts: rockchip: fix L3G4200D i2c address on PopMetal-RK3288 board
  ARM: dts: rockchip: enable usbotg for Popemtal-rk3288 board
  ARM: dts: rockchip: add missing regulators for firefly reload board
  ARM: dts: rockchip: remove excess sd properties from firefly reload
  ARM: dts: rockchip: add syscon-reboot-mode DT node
  soc: rockchip: add reboot-mode header
  ARM: dts: rockchip: move rk3288 usbphy under the GRF node
  ARM: dts: rockchip: add rk3288-firefly-reload
  ARM: dts: rockchip: add dts for RK3288-Fennec boards
  ARM: dts: rockchip: add the panel power supply for rk3288-evb board with rk808 pmu
  ARM: dts: rockchip: add the panel power supply for rk3288-evb board with act8846 pmu
  ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb
2016-09-13 17:38:34 +02:00
Arnd Bergmann
d9d37f70fe Allwinner DT changes for 4.9
Business as usual on our side, with a mix of new boards and new IPs enabled
 on boards:
   - Support for the GPIO found on the AXP PMIC
   - ESP8089 on the relevant boards
   - More boards converted to the reference design and q8 designs
   - New boards: Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange
     Pi Lite, Olimex A33-Olinuxino, Empire Electronix M712, inet-d978_rev2,
     Nano Pi Neo
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX0G1eAAoJEBx+YmzsjxAglB8P/j3Z9WDnNVh5MFuvJpPvT5Sc
 E4KiVmL5L5cHRAdJLS3sUTBCHzhv3iJZaHHmPVzRpDYwYL+XMieNpS7CknkD8Sct
 h5LtPk4ukazsrx86TEeBQ1CCBkI2CqXVnD/v68FY8rbIKGPOk52lUrI3lhbuHT1w
 XCSJj4SAMnHfmQWYE+eQpEYndWnMQCijdr3X2OuWl7WG+N+7d0h43QfA2GgR4Thv
 jP/s43LBgMf+GnVLn8hMgI2XZCv/TK+9ZWiDrDDNRS1dwlDrkcKfS+gMOM0sMzON
 tOs3OK4pLB37SQ4+7V3x8Vne7xWVmPXCr8gVYh1AZGLCpSGDNImNVDv9lvNiJiya
 PxbAgGx5eEJ1J4oZ9httT0vp4IGmGew1ZeRIij35+bOECAvNJ09bjMFguaVv3Mv5
 6vKXmbqW2j07TrneKZJMP5L9vheto1Z5AwWDAYDCmxHnkzXCyFNJ5oeo+lvg6EV5
 YWme3WdmLZtcLDIuffa1mlZ5CrtkV+QPdv/SqE/LBhXTSWiPwTaQaqlr57/+/e4Y
 fu2ECKBOP7Y3tanBHHJOMovX8rQ259TadmGOZWDh4bR/9CJ6J/OUWmYwvutBwVOc
 n17g3erYtNQm6/buGpqFTRsT9/EL5zQESJt2x2/DZwOOUipBRkm23Jd0kz/q7juw
 APAzF3rtbo20wld0ueMF
 =3Q+E
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Pull "Allwinner DT changes for 4.9" from Maxime Ripard:

Business as usual on our side, with a mix of new boards and new IPs enabled
on boards:
  - Support for the GPIO found on the AXP PMIC
  - ESP8089 on the relevant boards
  - More boards converted to the reference design and q8 designs
  - New boards: Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange
    Pi Lite, Olimex A33-Olinuxino, Empire Electronix M712, inet-d978_rev2,
    Nano Pi Neo

* tag 'sunxi-dt-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (31 commits)
  devicetree: Add vendor prefix for FriendlyARM
  ARM: dts: sun8i: Add dts file for the NanoPi NEO SBC
  ARM: dts: sun8i-q8-common: Add support for SDIO wifi controllers
  ARM: dts: sun8i: Add dts file for the Orange Pi Plus2E SBC
  ARM: dts: sun8i: Orange Pi Plus dts is for the Plus and Plus 2
  ARM: dts: sun8i: Add PWM controller node in H3
  ARM: dts: sun8i: Add dts file for inet-d978_rev2 tablets
  ARM: dts: sun9i: Add missing #interrupt-cells to R_PIO pinctrl device node
  ARM: dts: sun8i: Rename reference-design-tablet touchscreen node
  ARM: dts: sun5i: Add dts file for the Empire Electronix M712 tablet
  ARM: dts: sun5i: Convert inet-98v-rev2 dts to use reference-design-tablet.dtsi
  ARM: dts: sun4i: Disable ohci1 on ba10-tv-box
  ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2809
  ARM: dts: sun8i: Add dt node for esp8089 wifi chip on polaroid-mid2407
  ARM: dts: sun8i: add NAND controller node for A23/A33
  ARM: dts: sun6i: Add new dts file for tablets using the inet-q972 PCB
  ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi
  ARM: dts: sun6i: colorfly-e708-q1: Remove unused mma8452_int_e708_q1 node
  ARM: dts: sun9i: Switch to the AC100 RTC clock outputs for osc32k
  ARM: dts: sun9i: cubieboard4: Add device node for AC100
  ...
2016-09-13 17:36:04 +02:00
Arnd Bergmann
a6023d0500 Second Round of Renesas ARM Based SoC DT Updates for v4.9
Fixes (for v4.9):
 * Correct PWM clock parent on r8a7794 SoC
 
 Clean-up:
 * Remove obsolete vsp1 properties from r8a779[01] SoCs
 
 New boards:
 * Add r8a7792/wheat and r7s72100/rskrza1 boards
 
 Enablement:
 * Enable LEDs, DU, SDHI on r8a7792/blanche board
 * Enable MMCIF and SDHI on r8a7794/alt board
 * Add SPI and VSP1 to r8a7792 SoC
 * Add ethernet to r7s72100 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXz8W+AAoJENfPZGlqN0++ITIP/ixpSZTzr3XZBbFEgJX73+XM
 plE74Udaeoy1BBsehm97lsB+PNSnkdbWNZtH+WGGlsiS1UCMFMmKiabwTcvaO4cV
 ORtYY53MsvRI5RUU81K8zag+jIXVhhL8k4MgvMzXWTck80ZXl6GB8FBStUYQed9G
 WYc15Qzwep5k9b3joE8ShKE7T+uy/iunIHxKu63ykOKIOvDBZB7BKyys8Sm6fX0s
 dp7psg6g9mEniNxCMISLgz1IDEaAWBY/UnZFBsCJt5CwWbE/omg5FrqefeDyieck
 vK0rp2B9BNsWMX1rE7lHqmuszQNZhISJwOV7xn+VBwhTYGMQ9gHcIFQd14Uie3dK
 oiDdY3Fbe/CIHGH8sk4A7LAWbIsVkHe2K6shiJd8zEE7Dw3ju5ZC0f7jcROav54Z
 VJc5F7iV7Jr37635JdpBgVc0e4n4WsOgyoFnohxaWOLnpROx83BPadYtszmusmiD
 tcpWvUQGjMyl0j1G5RfJQJsLmTq4SNaHO5jgCf2Hm/iMKTXeZla68DlT4qO2Fgj3
 G9Yi6+GBixTa/qTn0WmF5f9YUq8ljmD37ikH9MFLvtM8eYoaTezIkEmJHaOYVq00
 jSbYHdPvj2C/8B9JYars4H+B75Xaapkxf17O75Rg/rhDPAqVoWp0MtaQPpu9qXY0
 RHDl0QtcSQDaGiNJ6ncF
 =mvDC
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.9" from Simon Horman:

Fixes (for v4.9):
* Correct PWM clock parent on r8a7794 SoC

Clean-up:
* Remove obsolete vsp1 properties from r8a779[01] SoCs

New boards:
* Add r8a7792/wheat and r7s72100/rskrza1 boards

Enablement:
* Enable LEDs, DU, SDHI on r8a7792/blanche board
* Enable MMCIF and SDHI on r8a7794/alt board
* Add SPI and VSP1 to r8a7792 SoC
* Add ethernet to r7s72100 SoC

* tag 'renesas-dt2-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
  ARM: dts: wheat: add support for tactile switches
  ARM: dts: wheat: add QSPI support
  ARM: dts: r8a7792: add QSPI support
  ARM: dts: r8a7792: add QSPI clock
  ARM: dts: wheat: add SDHI0 support
  ARM: dts: wheat: add CAN support
  ARM: dts: r8a7794: fix PWM clock parent
  ARM: dts: rskrza1: add ethernet DT support
  ARM: dts: r7s72100: add ethernet to device tree
  ARM: dts: r7s72100: add ethernet clock to device tree
  ARM: dts: rskrza1: initial device tree
  ARM: dts: Add RSKRZA1 DT bindings documentation
  ARM: dts: wheat: add Ethernet support
  ARM: dts: wheat: initial device tree
  ARM: dts: document Wheat board
  ARM: dts: blanche: add support for general purpose LEDs
  ARM: dts: r8a7792: add VSP1V support
  ARM: dts: r8a7792: add VSP1V clocks
  ARM: dts: blanche: add DU support
  ARM: dts: blanche: add SDHI0 support
  ...
2016-09-13 17:34:49 +02:00
Arnd Bergmann
72f61d2e92 mvebu dt for 4.9 (part 1)
- update for Armada XP/38x allowing using direct access SPI
 - various improvement for Armada 39x platforms
 - add pinctrl information for NANd on Armada 38x
 - fix the kirkwood based Openblock A6 external GPIO pins
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlfMQ0gACgkQCwYYjhRyO9XZQgCfVtygCoGhhk2ou4huuBcWlutL
 It0An1jM4iRF4RwgWtikxEV00Ovg4dJw
 =LoDw
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu dt for 4.9 (part 1)" from Gregory CLEMENT:

- update for Armada XP/38x allowing using direct access SPI
- various improvement for Armada 39x platforms
- add pinctrl information for NANd on Armada 38x
- fix the kirkwood based Openblock A6 external GPIO pins

* tag 'mvebu-dt-4.9-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: fix reference to a390 spi controller
  ARM: dts: armada-38x: Add NAND pinctrl information
  ARM: dts: kirkwood: Fix Openblock A6 external GPIO pins
  ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP Board
  ARM: dts: mvebu: armada-390-db: add support for the Armada 390 DB board
  ARM: dts: mvebu: armada-398-db: enable supported usb interfaces
  ARM: dts: mvebu: armada-398: update the dtsi about missing interfaces
  ARM: dts: mvebu: armada-395: add support for the Armada 395 SoC family
  ARM: dts: mvebu: armada-39x: enable rtc for all Armada-39x SoCs
  ARM: dts: mvebu: armada-39x: add missing nodes describing GPIO's
  ARM: dts: mvebu: armada-39x: enable watchdog for all Armada-39x SoCs
  ARM: dts: mvebu: armada-39x: enable the thermal sensor in Armada-39x SoCs
  ARM: dts: mvebu: armada-39x: enable PMU, CA9 SoC Controller and Coherency fabric
  ARM: dts: mvebu: armada-39x: update the SDHCI node on Armada 39x
  ARM: dts: mvebu: armada-390: add missing compatibility string and bracket
  ARM: dts: mvebu: a385-db-ap: add default partition description for NAND
  ARM: dts: mvebu: a385-db-ap: enable USB (orion-ehci) port
  ARM: dts: mvebu: armada-370-xp: Add MBus mappings for all SPI devices
  ARM: dts: mvebu: A37x/XP/38x/39x: Move SPI controller nodes into 'soc' node
  ARM: dts: mvebu: Add SPI1 pinctrl defines for Armada XP
2016-09-13 17:31:16 +02:00
Arnd Bergmann
9992f21333 Qualcomm Device Tree Changes for v4.9
* Rework dr_mode on APQ8064 and Nexus7
 * Add MSM8974 BLSP1 UART1 port
 * Add AP148 SATA mapping
 * Add support for LG Nexus 5 (Hammerhead)
 * Fixup MSM8660/MSM8064 SPMI/MPP IRQs
 * Add Nexus7 IMEM/reboot reason
 * Add Honami touchscreen support
 * Add TSENS support on MSM8974, APQ8064, and APQ8084
 * Add APQ8060 Dragonboard PM8058 LEDs
 * Rework VPH PWR REG for MSM8974
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXycmZAAoJEFKiBbHx2RXV9xwQAJIkqjV4c9x7H6MAkfI1TyxE
 KfnkTbSRDwddvwoE8+Q7jlDcOi8CTw0mf6lkLX5O66GzP0xop0k5YQfGEGnOs3Ct
 5ikS7n55+6NE2PvF0HY4th1Lca0z6FSr48OONAXOuzwXsVoGv8MmKQKW8tLgdI3v
 cYnVfUgqU5JI1m3jhmYzn57bak8KktYUyt4RXjs+iIb1aYx1ol/PNp4Wp/87dpy3
 7B3lmVYp1Dp8P5d52jLjEV8m5pLEmn92YfaksLRTLeLwiwYwR8vfdR/sTnTVxa2/
 tOo0sXhPtsdq/jCu19z31eME5ucGlsqxOHg38TElgFDvztaz7KHwxOnQ/BgGYPmI
 niZEZty1uocAPULrxWOjuGSqaDhIWj1qmmxUGn8Si7MIlK+61ypCuJ9StC46PLjy
 uCnG64PibPEnikdM6pLT2qi6huz/O/8qR/HgGpEwHrRlzM5I88c5QljfPcgrTeNU
 P+D81RgK3/xyYOcZRsXb4imMtph/UwljK3/oa8gZYi50yRiT69zzRXMZeVTbLaiF
 zQJULk3h+4OXmUOzjnWzFZYxejVQ69uuSlnGt/OoD8zuD53R1v2PUE9U8tuh5iSY
 n28gJfz+wLbFBofbGwdujB1D9VTrHmSMcgbdmOpn56y3DB4LbKuyINhVXqMhHJuI
 HbeEj3o7J8HY1w37HW8K
 =hUYu
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Pull "Qualcomm Device Tree Changes for v4.9" from Andy Gross:

* Rework dr_mode on APQ8064 and Nexus7
* Add MSM8974 BLSP1 UART1 port
* Add AP148 SATA mapping
* Add support for LG Nexus 5 (Hammerhead)
* Fixup MSM8660/MSM8064 SPMI/MPP IRQs
* Add Nexus7 IMEM/reboot reason
* Add Honami touchscreen support
* Add TSENS support on MSM8974, APQ8064, and APQ8084
* Add APQ8060 Dragonboard PM8058 LEDs
* Rework VPH PWR REG for MSM8974

* tag 'qcom-dts-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974
  ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg
  ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard
  arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
  arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
  arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
  ARM: dts: msm8974: honami: Add touchscreen
  device-tree: nexus7: Add IMEM syscon and reboot reason support
  ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs
  ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs
  ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes
  ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead
  ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone
  ipq8064: dts: force AP148 SATA port mapping
  ARM: dts: msm8974: Add nodes for blsp1_uart1 serial port
  device-tree: aqp8064.dtsi: Remove usb phy dr_mode = "host"
  device-tree: nexus7: Set phy mode to otg instead of host
2016-09-13 17:29:08 +02:00
Greg Kroah-Hartman
4d719209be Update extcon for 4.9
Detailed description for this pull request:
 1. Support the extcon property and add the synchronization APIs.
 - This feature supports the extcon property for external connector
   because each external connector might have the property according to
   the H/W design.
 
 - The property name should keep the following style.
   : EXTCON_PROP_USB_[property_name]
   : EXTCON_PROP_CHG_[property_name]
   : EXTCON_PROP_JACK_[property_name]
   : EXTCON_PROP_DISP_[property_name]
 
 - Add the new extcon APIs to support the extcon property.
   : extcon_set_property()
   : extcon_get_property()
   : extcon_set_property_capability()
   : extcon_get_property_capability()
 
 - Add the new synchronization extcon APIs.
   : This feature adds the synchronization extcon APIs to support the noti
   for both state and property. When extcon_*_sync() functions is called,
   the extcon informs the information from extcon provider to extcon client.
 
   The extcon driver may need to change the both state and multiple properties
   at the same time. After setting the data of a external connector,
   the extcon send the notification to client driver with the extcon_*_sync().
 
   : extcon_sync()
   : extcon_set_state_sync()
   : extcon_set_property_sync()
 
 - Change the name of existing APIs.
   : extcon_set_cable_state_() -> extcon_set_cable()
   : extcon_get_cable_state_() -> extcon_get_cable()
 
 2. Add the extcon type to group the connector into five category.
 - EXTCON_TYPE_USB  : USB connector
 - EXTCON_TYPE_CHG  : Charger connector
 - EXTCON_TYPE_JACK : Jack connector
 - EXTCON_TYPE_DISP : Display connector
 - EXTCON_TYPE_MISC : Miscellaneous connector
 
 3. Add the new property for external connector.
 - EXTCON_PROP_USB_VBUS
 - EXTCON_PROP_USB_TYPEC_POLARITY
 - EXTCON_PROP_USB_SS   (SuperSpeed)
 - EXTCON_PROP_DISP_HPD (Hot Plug Detect)
 
 4. Add the new type of external connector.
 - EXTCON_DISP_DP  : Display Port
 - EXTCON_DISP_HMD : Head Mounted Device
 - EXTCON_CHG_WPT  : Wireless Power Transfer device
 
 5. Add the new extcon driver.
 - Qualcomm SPMI PMIC USB id detection driver detects whether
   EXTCON_USB_HOST is attached or detached. (extcon-qcom-spmi-mis.c)
 
 6. Remove the usage of extcon_update_state() and old extcon_set_state()
 - Both extcon_update_state() and extcon_set_state() should change the state
   of all external connectors with bit masking handling. It may occur the
   problem. Instead, extcon provides the extcon_set/get_state() functions.
 
 7. Fix the minor issues on extcon drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX15NdAAoJEJzN3yze689THBUP/jnchjajptYuKY/Y/TkDfdHF
 ffEQX/V4lJ1rZfQe4TOWf/f4Pa/+AssFXlOH08in9mAqphsYVZb6d05yVxZgK2cA
 3C0JH2SigpcnpIbxDAmz+IuJCzA9BIyhj3+qqzo72vRE8lS+CBQk0jsuQgbNVRG+
 T9Dg7GvqcWOpvlGXFhMszznYMQIXfnYSuY4JbT5YjEN6k7qC+fYPwyXN7iJfZ70r
 B9mQwjynimE82VV7xfeYwUhoXCSu+MS8YlfxayWP7p8//kNyID17LjCZttH/deF4
 bMr+PfUmn3Uv8PoOQL+hONRruVNbzp8fPaBERk1G/7CS9Gtf1jZUHYyG4Hn7cmpt
 i/WAvFc2aDJyZEzVRborbnZ4KAwas8ftfNy13fIzsXKwPg6FKoIGoj8+4cxO61fc
 rP+GDWpCOheCMLI9oRuXM1Ub6f8z5uZl3xDgWuGb2LCp7uquIC483AaZAKqpPNll
 Xo4oLFTWecyA0lt1FsHC/qTbSW104VtYeQv644zsDTMyVvarQ4daf9lce9Qw5dYc
 jM2EN8CYHw38jpgFquNXqRArNoTbdsLWQ9shv6MlQNguX8hao6lZZgFtWYq9j3dj
 I1YjkyyYyr5VwF+xUjTQFrLWXPZ77/7LRwgeifcIPI3MC+tYFhhBojIT709ri8L/
 QwgUF2ukSoPxPVT/jUVv
 =LF4N
 -----END PGP SIGNATURE-----

Merge tag 'extcon-next-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-testing

Chanwoo writes:

Update extcon for 4.9

Detailed description for this pull request:
1. Support the extcon property and add the synchronization APIs.
- This feature supports the extcon property for external connector
  because each external connector might have the property according to
  the H/W design.

- The property name should keep the following style.
  : EXTCON_PROP_USB_[property_name]
  : EXTCON_PROP_CHG_[property_name]
  : EXTCON_PROP_JACK_[property_name]
  : EXTCON_PROP_DISP_[property_name]

- Add the new extcon APIs to support the extcon property.
  : extcon_set_property()
  : extcon_get_property()
  : extcon_set_property_capability()
  : extcon_get_property_capability()

- Add the new synchronization extcon APIs.
  : This feature adds the synchronization extcon APIs to support the noti
  for both state and property. When extcon_*_sync() functions is called,
  the extcon informs the information from extcon provider to extcon client.

  The extcon driver may need to change the both state and multiple properties
  at the same time. After setting the data of a external connector,
  the extcon send the notification to client driver with the extcon_*_sync().

  : extcon_sync()
  : extcon_set_state_sync()
  : extcon_set_property_sync()

- Change the name of existing APIs.
  : extcon_set_cable_state_() -> extcon_set_cable()
  : extcon_get_cable_state_() -> extcon_get_cable()

2. Add the extcon type to group the connector into five category.
- EXTCON_TYPE_USB  : USB connector
- EXTCON_TYPE_CHG  : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector

3. Add the new property for external connector.
- EXTCON_PROP_USB_VBUS
- EXTCON_PROP_USB_TYPEC_POLARITY
- EXTCON_PROP_USB_SS   (SuperSpeed)
- EXTCON_PROP_DISP_HPD (Hot Plug Detect)

4. Add the new type of external connector.
- EXTCON_DISP_DP  : Display Port
- EXTCON_DISP_HMD : Head Mounted Device
- EXTCON_CHG_WPT  : Wireless Power Transfer device

5. Add the new extcon driver.
- Qualcomm SPMI PMIC USB id detection driver detects whether
  EXTCON_USB_HOST is attached or detached. (extcon-qcom-spmi-mis.c)

6. Remove the usage of extcon_update_state() and old extcon_set_state()
- Both extcon_update_state() and extcon_set_state() should change the state
  of all external connectors with bit masking handling. It may occur the
  problem. Instead, extcon provides the extcon_set/get_state() functions.

7. Fix the minor issues on extcon drivers.
2016-09-13 17:17:31 +02:00
Arnd Bergmann
3abb0c6cdc DTS related changes for omaps for v4.9 merge window:
- Update elm phandle for am335x
 
 - Fix overo NAND gpmc ranges, this has always been broken so it can
   wait for the merge window
 
 - Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
   as it's been using the older configration since the dts got added
 
 - A series of dtc warning fixes for unit names
 
 - Keep dcdc3, 5 and 6 enabled during suspend on am347x boards
 
 - Disable DDR regulator during rtc-only/poweroff mode for am437x boards
 
 - Remove redundant regulator compatibles for am437x boards
 
 - Increas QSPI max frequency for dra7 boards
 
 - Enable QSPI for am57xx-idk-common
 
 - Enable am335x-wega audio support
 
 - Workaround for i845 for dra7
 
 - Update binding for logicpd boards
 
 - Add gpio-decoder nodes for am335x-icev2 board
 
 - Add linux,pci-domain property for dra7
 
 - Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
   entries, these can wait for merge window as Ethernet works on dra7
 
 - A series of changes to drop skeleton.dtsi because of dtc warnings
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJXyErxERx0b255QGF0b21pZGUuY29tAAoJEBvUPslcq6VzEU0Q
 ALfYnZ2/cNZ8ZkQ0jDLSxAOgb6SrXM5L6iUIYCyVuO6JP+lU88Zn0iQlB1wcD+e8
 Gx87pnexDmPHznwrwWDyXqP6U89vJM9eBdUHoGIt8fr0On7DGQXAN1yrHN+N2kxa
 y7DDePdu1InQM0oXeVqrKdSDNwnCMJpsdHOjmlB1bH83arrMOsG1bZZG3b5LgSTT
 zJss1l3ipw2YJhkGheHCai6bClrko9z8OcbmSF4qogMDs19+QiC9AZ2lIwAF8czG
 ll+/0Mwb9v0K4R/u+KZ9wC8tjz+Skitt0ffDSBpmP7ZBVJRRr5s3PxYDH6vSs+tM
 zVNH2jy1SvnSpxJ3lpIis1WzMi2hr9X9iM3qTzRX5JE+wBGuas1CDVy5duQXtb4d
 QRZWeHdQAX+x5MIRuVgYks6uDPHd6J6uXTlLNjASw5MRDSAGqnYv65BxYc+v5wyW
 v0kj+yQk9ewiwIL3z0T4mJg04mO/hFh+G/B868Un/uafuxvoxEGH1TaSEz3j1Ow3
 o1OGkxVWJj4N/tc7EP1EIqjFid6wAeu1eJdFkqv3zJjphOfKhToFg2T/5bUjbrFD
 mlRyx3aOBxwbrkTUcSC5Qxy/q9DFT7kYm4RESk03zID2QTJmcTpwqNaYX6/jmVFT
 xK7mWB4kyTkl/wC+/XJgLztsm79cDY0cWLDQd0zskyqU
 =k+4W
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "DTS related changes for omaps for v4.9 merge window" from Tony Lindgren:

- Update elm phandle for am335x

- Fix overo NAND gpmc ranges, this has always been broken so it can
  wait for the merge window

- Fix NAND and use NAND ready pin for logicpd gpmc, this can wait too
  as it's been using the older configration since the dts got added

- A series of dtc warning fixes for unit names

- Keep dcdc3, 5 and 6 enabled during suspend on am347x boards

- Disable DDR regulator during rtc-only/poweroff mode for am437x boards

- Remove redundant regulator compatibles for am437x boards

- Increas QSPI max frequency for dra7 boards

- Enable QSPI for am57xx-idk-common

- Enable am335x-wega audio support

- Workaround for i845 for dra7

- Update binding for logicpd boards

- Add gpio-decoder nodes for am335x-icev2 board

- Add linux,pci-domain property for dra7

- Fix dra7 clock data gmac_gmii_ref_clk_div and related clock tree
  entries, these can wait for merge window as Ethernet works on dra7

- A series of changes to drop skeleton.dtsi because of dtc warnings

* tag 'omap-for-v4.9/dt-pt1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (54 commits)
  ARM: dts: dra7: Add missing unit name to memory nodes
  ARM: dts: dra62x: Add missing unit name to memory nodes
  ARM: dts: dm8168: Add missing unit name to memory nodes
  ARM: dts: dm8148: Add missing unit name to memory nodes
  ARM: dts: am572x: Add missing unit name to memory nodes
  ARM: dts: am4372: Add missing unit name to memory nodes
  ARM: dts: am3517: Add missing unit name to memory nodes
  ARM: dts: am335x: Add missing unit name to memory nodes
  ARM: dts: omap5: Add missing unit name to memory nodes
  ARM: dts: omap4: Add missing unit name to memory nodes
  ARM: dts: omap3: Add missing unit name to memory nodes
  ARM: dts: omap2: Add missing unit name to memory nodes
  ARM: dts: am4372: Remove skeleton.dtsi usage
  ARM: dts: dra7: Remove skeleton.dtsi usage
  ARM: dts: dm816x: Remove skeleton.dtsi usage
  ARM: dts: dm814x: Remove skeleton.dtsi usage
  ARM: dts: am33xx: Remove skeleton.dtsi usage
  ARM: dts: omap5: Remove skeleton.dtsi usage
  ARM: dts: omap4: Remove skeleton.dtsi usage
  ARM: dts: omap3: Remove skeleton.dtsi usage
  ...
2016-09-13 16:27:42 +02:00
Arnd Bergmann
6f7f9e4418 Samsung DeviceTree update for v4.9:
1. Set chosen serial bitrate which allows proper serial output when
    bootloader does pass all the data in command line.
 2. Cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXxUu4AAoJEME3ZuaGi4PXvHEP/jtgqI3x2AKqSeHZ67JVetvV
 9mmRFcyOHavz7D0kutUnKxuHMAM6j/0CBVVJblbDrDz1MTtQc2O1q6aCqambwi8y
 RW9Uckbn0WtA3VNKp+FlIe3nB7VBpBYwwdjCx9az5Z7SAO4S2eMKg3HAPNJPjphd
 Dhu27NpwQlFOvmKkVvKRpJtXbLRL77ustSbQEGeKyVuT1flzKXe8rkwJI642V1Ur
 lCcgIv8Hf5L5kREg9qvbRMVpFk5hIDTLIuPz9ToM5H3hjU7jGHz2DiAx/Ec9K5GJ
 RihGgVFE4pQxQil9mlF8SDc8D326zgs760f8TbqVpdf1uT6FvbSWm75IbkZAlXZ3
 Pyq5j+2Trx5fA3phi7L0Jz8yq04tXBRbHC15bTXE2X9d8l/djZopTtLCAUZkewFd
 Mv2UicPMGDwkA5/QMvz38U2rhiAiNTgSBvj9Py5DmpyIfuwbJr+xZkKDedX5Vvc7
 bDOPOg/+XOA6AOcmsK1Fsu2i9M6SZL9MuRtKq9hMsGmuZ8OB1TFqWiAHy/AusG2r
 +/mKjXV2Xi/zF8tVJhfgKDNF+k9vsUT2v91TLH3gKO7FXEpdvXSoh5fCfid9GiSC
 QznTz+t62e4r1utMzl37hf2lDtxOKH9/7xNM/1O2wPhVgw9pWP+slYqZLYNkSaLB
 1PA1vrrYEGZ9grucSYE8
 =8Yu8
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Merge "Samsung DeviceTree update for v4.9" from Krzysztof Kozlowski:

1. Set chosen serial bitrate which allows proper serial output when
   bootloader does pass all the data in command line.
2. Cleanup.

* tag 'samsung-dt-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'
  ARM: dts: exynos: Use stdout non-deprecated property and add serial options to Odroid XU/XU3/XU4
2016-09-13 16:09:10 +02:00
Chen-Yu Tsai
204ae2963e mfd: axp20x: Add bindings for AXP806 PMIC
This patch adds the basic and regulator bindings for the X-Powers AXP806
PMIC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-13 14:09:59 +01:00
Linus Walleij
eb8994172a Linux 4.8-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXsSTlAAoJEHm+PkMAQRiGZaYH/1MarD897Cju7AgQj8UYQYXB
 dsG3iuoJMj0ji/V466lmHZnS0pwmpJV3qBp7znaFI5jLoTYD2+BkBDY/FLQLqQH7
 vkRKOCLCbppKkDDsgd3dS3FFOnJC724iqnSsPegp2lz/8OS2dIs8i82PgKX3zQjJ
 PqkcMOEt3YlTV18/LiGvQhXWHJ/x8oIvcO0KuLcz3adX0B15+qZyJo1Ss3Z0HL/V
 CqcSVaLgDe0fAAMCexUcKxRNtvGrMENxYRE9YXJFxu1do2H4opXmt0qGun0yxSN4
 8/Y74BB80yUak8lM4mHMCy2G2lDmB32f188yPN45Hg6+F71UJChXXKUnyzUhx14=
 =QQX1
 -----END PGP SIGNATURE-----

Merge tag 'v4.8-rc2' into devel

Linux 4.8-rc2
2016-09-13 10:31:40 +02:00
Alexandre TORGUE
23fb16194b pinctrl: Add IRQ related DT properties of STM32 pinctrl
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-13 10:10:51 +02:00
Felipe Balbi
b281dc630b usb: dwc3: of-simple: add compatible for Cavium
Add necessary compatible flag for Cavium's DWC3 so
dwc3-of-simple will probe.

Tested-by: Steven J. Hill <Steven.Hill@cavium.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-13 09:28:59 +03:00
Oliver Neukum
050bc4e846 scsi: introduce a quirk for false cache reporting
Some SATA to USB bridges fail to cooperate with some
drives resulting in no cache being present being reported
to the host. That causes the host to skip sending
a command to synchronize caches. That causes data loss
when the drive is powered down.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13 08:08:24 +02:00
Stephen Boyd
38085c987f extcon: Add support for qcom SPMI PMIC USB id detection hardware
Some Qualcomm PMICs have a misc device that performs USB id pin
detection via an interrupt. When the interrupt triggers, we
should read the interrupt line to see if it has gone high or low.
If the interrupt is low then the ID pin is grounded, and if the
interrupt is high then the ID pin is being held high.

Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
[cw00.choi: Edited the driver description and added the author information]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-13 11:26:26 +09:00
Rafael J. Wysocki
e41f323ab0 Both for-rc (4.8-rcX) and for-next (4.9) materials included
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXz9MZAAoJEBOhurvWBoCKUbkP/1MVCoZrt3Zciag9QeZsSAt3
 yEaLZ/ydo8m0TImARM2bU+ZEIy3Wxpdqe2MWSdb10WaI2IrP/LFNPd0473E17ktL
 WFVohunEgaHCMkuMjw55Ec/YstYkBXRPtIfme8jFMM3/Bkinr8IH5tRMpdLmxqVC
 y842odL9AQHEz26hQIPWJUjWXd+DrG9r3VZg+zuOCS8XYQvRsCTRNJ6OLqrySI46
 yn/iSR1i+iLu0n5t1lZAI1KV5ozTZaobKEBXegS46lkExPybCsPL531JQ0XPvfeK
 fQx32RUYEJwJXZPyYu0bcrz+5ktXsQjtvSn2rqkCCfltIg6Q/20PIcqDxX7wh3J5
 iF5fd3pClaWglZ7BWdArTm9fwcLU8Ry0ST8HAy9PzrO0SeWShan3eozYXQWOPWCW
 Ct7V562V7oQXPy23YJocqZSSJ4WAFs3sM/af2koE0YAmg8dqOBOEMvov4rxExZs7
 MT79+86qww/pgAJuIsXh/tDwNUNI92pZG4/qHxW0S6I/1wlITrM+v8GscMBauaMT
 xqbfzsBlsiBW7NgAAKBZgzzxirHi/dAbpJnHpJsMeMV+SSb8BEFc3wYs4gGhzYeW
 NAlL+pkJv327cuuZqBELC4ATw2BpSU7AsOX78NGMsZwYW737YS7n+x7PCC3JRjG5
 HFeO3zeTfieigMpDbHh/
 =ctfr
 -----END PGP SIGNATURE-----

Merge tag 'pull_whole_for_4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq into pm-devfreq

Pull devfreq material for v4.9 from MyungJoo Ham.

* tag 'pull_whole_for_4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
  PM / devfreq: rockchip: add devfreq driver for rk3399 dmc
  Documentation: bindings: add dt documentation for rk3399 dmc
  PM / devfreq: event: support rockchip dfi controller
  Documentation: bindings: add dt documentation for dfi controller
  PM / devfreq: event: remove duplicate devfreq_event_get_drvdata()
  PM / devfreq: fix Kconfig indent style
  PM / devfreq: Add COMPILE_TEST for build coverage
  PM / devfreq: exynos-ppmu: remove unneeded of_node_put()
2016-09-13 02:57:31 +02:00
Dave Airlie
8506912b96 Merge branch 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
This adds the ASoC codec interfaces for TDA998x HDMI audio from
Jyri Sarha.

* 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: dts: am335x-boneblack: Add HDMI audio support
  drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding
  drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata
2016-09-13 10:28:17 +10:00
Dave Airlie
b4eac5465b Allwinner DRM changes for 4.9
This tag adds the support of a new SoC to sun4i-drm (the Allwinner A33),
 and the usual few fixes and enhancements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX1cWUAAoJEBx+YmzsjxAgKfcP/ibcVnQa6dVhjegcMw/2pKow
 0C2BIixZoiXnd1HybIE0wn/TCL15AyluQne6frhrPfgnl8AFSO60ZVHxFNDCCOq+
 qqQvsUARpL0DUc31ThXyCaLRZc9u5KUFyxwX/QA8ut3vHI7wdIr+F1HNJqMG/Drd
 TJ1JqA3/n6Z7cuU8nuIAn0Xl14/pXKZk6HOBvwF3y+J/vi5XadYZPjYlaKFW6NZ0
 4EyLOjLdpjzAeJaSnn9HIuOim2p48S9vo/sdYvjZVJkKUZsSuYewfvGCNyVXrDmN
 sVbGBnieUOUhnR0hDZxWDz9+Jgvgd7ApzfvVDv5TOK6avfHOr0TncYNk05xdHsYz
 XkpNrG8MAMK9h/bzVotZiT/nhEvIU3SPXrnJHbvcm2DXirN4wX3v5svA7OmTp6Rs
 PzeW8/ni0tGrKvKFONcAgpK2y1KlxfZPogfGvX703XFj6Dq6dIwDz1Ar8HgGCq7v
 j+n9PN3t6reMZVZjHKyuSzJJ+hozYQ5aolS76MsIc4/1KNhjTDVL53krTdA24iA7
 Zrk6xpUbgnYsXOrqsRJ2Luq1aXP6KwKWjZxxF2k/jZUcMZ5HO6X6oIAOimimHabl
 rjesEhn17MIuBB5SfgXAReIVNDE1oWTIrLGjTOPVLG9WYKYJC2a6KafBpWm9TP+Q
 gO5xAJ3VsqMD209ZDlXD
 =532q
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next

Allwinner DRM changes for 4.9

This tag adds the support of a new SoC to sun4i-drm (the Allwinner A33),
and the usual few fixes and enhancements

* tag 'sunxi-drm-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drm/sun4i: add missing header dependencies
  drm/sun4i: Add a DRC driver
  drm/sun4i: backend: Handle the SAT
  drm/sun4i: support A33 tcon
  drm/sun4i: support TCONs without channel 1
  drm/sun4i: Clear encoder->bridge if a bridge is not found
  drm/sun4i: rgb: add missing calls to drm_panel_{prepare,unprepare}
  drm/sun4i: Remove redundant dev_err call in sun4i_tcon_init_regmap()
  drm/sun4i: Add bridge support
  drm/sun4i: Move panel retrieval in RGB connector
  drm/sun4i: Store TCON's device structure pointer
2016-09-13 10:24:52 +10:00
Dave Airlie
1f8ee720ce Merge tag 'topic/drm-misc-2016-09-08' of git://anongit.freedesktop.org/drm-intel into drm-next
* tag 'topic/drm-misc-2016-09-08' of git://anongit.freedesktop.org/drm-intel:
  drm: Fix error path in drm_mode_page_flip_ioctl()
  Revert "drm: Unify handling of blob and object properties"
  drm/udl: implement usb_driver suspend/resume.
  drm: fix signed integer overflow
  drm/atomic: Reject properties not part of the object.
  drm/doc: Add a few words on validation with IGT
2016-09-13 10:19:38 +10:00
David S. Miller
b20b378d49 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/mediatek/mtk_eth_soc.c
	drivers/net/ethernet/qlogic/qed/qed_dcbx.c
	drivers/net/phy/Kconfig

All conflicts were cases of overlapping commits.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12 15:52:44 -07:00
Neil Armstrong
164c5cd5ff spi: meson: Add GXBB Compatible string
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:11:20 +01:00
Stephen Warren
d4b8e2c5b0 dt: net: enhance DWC EQoS binding to support Tegra186
The Synopsys DWC EQoS is a configurable IP block which supports multiple
options for bus type, clocking and reset structure, and feature list.
Extend the DT binding to define a "compatible value" for the configuration
contained in NVIDIA's Tegra186 SoC, and define some new properties and
list property entries required by that configuration.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-09-12 08:38:03 -05:00
Lee Jones
981b178964 dt-bindings: mmc: sdhci-st: Mention the discretionary "icn" clock
The interconnect (ICN) clock is required for functional working of
MMC on some ST platforms.  When not supplied it can result in
broken MMC and the following output:

        [   13.916949] mmc0: Timeout waiting for hardware interrupt.
        [   13.922349] sdhci: =========== REGISTER DUMP (mmc0)===========
        [   13.928175] sdhci: Sys addr: 0x00000000 | Version:  0x00001002
        [   13.933999] sdhci: Blk size: 0x00007040 | Blk cnt:  0x00000001
        [   13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013
        [   13.945650] sdhci: Present:  0x1fff0206 | Host ctl: 0x00000011
        [   13.951475] sdhci: Power:    0x0000000f | Blk gap:  0x00000080
        [   13.957300] sdhci: Wake-up:  0x00000000 | Clock:    0x00003f07
        [   13.963126] sdhci: Timeout:  0x00000004 | Int stat: 0x00000000
        [   13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
        [   13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
        [   13.980602] sdhci: Caps:     0x21ed3281 | Caps_1:   0x00000000
        [   13.986428] sdhci: Cmd:      0x0000063a | Max curr: 0x00000000
        [   13.992252] sdhci: Host ctl2: 0x00000000
        [   13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200
        [   14.001990] sdhci: ===========================================
        [   14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-12 10:31:37 +02:00
Greg Kroah-Hartman
8473054e4d Merge 4.8-rc6 into staging-next
We need the IIO changes in here for future patches to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-12 09:18:04 +02:00
Greg Kroah-Hartman
fc9104d5d7 Merge 4.8-rc6 into usb-next
We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-12 09:15:26 +02:00
Neil Armstrong
2ea3401e2a clocksource/drivers/oxnas: Add OX820 compatible
In order to support the Oxford Semiconductor OX820 SoC, add new
compatible string to rps timer driver.
Also add new string in the dt-bindings.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-09-12 07:28:46 +02:00
Hans de Goede
43ba588346 Input: silead_gsl1680 - document firmware-name, fix implementation
The driver has supported touchscreen-fw-name to specify the firmware to
load since it has been merged, but this was omitted from the dt-binding
documentation.

During review of adding touchscreen-fw-name to the binding documentation
it was brought up that there is a standard property name called
"firmware-name" for this, which should be used.

Since there are no users of touchscreen-fw-name yet, this commit
adds documentation of "firmware-name" to the dt-binding documentation
and switches the driver over to use this.

This commit also makes the driver add a "silead/" prefix to the
firmware name from dt before calling request_firmware. That the
firmware files are stored under /lib/firmware/silead under Linux
is an implementation detail and does not belong in devicetree.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10 10:49:12 -07:00
Marcin Niestroj
722dc54628 Input: tps65218-pwrbutton - add support for tps65217 variant
The power button found in tps65217 device is very similar to the tps65218,
so let's enhance the driver to support both variants.

This driver enables us to use tps65217's power button as KEY_POWER on
am335x boards (directly connected button in chiliboard, accessible pin
via expansion header in beaglebone). This patch has been tested with
chiliboard.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10 10:47:49 -07:00
Linus Torvalds
b8db3714d7 Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "Mostly driver bugfixes, but also a few cleanups which are nice to have
  out of the way"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: Restore clock settings at resume time
  i2c: Spelling s/acknowedge/acknowledge/
  i2c: designware: save the preset value of DW_IC_SDA_HOLD
  Documentation: i2c: slave-interface: add note for driver development
  i2c: mux: demux-pinctrl: run properly with multiple instances
  i2c: bcm-kona: fix inconsistent indenting
  i2c: rcar: use proper device with dma_mapping_error
  i2c: sh_mobile: use proper device with dma_mapping_error
  i2c: mux: demux-pinctrl: invalidate properly when switching fails
2016-09-10 09:43:10 -07:00
Randy Li
0f74ab59ce phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup
It is a hardware bug in RK3288, the only way to solve it is to
reset the phy.

Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 17:31:40 +05:30
Chris Zhong
d83614e45b Documentation: bindings: add dt doc for Rockchip USB Type-C PHY
This patch adds a binding that describes the Rockchip USB Type-C PHY
for rk3399

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:49:02 +05:30
Sekhar Nori
a0ceee5893 dt-bindings: phy: ti: add documentation for ti,dra7x-usb2
Commit 7e472402ca ("phy: omap-usb2: Provide workaround for
USB2PHY false disconnect") added a new binding for USB2 PHYs
on DRA7x. But it has remained undocumented so far.

Add documentation for the binding.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:48:40 +05:30
Yoshihiro Shimoda
800dcc307d phy: rcar-gen3-usb2: Add a compatible string for r8a7796
This driver can support for r8a7796 SoC. So, this patch adds it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:48:38 +05:30
Yoshihiro Shimoda
8cf1ffe985 phy: rcar-gen3-usb2: revise the example of device tree doc
The clocks property should be set to &cpg, not &mstpX_clks.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:48:37 +05:30
Shawn Lin
b11c821532 Documentation: bindings: add dt documentation for Rockchip PCIe PHY
This patch adds a binding that describes the Rockchip PCIe PHY found
on Rockchip SoCs PCIe interface.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:48:32 +05:30
Frank Wang
72580a49a8 Documentation: bindings: add DT documentation for Rockchip USB2PHY
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:48:30 +05:30
Rafał Miłecki
e5666281d9 phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar
Northstar is a family of SoCs used in home routers. They have USB 2.0
and 3.0 controllers with PHYs that need to be properly initialized.
This driver provides PHY init support in a generic way and can be bound
with XHCI controller driver.

There aren't any public datasheets from Broadcom so we can't have nice
defines for all used bits. It means we just follow Broadcom's
initialization procedure using their magic values. We were quite lucky
actually that Broadcom put some comments in their SDK reference code
explaining what given writes are responsible for.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:48:28 +05:30
Icenowy Zheng
732e35da7b dt: bindings: add bindings for Allwinner A64 usb phy
Update sun4i usb phy dt binding documentation to include support for
Allwinner A64 usb phy.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 16:48:26 +05:30
Maxime Ripard
bdc2601b02 Merge branch 'sunxi/clk-for-4.9' into sunxi/dt-for-4.9 2016-09-10 11:45:28 +02:00