Commit graph

27,507 commits

Author SHA1 Message Date
Hans de Goede
132e237757 usb: musb: sunxi: Add support for musb controller in A31 SoC
The A31 SoC uses the same musb controller as found in earlier SoCs, but it
is hooked up slightly different. Its SRAM is private and no longer controlled
through the SRAM controller, and its reset is controlled via a separate
reset controller. This commit adds support for this setup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:20 -05:00
Hans de Goede
744543c599 usb: musb: sunxi: Add support for the Allwinner sunxi musb controller
This is based on initial code to get the Allwinner sunxi musb controller
supported by Chen-Yu Tsai and Roman Byshko.

This adds support for the Allwinner sunxi musb controller in both host only
and otg mode. Peripheral only mode is not supported, as no boards use that.

This has been tested on a cubietruck (A20 SoC) and an UTOO P66 tablet
(A13 SoC) with a variety of devices in host mode and with the g_serial gadget
driver in peripheral mode, plugging otg / host cables in/out a lot of times
in all possible imaginable plug orders.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:20 -05:00
Ivan T. Ivanov
351169933e usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driver
Driver handles PHY initialization, clock management, power
management and workarounds required after resetting the hardware.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-29 09:59:19 -05:00
Christoph Hellwig
4246a0b63b block: add a bi_error field to struct bio
Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29 08:55:15 -06:00
Christian Borntraeger
f2d2eb9d05 KVM: s390: remove outdated documentation
The old Documentation/s390/kvm.txt file is either
outdated or described in Documentation/virtual/kvm/api.txt.
Let's get rid of it.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
2015-07-29 11:02:35 +02:00
Joachim Eastwood
75fee59550 stmmac: remove setup/free glue callbacks
As all dwmac-* drivers have been converted to have a proper probe
function the setup callback can now be removed. Also remove the
free callback that wasn't used by any driver.

New dwmac-* drivers should implement standard probe and remove
functions to preform any needed setup and teardown.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29 00:13:25 -07:00
Joachim Eastwood
0933328a1b stmmac: remove unused stmmac_of_data struct
As dwmac-* drivers that need OF match have been converted
to use their own internal OF match data structure this can
now be removed.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29 00:13:24 -07:00
Lars Persson
5b8b64843a dwc_eth_qos: Add Synopsys DWC Ethernet QoS bindings
Add device tree binding documentation for the Synopsys DWC Ethernet
QoS driver supporting revision 4.10a of the hardware IP.

Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-28 23:55:00 -07:00
Stephen Boyd
19aab27308 Merge branch 'clk-determine-rate-struct' into clk-next
* clk-determine-rate-struct:
  clk: fix some determine_rate implementations
  clk: change clk_ops' ->determine_rate() prototype
2015-07-28 11:51:30 -07:00
Olof Johansson
0c21bcb616 - ARM: mediatek: Add regmap to mediatek Kconfig
- soc: mediatek: Drop owner assignment from platform_driver
 - soc: Mediatek: Add SCPSYS power domain driver
 - dt-bindings: soc: Add documentation for the MediaTek SCPSYS unit
 - soc: mediatek: Add infracfg misc driver support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVt2EHAAoJELQ5Ylss8dNDHA0QAIqW6e/OIKNyJm1ykGEYHqtx
 1fKyQmjRPN1/VEl13UaXOg/Ke2JdeloJr0Yi/0NI0Si/Sy0i1dtnNcUIkgUZ9hYc
 WbeSSydQWoj8+023BsuXy07+xXnnrJbN4XRVcFfAMagKYJhlewVZi6x1avPmrlJC
 8XGck4D1M6qyW9nbdIBr1qx71kunzZQkHJ/bVg0kt/0nYYF+FkrFXEWcGa+Cc8IC
 QbCe1X7GhsVRnEelwcXK6J6k964mhhKhTmdvK5oMJDNvtNF7+KiH3luLJSY4XTlI
 Ao8aBvsNSnAt6qYOoojG1MwohdR/X1vvxhi+hLJ1vV1Znp4wmJmSFyYZKaaiX+/d
 M5/q3Ve3b7kfEPpliqikSYV1X3cC7twEKsER3egvy+NheAdyhQDJUA7HDfKiPT41
 HVWXZB0na7SiNT54cWagGjPH3KNTcttnhhzx1dHrkgT9FD+2HCX5qlqB9E7OEWgD
 kgSh/yHPqc5jyjmqvKhCS87Pq9Usik6n8XsLdn/Kx5eOQhv6sp+y8GP1x1bINXfP
 lwEeBc4tzjHujGsRz6fJRmsvvj+ZvB2bHig+XxnSWz+RXJiRPtHswSb5MimAjrhE
 Eie03qavgV5PW1dmK0+I/DTsi6J6IbxmlE670HGWqRZyoF9cITf8CnjS+b5bgOVO
 qQqnKEUIbnJwjYiSP2Y0
 =sRus
 -----END PGP SIGNATURE-----

Merge tag 'v4.2-next-soc' of https://github.com/mbgg/linux-mediatek into next/soc

- ARM: mediatek: Add regmap to mediatek Kconfig
- soc: mediatek: Drop owner assignment from platform_driver
- soc: Mediatek: Add SCPSYS power domain driver
- dt-bindings: soc: Add documentation for the MediaTek SCPSYS unit
- soc: mediatek: Add infracfg misc driver support

* tag 'v4.2-next-soc' of https://github.com/mbgg/linux-mediatek:
  ARM: mediatek: Add regmap to mediatek Kconfig
  soc: mediatek: Drop owner assignment from platform_driver
  soc: Mediatek: Add SCPSYS power domain driver
  dt-bindings: soc: Add documentation for the MediaTek SCPSYS unit
  soc: mediatek: Add infracfg misc driver support

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 18:17:31 +02:00
Olof Johansson
55e3cfc5f9 - ARM: dts: mediatek: add mt6580 basic support
- Document: DT: Add bindings for mediatek MT6580 SoC Platform
 - ARM: dts: mediatek mt8135: Use real UART clocks
 - ARM: dts: mt8135-evbp1: Add PMIC support
 - ARM: dts: mt8135: Add pmic wrapper nodes
 - ARM: dts: mediatek: Enable clock support for Mediatek MT8135.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVt2IWAAoJELQ5Ylss8dNDIiQQAKiRws9uCGxy9JE5ctn0kmRc
 m7u9juM1pBRWIAPReCWBBATivBtlaCMGM00o92zg3biM9npedy0p9xgakNhM/vPR
 pFq1PZX6IU7qnn3dB7WXYy+JOIOvUTKwTVz87z45HEepQXMIJFx3/x6LnxabxEIq
 LlxMupWb+yG5jiwAor63YOXbQy1AF2Ps2+p6rySYEQZrf5wzteozJWxTHZ5Vr0+p
 KW7u8Cb9d0tTb/AxN9Il/+xTeev5O0M6J8LS8qx95h4RvT5hqPGgiBsYL+jLp9fu
 AC3SjEdO6EQfx/yI2bkOLmtzekhfXSrtcupW6lpcUfhEXjlB6uliw3frxZd/qB+F
 lwHmr3j0gWdEdRn9rnPmNciey8xQRgkPWOLKu2Eu3SUS2fxCHKCaG6tVaKBIun/I
 +rl3lksPYSEiK/jqN5aS2GLna6cX21KxkgaWMhldL7jQOlMzns6C5e+xETuJYgTc
 u35XkkcNZ8KzYwX0NEdd86fMMhMx3YOFrEdZglnOwltSKe2ZCAAJiscfkagAOONj
 Oty3Z9jJTUZ0Xd/jytC54wKGzzhu0MWfqcDC1e2sEb3BuACBMx37f5g37/nG/QEV
 cK+ITf2o8KmUj6FIKNZgMF9821KFX4qT9+DzGTQ0Ch09HtKxh+eYxMxFcv8VFHhh
 SG4HmhLaSs6crR95uJpE
 =qKl7
 -----END PGP SIGNATURE-----

Merge tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt

- ARM: dts: mediatek: add mt6580 basic support
- Document: DT: Add bindings for mediatek MT6580 SoC Platform
- ARM: dts: mediatek mt8135: Use real UART clocks
- ARM: dts: mt8135-evbp1: Add PMIC support
- ARM: dts: mt8135: Add pmic wrapper nodes
- ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

* tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek:
  ARM: dts: mediatek: add mt6580 basic support
  Document: DT: Add bindings for mediatek MT6580 SoC Platform
  ARM: dts: mediatek mt8135: Use real UART clocks
  ARM: dts: mt8135-evbp1: Add PMIC support
  ARM: dts: mt8135: Add pmic wrapper nodes
  ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 18:16:36 +02:00
Olof Johansson
af429d9ebf - arm64: dts: mediatek: add mt6795 support
- Document: DT: Add bindings for mediatek MT6795 SoC Platform
 - arm64: dts: mediatek: Add MT8173 MMC dts
 - arm64: dts: mt8173: Add afe device node
 - arm64: dts: mt8173-evb: Add PMIC support
 - dts: mt8173-evb: Add da9211 to i2c1
 - ARM: dts: mt8173: support arm64 cpuidle-dt
 - ARM64: MediaTek MT8173: Add SCPSYS device node
 - arm64: dts: mt8173: Add I2C device node
 - arm64: dts: mt8173: Add watchdog device node
 - arm64: dts: mt8173: Add PMIC wrapper device node
 - arm64: dts: mt8173: Use real clock for UARTs
 - arm64: dts: mt8173: Add clock controller device nodes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVt2JqAAoJELQ5Ylss8dNDh28P/i+8RDwaK85GgJtC3gYmjTPU
 JwpNYbzyCD6ObhPQS7arGrn+guyVSrQid95V1YNVQJRufuHGJzRWQ7v0i8p3d144
 b3eLOWRF2Tuvx6fDy2sGHiFuWvprtpYvhiM12A8nVllUcV1HpY8nndE3Cffrx8JX
 RY2o/x62beSzzOnsXny/ye5fqVitMfoNC//b1FB5qnEs8wl+SGW3PVGBPeOsHp6T
 U+sj4A31lbKtUL5JWsaHIM/cgNrkh3NcuU1cm9p5dBGIqh2ZsuiyHyjrBoERYrbw
 nNwGlwRPIq/XosnQIr+pjlsJ4yJrYEavord8ve58N4fBD6tmeQFExEP5g1T797px
 7tL5Mw7FT95J7s1eYqtV8ZUTdvMZvLGNPGX7sQsPIezpCra9h9i0XaSkCbrsikKY
 DF0C1vtF86XS+Ki7Oxll5z3PYd1Hv8NUDl/h5o5nnFOXZz6RE2PT6mM+YUPLeA/B
 An7+GlWYe6lmcprPMNYkhf1ry0srAJKMBi1xAV2DkZKho1qNyvVQIJVEVm7m6yXp
 DqD8+gBKnbeNOs+s6h/JHDqcHVtoGgnWByMGcUcb86LJwzjKz321GEUBJJ6HMobu
 vkY379//teNbhJQz3E5BcAiYMKszc1Le8cwLGD+G5tI3toR5GRagJrQV0evS/Py4
 q2sLamn1vn03aUEvskkT
 =RiLC
 -----END PGP SIGNATURE-----

Merge tag 'v4.2-next-arm64' of https://github.com/mbgg/linux-mediatek into next/arm64

- arm64: dts: mediatek: add mt6795 support
- Document: DT: Add bindings for mediatek MT6795 SoC Platform
- arm64: dts: mediatek: Add MT8173 MMC dts
- arm64: dts: mt8173: Add afe device node
- arm64: dts: mt8173-evb: Add PMIC support
- dts: mt8173-evb: Add da9211 to i2c1
- ARM: dts: mt8173: support arm64 cpuidle-dt
- ARM64: MediaTek MT8173: Add SCPSYS device node
- arm64: dts: mt8173: Add I2C device node
- arm64: dts: mt8173: Add watchdog device node
- arm64: dts: mt8173: Add PMIC wrapper device node
- arm64: dts: mt8173: Use real clock for UARTs
- arm64: dts: mt8173: Add clock controller device nodes

* tag 'v4.2-next-arm64' of https://github.com/mbgg/linux-mediatek:
  arm64: dts: mediatek: add mt6795 support
  Document: DT: Add bindings for mediatek MT6795 SoC Platform
  arm64: dts: mediatek: Add MT8173 MMC dts
  arm64: dts: mt8173: Add afe device node
  arm64: dts: mt8173-evb: Add PMIC support
  dts: mt8173-evb: Add da9211 to i2c1
  ARM: dts: mt8173: support arm64 cpuidle-dt
  ARM64: MediaTek MT8173: Add SCPSYS device node
  arm64: dts: mt8173: Add I2C device node
  arm64: dts: mt8173: Add watchdog device node
  arm64: dts: mt8173: Add PMIC wrapper device node
  arm64: dts: mt8173: Use real clock for UARTs
  arm64: dts: mt8173: Add clock controller device nodes

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 18:16:13 +02:00
Casey Schaufler
21abb1ec41 Smack: IPv6 host labeling
IPv6 appears to be (finally) coming of age with the
influx of autonomous devices. In support of this, add
the ability to associate a Smack label with IPv6 addresses.

This patch also cleans up some of the conditional
compilation associated with the introduction of
secmark processing. It's now more obvious which bit
of code goes with which feature.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2015-07-28 06:35:21 -07:00
Kees Cook
730daa164e Yama: remove needless CONFIG_SECURITY_YAMA_STACKED
Now that minor LSMs can cleanly stack with major LSMs, remove the unneeded
config for Yama to be made to explicitly stack. Just selecting the main
Yama CONFIG will allow it to work, regardless of the major LSM. Since
distros using Yama are already forcing it to stack, this is effectively
a no-op change.

Additionally add MAINTAINERS entry.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-07-28 13:18:19 +10:00
Boris Brezillon
0817b62cc0 clk: change clk_ops' ->determine_rate() prototype
Clock rates are stored in an unsigned long field, but ->determine_rate()
(which returns a rounded rate from a requested one) returns a long
value (errors are reported using negative error codes), which can lead
to long overflow if the clock rate exceed 2Ghz.

Change ->determine_rate() prototype to return 0 or an error code, and pass
a pointer to a clk_rate_request structure containing the expected target
rate and the rate constraints imposed by clk users.

The clk_rate_request structure might be extended in the future to contain
other kind of constraints like the rounding policy, the maximum clock
inaccuracy or other things that are not yet supported by the CCF
(power consumption constraints ?).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
CC: Ralf Baechle <ralf@linux-mips.org>
CC: "Emilio López" <emilio@elopez.com.ar>
CC: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
CC: Peter De Schrijver <pdeschrijver@nvidia.com>
CC: Prashant Gaikwad <pgaikwad@nvidia.com>
CC: Stephen Warren <swarren@wwwdotorg.org>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Alexandre Courbot <gnurou@gmail.com>
CC: linux-doc@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-omap@vger.kernel.org
CC: linux-mips@linux-mips.org
CC: linux-tegra@vger.kernel.org
[sboyd@codeaurora.org: Fix parent dereference problem in
__clk_determine_rate()]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate
clocks without parents or a rate determining op]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-27 18:12:01 -07:00
Greg Kroah-Hartman
722b262c96 Merge 4.2-rc4 into usb-next
We want the USB fixes that went into that release in this branch as
well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 11:15:16 -07:00
Greg Kroah-Hartman
92311e46ec Merge 4.2-rc4 into tty-next
Other serial driver work wants to build on patches now in 4.2-rc4 so
merge the branch so this can properly happen.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 11:12:39 -07:00
Greg Kroah-Hartman
6e64e22449 Merge 4.2-rc4 into staging-next
We want the iio and other fixes in this branch as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 11:10:05 -07:00
Alban Bedel
3b6e644e65 DEVICETREE: Misc fix for the AR7100 SPI controller binding
Fix the clocks property documentation and use lower case for
hex values in the example.

Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Rob Herring <robh@kernel.org>
2015-07-27 08:24:39 -05:00
Rabin Vincent
d705073cda gpio: etraxfs: add support for ARTPEC-3
Add support for the GIO block in the ARTPEC-3 SoC.  The basic
functionality is essentialy the same as the version in the ETRAX FS,
except for a different set of ports, including a read-only port.

Cc: devicetree@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 15:02:23 +02:00
Maxime Ripard
d8323c6b03 pinctrl: sunxi: Add custom irq_domain_ops
The current interrupt parsing code was working by accident, because the
default was actually parsing the first node of interrupts.

While that was mostly working (and the flags were actually ignored), this
binding has never been documented, and doesn't work with SoCs that have
multiple interrupt banks anyway.

Add a proper interrupt xlate function, that uses the same description than
the GPIOs (<bank> <pin> <flags>), that will make things less confusing.

The EINT number will still be used as the hwirq number, but won't be
exposed through the DT.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:56:30 +02:00
Ulrich Hecht
8cd14702be gpio: rcar: Add r8a7795 (R-Car H3) support
R-Car Gen3's GPIO blocks are identical to Gen2's in every respect.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 14:51:40 +02:00
Olof Johansson
a02270836b STi DT update for v4.3, round 1.
Highlights:
 -----------
  - Add pinctrl configurations for transport stream channels
  - Add cpu-release-addr properties to STiH407 and STiH418
  - Add PWM regulator support so STIH407 family
  - Add BDISP node to STiH407
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVr5VYAAoJEMo4jShGhw+JxnsQALbgAI7tV0CzQsBf025zt/xY
 1rTZTJOkmUgi/fXmx7PPrzC7FGzhiXdqWle0aB+EwobrZTGqTWNApgedtuoEIvNA
 xNJu0Ah0EO9tTuiPJ8gzbKNOqCLM1cBmStsHDrcB/Ujq9Fbg437I9ixJGiVm6Zeh
 Inaqpa8qFaQmGQ6VZwM9LE/zfnQLJp88Es4tDzfrJTjqpQa/j1XVa5D8fierAb20
 NCBiAFZ327Ngkj3BTPgQ/SGiLHhDXfwBmJBFzTG23TlpI9LTLK6/EssLqwupYyci
 uPtaCvFqBNEa/Pw5wdTAduhc3B7qg6pc8mvQXZRxyqb/WysqvIdNMYXoH7sYhTVU
 S7nyqHYQ9IYzIXGFcPojLlcCEj06dyxgRrzAD9d4Omju4ssOVk9ezwfdlTeKiGc/
 sLwUs6dedPpmDX1gq7RFJ1U4SOtJ3gUNxy+pJ5OcWU+sOIa8xAsXMmsGBs2tqu/3
 c/ToZ3c4slQT+LdQoN6jnYoKUQGaGfaWjb8mgwRz++PnEjzTuByDq9HlDK37qhPB
 85NqRKtP8XPUaMWZs4LAwuLVKy+b2Mqbd6SMQDwYS+yxGLjVLKGGoTn23ik3QTGQ
 crkar8kYG2gfHnp0jEQkjRH3y6KBv/paXyQeGnYdV2K8BA6a+1oQdNDiJ5mjvoiX
 Q9duNGgZuGmeHhulcaLT
 =uzZL
 -----END PGP SIGNATURE-----

Merge tag 'sti-dt-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt

STi DT update for v4.3, round 1.

Highlights:
-----------
 - Add pinctrl configurations for transport stream channels
 - Add cpu-release-addr properties to STiH407 and STiH418
 - Add PWM regulator support so STIH407 family
 - Add BDISP node to STiH407

* tag 'sti-dt-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
  ARM: DT: STiH410: Add bdisp dt nodes
  ARM: STi: STiH407: Add PWM Regulator node
  ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-family
  ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x
  ARM: STi: DT: STiH418: Add cpu-release-addr dt property.
  ARM: STi: DT: STiH407: Add cpu-release-addr dt property.
  ARM: STi: DT: Add STiH407 family mtsin0 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsout1 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsout0 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsin5 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsin4 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsin3 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsin2 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsin1 pinctrl configuration
  ARM: STi: DT: Add STiH407 family tsin0 pinctrl configuration

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27 14:23:46 +02:00
Uwe Kleine-König
bb379ceb8d dt-bindings: gpio: document bindings supported by gpio-mpc8xxx.c
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 13:53:37 +02:00
Baruch Siach
cbc59e26e9 pinctrl: dt-binding: document Conexant CX92755 SoC
Add pinctrl device tree binding documentation for the General Purpose Pin
Mapping module of the Conexant CX92755 SoC.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-27 11:46:30 +02:00
Daniel Vetter
3271dca483 drm/i915: kerneldoc for tiling IOCTL and swizzle functions
Chris rightfully suggested that documenting fences without documenting
the BO tiling tracking doesn't make much sense, so fix that.

The important bit to stress here (since it lead to some confusion) is
the GEM doesn't really care about tiling. Except for a few select cases
where the kernel needs to manage something that userspace can't take
care of: Namely the limited number of fences and fixing up swizzling,
although we still fail at the later.

v2: Move the low-level tiling/swizzling functions and kerneldoc to
i915_gem_fence.c and leave only the userspace interface here.
Suggested by Chris.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-07-27 10:26:30 +02:00
Daniel Vetter
e562b9739e drm/i915: Remove bogus kerneldoc include directive
Afaict intel_irq_fini never existed. No idea how that one came
about.

Note: Chris thinks that an irq_fini would be nice and I agree, but
this is just to remove some ugly from generated docs.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-27 10:25:14 +02:00
Daniel Vetter
a794f62a30 drm/i915: kerneldoc for fences
v2: Clarify that this is about fence _registers_. Also clarify that
the fence code revokes cpu ptes and not gtt ptes. Both suggested by
Chris.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-07-27 10:25:06 +02:00
Hans de Goede
8665c18bec phy-sun4i-usb: Add support for monitoring vbus via a power-supply
On some boards there is no vbus_det gpio pin, instead vbus-detection for
otg can be done via the pmic.

This commit adds support for monitoring vbus_det via the power_supply
exported by the pmic, enabling support for otg on these boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede
fc1f45ed30 phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC
The usb-phys on the sun8i-a33 SoC are mostly the same as sun8i-a23 but for
some reason (hw bug?) the phyctl register was moved to a different address
and is not initialized to 0 on reset.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede
123dfdbcfa phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC
The usb-phys on the sun8i-a23 SoC have the same setup wrt clocks as on the
sun6i-a31 SoC, but there are only 2 instead of 3 like on the sun5i-a13 SoC.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Hans de Goede
d2332303ef phy-sun4i-usb: Add id and vbus detection support for the otg phy (phy0)
The usb0 phy is connected to an OTG controller, and as such needs some special
handling:

1) It allows explicit control over the pullups, enable these on phy_init and
disable them on phy_exit.

2) It has bits to signal id and vbus detect to the musb-core, add support for
for monitoring id and vbus detect gpio-s for use in dual role mode, and set
these bits to the correct values for operating in host only mode when no
gpios are specified in the devicetree.

While updating the devicetree binding documentation also add documentation
for the sofar undocumented usage of regulators for vbus for all 3 phys.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:47 +05:30
Joachim Eastwood
2d69a115a9 phy: dt bindings: add NXP LPC18xx/43xx USB OTG PHY bindings
Add binding documentation for NXP LPC18xx/43xx USB OTG PHY. This
PHY can found on NXP LPC18xx and LPC43xx devices with USB support.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-07-25 15:45:46 +05:30
Sebastian Herbszt
c4cfdd81c8 Documentation/target: Fix tcm_mod_builder.py build breakage
Fix build breakage and set the protocol identifier based on the parameter.

Fixes: 9ac8928e6a ("target: simplify the target template registration API")
Fixes: e4aae5af81 ("target: change core_tpg_register prototype")

Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-24 17:48:55 -07:00
Linus Torvalds
1e63dca76a MMC core:
- Fix a reference inbalance issue for power_ro_lock_show() sysfs handler
 
 MMC host:
  - omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC
  - sdhci: Prevent a kernel panic while using DMA
  - mtk-sd: Let it depend on HAS_DMA to prevent build errors
  - sdhci-esdhc: Make 8BIT bus work
  - sdhci-esdhc-imx: Fix some regressions for DT based platforms
  - sdhci-pxav3: Fix a regression for DT based platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVsflkAAoJEP4mhCVzWIwpW6EP/jDb41+bvVv9Yuua10z1wD5C
 +cVn5w2hMyZH982lnba526HJ7LmmmO3Pe5ZLN27Z6Z5Di4vTzTv7zmoP3e59Vkgo
 m62utgbMksxpywLVAJEakoA5bmbSoTkuCjvLdXAyMtmzkwDx0djake/DJ9uzOWX5
 qlfzPljD+6IXPVBG/z5hzpz3XWWitf4n/olVE+wuLP8hdKRpNVNtHNfP3d7p/2Xf
 LZQ9I0zcmktVvaP0fScKvmv20vqtn1T3EHmXii2RqML/dwNvl/5hFIpS8+nXXfYW
 nT+5HWHJokXsYBQx+UaveVCiRvT2y1VBCT0Wj9ztuUkBWx5URuXJE9Evmh2nUTSj
 mI7eNjIiZ+DoKfN++cVanBfvUmCjukDXHJjN+NsmywHrdUVAfBengLTmdOvOlTD9
 C+sMVv6uDmlfjq/Ed16Mi1UTRr7Nv9BJWDhVoI4ZSzrOY+ayYw+7W/3oMyqajoDT
 19NXU5hZqeEnYkhQ6lq3DjL7TSV9sEx2hMCDdhuNrQJ34hcatake7zcVYECpJSrB
 6NgPFjc/qnSf42L49HhpaSa2mx7EQBWL5yXX5vmOFRZ8aL5xKCtBaoP8Wo5n4eiG
 JVg4y0qw7p8XSlN88cIHUy4VRn8HJ6gpJOa4S5RtAfM6gmozjZM5+FeXNxSLFLri
 s4ymGZ3tr6vp+LZ6Q6Me
 =Bk8L
 -----END PGP SIGNATURE-----

Merge tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.2 rc4.

  Note, most of the changes are for the sdhci-esdhc-imx controller,
  which also required us to modify some related DTS files.  Those
  changes have been acked by the SoC maintainer.

  MMC core:
   - Fix a reference inbalance issue for power_ro_lock_show() sysfs handler

  MMC host:
   - omap_hsmmc: Fix IRQ errorhandling for CD, DTO, and CRC
   - sdhci: Prevent a kernel panic while using DMA
   - mtk-sd: Let it depend on HAS_DMA to prevent build errors
   - sdhci-esdhc: Make 8BIT bus work
   - sdhci-esdhc-imx: Fix some regressions for DT based platforms
   - sdhci-pxav3: Fix a regression for DT based platforms"

* tag 'mmc-4.2-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci-pxav3: fix platform_data is not initialized
  dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support
  mmc: sdhci-esdhc-imx: clear f_max in boarddata
  mmc: sdhci-esdhc-imx: remove duplicated dts parsing
  mmc: sdhci: make max-frequency property in device tree work
  mmc: sdhci-esdhc-imx: move all non dt probe code into one function
  mmc: sdhci-esdhc-imx: fix cd regression for dt platform
  dts: imx7: fix sd card gpio polarity specified in device tree
  dts: imx25: fix sd card gpio polarity specified in device tree
  dts: imx6: fix sd card gpio polarity specified in device tree
  dts: imx53: fix sd card gpio polarity specified in device tree
  dts: imx51: fix sd card gpio polarity specified in device tree
  mmc: sdhci-esdhc: Make 8BIT bus work
  mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()
  mmc: MMC_MTK should depend on HAS_DMA
  mmc: sdhci check parameters before call dma_free_coherent
  mmc: omap_hsmmc: Handle BADA, DEB and CEB interrupts
  mmc: omap_hsmmc: Fix DTO and DCRC handling
2015-07-24 16:43:16 -07:00
Azael Avalos
fc5462f852 toshiba_acpi: Add /dev/toshiba_acpi device
There were previous attempts to "merge" the toshiba SMM module to the
toshiba_acpi one, they were trying to imitate what the old toshiba
module does, however, some models (TOS1900 devices) come with a
"crippled" implementation and do not provide all the "features" a
"genuine" Toshiba BIOS does.

This patch adds a new device called toshiba_acpi, which aim is to
enable userspace to access the SMM on Toshiba laptops via ACPI calls.

Creating a new convenience _IOWR command to access the SCI functions
by opening/closing the SCI internally to avoid buggy BIOS, while at
the same time providing backwards compatibility.

Older programs (and new) who wish to access the SMM on newer models
can do it by pointing their path to /dev/toshiba_acpi (instead of
/dev/toshiba) as the toshiba.h header was modified to reflect these
changes as well as adds all the toshiba_acpi paths and command,
however, it is strongly recommended to use the new IOCTL for any
SCI command to avoid any buggy BIOS.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-07-24 14:15:10 -07:00
Stephen Boyd
e2adfacde6 regulator: qcom-spmi: Add vendor specific configuration
Add support for over current protection (OCP), pin control
selection, soft start strength, and auto-mode.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-24 18:29:45 +01:00
Stephen Boyd
3a003baeec regulator: Add over current protection (OCP) support
Some regulators can automatically shut down when they detect an
over current event. Add an op (set_over_current_protection) and a
DT property + constraint to support this capability.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-24 18:28:46 +01:00
Franklin S Cooper Jr
fa466c9197 spi: davinci: Choose correct pre-scaler limit based on SOC
Currently the pre-scaler limit is incorrect. The value differs slightly
for various devices so a single value can't be used. Using the compatible
field select the correct pre-scaler limit.

Add new compatible field value for Keystone devices to support their
unique pre-scaler limit value.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-24 17:35:51 +01:00
Mark Brown
c8a075ab1e Merge remote-tracking branches 'asoc/fix/fsl-ssi', 'asoc/fix/intel', 'asoc/fix/intel-kconfig' and 'asoc/fix/mediatek' into asoc-linus 2015-07-24 16:18:20 +01:00
Johannes Thumshirn
7c97211b61 Documentation: Minor changes to men-chameleon-bus.txt
Change men-chameleon-bus.txt according to the comments made by Randy Dunlap in
https://lkml.org/lkml/2015/7/17/691.

These are:
* Some minor gramatical changes
* Spelling fixes
* Write the word "Chameleon" capitalized throughout the whole document
* Explain MEN as MEN Mikro Elektronik GmbH.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-24 15:15:17 +02:00
Benjamin Herr
013542caa8 Doc: fix trivial typo in SubmittingPatches
This patch changes the tense of a verb in SubmittingPatches to ensure
grammatical validity of the containing sentence.

Signed-off-by: Benjamin Herr <ben@0x539.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-24 15:14:17 +02:00
Jim Davis
fce96568f3 Documentation: installed man pages don't need to be executable
Install the man pages with mode 644 instead of 755

Signed-off-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-24 15:05:57 +02:00
Ahmed Mohamed Abd EL Mawgood
3d5583cc82 fix Evolution submenu name in email-clients.txt
I have noticed that there is no submenu in Evolution called Heading
instead there is Paragraph style

Signed-off-by: Ahmed Mohamed <ahmedsoliman0x666@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-24 15:05:57 +02:00
Johannes Thumshirn
b9f2f4594c Documentation: Add MCB documentation
Add basic introductory documentation for the MEN Chameleon Bus.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-24 15:05:56 +02:00
Wang Long
9e1aa7c888 Documentation: Update filesystems/debugfs.txt
This patch update the Documentation/filesystems/debugfs.txt
file. The main work is to add the description of the following
functions:
    debugfs_create_atomic_t
    debugfs_create_u32_array
    debugfs_create_devm_seqfile
    debugfs_create_file_size

Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-24 15:05:56 +02:00
Rabin Vincent
a10726bb54 Documentation: mm: fix location of extfrag_index
/proc/extfrag_index does not exist.  This file is in debugfs.  Fix the
description of extfrag_threshold to reflect this.

Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-24 15:05:56 +02:00
Henry Chen
678cdb2fbd regulator: mt6311: Add document for mt6311 regulator
This patch adds a list of supported regulator names to the devicetree
binding documentation for Mediatek MT6311 PMIC.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-24 12:30:26 +01:00
Dong Aisheng
cae13e792f dts: mmc: fsl-imx-esdhc: remove fsl,cd-controller support
It's not supported by driver anymore after using runtime pm
and there's no user of it, so delete it now.

Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
Reviewed-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-07-24 10:18:39 +02:00
Dave Airlie
f60de97674 Merge tag 'drm-intel-next-2015-07-17' of git://anongit.freedesktop.org/drm-intel into drm-next
- prelim hw support dropped for skl after Damien fixed an ABI issue around
  planes
- legacy modesetting is done using atomic infrastructure now (Maarten)!
- more gen9 workarounds (Arun&Nick)
- MOCS programming (cache control for better performance) for skl/bxt
- vlv/chv dpll improvements (Ville)
- PSR fixes from Rodrigo
- fbc improvements from Paulo
- plumb requests into execlist submit functions (Mika)
- opregion code cleanup from Jani
- resource streamer support from Abdiel for mesa
- final fixes for 12bpc hdmi + enabling support from Ville
drm-intel-next-2015-07-03:
- dsi improvements (Gaurav)
- bxt ddi dpll hw state readout (Imre)
- chv dvfs support and overall wm improvements for both vlv and chv (Ville)
- ppgtt polish from Mika and Michel
- cdclk support for bxt (Bob Pauwe)
- make frontbuffer tracking more precise
- OLR removal (John Harrison)
- per-ctx WA batch buffer support (Arun Siluvery)
- remvoe KMS Kconfig option (Chris)
- more hpd handling refactoring from Jani
- use atomic states throughout modeset code and integrate with atomic plane
  update (Maarten)
drm-intel-next-2015-06-19:
- refactoring hpd irq handlers (Jani)
- polish skl dpll code a bit (Damien)
- dynamic cdclk adjustement (Ville & Mika)
- fix up 12bpc hdmi and enable it for real again (Ville)
- extend hsw cmd parser to be useful for atomic configuration (Franscico Jerez)
- even more atomic conversion and rolling state handling out across modeset code
  from Maarten & Ander
- fix DRRS idleness detection (Ramalingam)
- clean up dsp address alignment handling (Ville)
- some fbc cleanup patches from Paulo
- prevent hard-hangs when trying to reset the gpu on skl (Mika)

* tag 'drm-intel-next-2015-07-17' of git://anongit.freedesktop.org/drm-intel: (386 commits)
  drm/i915: Update DRIVER_DATE to 20150717
  drm/i915/skl: Drop the preliminary_hw_support flag
  drm/i915/skl: Don't expose the top most plane on gen9 display
  drm/i915: Fix divide by zero on watermark update
  drm/i915: Invert fastboot check
  drm/i915: Clarify logic for initial modeset
  drm/i915: Unconditionally check gmch pfit state
  drm/i915: always disable irqs in intel_pipe_update_start
  drm/i915: Remove use of runtime pm in atomic commit functions
  drm/i915: Call plane update functions directly from intel_atomic_commit.
  drm/i915: Use full atomic modeset.
  drm/i915/gen9: Add WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
  drm/i915/gen9: Add WaFlushCoherentL3CacheLinesAtContextSwitch workaround
  drm/i915/gen9: Add WaDisableCtxRestoreArbitration workaround
  drm/i915: Enable WA batch buffers for Gen9
  drm/i915/gen9: Implement WaDisableKillLogic for gen 9
  drm/i915: Use expcitly fixed type in compat32 structs
  drm/i915: Fix noatomic crtc disabling, v2.
  drm/i915: fill in more mode members
  drm/i915: Added BXT check in HAS_CORE_RING_FREQ macro
  ...
2015-07-24 14:29:06 +10:00