Commit graph

27,507 commits

Author SHA1 Message Date
Christophe Ricard
ed06aeefda nfc: st-nci: Rename st21nfcb to st-nci
STMicroelectronics NFC NCI chips family is extending
with the new ST21NFCC using the AMS AS39230 RF booster.
The st21nfcb driver is relevant for this solution and
might be with future products.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-10 12:51:44 +02:00
Thomas Petazzoni
5cc0de1faf pinctrl: mvebu: armada-39x: align NAND pin naming
All SoCs use "nand" to designate NAND pins, only Armada 39x is using
"nd", which is not consistent. This commit fixes that by renaming the
corresponding functions.

It also changes the subnames from rbn0/rbn1 to rb0/rb1, to respect the
convention used everywhere that we don't encode the 'n' part of signal
names.

While this commit changes the main name of function, therefore
potentially breaking the DT compatibility, this is not a problem since
Armada 39x is a brand new SoC which isn't used in production yet.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 11:11:39 +02:00
Thomas Petazzoni
7bd6a26db6 pinctrl: mvebu: armada-{370,375,38x,39x}: normalize dev pins
This commit modifies the definition of the Device Bus interface pins
to be consistent accross SoCs. Especially, it removes the 'n'
indicators that we don't encode in the subnames of pins:

   'dev(wen0)' becomes 'dev(we0)'
   'dev(wen1)' becomes 'dev(we1)'
   'dev(oen)' becomes 'dev(oe)'
   etc.

In addition, it fixes the Armada 375 DT binding documentation, which
forgot to document the 'dev' function for MPP46, MPP57 and MPP63.

Since only the subnames are changed, this commit does not affect DT
compatibility.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 11:10:34 +02:00
Thomas Petazzoni
ddf3f19e21 pinctrl: mvebu: armada-39x: normalize SDIO pin naming
In order to be consistent with the datasheet and some other SoCs, this
commit renames the SDIO pins of the Armada 39x from "sd" to "sd0".

While this changes the DT binding, this is not a problem since Armada
39x is a brand new SoC which isn't used in production yet (so now is
the right time to fix such things).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 11:09:33 +02:00
Thomas Petazzoni
52f83174b3 pinctrl: mvebu: armada-39x: normalize SATA present functionality naming
This commit makes the naming of SATA related MPP functions consistent
accross SoCs by adjusting the Armada 39x definition to use "prsnt"
instead of "present".

Since only the subnames are changed, the DT binding is not modified at
all.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 11:08:37 +02:00
Thomas Petazzoni
100dc5d840 pinctrl: mvebu: armada-{38x,39x,xp}: normalize naming of DRAM functions
This commit makes the dram functions naming (both the name and
subname) consistent accross SoC, by using:

  dram(vttctrl)
  dram(deccerr)

in all Marvell SoCs.

Due to the change to the name, it changes the DT binding, but these
functions are not used by any in-tree Device Tree file, and are very
unlikely to be used by anyone.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 11:07:36 +02:00
Thomas Petazzoni
9540cf5344 pinctrl: mvebu: armada-{375,38x,39x}: normalize naming of PTP subnames
The subnames are purely informative, but it's nicer when they match
accross SoCs. This commit adjusts the Armada 375, Armada 38x and
Armada 39x MPP definitions so that the subnames of the PTP pins match
the ones used on Armada XP and Kirkwood.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:58:24 +02:00
Thomas Petazzoni
ea78b9511a pinctrl: mvebu: armada-xp: fix functions of MPP48
There was a mistake in the definition of the functions for MPP48 on
Marvell Armada XP. The second function is dev(clkout), and not tclk.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 463e270f76 ("pinctrl: mvebu: add pinctrl driver for Armada XP")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:55:59 +02:00
Thomas Petazzoni
80b3d04fea pinctrl: mvebu: armada-xp: remove non-existing VDD cpu_pd functions
The latest version of the Armada XP datasheet no longer documents the
VDD cpu_pd functions, which might indicate they are not working and/or
not supported. This commit ensures the pinctrl driver matches the
datasheet.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 463e270f76 ("pinctrl: mvebu: add pinctrl driver for Armada XP")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:55:01 +02:00
Thomas Petazzoni
bc99357f36 pinctrl: mvebu: armada-xp: remove non-existing NAND pins
After updating to a more recent version of the Armada XP datasheet, we
realized that some of the pins documented as having a NAND-related
functionality in fact did not have such functionality. This commit
updates the pinctrl driver accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 463e270f76 ("pinctrl: mvebu: add pinctrl driver for Armada XP")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:54:30 +02:00
Thomas Petazzoni
e5447d2609 pinctrl: mvebu: armada-375: remove non-existing NAND re/we pins
After updating to a more recent version of the Armada 375, we realized
that some of the pins documented as having a NAND-related
functionality in fact did not have such functionality. This commit
updates the pinctrl driver accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.15+
Fixes: ce3ed59dcd ("pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 375")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:53:34 +02:00
Thomas Petazzoni
438881dfdd pinctrl: mvebu: armada-370: fix spi0 pin description
Due to a mistake, the CS0 and CS1 SPI0 functions were incorrectly
named "spi0-1" instead of just "spi0". This commit fixes that.

This DT binding change does not affect any of the in-tree users.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 5f597bb2be ("pinctrl: mvebu: add pinctrl driver for Armada 370")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:51:45 +02:00
Thomas Petazzoni
331642fbf2 pinctrl: mvebu: armada-38x: fix PCIe functions
A new revision of the Marvell Armada 38x hardware datasheet unveiled
that the definition of some of the PCIe functions were not
correct. This commit fixes the pinctrl driver accordingly.

Some PCIe functions simply do not exist, some of the PCIe functions in
fact were corresponding to other functions, and some PCIe functions
have been added.

Note: the seemingly unrelated removal of spi(cs2) on MPP47 is related:
this function is in fact implemented on MPP43, instead of a PCIe
function.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.15+
Fixes: ca6d9a084b ("pinctrl: mvebu: add pin-muxing driver for the Marvell Armada 380/385")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:50:36 +02:00
Bjorn Andersson
1bb6fad359 pinctrl: dt-binding: Add DT binding documentation for MSM8660
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 10:19:18 +02:00
Anurag Kumar Vulisha
bdf7a4ae37 gpio: Added support to Zynq Ultrascale+ MPSoC
Added support to Zynq Ultrascale+ MPSoC on the existing zynq
gpio driver.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 09:44:17 +02:00
Rabin Vincent
d342571efe gpio: add ETRAXFS GPIO driver
Add a GPIO driver for the General I/O block on Axis ETRAX FS SoCs.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-06-10 09:11:10 +02:00
Tony Lindgren
63e63a1981 Merge branch 'wakeirq-8250' into omap-for-v4.2/wakeirq-v2 2015-06-09 23:37:31 -07:00
Suneel Garapati
03a740fb68 devicetree:bindings: add devicetree bindings for ceva ahci
adds bindings for CEVA AHCI SATA controller. optional property
broken-gen2 is useful incase of hardware speed limitation.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-10 11:15:17 +09:00
Mauro Carvalho Chehab
bba795fc0e [media] Documentation: update cardlists
The card lists at Documentation/video4linux are missing some
boards. Add them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 18:43:47 -03:00
Dmitry Eremin-Solenikov
de983454d6 [media] saa7134: add AverMedia AverTV/505 card support
Add AverMedia AverTV/505 card to saa7134 driver. It is a card bearing
SAA7130HL chip and FQ1216ME/IH-3 tuner.

Working: Composite, TV and IR remote control.
Untested: S-Video.

[mchehab@osg.samsung.com: fix CodingStyle]
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 18:43:00 -03:00
Fabien Dessenne
5a54cd2a3f [media] bdisp: add DT bindings documentation
This adds DT binding documentation for STMicroelectronics bdisp driver.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:54:09 -03:00
Mauro Carvalho Chehab
6eab8043f9 [media] DocBook: Change format for enum dmx_output documentation
Use a table for the Demux output. No new information added
here. They were all merged inside the table.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:38 -03:00
Mauro Carvalho Chehab
429c2024cb [media] DocBook: Remove comments before parsing enum values
The comments may affect enum value parsing. Use cpp to remove
them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:36 -03:00
Mauro Carvalho Chehab
fe557e40f5 [media] DocBook: add xrefs for enum fe_type
The only enum that was missing xrefs at frontend.h is fe_type.
Add xrefs for them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:35 -03:00
Mauro Carvalho Chehab
d21ddba826 [media] DocBook: properly document the delivery systems
Use a table for the delivery systems. The table is organized
by the type (cable, satellite, terrestrial) and shows what
standards are not fully implemented.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:34 -03:00
Mauro Carvalho Chehab
b35f6ba978 [media] DocBook: better document the DVB-S2 rolloff factor
Instead of using a program listing, use a table and make clearer
what each define means.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:34 -03:00
Mauro Carvalho Chehab
ff50574c17 [media] DocBook: Remove duplicated documentation for SEC_VOLTAGE_*
The table were documented at the legacy ioctl call. Move it
to the DVBv5 ioctl, and add a cross ref link on the legacy
section.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:33 -03:00
Mauro Carvalho Chehab
448bac1031 [media] DocBook: document DVB-S2 pilot in a table
Putting it into a table allows to comment each possible
values, with makes more clear what field means.

Also, it allows to do cross-references with the frontend.h.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:33 -03:00
Mauro Carvalho Chehab
8092cd7fc6 [media] DocBook: Add documentation for ATSC M/H properties
Those data were retrieved by looking at A/153: ATSC Mobile DTV
Standard and guessing what makes more sense to each field.

Cc: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:33 -03:00
Mauro Carvalho Chehab
b69d5f265b [media] DocBook: add placeholders for ATSC M/H properties
The ATSC M/H specific properties are not properly documented.
This became crearer when converting the existing data into
tables and adding cross references.

For now, just add placeholders, as a further investigation
about the meaning of each parameter is required.

Cc: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:32 -03:00
Mauro Carvalho Chehab
2acf9146db [media] DocBook: remove a wrong cut-and-paste data
By cut-and-paste mistake, TRANSMISSION_MODE_AUTO were documented
twice, one at the wrong place.

Remove the wrong one.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:32 -03:00
Mauro Carvalho Chehab
6a5a402599 [media] DocBook: add IDs for enum fe_bandwidth
enum fe_bandwidth is documented at the frontend legacy xml
file.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:32 -03:00
Mauro Carvalho Chehab
3d6d213776 [media] DocBook: Better document DTMB time interleaving
The DTMB time interleaving was not properly documented. Add
a documentation for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:31 -03:00
Mauro Carvalho Chehab
00c91dfd7b [media] DocBook: Add entry IDs for the enums defined at dvbproperty.xml
There are lots of enums that are defined at dvbproperty.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:31 -03:00
Mauro Carvalho Chehab
8de4d9ecb7 [media] Docbook: add entry IDs for enum fe_sec_voltage
enum fe_sec_voltage is documented together with FE_SET_VOLTAGE.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:31 -03:00
Mauro Carvalho Chehab
81d6f2f8b8 [media] DocBook: add entry IDs for enum fe_sec_tone_mode
enum fe_sec_tone_mode is documented together with FE_SET_TONE.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:30 -03:00
Mauro Carvalho Chehab
e7852571a4 [media] DocBook: add entry IDs for enum fe_status
enum fe_status is documented together with FE_READ_STATUS.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:30 -03:00
Mauro Carvalho Chehab
764368ceb8 [media] DocBook: add entry IDs for enum fe_sec_mini_cmd
enum fe_sec_mini_cmd is documented together with
FE_DISEQC_SEND_BURST.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:30 -03:00
Mauro Carvalho Chehab
85cb78b564 [media] DocBook: Add entry IDs for enum fe_caps
enum fe_caps is documented at FE_GET_INFO ioctl. Add xrefs
for each entry there. This makes the hyperlinks at frontend.h
to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:29 -03:00
Mauro Carvalho Chehab
2695e66f94 [media] DocBook: handle enums on frontend.h
In order to be sure that all enum definitions will be documented,
let's parse the enum values and add xref links to them.

Lots of missing references will be risen as we miss adding
id's to those symbols at the documentation. Next patches will
fix this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:29 -03:00
Rob Herring
9d062b9b41 dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
Combine the ChipIdea USB binding into a single document to reduce
duplication and fragmentation. This marks use of the old PHY bindings as
deprecated. Future compatible bindings should use generic PHY binding.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Daniel Tang <dt.tangr@gmail.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Rob Herring
6c95ff9c1c dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
Add PHY binding for Marvell PXA1928 SOC's USB and HSIC PHYs.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Laxman Dewangan
0f7d6ece63 regulator: max8973: add support for MAX77621
Maxim MAX77621 device is high-efficiency, three-phase,
DC-DC step-down switching regulator delivers peak
output currents up to 16A. This device is extension of
MAX8973 and compatible with the register definition.

The MAX77621 has the SHUTDOWN pin which is EN pin on the
MAX8973. On MAX77621, the SHUTDOWN pin (active low) reset
device register to its POR/OTP value. The voltage output
is enabled when SHUTDONW pin is HIGH and EN bit on VOUT
register is HIGH.

For MAX8973, VOUT is enabled when EN bit or EN pin is high.

Add support of the MAX77621 device on max8973 regulator driver
with following changes:
- Make sure SHUTDOWN pin is set HIGH through GPIO calls if
  GPIO from AP connected to SHUTDOWN pin provided.
- Enable/disable the rail through register access only.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09 18:09:11 +01:00
Masanari Iida
8721fa692b Doc: sound:oss: Fix typo in sound/oss
This patch fix some spelling typo found in Documentations/sound/oss.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-09 17:23:00 +02:00
Lubomir Rintel
d4b5c782b9 dt/bindings: Add binding for the BCM2835 mailbox driver
This patch was split out of Lubomir's original mailbox patch by Eric
Anholt, and the required properties documentation and examples have
been filled out more completely and updated for the driver being
changed to expose a single channel.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Craig McGeachie <slapdau@yahoo.com.au>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2015-06-09 16:05:29 +05:30
Dave Hansen
8c3641e957 x86/mpx: Introduce a boot-time disable flag
MPX has the _potential_ to cause some issues.  Say part of your
init system tried to protect one of its components from buffer
overflows with MPX.  If there were a false positive, it's
possible that MPX could keep a system from booting.

MPX could also potentially cause performance issues since it is
present in hot paths like the unmap path.

Allow it to be disabled at boot time.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150607183702.2E8B77AB@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09 12:24:31 +02:00
Tang Yuantian
5163fb6254 ahci: added support for Freescale AHCI sata
Freescale introduced QorIQ series SOCs, like ls1021 ls2085, with AHCI
sata support. It complies with the serial ATA 3.0 specification
and the AHCI 1.3 specification.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Yuantian Tang <Yuantian.Tang@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-06-09 14:02:15 +09:00
David S. Miller
941742f497 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-06-08 20:06:56 -07:00
Jonathan Corbet
f8785d94fc Merge branch 'doc/4.2' into docs-next 2015-06-08 17:04:11 -06:00
Jonathan Corbet
8d13be5338 Merge branch 'core/documentation' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into docs-next
A week late but I managed to complete it all and moved it into Git, for better
structure and easy pulling.

Changes relative to the last submission:

  - Added higher level subsystem directories to collect features by
    subsystem:

      triton:~/tip> ls Documentation/features/
      arch-support.txt  core  debug  io  lib  list-arch.sh  locking  perf  sched  seccomp  time  vm

    each subsystem directory contains the feature directories. For example locking
    has:

      triton:~/tip> ls Documentation/features/locking/
      cmpxchg-local  lockdep  queued-rwlocks  queued-spinlocks  rwsem-optimized

    It's all pretty straightforward to navigate. Advantages are better
    visualization, plus git log is able to list changes per subsystem.

  - Prettified the visualization some more.

  - Improved/corrected the support matrices based on feedback to earlier submissions.

  - Updated the support matrices to today's linux-next, so that by the time this
    shows up in upstream in the next merge window it's really recent.
    Most notably there's a new architecture in linux-next (h8300).

This structure should address all feedback that I got and should minimize the
maintenance overhead (chance of conflicts).
2015-06-08 17:02:20 -06:00