Commit graph

27,507 commits

Author SHA1 Message Date
Takashi Iwai
967b1307b6 ALSA: hda - Rename power_mgmt flag with power_save_node
David suggested that the name "power_mgmt" is too ambiguous.  Rename
the flag with a bit clearer one "power_save_node".

Also, add the corresponding description to HD-Audio.txt, too.

Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-20 18:31:18 +01:00
Charlie Mooney
a736775db6 Input: add MT_TOOL_PALM
Currently there are only two "tools" that can be specified by a multi-touch
driver: MT_TOOL_FINGER and MT_TOOL_PEN. In working with Elan (The touch
vendor) and discussing their next-gen devices it seems that it will be
useful to have more tools so that their devices can give the upper layers
of the stack hints as to what is touching the sensor.

In particular they have new experimental firmware that can better
differentiate between palms vs fingertips and would like to plumb a patch
so that we can use their hints in higher-level gesture soft- ware.  The
firmware on the device can reasonably do a better job of palm detection
because it has access to all of the raw sensor readings as opposed to just
the width/pressure/etc that are exposed by the driver.  As such, the
firmware can characterize what a palm looks like in much finer-grained
detail and this change would allow such a device to share its findings with
the kernel.

Signed-off-by: Charlie Mooney <charliemooney@chromium.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-20 09:45:28 -07:00
Paul E. McKenney
42528795ac Merge branches 'doc.2015.02.26a', 'earlycb.2015.03.03a', 'fixes.2015.03.03a', 'gpexp.2015.02.26a', 'hotplug.2015.03.20a', 'sysidle.2015.02.26b' and 'tiny.2015.02.26a' into HEAD
doc.2015.02.26a:  Documentation changes
earlycb.2015.03.03a:  Permit early-boot RCU callbacks
fixes.2015.03.03a:  Miscellaneous fixes
gpexp.2015.02.26a:  In-kernel expediting of normal grace periods
hotplug.2015.03.20a:  CPU hotplug fixes
sysidle.2015.02.26b:  NO_HZ_FULL_SYSIDLE fixes
tiny.2015.02.26a:  TINY_RCU fixes
2015-03-20 08:31:01 -07:00
Masanari Iida
654d2e7cd1 doc:pci: Fix typo in Documentation/PCI
This patch fix spelling typo in Documentation/PCI.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:56 -06:00
Liviu Dudau
9ceae1da50 Documentation: drm: Use '->' when describing access through pointers.
The documentation is trying to describe accessing a field through a
pointer, but it is using '-<' instead of '->'. Fix that.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:56 -06:00
Leonid V. Fedorenchik
8962786ce3 Documentation: Remove mentioning of block barriers
Remove mentioning of block barriers since they were removed.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:56 -06:00
Giedrius Statkevičius
d50ca07863 Documentation/email-clients.txt: Fix one grammar mistake, add extra info about TB
Fix one grammar mistake (Allows->Allow) and add extra information about
the external editor add-on of Thunderbird: the developer must make sure
that their editor doesn't fork (IOW it mustn't return before closing)
thus they should be careful how they configure the addon. Furthermore,
add a tip how to do it with gvim.

Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
[jc: some minor wording/formatting tweaks]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Li Bin
080684c88a kprobes: Update Documentation/kprobes.txt
The patch 125e564("Move Kconfig.instrumentation to arch/Kconfig and
init/Kconfig") had removed the "Instrumentation Support" menu,
and the configurations under this had be moved to "General setup".
Update Documentation/kprobes.txt to reflect this change.

Signed-off-by: Li Bin <huawei.libin@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Wolfram Sang
80b6f38be2 Documentation: i2o: remove duplicate documentation
We can remove the i2o documentation because a) the subsystem has been
moved to staging with commit 2cbf7fe2d5 (i2o: move to staging)
anyhow and b) the here removed files are present in the subsystem
directory again. There, README even has an additional paragraph and the
ioctl docs only differ in whitespaces. Well...

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Wang Long
09207bae60 Documentation: update the CONFIG_DEBUG_PAGEALLOC description
The CONFIG_DEBUG_PAGEALLOC option now is located under "Kernel
hacking" / "Memory Debugging" / "Debug page memory allocations".
so we should update the description in kmemcheck.txt.

Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Sheng Yong
8243338058 mem-hotplug: fix typo in Documentation/memory-hotplug.txt
Fix a trivial typo in Documentation/memory-hotplug.txt.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Rasmus Villemoes
d181b71c3e doc: printk-formats: Fix %pU description
The documentation and the code disagrees; fix the former.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Valentin Rothberg
2f9d7389b5 MSI-HOWTO.txt: remove reference on IRQF_DISABLED
The IRQF_DISABLED is a NOOP and scheduled to be removed.  According to Ingo
Molnar in commit e58aa3d2d0 (genirq: Run irq
handlers with interrupts disabled), running IRQ handlers with interrupts
enabled can cause stack overflows when the interrupt line of the issuing
device is still active.

This patch removes IRQF_DISABLED from this documentation.  It was
mentioned to be a solution to avoid deadlocks when a device uses
multiple interrupts.  As the flag is a NOOP this solution does not work
anymore.

Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Ebru Akagunduz
9ddfa69fb0 doc: add information about max_ptes_none
max_ptes_none specifies how many extra small pages (that are
not already mapped) can be allocated when collapsing a group
of small pages into one large page.

/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none

A higher value leads to use additional memory for programs.
A lower value leads to gain less thp performance. Value of
max_ptes_none can waste cpu time very little, you can
ignore it.

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Wang Long
d072496155 Documentation: add print bitmap description
as the commit: "lib/vsprintf: implement bitmap printing through
'%*pb[l]'" add an easy way to print bitmaps. so printk-formats.txt
should reflect it.

Signed-off-by: Wang Long <long.wanglong@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-20 07:41:55 -06:00
Daniel Vetter
eb0b44adc0 drm/i915: kerneldoc for i915_gem_shrinker.c
And remove one bogus * from i915_gem_gtt.c since that's not a
kerneldoc there.

v2: Review from Chris:
- Clarify memory space to better distinguish from address space.
- Add note that shrink doesn't guarantee the freed memory and that
  users must fall back to shrink_all.
- Explain how pinning ties in with eviction/shrinker.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-20 11:48:16 +01:00
Daniel Vetter
0f9e9cd61f Merge tag 'drm-intel-fixes-2015-03-19' into drm-intel-next
Backmerge because of numerous and interleaving conflicts and git
rerere getting confused a bit too often.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c

All conflicts are because of -next patches backported to -fixes, so
just go with the code in -next.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-20 11:44:34 +01:00
Masanari Iida
ad4a6ebeff doc/input : Fix typos in Documentation/input
This patch fix spelling typos in Documentations/input.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-03-19 15:18:52 -06:00
David S. Miller
970282d0e1 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:

====================
pull request: bluetooth-next 2015-03-19

This wont the last 4.1 bluetooth-next pull request, but we've piled up
enough patches in less than a week that I wanted to save you from a
single huge "last-minute" pull somewhere closer to the merge window.

The main changes are:

 - Simultaneous LE & BR/EDR discovery support for HW that can do it
 - Complete LE OOB pairing support
 - More fine-grained mgmt-command access control (normal user can now do
   harmless read-only operations).
 - Added RF power amplifier support in cc2520 ieee802154 driver
 - Some cleanups/fixes in ieee802154 code

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19 15:18:04 -04:00
Rik van Riel
34ebe93341 cpuset, isolcpus: document relationship between cpusets & isolcpus
Document the subtly changed relationship between cpusets and isolcpus.
Turns out the old documentation did not match the code...

Signed-off-by: Rik van Riel <riel@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-19 14:28:20 -04:00
Sakari Ailus
7eec52db36 Documentation: DT: Add bindings for omap3isp
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 10:25:40 -07:00
David Ahern
db24a9044e net: add support for phys_port_name
Similar to port id allow netdevices to specify port names and export
the name via sysfs. Drivers can implement the netdevice operation to
assist udev in having sane default names for the devices using the
rule:

$ cat /etc/udev/rules.d/80-net-setup-link.rules
SUBSYSTEM=="net", ACTION=="add", ATTR{phys_port_name}!="",
NAME="$attr{phys_port_name}"

Use of phys_name versus phys_id was suggested-by Jiri Pirko.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 22:30:35 -04:00
Christophe Ricard
92a2c6b26b tpm/st33zp24/dts/st33zp24-spi: Add dts documentation for st33zp24 spi phy
Reviewed-by: Jason Gunthorpe <jason.gunthorpe@obsidianresearch.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2015-03-18 22:43:07 +01:00
John Fastabend
822b3b2ebf net: Add max rate tx queue attribute
This adds a tx_maxrate attribute to the tx queue sysfs entry allowing
for max-rate limiting. Along with DCB-ETS and BQL this provides another
knob to tune queue performance. The limit units are Mbps.

By default it is disabled. To disable the rate limitation after it
has been set for a queue, it should be set to zero.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 14:55:18 -04:00
Marc Zyngier
d4ad0759cd DT: exynos: update PMU binding
Document the fact that some Exynos PMUs are capable of acting as
an interrupt controller.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1426088693-15724-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-18 17:37:13 +00:00
Brad Campbell
f0b7d43c8a cc2520: Add support for CC2591 amplifier.
The TI CC2521 is an RF power amplifier that is designed to interface
with the CC2520. Conveniently, it directly interfaces with the CC2520
and does not require any pins to be connected to a
microcontroller/processor. Adding a CC2591 increases the CC2520's range,
which is useful for border router and other wall-powered applications.

Using the CC2591 with the CC2520 requires configuring the CC2520 GPIOs
that are connected to the CC2591 to correctly set the CC2591 into TX and
RX modes. Further, TI recommends that the CC2520_TXPOWER and
CC2520_AGCCTRL1 registers are set differently to maximize the CC2591's
performance. These settings are covered in TI Application Note AN065.

This patch adds an optional `amplified` field to the cc2520 entry in the
device tree. If present, the CC2520 will be configured to operate with a
CC2591.

The expected pin mapping is:
CC2520 GPIO0 --> CC2591 EN
CC2520 GPIO5 --> CC2591 PAEN

Signed-off-by: Brad Campbell <bradjc5@gmail.com>
Acked-by: Varka Bhadram <varkabhadram@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-18 17:50:25 +01:00
Keyur Chudgar
c2bc6e11bb Documentation: dtb: Add port-id field for APM X-Gene ethernet
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18 12:44:05 -04:00
Peter Chen
b0e04f852a doc: usb: usbmisc-imx: add imx6sx compatible string
Add compatible string for imx6sx-usbmisc.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 16:19:10 +01:00
Peter Chen
01e3ad863f doc: usb: chipidea: add usb wakeup enable example
Add the example for how to enable USB as system wakeup source.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18 16:19:09 +01:00
Baruch Siach
5757bfe51e pinctrl: dt-binding: fix generic pinmux/pinconf examples
pinconf_generic_dt_node_to_map() scans only subnodes of the pinctrl-0 pahndle,
not the referenced node itself. Change the example nodes to match.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 13:15:04 +01:00
Kuninori Morimoto
3cd44dcd35 dmaengine: remove Renesas Audio DMAC peri peri
Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri on DMAEngine is no longer needed. remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-03-18 13:57:54 +05:30
Mika Westerberg
56b858dfad ACPI: Update GPIO documentation to mention _DSD
Make sure that the ACPI enumeration.txt provides latest information on how
to describe and retrieve GPIOs now that we can take advantage of _DSD
device properties.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 02:02:35 +01:00
Baruch Siach
f5efed8090 pinctrl: dt-binding: fix typo
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:21 +01:00
Baruch Siach
838d030bda pinctrl: fix example .get_group_pins implementation signature
The callback function signature has changed in commit a5818a8bd0 (pinctrl:
get_group_pins() const fixes)

Fixes: a5818a8bd0 ('pinctrl: get_group_pins() const fixes')
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:20 +01:00
Ray Jui
2dffad825f pinctrl: Cygnus: define Broadcom Cygnus GPIO/PINCONF binding
Document the GPIO/PINCONF device tree binding for Broadcom Cygnus SoC

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:19 +01:00
Baruch Siach
c58e031d73 pinctrl: staticise example code funcs/structs
Make the example code consistent wrt local function and struct definitions.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:18 +01:00
Baruch Siach
b18104c000 pinctrl: remove doc mention of the enable/disable API
This API has changed in commit 6e5e959dde (pinctrl: API changes to support
multiple states per device).

Fixes: 6e5e959dde ('pinctrl: API changes to support multiple states per device')
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:18 +01:00
Baruch Siach
260463d492 pinctrl: remove enable/disable callbacks from documentation
Commit 03e9f0cac5 (pinctrl: clean up after enable refactoring) updated the
documentation to remove mention of disable(), and rename enable() to set_mux().
One in-text mention was forgotten. Fix this.

Fixes: 03e9f0cac5 ('pinctrl: clean up after enable refactoring')
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:17 +01:00
Hongzhou Yang
ddac96118f pinctrl: dt-bindings: Add pinctrl bindings for mt65xx/mt81xx.
Add devicetree bindings for Mediatek SoC pinctrl driver.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:14 +01:00
Ray Jui
3e16de16fa pinctrl: Broadcom Cygnus pinctrl device tree binding
Device tree binding documentation for Broadcom Cygnus IOMUX driver

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18 02:02:12 +01:00
Stephen Boyd
341e42c4e3 ARM: perf: Add support for Scorpion PMUs
Scorpion supports a set of local performance monitor event
selection registers (LPM) sitting behind a cp15 based interface
that extend the architected PMU events to include Scorpion CPU
and Venum VFP specific events. To use these events the user is
expected to program the lpm register with the event code shifted
into the group they care about and then point the PMNx event at
that region+group combo by writing a LPMn_GROUPx event. Add
support for this hardware.

Note: the raw event number is a pure software construct that
allows us to map the multi-dimensional number space of regions,
groups, and event codes into a flat event number space suitable
for use by the perf framework.

This is based on code originally written by Sheetal Sahasrabudhe,
Ashwin Chaugule, and Neil Leeder [1].

[1] https://www.codeaurora.org/cgit/quic/la/kernel/msm/tree/arch/arm/kernel/perf_event_msm.c?h=msm-3.4

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Neil Leeder <nleeder@codeaurora.org>
Cc: Ashwin Chaugule <ashwinc@codeaurora.org>
Cc: Sheetal Sahasrabudhe <sheetals@codeaurora.org>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-17 18:34:01 +00:00
Andrzej Hajda
472c95a6e3 dt-bindings: add asynchronous bridge clock for exynos
The patch adds bindings for clocks required by async-bridges
present in the particular power domain.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-03-18 02:14:07 +09:00
Jason J. Herne
30ee2a984f KVM: s390: Create ioctl for Getting/Setting guest storage keys
Provide the KVM_S390_GET_SKEYS and KVM_S390_SET_SKEYS ioctl which can be used
to get/set guest storage keys. This functionality is needed for live migration
of s390 guests that use storage keys.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-17 16:33:06 +01:00
Ekaterina Tumanova
e44fc8c9da KVM: s390: introduce post handlers for STSI
The Store System Information (STSI) instruction currently collects all
information it relays to the caller in the kernel. Some information,
however, is only available in user space. An example of this is the
guest name: The kernel always sets "KVMGuest", but user space knows the
actual guest name.

This patch introduces a new exit, KVM_EXIT_S390_STSI, guarded by a
capability that can be enabled by user space if it wants to be able to
insert such data. User space will be provided with the target buffer
and the requested STSI function code.

Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-17 16:26:51 +01:00
Thomas Huth
41408c28f2 KVM: s390: Add MEMOP ioctls for reading/writing guest memory
On s390, we've got to make sure to hold the IPTE lock while accessing
logical memory. So let's add an ioctl for reading and writing logical
memory to provide this feature for userspace, too.
The maximum transfer size of this call is limited to 64kB to prevent
that the guest can trigger huge copy_from/to_user transfers. QEMU
currently only requests up to one or two pages so far, so 16*4kB seems
to be a reasonable limit here.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-17 16:26:24 +01:00
Jassi Brar
ee23d66af9 mailbox: arm_mhu: add driver for ARM MHU controller
Add driver for the ARM Primecell Message-Handling-Unit(MHU) controller.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Vincent Yang <vincent.yang@socionext.com>
Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya@socionext.com>
2015-03-17 11:12:01 +05:30
Marek Belisko
624ce7616d Documentation: omap-twl4030: Move ti,codec property to optional
ti,codec property is not used in omap-twl4030 driver in linux kernel but
we keep it as optional property, so that the existing dtbs do not
become noncompliant after the change on other OS.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 19:24:52 -07:00
Matt Porter
5c8a521d44 Documentation: DT: omap_serial: document missing properties and add an example
The omap_serial.txt binding documentation lacks a number of properties
that are used in DTS files for platforms incorporating this peripheral.
Fix this by documenting the missing required and optional fields and
add an example.

Signed-off-by: Matt Porter <mporter@konsulko.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 14:59:43 -07:00
Rostislav Lisovy
1b3a62ae9c ARM: dts: Add vendor prefix for Grinn
Grinn is a company located in Poland, Europe producing
System on Modules.
Webpage: http://www.grinn-global.com/

Signed-off-by: Rostislav Lisovy <lisovy@jablotron.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-16 13:42:10 -07:00
Abhilash Kesavan
34644524bc lib: devres: add a helper function for ioremap_wc
Implement a resource managed writecombine ioremap function.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-16 21:11:32 +01:00